Documentos de Académico
Documentos de Profesional
Documentos de Cultura
C010-Ya-Cs-004001-03 Memoria de Cálculo - Cimentaciones de Hormigón
C010-Ya-Cs-004001-03 Memoria de Cálculo - Cimentaciones de Hormigón
LYNKA
03 15/Feb/2023 Third issue M. Zagaria I. Colladon
F.J. Luque
LYNKA
02 30/Ene/2023 Second issue M. Zagaria I. Colladon
F.J. Luque
LYNKA
01 31/Oct/2022 First issue M. Zagaria I. Colladon
F.J. Luque
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
ÍNDICE
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
INDICE DE TABLAS
INDICE DE IMÁGENES
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
La planta fotovoltaica La Quinta está situada en la comuna de Cabrero, provincia de Bío Bío, región
de Bío Bío, Chile. Tendrá una potencia pico de 11,05 MWp, ocupará un área aproximada de 20,61 Ha.
A continuación, se muestra una tabla con los datos de proyecto más relevantes que deben ser tenidos
en cuenta:
CARACTERÍSTICAS DE PROYECTO
Potencia Pico 11,05 MWp
Potencia CA 9 MW
Ubicación Cabrero, Bio Bío (Chile)
Longitud -72.372733°
Latitud -37.062102°
X: 733596.23 E
Y: 5895009.33 S
Coordenadas X,Y
Datum WGS 84
Huso 18H
Área total (dentro del cerco) 20,61 Ha
Altura sobre el nivel del mar 137 m.s.n.m.
1.1 OBJETO
El objeto de este documento es modelar, calcular, analizar y definir la cimentación de los Centros de
transformación (CTs) y Control Room a ejecutar en la planta fotovoltaica La Quinta ubicada en la
comuna de Cabrero, provincia de Bío Bío, región de Bío Bío, Chile.
Los resultados obtenidos quedan reflejados en los planos correspondientes, con dimensiones,
armados, despieces y detalles constructivos necesarios para la correcta ejecución de la estructura.
Además, se indican las características de los materiales empleados, acciones, coeficientes de
seguridad, hipótesis utilizadas en el cálculo, durabilidad, etc.
1.2 ALCANCE
El alcance de este documento comprende el análisis de la documentación suministrada por distintos
proveedores (fabricante del CT, oficina técnica de realización del estudio geotécnico, etc.); el análisis
y aplicación de la normativa correspondiente; el análisis de las cargas aplicables; el diseño y modelado
de la cimentación más adecuada desde el punto de vista técnico-económico; el cálculo de la
cimentación modelada; el análisis de los resultados; la completa definición de la cimentación
MOD-A4-E_Is.00
determinada, mediante planos, detalles constructivos y toda la información necesaria para ello.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
2 UBICACIÓN
El Proyecto se encuentra ubicado a unos 3,49 km al sureste del centro de la ciudad de Cabrero por
ruta Panamericana Sur, perteneciente a la comuna del mismo nombre, en la Región del Bio Bío, Chile.
La ubicación del sitio se presenta en las siguientes imágenes.
Ubicación proyecto
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Parque Solar
Fotovoltaico La Quinta
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Cabe destacar que todas las unidades de medidas utilizadas en el informe están basadas en el
Sistema Internacional de medidas (SI). Las abreviaturas empleadas en el desarrollo de la memoria se
recogen en la siguiente tabla:
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
La Planta Fotovoltaica contará con un área total de instalación de 20,61 Ha. El parque solar albergará
un total de 17.024 módulos con una potencia de 645/650/655 Wp por módulo y una capacidad total
de 11.050 kWp.
A continuación, se recogen las principales características de la instalación:
El parque fotovoltaico cuenta con un centro de transformación. En la siguiente tabla, se adjuntan los
principales parámetros:
Características
Centros transformadores Unidades Valor
principales
Potencia CC MWp 3,82
Potencia CA MVA 3,11
CU.01
Número de módulos Ud. 5.888
Número de string inverter Ud. 10
Potencia CC MWp 7,23
Potencia CA MVA 5,88
CU.02
Número de módulos Ud. 11.136
Número de string inverter Ud. 19
Tabla 5. Características subcampo que compone la planta
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
19 76 4 2432
CU.01 3,82
18 108 6 3456
19 114 6 3648
CU.02 7,23
18 234 13 7488
Tabla 6. Configuración PFV
El elemento de cimentación a diseñar deberá ser adecuado para el equipo que se va a asentar sobre
él, seleccionando la mejor solución de compromiso considerando criterios técnicos, económicos y de
ejecución.
Los Centros de Transformación para instalar, del fabricante Huawei, son el modelo JUPITER-3000K-
H1 que se muestra en la Imagen 3 y el modelo JUPITER-6000K-H1 que se muestra en la Imagen 4,
además de la caseta del Control Room en la Imagen 5. Estos CTs comprenden los equipos de
inversión, protecciones y transformación de la planta fotovoltaica.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
El CT puede considerarse como un elemento compacto único al estar todos los equipos dentro de la
misma envolvente del container.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
En la Tabla 7 se recoge la denominación completa de cada uno de los materiales a utilizar para los
elementos de cimentación.
7.1 HORMIGÓN
El hormigón estructural utilizado para los elementos de cimentación es el H25 cuya resistencia
específica a compresión debe ser, según NCh170: fc'=25 MPa. Para este caso, se ha considerado
una fracción defectuosa del 10%, un tamaño máximo nominal del árido de 20 mm para la losa de
cimentación y de 15 mm para los pilares y vigas de atado de pilares y un grado de asentamiento de
cono igual a 6.
El recubrimiento libre mínimo para hormigón vaciado en obra (no pretensado) colocado contra el suelo
y permanentemente expuesto a él y en condiciones ambientales normales debe ser, según la norma
NCh430, sección 7.7, 50 mm.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
8 INFORME GEOTÉCNICO
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
A partir de los análisis de los resultados de laboratorio y de terreno efectuados, se definen los
siguientes parámetros geotécnicos de los suelos representativos del sector.
Relleno
Parámetro H-2 H-3 estructural
compactado (**)
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Relleno
Parámetro H-2 H-3 estructural
compactado (**)
Se recomienda que el sello de fundación de las estructuras a proyectar quede sobre un relleno
estructural compactado de espesor mínimo 0,50 [m], apoyado sobre la arena con bajo a nulo contenido
de finos, color gris oscuro correspondiente al horizonte H-3 del modelo estratigráfico. Además, se
recomienda que el sello de fundación para el apoyo del relleno estructural se localice a una
profundidad de 0,60 [m] como mínimo medido desde el nivel de terreno actual, traspasando
íntegramente el horizonte H-1 y el H-2 del modelo estratigráfico, por lo que la profundidad del sello de
excavación será como mínimo de 1,10 metros medida desde nivel de terreno natural.
El sello de fundación deberá estar libre de material suelto y/o deleznable, o de otro tipo de suelo
distinto al definido.
MOD-A4-E_Is.00
Los análisis fueron realizados para el caso más desfavorable (utilizando la resistencia no drenada de
la arena del H-3), y considerando un relleno estructural estabilizado de 0,50 [m] de espesor bajo
fundación, el que se apoya sobre el horizonte H-3 del modelo estratigráfico.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Nota: La capacidad de soporte sísmica se ha considerado 1,33 veces la estática, según las
recomendaciones del International Building Code, International Code Council, Washington, DC, 2006.
Tabla 11. Capacidad de soporte para estructuras livianas, fundadas sobre relleno compactado de 0,50 [m] de
espesor, apoyado sobre el horizonte H-3 del modelo estratigráfico
Control Room
- Tensión admisible del terreno H-2 ………………………………….. 0,67 kg/cm2≈0,067 MPa
- Módulo de balasto de la losa H-2 …………………………..……..… 4.078,6 kN/m3
El sello de fundación estará en el horizonte H-2 del modelo estratigráfico, con un sello de fundación
no menor a 0,50[m] medido desde el nivel de terreno actual. El sello de excavación deberá
compactarse al menos hasta el 95% de la densidad seca del ensayo Proctor modificado, o bien, a una
densidad relativa del 80%.
La recepción de los sellos de excavación y/o fundación deberá ser realizado por un ingeniero
geotécnico.
recomendaciones del International Building Code, International Code Council, Washington, DC, 2006.
Tabla 12. Capacidad de soporte para estructuras menores, fundadas sobre el horizonte H-2 del modelo
estratigráfico
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Nota importante:
Para analizar la respuesta del terreno frente a un sismo de magnitud significativa, se recomienda
realizar ensayos de penetración estándar (SPT), lo que permitirá evaluar el potencial de
licuefacción en profundidad del subsuelo del sitio de emplazamiento de las estructuras proyectadas
(debido a la compacidad media a baja de las arenas y a la existencia de nivel freático encontrada en
superficie en las exploraciones realizadas). Con este análisis se podrán definir medidas para
mitigación de licuación de suelos, en caso de que exista este peligro geotécnico, lo que podría
modificar las especificaciones de fundaciones descritas en el informe de mecánica de suelos.
- Del análisis de licuación efectuado, el resultado más relevante para el proyecto consiste en
que para ambos sondajes los primeros 3 metros son susceptibles a licuar. Esta condición se
da tanto para un sismo de magnitud 8,5 y PGA de 0,55 g, como para un sismo de magnitud
7,5 y PGA de 0,20 g.
- Asimismo, en el sondaje S-1 (sector norte del terreno), para un sismo de magnitud 8,5 y PGA
de 0,55 g existe un horizonte entre los 4 y los 7 metros que no licúa, y entre 8 y los 10 metros
nuevamente esos horizontes son potencialmente licuables, mientras que en el sondaje S-2
(sector sur del terreno) se aprecia que en la arena únicamente a los 3 metros existe un
horizonte no licuable. En todo el resto de las profundidades ensayadas, existe riesgo de
licuación.
arena densa. Este mejoramiento podría consistir en realizar la excavación y retiro de la arena
existente bajo fundaciones, para luego volver a ser colocada, compactándola a un grado de
compacidad igual o superior al 95 % del Proctor Modificado o a una densidad relativa igual o
superior al 80 %. Una de las complejidades a resolver en esta propuesta de mejoramiento de
suelos, consiste en el desarrollo de un sistema de agotamiento de napa tal que permita realizar
las excavaciones y las faenas de compactación hasta la profundidad requerida (3 a 4 metros
desde nivel de terreno actual), considerando que la napa se encuentra prácticamente
superficial.
CONCLUSIÓN:
Las cimentaciones tanto de los Centros de Transformación, como del Control Room, se realizarán
sobre una capa de material triturado y compactado, y bajo esta una capa de Bolders Ciclópicos hasta
eliminar los primeros 3 metros de terreno actual como se indica en el anexo al informe geotécnico.
Se proyectará conforme al plano C010-YA-DC-004001 CIMIENTOS DE HORMIGÓN - DETALLES Y
ARMADURAS.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Por lo tanto, en la Tabla 14 se establece los requisitos del cemento según el grado de exposición al
que está sometido el hormigón.
Tabla 14. Requisitos del cemento para el hormigón en contacto con sulfatos
Del mismo modo, para cada grado de exposición, el hormigón debe cumplir con el requisito de
resistencia mínima especificada y con uno de los siguientes requisitos: dosis mínima de cemento o
profundidad de penetración de agua, como se indica en la Tabla 15.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Una vez identificado el tipo de terreno en la planta fotovoltaica podremos definir los siguientes
parámetros, facilitados en NCh433 de acuerdo a la tabla Nº 6.3 de la referida Norma y en la NCh2369
de acuerdo a la tabla Nº 5.4 el periodo predominante de vibración es igual al indicado en la Tabla17.
El peso de los equipos se ha obtenido del Manual, incluido en el apartado 15 de la presente memoria.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Las cargas muertas están aplicadas en los puntos de anclaje sobre los pilares o vigas de atado, como
cargas puntuales.
𝑘𝑔 𝑘𝑁
𝑆𝑈 2 𝑘𝑃𝑎 200 2
𝑚 𝑚
MOD-A4-E_Is.00
La sobrecarga de uso está aplicada en los puntos de anclaje sobre los pilares o vigas de atado, como
cargas puntuales.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Carga Carga
Uso CT Ancho CT Largo CT Área CT Puntual Puntual
[kN/m2] [m] [m] [m2] QM1 QM2
[kN] [kN]
2 2,438 6,058 14,769 3,694 7,385
9.2.2.2 VIENTO
Las cargas de viento actuantes sobre los equipos dispuestos en la cimentación se han determinado
en base a la norma NCh432, resultando una velocidad básica del viento para la ubicación del proyecto
de:
𝑣 45 𝑚/𝑠
Se han considerado dos hipótesis de carga viento, actuando en direcciones perpendiculares entre sí
y en los dos sentidos.
Las cargas de viento están aplicadas en los puntos de anclaje de los pilares, como cargas puntuales
al multiplicar la carga de viento por la superficie de actuación de esta.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Imagen 10 Cargas de viento aplicadas en los puntos de anclaje de los pilares de los CTs
9.2.2.3 NIEVE
La carga de nieve se ha determinado en base a la norma NCh431.Of2010, obteniéndose una carga
de nieve básica para una altitud sobre el nivel del mar de 137 m. de:
𝑝 0,25 𝑘𝑁/𝑚
La sobrecarga de nieve está aplicada en los puntos de anclaje sobre los pilares o vigas de atado,
como cargas puntuales.
Carga Carga
Nieve CT Ancho CT Largo CT Área CT
Puntual N1 Puntual N2
[kN/m2] [m] [m] [m2]
[kN] [kN]
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
2 𝐴
𝐶
3 𝑔
Adicionalmente, se debe tener en cuenta el tipo de suelo donde se va a ejecutar el proyecto. En base
a los datos del geotécnico, el terreno del proyecto se clasifica como tipo C (NCh2369, Tabla 5.3). A
este suelo le corresponden unos parámetros particulares que se han de considerar en el cálculo de la
acción sísmica (NCh2369, Tabla 5.4), cuyos datos se reflejan en la Tabla 14 de la presente memoria.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Carga
Peso Caseta Ancho Largo Área
Superficial
Control Room [m] [m] [m2]
[kN/m2]
7 2 3 6,000 1,167
Imagen 13 Cargas muertas aplicadas al Control Room
𝑘𝑔 𝑘𝑁
𝑆𝑈 4 𝑘𝑃𝑎 400 4
𝑚 𝑚
10.2.2.2 VIENTO
Las cargas de viento actuantes sobre los equipos dispuestos en la cimentación se han determinado
en base a la norma NCh432, resultando una velocidad básica del viento para la ubicación del proyecto
de:
𝑣 45 𝑚/𝑠
Se han considerado dos hipótesis de carga viento, actuando en direcciones perpendiculares entre sí
y en los dos sentidos.
Las cargas de viento están aplicadas en los puntos de anclaje de los pilares, como cargas puntuales
al multiplicar la carga de viento por la superficie de actuación de esta.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Imagen 14 Cargas de viento aplicadas en los extremos de la caseta del Control Room
10.2.2.3 NIEVE
La carga de nieve se ha determinado en base a la norma NCh431.Of2010, obteniéndose una carga
de nieve básica para una altitud sobre el nivel del mar de 305 m. de:
𝑝 0,25 𝑘𝑁/𝑚
11 SOFTWARE DE CÁLCULO
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Dado que las cimentaciones que se proponen para los Centros de Transformación HUAWEI JUPITER-
3000K-H1 y JUPITER-6000K-H1 serán idénticas, se va a proceder a realizar el cálculo y comprobación
de la cimentación asociada al modelo JUPITER-6000K-H1 por ser el que cuenta con mayores cargas
asociadas, entendiéndose válida de igual forma para el modelo JUPITER-3000K-H1 al quedar del lado
de la seguridad.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
12.2.1 GRAVITATORIAS
12.2.2 VIENTO
Se ha tenido en cuenta la acción del viento mediante cargas aplicadas en las siguientes hipótesis: 'V
(0º)', 'V (90º)', 'V (180º)' y 'V (270º)'.
12.2.3 SISMO
Norma utilizada: NCh2369
Norma Chilena Oficial
Diseño Sísmico de Edificios
Diseño Sísmico de Estructuras e Instalaciones Industriales
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Referencia pilar Dirección de la carga Tipo de carga Hipótesis Valor Cota (m)
F3 Y General Carga uniforme Cargas muertas -7.52 kN/m Desde: 0.00 Hasta: 1.35
F4 Y General Carga uniforme Cargas muertas 7.52 kN/m Desde: 0.00 Hasta: 1.35
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
j 1
Gj Gkj PPk QiQki
i1
- Situaciones sísmicas
j 1
Gj Gkj PPk AE A E QiQki
i 1
- Donde:
Gk Acción permanente
Pk Acción de pretensado
Qk Acción variable
AE Acción sísmica
G Coeficiente parcial de seguridad de las acciones permanentes
P Coeficiente parcial de seguridad de la acción de pretensado
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Para cada situación de proyecto y estado límite los coeficientes a utilizar serán:
E.L.U. de rotura. Hormigón: NCh430.Of2008, Dº60:2011
E.L.U. de rotura. Hormigón en cimentaciones: NCh430.Of2008, Dº60:2011
(9-1)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.400 1.400
Sobrecarga (Q)
Viento (Q)
Nieve (Q)
(9-2 Lr)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 1.600
Viento (Q)
Nieve (Q)
(9-2 S)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 1.600
Viento (Q)
Nieve (Q) 0.000 0.500
(9-3 Lr, L)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q)
Nieve (Q)
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
(9-3 S, L)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q)
Nieve (Q) 1.600 1.600
(9-3 Lr, W)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q)
Viento (Q) 0.000 0.800
Nieve (Q)
(9-3 S, W)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q)
Viento (Q) 0.000 0.800
Nieve (Q) 1.600 1.600
(9-4 Lr)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q) 1.600 1.600
Nieve (Q)
(9-4 S)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q) 1.600 1.600
Nieve (Q) 0.000 0.500
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
(9-5)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q)
Nieve (Q) 0.000 0.200
Sismo (E) -1.400 1.400
(9-6)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 0.900 0.900
Sobrecarga (Q)
Viento (Q) 0.000 1.600
Nieve (Q)
(9-7)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 0.900 0.900
Sobrecarga (Q)
Viento (Q)
Nieve (Q)
Sismo (E) -1.400 1.400
Sísmica
Coeficientes parciales de seguridad ()
Favorable Desfavorable
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Desplazamientos
Sísmica
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.000 1.000
Sobrecarga (Q) 0.000 1.000
Viento (Q)
Nieve (Q) 0.000 1.000
Sismo (E) -1.000 1.000
12.4.2 COMBINACIONES
- Nombres de las hipótesis
PP Peso propio
CM Cargas muertas
Qa Sobrecarga de uso
V (0º) V (0º)
V (90º) V (90º)
V (180º) V (180º)
V (270º) V (270º)
N1 N1
SX 1 Sismo X 1
SX 2 Sismo X 2
SY 1 Sismo Y 1
SY 2 Sismo Y 2
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Losas cimentación Canto (cm) Módulo balasto (kN/m³) Tensión admisible Tensión admisible
en situaciones en situaciones
persistentes (MPa) accidentales (MPa)
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
fyk
Elemento Acero s
(MPa)
Todos A-63-42H 412 1.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Sistema estructural
RX: Factor de modificación de la respuesta estático (X) (NCh2369) RX : 7.00
RY: Factor de modificación de la respuesta estático (Y) (NCh2369) RY : 7.00
Parámetros de cálculo
Fracción de sobrecarga de uso : 0.50
Fracción de sobrecarga de nieve : 0.50
Factor multiplicador del espectro : 1.00
Direcciones de análisis
Acción sísmica según X
Acción sísmica según Y
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coef.Amplificación:
n
T '
S ae I 2, 75 S A0
T
I S A0 / 6 S ae (Cmax R) I
Donde:
(Cmax R ) MAX (Cmax, x Rx ; Cmax, y Ry )
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
El espectro de diseño sísmico se obtiene reduciendo el espectro elástico por el coeficiente (R)
correspondiente a cada dirección de análisis.
I 2, 75 S A0 T '
n
Sa I S A0 / 6 S a Cmax I
R T
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
n
P p
i 1
i
pi
Planta
(kN)
Baja 351.683
P=pi 351.683
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
pi ꞏAi
Ci n
p ꞏA
j 1
j j
pi zi
Planta Ci
(kN) (m)
Baja 351.683 1.35 1.000
Qi,y Ci VS,y
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X y Coord. Y son coordenadas generales. Los esfuerzos están referidos a los ejes locales de
la malla correspondiente.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Mín. 1.7400 -13.9658 -5.0648 -16.1054 -0.7002 Mín. 14.1687 -31.8182 -17.1048 -0.3218 -8.8734
Dif. 7.6073 27.9442 4.3845 7.8347 1.4058 Dif. 9.2489 41.9010 20.1506 1.2495 14.3179
0.259 1.527 Máx. 10.9674 8.3552 -0.5158 -5.3209 -0.0094 0.759 0.050 Máx. 18.6931 16.8212 -0.7692 0.2133 8.3551
Mín. 1.6254 -21.2100 -5.5421 -17.4242 -2.7104 Mín. 3.5239 -3.3844 -19.6850 -0.5348 -4.1342
Dif. 9.3420 29.5652 5.0263 12.1033 2.7011 Dif. 15.1691 20.2056 18.9158 0.7481 12.4893
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
0.759 0.277 Máx. 18.6931 14.7553 -0.7692 1.7217 8.3093 1.259 1.027 Máx. -1.2813 6.1369 -3.5477 -4.6436 2.3918
Mín. 3.5239 -1.0347 -19.6850 -7.1479 -3.8472 Mín. -6.8722 -2.7048 -14.1101 -9.8653 -2.1780
Dif. 15.1691 15.7900 18.9158 8.8696 12.1564 Dif. 5.5909 8.8416 10.5624 5.2217 4.5698
0.759 0.527 Máx. 9.1324 10.4943 -1.3784 1.3750 6.3083 1.259 1.277 Máx. -1.6095 4.5482 -3.4778 -5.9259 2.1179
Mín. 4.6466 2.5325 -17.5311 -11.2936 -2.1689 Mín. -6.6480 -4.5453 -13.6148 -10.2005 -2.1130
Dif. 4.4858 7.9618 16.1527 12.6685 8.4771 Dif. 5.0386 9.0935 10.1370 4.2747 4.2309
0.759 0.777 Máx. 7.5321 9.5996 -1.8654 -1.0949 4.1393 1.259 1.527 Máx. -1.2836 2.7058 -3.5455 -4.6458 2.1827
Mín. 1.4158 0.4374 -15.3263 -13.0280 -0.9308 Mín. -6.8753 -6.1355 -14.1072 -9.8683 -2.3855
Dif. 6.1163 9.1622 13.4609 11.9330 5.0700 Dif. 5.5917 8.8413 10.5617 5.2225 4.5682
0.759 1.027 Máx. 5.2408 9.4535 -2.1826 -4.3934 2.3190 1.259 1.777 Máx. -0.3778 0.4174 -3.9108 -2.7302 2.5158
Mín. 1.1337 -4.0350 -13.7265 -12.6468 -0.5676 Mín. -7.4411 -6.5756 -15.3540 -9.2922 -2.9284
Dif. 4.1071 13.4885 11.5438 8.2533 2.8866 Dif. 7.0633 6.9930 11.4432 6.5620 5.4442
0.759 1.277 Máx. 4.0767 7.2519 -2.3793 -7.2442 0.9914 1.259 2.027 Máx. 1.2131 -1.6881 -4.5667 -1.1629 2.9848
Mín. 1.4468 -7.2461 -13.0637 -11.9283 -0.9849 Mín. -8.2497 -5.7858 -17.1509 -7.1712 -3.6129
Dif. 2.6298 14.4981 10.6844 4.6841 1.9763 Dif. 9.4628 4.0977 12.5842 6.0083 6.5976
0.759 1.527 Máx. 5.2377 4.0397 -2.1828 -4.3945 0.5731 1.259 2.277 Máx. 3.7989 -2.1153 -5.4751 -0.3547 3.2986
Mín. 1.1314 -9.4471 -13.7267 -12.6482 -2.3116 Mín. -9.2332 -5.2091 -19.2144 -3.8275 -4.1227
Dif. 4.1063 13.4868 11.5439 8.2537 2.8847 Dif. 13.0321 3.0938 13.7394 3.4728 7.4212
0.759 1.777 Máx. 7.5257 -0.4333 -1.8663 -1.0965 0.9363 1.259 2.504 Máx. 3.7989 -1.2373 -5.4751 0.0090 3.0309
Mín. 1.4111 -9.5940 -15.3275 -13.0301 -4.1318 Mín. -9.2332 -5.7226 -19.2144 -0.5852 -3.8707
Dif. 6.1146 9.1607 13.4612 11.9336 5.0682 Dif. 13.0321 4.4852 13.7394 0.5942 6.9016
0.759 2.027 Máx. 9.1220 -2.5288 -1.3808 1.3736 2.1742 1.509 0.050 Máx. -1.2621 4.4974 -5.8929 -0.0106 1.7184
Mín. 4.6390 -10.4893 -17.5343 -11.2955 -6.3010 Mín. -18.2254 1.7617 -15.9214 -0.5762 -3.0930
Dif. 4.4830 7.9605 16.1535 12.6690 8.4753 Dif. 16.9633 2.7356 10.0285 0.5656 4.8114
0.759 2.277 Máx. 18.6766 1.0376 -0.7738 1.7211 3.8521 1.509 0.277 Máx. -1.2621 4.7343 -5.8929 -0.5922 1.9174
Mín. 3.5117 -14.7513 -19.6913 -7.1487 -8.3027 Mín. -18.2254 2.3911 -15.9214 -3.4248 -3.4925
Dif. 15.1649 15.7889 18.9175 8.8698 12.1548 Dif. 16.9633 2.3432 10.0285 2.8326 5.4099
0.759 2.504 Máx. 18.6766 3.3867 -0.7738 0.2128 4.1384 1.509 0.527 Máx. -2.5539 6.0372 -4.7298 -1.6027 1.9134
Mín. 3.5117 -16.8181 -19.6913 -0.5354 -8.3495 Mín. -15.6013 1.5790 -13.9080 -6.6879 -3.4493
Dif. 15.1649 20.2047 18.9175 0.7482 12.4879 Dif. 13.0474 4.4582 9.1782 5.0852 5.3627
1.009 0.050 Máx. 11.0804 9.1853 -3.7781 0.0697 6.2588 1.509 0.777 Máx. -3.3237 6.7855 -3.7947 -3.2111 1.9190
Mín. -2.5163 -0.1373 -20.4357 -0.5925 -3.3791 Mín. -13.6946 -0.3017 -12.2688 -8.9385 -3.1168
Dif. 13.5967 9.3226 16.6576 0.6622 9.6378 Dif. 10.3709 7.0872 8.4741 5.7274 5.0359
1.009 0.277 Máx. 11.0804 8.3919 -3.7781 0.2818 6.4668 1.509 1.027 Máx. -3.7924 6.1881 -3.2066 -5.0003 2.0239
Mín. -2.5163 0.9821 -20.4357 -4.9271 -3.4656 Mín. -12.4230 -2.5268 -11.1973 -9.7786 -2.6746
Dif. 13.5967 7.4098 16.6576 5.2089 9.9324 Dif. 8.6306 8.7148 7.9907 4.7783 4.6984
1.009 0.527 Máx. 5.1228 7.1748 -3.3606 -0.2747 5.2850 1.509 1.277 Máx. -4.0005 4.4504 -3.0246 -5.6198 2.2486
Mín. -1.3849 2.0219 -18.3494 -8.6473 -2.6714 Mín. -11.9242 -4.4460 -10.8048 -10.3839 -2.2463
Dif. 6.5077 5.1529 14.9888 8.3726 7.9564 Dif. 7.9237 8.8964 7.7802 4.7641 4.4949
1.009 0.777 Máx. 2.1920 7.3606 -3.1563 -2.0539 3.8131 1.509 1.527 Máx. -3.7922 2.5279 -3.2030 -5.0041 2.6780
Mín. -1.1141 -0.0630 -16.3955 -10.6687 -1.8825 Mín. -12.4227 -6.1865 -11.1925 -9.7836 -2.0213
Dif. 3.3061 7.4236 13.2392 8.6148 5.6957 Dif. 8.6305 8.7144 7.9895 4.7795 4.6994
1.009 1.027 Máx. 0.7014 7.0023 -3.0998 -4.4429 2.5558 1.509 1.777 Máx. -3.3261 0.2949 -3.7874 -3.2172 3.1225
Mín. -1.1378 -3.0083 -14.9793 -10.8602 -1.5262 Mín. -13.6978 -6.7945 -12.2591 -8.9467 -1.9148
Dif. 1.8392 10.0107 11.8796 6.4172 4.0820 Dif. 10.3718 7.0894 8.4717 5.7295 5.0374
1.009 1.277 Máx. 0.2567 5.3610 -3.1651 -6.5264 1.7076 1.509 2.027 Máx. -2.5682 -1.5963 -4.7194 -1.6077 3.4587
Mín. -1.2217 -5.3571 -14.3910 -10.7369 -1.7014 Mín. -15.6205 -6.0603 -13.8942 -6.6946 -1.9065
Dif. 1.4784 10.7181 11.2258 4.2106 3.4090 Dif. 13.0523 4.4639 9.1748 5.0869 5.3651
1.009 1.527 Máx. 0.6975 3.0110 -3.0990 -4.4442 1.5318 1.509 2.277 Máx. -1.3109 -2.4017 -5.8832 -0.5921 3.5037
Mín. -1.1417 -6.9987 -14.9784 -10.8619 -2.5483 Mín. -18.2905 -4.7485 -15.9084 -3.4247 -1.9091
Dif. 1.8392 10.0097 11.8793 6.4177 4.0801 Dif. 16.9797 2.3468 10.0253 2.8326 5.4128
1.009 1.777 Máx. 2.1830 0.0645 -3.1554 -2.0558 1.8886 1.509 2.504 Máx. -1.3109 -1.7606 -5.8832 -0.0108 3.1029
Mín. -1.1208 -7.3586 -16.3944 -10.6713 -3.8049 Mín. -18.2905 -4.4959 -15.9084 -0.5764 -1.7110
Dif. 3.3039 7.4231 13.2390 8.6155 5.6936 Dif. 16.9797 2.7352 10.0253 0.5657 4.8139
1.009 2.027 Máx. 5.1071 -2.0210 -3.3606 -0.2762 2.6780 1.759 0.050 Máx. -5.4376 5.2317 -3.9038 0.0076 0.0453
Mín. -1.3966 -7.1736 -18.3495 -8.6493 -5.2761 Mín. -26.3946 1.2722 -11.4768 -0.5706 -3.7329
Dif. 6.5037 5.1526 14.9889 8.3731 7.9541 Dif. 20.9570 3.9595 7.5730 0.5782 3.7782
1.009 2.277 Máx. 11.0560 -0.9811 -3.7800 0.2813 3.4721 1.759 0.277 Máx. -5.4376 6.4220 -3.9038 -0.5106 -0.0358
Mín. -2.5344 -8.3905 -20.4383 -4.9278 -6.4580 Mín. -26.3946 1.8999 -11.4768 -3.5508 -4.0187
Dif. 13.5905 7.4094 16.6583 5.2091 9.9301 Dif. 20.9570 4.5221 7.5730 3.0402 3.9829
1.009 2.504 Máx. 11.0560 0.1384 -3.7800 0.0694 3.3848 1.759 0.527 Máx. -5.2552 7.5217 -3.5971 -1.7441 0.2406
Mín. -2.5344 -9.1837 -20.4383 -0.5929 -6.2511 Mín. -20.8334 2.5177 -8.6567 -7.1366 -3.9705
Dif. 13.5905 9.3221 16.6583 0.6623 9.6359 Dif. 15.5783 5.0040 5.0596 5.3925 4.2111
1.259 0.050 Máx. 3.8266 5.7231 -5.4775 0.0092 3.8797 1.759 0.777 Máx. -5.1693 8.2530 -2.5382 -3.5899 0.8598
Mín. -9.1964 1.2377 -19.2176 -0.5849 -3.0242 Mín. -17.2838 0.1916 -7.3055 -9.6148 -3.6534
Dif. 13.0229 4.4854 13.7401 0.5941 6.9039 Dif. 12.1145 8.0614 4.7673 6.0249 4.5133
1.259 0.277 Máx. 3.8266 5.2059 -5.4775 -0.3542 4.1329 1.759 1.027 Máx. -5.1221 7.2870 -1.8390 -5.3541 1.5357
Mín. -9.1964 2.1129 -19.2176 -3.8269 -3.2909 Mín. -15.1384 -2.5698 -6.4821 -10.7492 -3.0239
MOD-A4-E_Is.00
Dif. 13.0229 3.0930 13.7401 3.4726 7.4238 Dif. 10.0163 9.8569 4.6431 5.3950 4.5596
1.259 0.527 Máx. 1.2287 5.7793 -4.5708 -1.1604 3.6227 1.759 1.277 Máx. -5.1496 4.9709 -1.6016 -5.7330 2.1959
Mín. -8.2289 1.6831 -17.1563 -7.1679 -2.9775 Mín. -14.3614 -4.9620 -6.1967 -11.3902 -2.1972
Dif. 9.4576 4.0961 12.5855 6.0075 6.6002 Dif. 9.2118 9.9329 4.5952 5.6572 4.3931
1.259 0.777 Máx. -0.3709 6.5723 -3.9146 -2.7269 2.9363 1.759 1.527 Máx. -5.1180 2.5747 -1.8350 -5.3594 3.0230
Mín. -7.4319 -0.4199 -15.3591 -9.2877 -2.5099 Mín. -15.1330 -7.2805 -6.4767 -10.7561 -1.5364
Dif. 7.0610 6.9922 11.4444 6.5609 5.4462 Dif. 10.0150 9.8552 4.6417 5.3968 4.5594
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
1.759 1.777 Máx. -5.1607 -0.1978 -2.5291 -3.5997 3.6543 2.259 2.504 Máx. -9.9514 -0.9690 5.5450 0.8464 6.3345
Mín. -17.2724 -8.2614 -7.2934 -9.6279 -0.8592 Mín. -36.5042 -17.9136 -1.9672 0.0143 0.2441
Dif. 12.1117 8.0635 4.7643 6.0282 4.5135 Dif. 26.5528 16.9446 7.5123 0.8320 6.0904
1.759 2.027 Máx. -5.2429 -2.5581 -3.5807 -1.7556 3.9750 2.509 0.050 Máx. -16.7262 32.2863 14.7712 2.1437 1.6578
Mín. -20.8172 -7.5755 -8.6349 -7.1519 -0.2373 Mín. -42.3052 -2.9096 0.3049 0.2394 -5.5675
Dif. 15.5743 5.0175 5.0542 5.3963 4.2123 Dif. 25.5791 35.1959 14.4663 1.9043 7.2253
1.759 2.277 Máx. -5.4300 -1.9322 -3.8762 -0.5092 4.0294 2.509 0.277 Máx. -16.7262 29.2532 14.7712 3.2825 0.0906
Mín. -26.3846 -6.4651 -11.4400 -3.5490 0.0438 Mín. -42.3052 4.6388 0.3049 -9.6178 -5.5544
Dif. 20.9546 4.5329 7.5638 3.0398 3.9856 Dif. 25.5791 24.6145 14.4663 12.9003 5.6451
1.759 2.504 Máx. -5.4300 -1.2708 -3.8762 0.0078 3.7463 2.509 0.527 Máx. -7.4351 26.2105 11.1455 0.3858 -1.5746
Mín. -26.3846 -5.2298 -11.4400 -0.5703 -0.0353 Mín. -27.6271 8.7287 2.1045 -14.1196 -4.4715
Dif. 20.9546 3.9590 7.5638 0.5781 3.7815 Dif. 20.1920 17.4818 9.0410 14.5054 2.8968
2.009 0.050 Máx. -7.3504 9.4778 -0.3033 0.4161 -0.8577 2.509 0.777 Máx. -4.2980 22.5770 8.9028 -4.2542 -0.8083
Mín. -31.5588 1.5949 -6.1598 -0.1696 -4.9064 Mín. -16.8584 2.9602 3.2853 -16.3746 -3.8178
Dif. 24.2084 7.8829 5.8565 0.5857 4.0486 Dif. 12.5604 19.6168 5.6175 12.1203 3.0095
2.009 0.277 Máx. -7.3504 11.2340 -0.3033 -0.0825 -1.0437 2.509 1.027 Máx. -3.8496 16.6957 7.5355 -8.1758 0.4270
Mín. -31.5588 2.6082 -6.1598 -4.4183 -5.1409 Mín. -10.2182 -3.6049 3.8203 -16.7309 -2.8416
Dif. 24.2084 8.6258 5.8565 4.3359 4.0972 Dif. 6.3686 20.3006 3.7153 8.5551 3.2686
2.009 0.527 Máx. -6.0496 12.0149 -0.5972 -1.5378 -1.1141 2.509 1.277 Máx. -3.1768 9.3564 7.2817 -9.1407 1.5014
Mín. -22.3874 3.5540 -3.7374 -8.7001 -4.4430 Mín. -8.7577 -9.3305 4.0064 -17.2817 -1.5094
Dif. 16.3378 8.4609 3.1402 7.1623 3.3289 Dif. 5.5809 18.6869 3.2753 8.1410 3.0107
2.009 0.777 Máx. -5.1177 11.0110 -0.4727 -3.8023 -0.0917 2.509 1.527 Máx. -3.8465 3.6279 7.5369 -8.1821 2.8331
Mín. -16.9304 1.1577 -2.2746 -11.3641 -4.0235 Mín. -10.2141 -16.6651 3.8213 -16.7393 -0.4334
Dif. 11.8127 9.8534 1.8018 7.5619 3.9318 Dif. 6.3676 20.2930 3.7156 8.5572 3.2666
2.009 1.027 Máx. -4.4189 9.3575 -0.0917 -5.8714 1.0445 2.509 1.777 Máx. -4.2929 -2.9326 8.9044 -4.2667 3.8110
Mín. -13.8518 -2.7205 -1.5385 -12.5791 -3.2216 Mín. -16.8516 -22.5402 3.2864 -16.3912 0.8031
Dif. 9.4329 12.0780 1.4468 6.7077 4.2661 Dif. 12.5587 19.6076 5.6179 12.1245 3.0079
2.009 1.277 Máx. -4.1854 6.0210 0.1267 -6.3456 2.0510 2.509 2.027 Máx. -7.4297 -8.6863 11.1450 0.3659 4.4666
Mín. -12.8114 -6.0065 -1.2885 -13.2563 -2.0556 Mín. -27.6200 -26.1541 2.1042 -14.1461 1.5709
Dif. 8.6260 12.0275 1.4152 6.9107 4.1066 Dif. 20.1903 17.4677 9.0409 14.5120 2.8957
2.009 1.527 Máx. -4.4123 2.7317 -0.0886 -5.8771 3.2166 2.509 2.277 Máx. -16.7166 -4.7154 14.7684 3.2482 5.5496
Mín. -13.8430 -9.3426 -1.5344 -12.5866 -1.0483 Mín. -42.2927 -29.3554 0.3028 -9.6635 -0.0943
Dif. 9.4307 12.0743 1.4458 6.7095 4.2649 Dif. 25.5760 24.6400 14.4656 12.9117 5.6439
2.009 1.777 Máx. -5.1003 -1.1510 -0.4662 -3.8131 4.0192 2.509 2.504 Máx. -16.7166 2.7030 14.7684 2.1931 5.5618
Mín. -16.9073 -11.0022 -2.2658 -11.3786 0.0884 Mín. -42.2927 -32.5617 0.3028 0.2764 -1.6621
Dif. 11.8070 9.8512 1.7996 7.5655 3.9308 Dif. 25.5760 35.2647 14.4656 1.9166 7.2239
2.009 2.027 Máx. -6.0104 -3.5562 -0.5865 -1.5528 4.4411 2.759 0.050 Máx. -7.8643 54.5825 20.7616 15.2532 10.7644
Mín. -22.3352 -12.0178 -3.7231 -8.7200 1.1127 Mín. -63.8243 4.6601 4.1014 0.2295 -2.6920
Dif. 16.3248 8.4616 3.1366 7.1672 3.3285 Dif. 55.9601 49.9224 16.6602 15.0236 13.4564
2.009 2.277 Máx. -7.2710 -2.6711 -0.2881 -0.0994 5.1480 2.759 0.277 Máx. -7.8643 49.8331 20.7616 9.8850 4.1685
Mín. -31.4531 -11.3179 -6.1395 -4.4409 1.0490 Mín. -63.8243 11.8088 4.1014 -12.5349 -3.7138
Dif. 24.1821 8.6468 5.8514 4.3415 4.0990 Dif. 55.9601 38.0243 16.6602 22.4199 7.8823
2.009 2.504 Máx. -7.2710 -1.7129 -0.2881 0.4460 4.9198 2.759 0.527 Máx. -2.3917 43.1653 15.8762 1.7555 0.8900
Mín. -31.4531 -9.6352 -6.1395 -0.1472 0.8677 Mín. -28.9926 11.3909 6.3603 -16.2993 -4.6493
Dif. 24.1821 7.9223 5.8514 0.5932 4.0520 Dif. 26.6009 31.7744 9.5160 18.0549 5.5393
2.259 0.050 Máx. -10.0063 17.6376 5.5410 0.7963 -0.2410 2.759 0.777 Máx. -1.6059 32.2923 12.6473 -5.0458 0.2869
Mín. -36.5772 0.7620 -1.9703 -0.0232 -6.3303 Mín. -12.8676 2.8252 6.1423 -18.2279 -3.3451
Dif. 26.5710 16.8756 7.5112 0.8195 6.0893 Dif. 11.2617 29.4672 6.5051 13.1821 3.6320
2.259 0.277 Máx. -10.0063 18.4103 5.5410 0.7944 -0.9388 2.759 1.027 Máx. -1.7909 20.6956 10.7233 -9.3702 0.2688
Mín. -36.5772 3.3710 -1.9703 -6.4266 -6.1567 Mín. -6.3577 -4.0978 5.9803 -18.4307 -1.8280
Dif. 26.5710 15.0392 7.5112 7.2210 5.2179 Dif. 4.5668 24.7934 4.7430 9.0606 2.0968
2.259 0.527 Máx. -8.0092 18.1140 4.6062 -0.8910 -2.0439 2.759 1.277 Máx. -1.3979 10.7320 10.1871 -11.0296 0.9316
Mín. -23.2430 5.1830 -0.5795 -11.1505 -4.4606 Mín. -5.1278 -10.7015 6.0398 -19.1578 -0.9409
Dif. 15.2337 12.9310 5.1857 10.2595 2.4167 Dif. 3.7299 21.4336 4.1473 8.1282 1.8725
2.259 0.777 Máx. -5.8345 15.4767 3.9196 -3.9750 -0.7036 2.759 1.527 Máx. -1.7895 4.1234 10.7261 -9.3781 1.8184
Mín. -15.8505 2.2772 0.7075 -13.7924 -4.1429 Mín. -6.3559 -20.6616 5.9821 -18.4413 -0.2760
Dif. 10.0160 13.1994 3.2121 9.8174 3.4392 Dif. 4.5663 24.7849 4.7440 9.0632 2.0944
2.259 1.027 Máx. -4.1474 12.5364 3.4446 -6.8909 0.6648 2.759 1.777 Máx. -1.6066 -2.8010 12.6517 -5.0611 3.3381
Mín. -11.9882 -3.0578 1.5330 -14.6496 -3.2186 Mín. -12.8686 -32.2602 6.1455 -18.2482 -0.2922
Dif. 7.8408 15.5942 1.9116 7.7587 3.8834 Dif. 11.2620 29.4592 6.5062 13.1871 3.6303
2.259 1.277 Máx. -3.5388 7.5697 3.3868 -7.4959 1.8409 2.759 2.027 Máx. -2.4037 -11.3653 15.8809 1.7345 4.6458
Mín. -10.7774 -7.5492 1.8511 -15.3467 -1.8477 Mín. -29.0087 -43.1313 6.3638 -16.3273 -0.8927
Dif. 7.2386 15.1189 1.5356 7.8508 3.6886 Dif. 26.6050 31.7660 9.5172 18.0618 5.5385
2.259 1.527 Máx. -4.1415 3.0760 3.4467 -6.8965 3.2112 2.759 2.277 Máx. -7.9019 -11.8605 20.7609 9.8596 3.7114
Mín. -11.9804 -12.5122 1.5346 -14.6571 -0.6705 Mín. -63.8747 -49.9021 4.1008 -12.5688 -4.1717
Dif. 7.8388 15.5882 1.9121 7.7606 3.8816 Dif. 55.9728 38.0416 16.6601 22.4284 7.8831
2.259 1.777 Máx. -5.8198 -2.2556 3.9230 -3.9862 4.1362 2.759 2.504 Máx. -7.9019 -4.7913 20.7609 15.2836 2.6895
Mín. -15.8309 -15.4478 0.7101 -13.8073 0.6986 Mín. -63.8747 -54.7575 4.1008 0.2524 -10.7677
MOD-A4-E_Is.00
Dif. 10.0111 13.1922 3.2129 9.8211 3.4376 Dif. 55.9728 49.9662 16.6601 15.0313 13.4572
2.259 2.027 Máx. -7.9787 -5.1485 4.6097 -0.9091 4.4558 3.009 0.200 Máx. 6.3946 265.9888 29.2461 80.0785 12.4971
Mín. -23.2023 -18.0680 -0.5769 -11.1746 2.0402 Mín. -5.6072 21.3002 9.2956 -8.3908 -12.0342
Dif. 15.2236 12.9195 5.1866 10.2655 2.4156 Dif. 12.0018 244.6886 19.9505 88.4693 24.5313
2.259 2.277 Máx. -9.9514 -3.4523 5.5450 0.7620 6.1573 3.009 0.277 Máx. 6.3946 186.2701 29.2461 24.4811 6.7739
Mín. -36.5042 -18.5186 -1.9672 -6.4699 0.9392 Mín. -5.6072 17.7365 9.2956 -11.7336 -6.5958
Dif. 26.5528 15.0663 7.5123 7.2318 5.2181 Dif. 12.0018 168.5336 19.9505 36.2147 13.3697
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
3.009 0.527 Máx. 4.5142 78.3257 20.5105 0.8546 3.5401 3.509 1.277 Máx. 9.4613 9.3688 6.9248 -9.2176 1.4976
Mín. -3.7495 10.3486 7.9474 -16.4092 -3.5209 Mín. 3.7045 -9.3212 3.7770 -17.3841 -1.5144
Dif. 8.2637 67.9771 12.5631 17.2638 7.0610 Dif. 5.7568 18.6900 3.1478 8.1666 3.0120
3.009 0.777 Máx. 1.4413 39.2042 14.8224 -6.2759 1.9336 3.509 1.527 Máx. 10.8865 3.5749 7.2216 -8.2464 0.4654
Mín. -0.7398 2.8899 6.9011 -18.7450 -1.9661 Mín. 4.3508 -16.7358 3.5848 -16.8251 -2.7905
Dif. 2.1811 36.3143 7.9213 12.4690 3.8996 Dif. 6.5356 20.3106 3.6368 8.5786 3.2559
3.009 1.027 Máx. 1.1877 22.1761 11.9078 -10.1120 0.9298 3.509 1.777 Máx. 17.4056 -2.9977 8.5517 -4.2892 -0.7307
Mín. -0.4977 -4.1448 6.6312 -19.1294 -0.9632 Mín. 4.7084 -22.6270 3.0219 -16.4212 -3.7144
Dif. 1.6854 26.3209 5.2766 9.0174 1.8930 Dif. 12.6972 19.6293 5.5298 12.1320 2.9837
3.009 1.277 Máx. 1.5398 11.0968 11.2039 -12.5953 0.1685 3.509 2.027 Máx. 27.9034 -8.6448 10.7061 0.4034 -1.4624
Mín. -0.8456 -11.0612 7.2025 -19.9358 -0.1800 Mín. 7.6423 -26.0987 1.7749 -14.0961 -4.3219
Dif. 2.3854 22.1580 4.0014 7.3405 0.3485 Dif. 20.2611 17.4539 8.9311 14.4995 2.8595
3.009 1.527 Máx. 1.1909 4.1736 11.9122 -10.1220 0.9510 3.509 2.277 Máx. 41.8871 -4.4288 14.1698 3.3307 0.2322
Mín. -0.4953 -22.1378 6.6341 -19.1427 -0.9389 Mín. 16.4125 -28.9733 -0.1462 -9.5536 -5.3657
Dif. 1.6862 26.3114 5.2781 9.0207 1.8900 Dif. 25.4746 24.5445 14.3160 12.8843 5.5979
3.009 1.777 Máx. 1.4455 -2.8688 14.8308 -6.2954 1.9565 3.509 2.504 Máx. 41.8871 3.1421 14.1698 2.1602 1.7958
Mín. -0.7366 -39.1762 6.9073 -18.7710 -1.9407 Mín. 16.4125 -31.9764 -0.1462 0.2518 -5.3835
Dif. 2.1821 36.3074 7.9235 12.4755 3.8973 Dif. 25.4746 35.1185 14.3160 1.9084 7.1793
3.009 2.027 Máx. 4.5160 -10.3532 20.5254 0.8277 3.5171 3.759 0.050 Máx. 35.5071 17.6440 5.1277 0.8040 6.0752
Mín. -3.7482 -78.3320 7.9585 -16.4451 -3.5452 Mín. 9.2037 0.7668 -2.2802 -0.0174 0.0496
Dif. 8.2641 67.9788 12.5669 17.2728 7.0623 Dif. 26.3034 16.8772 7.4079 0.8214 6.0256
3.009 2.277 Máx. 6.3922 -17.8260 29.2714 24.4510 6.5969 3.759 0.277 Máx. 35.5071 18.5425 5.1277 0.8107 5.9013
Mín. -5.6089 -186.3900 9.3145 -11.7562 -6.7723 Mín. 9.2037 3.4703 -2.2802 -6.4049 0.7472
Dif. 12.0011 168.5640 19.9569 36.2072 13.3692 Dif. 26.3034 15.0722 7.4079 7.2156 5.1541
3.009 2.354 Máx. 6.3922 -21.4549 29.2714 80.0905 12.0412 3.759 0.527 Máx. 23.0806 18.4094 4.1991 -0.9096 4.2497
Mín. -5.6089 -266.1958 9.3145 -8.3820 -12.4876 Mín. 7.8875 5.4046 -0.8849 -11.1753 1.8857
Dif. 12.0011 244.7409 19.9569 88.4725 24.5288 Dif. 15.1931 13.0048 5.0839 10.2657 2.3640
3.259 0.050 Máx. 64.2017 53.3215 20.2177 15.1119 2.8650 3.759 0.777 Máx. 16.1618 15.7698 3.5162 -4.0534 3.9975
Mín. 8.1472 3.7145 3.6935 0.1237 -10.5336 Mín. 6.0680 2.4972 0.4050 -13.8968 0.5946
Dif. 56.0544 49.6070 16.5242 14.9883 13.3986 Dif. 10.0938 13.2727 3.1112 9.8435 3.4029
3.259 0.277 Máx. 64.2017 49.0437 20.2177 10.0274 3.7466 3.759 1.027 Máx. 12.5242 12.7153 3.0371 -7.0139 3.1400
Mín. 8.1472 11.2169 3.6935 -12.3450 -4.1247 Mín. 4.5494 -2.9236 1.2274 -14.8135 -0.7238
Dif. 56.0544 37.8269 16.5242 22.3724 7.8714 Dif. 7.9748 15.6389 1.8097 7.7997 3.8638
3.259 0.527 Máx. 29.6672 43.0009 15.5597 1.8313 4.6031 3.759 1.277 Máx. 11.3839 7.5893 2.9078 -7.6366 1.8359
Mín. 2.8975 11.2677 6.1229 -16.1982 -0.9247 Mín. 3.9937 -7.5345 1.5432 -15.5344 -1.8544
Dif. 26.7696 31.7333 9.4368 18.0296 5.5278 Dif. 7.3902 15.1238 1.3645 7.8978 3.6903
3.259 0.777 Máx. 13.5918 32.3129 12.4295 -5.0280 3.2791 3.759 1.527 Máx. 12.5336 2.9699 3.0387 -7.0266 0.7081
Mín. 2.1490 2.8406 5.9789 -18.2041 -0.3365 Mín. 4.5565 -12.6537 1.2286 -14.8305 -3.1609
Dif. 11.4428 29.4723 6.4506 13.1761 3.6155 Dif. 7.9771 15.6236 1.8101 7.8039 3.8690
3.259 1.027 Máx. 7.1121 20.7361 10.5165 -9.3876 1.7791 3.759 1.777 Máx. 16.1810 -2.4529 3.5200 -4.0790 -0.6097
Mín. 2.3567 -4.0674 5.8474 -18.4539 -0.3055 Mín. 6.0824 -15.7110 0.4079 -13.9310 -4.0177
Dif. 4.7554 24.8035 4.6691 9.0664 2.0846 Dif. 10.0987 13.2580 3.1122 9.8520 3.4079
3.259 1.277 Máx. 5.8981 10.7380 9.9934 -11.0596 0.9295 3.759 2.027 Máx. 23.1099 -5.3635 4.2066 -0.9483 -1.8993
Mín. 1.9756 -10.6970 5.9153 -19.1978 -0.9437 Mín. 7.9094 -18.3546 -0.8792 -11.2270 -4.2679
Dif. 3.9225 21.4350 4.0781 8.1382 1.8732 Dif. 15.2005 12.9912 5.0858 10.2786 2.3686
3.259 1.527 Máx. 7.1183 4.1006 10.5213 -9.3989 0.2937 3.759 2.277 Máx. 35.5481 -3.5823 5.1415 0.7582 -0.7582
Mín. 2.3613 -20.6919 5.8505 -18.4690 -1.7948 Mín. 9.2343 -18.6919 -2.2699 -6.4749 -5.9160
Dif. 4.7569 24.7925 4.6709 9.0701 2.0885 Dif. 26.3138 15.1096 7.4114 7.2331 5.1578
3.259 1.777 Máx. 13.6059 -2.8136 12.4385 -5.0499 0.3262 3.759 2.504 Máx. 35.5481 -1.0301 5.1415 0.8542 -0.0582
Mín. 2.1596 -32.2770 5.9856 -18.2333 -3.2928 Mín. 9.2343 -17.9952 -2.2699 0.0202 -6.0867
Dif. 11.4463 29.4634 6.4529 13.1834 3.6189 Dif. 26.3138 16.9650 7.4114 0.8340 6.0285
3.259 2.027 Máx. 29.6971 -11.2504 15.5742 1.8008 0.9174 4.009 0.050 Máx. 28.2307 10.2534 -0.3814 0.5469 4.8021
Mín. 2.9200 -42.9781 6.1337 -16.2389 -4.6129 Mín. 4.8543 2.1766 -6.2639 -0.0715 0.7795
Dif. 26.7771 31.7277 9.4405 18.0397 5.5302 Dif. 23.3764 8.0768 5.8825 0.6184 4.0226
3.259 2.277 Máx. 64.2721 -11.3032 20.2366 9.9909 4.1246 4.009 0.277 Máx. 28.2307 12.1486 -0.3814 -0.1031 5.0060
Mín. 8.2000 -49.1590 3.7076 -12.3936 -3.7467 Mín. 4.8543 3.2942 -6.2639 -4.4458 0.9425
Dif. 56.0722 37.8558 16.5290 22.3846 7.8714 Dif. 23.3764 8.8544 5.8825 4.3428 4.0635
3.259 2.504 Máx. 64.2721 -3.8989 20.2366 15.1479 10.5442 4.009 0.527 Máx. 20.1500 12.9082 -0.8047 -1.6247 4.2943
Mín. 8.2000 -53.5675 3.7076 0.1506 -2.8571 Mín. 4.3716 4.2240 -4.0140 -8.8159 1.0026
Dif. 56.0722 49.6687 16.5290 14.9973 13.4013 Dif. 15.7784 8.6842 3.2094 7.1912 3.2917
3.509 0.050 Máx. 41.8373 31.6409 14.1530 2.1103 5.3811 4.009 0.777 Máx. 15.2389 11.5888 -0.7706 -3.9530 3.9175
Mín. 16.3753 -3.3936 -0.1587 0.2144 -1.7976 Mín. 3.8491 1.5910 -2.6718 -11.5651 0.0122
Dif. 25.4620 35.0345 14.3117 1.8959 7.1787 Dif. 11.3898 9.9978 1.9012 7.6121 3.9053
3.509 0.277 Máx. 41.8373 28.8282 14.1530 3.3789 5.3581 4.009 1.027 Máx. 12.4005 9.6451 -0.4437 -6.0589 3.1638
Mín. 16.3753 4.3201 -0.1587 -9.4893 -0.2379 Mín. 3.3304 -2.5048 -2.0078 -12.8291 -1.0878
Dif. 25.4620 24.5081 14.3117 12.8682 5.5960 Dif. 9.0701 12.1499 1.5641 6.7702 4.2517
3.509 0.527 Máx. 27.8714 26.1444 10.6948 0.4387 4.3078 4.009 1.277 Máx. 11.4316 6.0477 -0.2443 -6.5468 2.0449
Mín. 7.6184 8.6792 1.7666 -14.0491 1.4518 Mín. 3.1506 -5.9865 -1.7833 -13.5246 -2.0638
MOD-A4-E_Is.00
Dif. 20.2530 17.4653 8.9283 14.4878 2.8560 Dif. 8.2810 12.0342 1.5389 6.9777 4.1087
3.509 0.777 Máx. 17.3869 22.6755 8.5447 -4.2653 3.6971 4.009 1.527 Máx. 12.4094 2.5570 -0.4442 -6.0718 1.0716
Mín. 4.6944 3.0341 3.0167 -16.3893 0.7177 Mín. 3.3371 -9.5756 -2.0085 -12.8462 -3.1856
Dif. 12.6925 19.6413 5.5280 12.1240 2.9794 Dif. 9.0723 12.1326 1.5643 6.7744 4.2571
3.509 1.027 Máx. 10.8779 16.7884 7.2183 -8.2343 2.7717 4.009 1.777 Máx. 15.2579 -1.5403 -0.7708 -3.9792 -0.0287
Mín. 4.3444 -3.5353 3.5824 -16.8088 -0.4795 Mín. 3.8633 -11.5212 -2.6720 -11.6000 -3.9396
Dif. 6.5335 20.3237 3.6359 8.5746 3.2512 Dif. 11.3946 9.9809 1.9011 7.6208 3.9108
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
4.009 2.027 Máx. 20.1806 -4.1778 -0.8029 -1.6648 -1.0189 4.759 0.050 Máx. 9.3481 5.4423 -3.2121 0.3987 3.2887
Mín. 4.3945 -12.8466 -4.0117 -8.8694 -4.3161 Mín. -3.7128 1.0272 -16.1971 -0.1355 -3.5270
Dif. 15.7861 8.6688 3.2088 7.2046 3.2972 Dif. 13.0608 4.4152 12.9850 0.5342 6.8157
4.009 2.277 Máx. 28.2778 -3.4051 -0.3756 -0.1571 -0.9577 4.759 0.277 Máx. 9.3481 5.9013 -3.2121 0.0614 3.5782
Mín. 4.8896 -12.2965 -6.2561 -4.5178 -5.0263 Mín. -3.7128 2.6345 -16.1971 -3.2726 -3.7498
Dif. 23.3882 8.8914 5.8805 4.3608 4.0686 Dif. 13.0608 3.2668 12.9850 3.3341 7.3280
4.009 2.504 Máx. 28.2778 -2.4415 -0.3756 0.5967 -0.7925 4.759 0.527 Máx. 6.9247 7.0604 -2.3646 -1.0512 3.2263
Mín. 4.8896 -10.6067 -6.2561 -0.0342 -4.8195 Mín. -2.2069 2.6440 -14.2148 -7.0222 -3.2909
Dif. 23.3882 8.1651 5.8805 0.6309 4.0270 Dif. 9.1316 4.4164 11.8501 5.9711 6.5172
4.259 0.050 Máx. 21.0291 6.6491 -3.0559 0.4622 3.8970 4.759 0.777 Máx. 5.4222 7.2457 -1.7612 -2.7512 2.6722
Mín. 1.4135 2.3353 -10.3463 -0.0755 0.0778 Mín. -1.1364 0.0852 -12.4879 -9.3202 -2.7199
Dif. 19.6156 4.3138 7.2904 0.5377 3.8192 Dif. 6.5586 7.1605 10.7266 6.5690 5.3921
4.259 0.277 Máx. 21.0291 8.2881 -3.0559 -0.3759 4.1331 4.759 1.027 Máx. 4.5515 6.4453 -1.4290 -4.7285 2.2549
Mín. 1.4135 3.2995 -10.3463 -3.3712 0.1216 Mín. -0.4592 -2.4734 -11.2851 -9.9785 -2.2893
Dif. 19.6156 4.9886 7.2904 2.9953 4.0115 Dif. 5.0107 8.9187 9.8562 5.2500 4.5442
4.259 0.527 Máx. 15.8525 9.2530 -3.0319 -1.8500 3.9977 4.759 1.277 Máx. 4.2378 4.5819 -1.3732 -6.0303 2.1111
Mín. 1.5195 3.8162 -7.9032 -7.2777 -0.2202 Mín. -0.1981 -4.5200 -10.8087 -10.3396 -2.1204
Dif. 14.3330 5.4368 4.8712 5.4278 4.2179 Dif. 4.4360 9.1019 9.4354 4.3094 4.2315
4.259 0.777 Máx. 12.5549 9.1073 -2.1477 -3.7763 3.6563 4.759 1.527 Máx. 4.5472 2.5283 -1.4347 -4.7372 2.2780
Mín. 1.6226 0.8323 -6.7848 -9.8633 -0.8577 Mín. -0.4625 -6.3721 -11.2927 -9.9900 -2.2633
Dif. 10.9323 8.2750 4.6371 6.0870 4.5140 Dif. 5.0096 8.9004 9.8581 5.2529 4.5413
4.259 1.027 Máx. 10.5221 7.6617 -1.5431 -5.5709 3.0187 4.759 1.777 Máx. 5.4139 -0.0216 -1.7736 -2.7688 2.7064
Mín. 1.6599 -2.2888 -6.0875 -11.0382 -1.5396 Mín. -1.1426 -7.1610 -12.5043 -9.3436 -2.6823
Dif. 8.8622 9.9505 4.5444 5.4673 4.5583 Dif. 6.5565 7.1394 10.7307 6.5748 5.3887
4.259 1.277 Máx. 9.7787 5.0031 -1.3375 -5.9599 2.1890 4.759 2.027 Máx. 6.9162 -2.5512 -2.3859 -1.0797 3.2729
Mín. 1.7126 -4.9378 -5.8446 -11.6927 -2.2064 Mín. -2.2132 -6.9366 -14.2432 -7.0603 -3.2397
Dif. 8.0661 9.9410 4.5071 5.7328 4.3954 Dif. 9.1294 4.3855 11.8572 5.9806 6.5126
4.259 1.527 Máx. 10.5290 2.3453 -1.5457 -5.5830 1.5241 4.759 2.277 Máx. 9.3585 -2.6854 -3.2462 0.0092 3.7248
Mín. 1.6650 -7.5864 -6.0910 -11.0543 -3.0393 Mín. -3.7050 -5.9692 -16.2426 -3.3423 -3.5969
Dif. 8.8639 9.9317 4.5453 5.4713 4.5635 Dif. 13.0634 3.2838 12.9964 3.3515 7.3217
4.259 1.777 Máx. 12.5718 -0.7752 -2.1522 -3.8014 0.8411 4.759 2.504 Máx. 9.3585 -1.2444 -3.2462 0.4329 3.5002
Mín. 1.6353 -9.0312 -6.7908 -9.8968 -3.6785 Mín. -3.7050 -5.7320 -16.2426 -0.1098 -3.3088
Dif. 10.9365 8.2560 4.6386 6.0954 4.5196 Dif. 13.0634 4.4876 12.9964 0.5428 6.8090
4.259 2.027 Máx. 15.8863 -3.7621 -3.0363 -1.8895 0.2021 5.009 0.050 Máx. 5.6389 7.6167 -2.0078 0.0594 3.5411
Mín. 1.5448 -9.1809 -7.9090 -7.3305 -4.0218 Mín. -6.9168 -1.3136 -18.0754 -0.6062 -6.0427
Dif. 14.3415 5.4188 4.8727 5.4409 4.2239 Dif. 12.5557 8.9304 16.0675 0.6657 9.5838
4.259 2.277 Máx. 21.0902 -3.4054 -3.0573 -0.4300 -0.1398 5.009 0.277 Máx. 5.6389 7.5787 -2.0078 0.6180 3.6723
Mín. 1.4593 -8.4293 -10.3480 -3.4434 -4.1574 Mín. -6.9168 0.3723 -18.0754 -4.4789 -6.1912
Dif. 19.6309 5.0240 7.2908 3.0134 4.0176 Dif. 12.5557 7.2064 16.0675 5.0968 9.8634
4.259 2.504 Máx. 21.0902 -2.5982 -3.0573 0.5116 -0.0938 5.009 0.527 Máx. 3.8770 7.2774 -1.4044 -0.0447 2.8862
Mín. 1.4593 -6.9997 -10.3480 -0.0384 -3.9184 Mín. -2.1419 2.0989 -15.7412 -8.3406 -4.9986
Dif. 19.6309 4.4014 7.2908 0.5501 3.8246 Dif. 6.0189 5.1785 14.3368 8.2959 7.8848
4.509 0.050 Máx. 14.2137 5.0168 -4.0997 0.4314 3.4421 5.009 0.777 Máx. 3.2745 7.6017 -1.1107 -1.9469 2.0349
Mín. -1.7467 2.1513 -13.5305 -0.0843 -1.4565 Mín. -0.1452 0.1179 -13.6680 -10.5260 -3.6099
Dif. 15.9603 2.8655 9.4308 0.5157 4.8986 Dif. 3.4198 7.4839 12.5573 8.5791 5.6448
4.509 0.277 Máx. 14.2137 6.1803 -4.0997 -0.2797 3.8193 5.009 1.027 Máx. 3.0813 7.1605 -1.0150 -4.4107 1.6024
Mín. -1.7467 3.4756 -13.5305 -3.0081 -1.6723 Mín. 0.8349 -2.8897 -12.1996 -10.8172 -2.4542
Dif. 15.9603 2.7047 9.4308 2.7284 5.4916 Dif. 2.2463 10.0502 11.1846 6.4065 4.0566
4.509 0.527 Máx. 10.8820 7.8406 -3.1245 -1.6152 3.6746 5.009 1.277 Máx. 3.0614 5.3906 -1.0710 -6.5205 1.7022
Mín. -0.9856 2.9316 -11.7676 -6.7046 -1.7444 Mín. 1.1231 -5.3349 -11.5987 -10.7290 -1.7065
Dif. 11.8676 4.9090 8.6431 5.0894 5.4191 Dif. 1.9384 10.7255 10.5278 4.2085 3.4087
4.509 0.777 Máx. 8.6904 7.6982 -2.3411 -3.3478 3.2508 5.009 1.527 Máx. 3.0718 2.9381 -1.0199 -4.4187 2.4490
Mín. -0.4295 0.3829 -10.3308 -9.1208 -1.8185 Mín. 0.8278 -7.0959 -12.2062 -10.8278 -1.6063
Dif. 9.1199 7.3153 7.9896 5.7730 5.0694 Dif. 2.2440 10.0340 11.1863 6.4091 4.0553
4.509 1.027 Máx. 7.3006 6.5817 -1.8417 -5.1809 2.7337 5.009 1.777 Máx. 3.2511 -0.0666 -1.1212 -1.9627 3.6036
Mín. -0.0494 -2.2315 -9.3773 -10.0194 -1.9795 Mín. -0.1628 -7.5334 -13.6821 -10.5471 -2.0396
Dif. 7.3500 8.8132 7.5357 4.8384 4.7132 Dif. 3.4139 7.4668 12.5609 8.5844 5.6432
4.509 1.277 Máx. 6.7695 4.4854 -1.6905 -5.8132 2.2412 5.009 2.027 Máx. 3.8282 -2.0415 -1.4218 -0.0687 4.9893
Mín. 0.1345 -4.4197 -9.0260 -10.6417 -2.2554 Mín. -2.1907 -7.2009 -15.7644 -8.3726 -2.8931
Dif. 6.6350 8.9051 7.3355 4.8285 4.4966 Dif. 6.0189 5.1594 14.3426 8.3039 7.8824
4.509 1.527 Máx. 7.3028 2.2895 -1.8464 -5.1914 1.9668 5.009 2.277 Máx. 5.5699 -0.3840 -2.0326 0.5850 6.1727
Mín. -0.0477 -6.5044 -9.3836 -10.0333 -2.7508 Mín. -7.0088 -7.5943 -18.1084 -4.5228 -3.6861
Dif. 7.3505 8.7939 7.5373 4.8419 4.7175 Dif. 12.5786 7.2103 16.0758 5.1078 9.8588
4.509 1.777 Máx. 8.6991 -0.3197 -2.3505 -3.3698 1.8038 5.009 2.504 Máx. 5.5699 1.2290 -2.0326 0.0597 6.0192
Mín. -0.4229 -7.6140 -10.3432 -9.1501 -3.2705 Mín. -7.0088 -7.7296 -18.1084 -0.6059 -3.5587
Dif. 9.1221 7.2943 7.9927 5.7803 5.0743 Dif. 12.5786 8.9586 16.0758 0.6656 9.5779
4.509 2.027 Máx. 10.9117 -2.8627 -3.1376 -1.6515 1.7265 5.259 0.050 Máx. 0.0291 15.6182 0.0429 0.1913 4.1888
Mín. -0.9633 -7.7488 -11.7850 -6.7529 -3.6985 Mín. -13.9556 -4.2865 -18.6023 -0.5641 -8.2822
MOD-A4-E_Is.00
Dif. 11.8751 4.8861 8.6475 5.1015 5.4251 Dif. 13.9847 19.9048 18.6452 0.7554 12.4710
4.509 2.277 Máx. 14.3021 -3.5684 -4.1123 -0.3334 1.6525 5.259 0.277 Máx. 0.0291 13.7887 0.0429 1.9587 3.9267
Mín. -1.6804 -6.3040 -13.5472 -3.0797 -3.8457 Mín. -13.9556 -1.7596 -18.6023 -6.8320 -8.2033
Dif. 15.9825 2.7356 9.4349 2.7463 5.4982 Dif. 13.9847 15.5482 18.6452 8.7906 12.1299
4.509 2.504 Máx. 14.3021 -2.4079 -4.1123 0.4797 1.4384 5.259 0.527 Máx. -1.4210 10.0104 -0.3761 1.6244 2.2677
Mín. -1.6804 -5.3590 -13.5472 -0.0481 -3.4663 Mín. -4.8315 2.1696 -16.1947 -10.9609 -6.1765
Dif. 15.9825 2.9510 9.4349 0.5278 4.9047 Dif. 3.4105 7.8408 15.8186 12.5854 8.4441
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
5.259 0.777 Máx. 1.5258 9.4722 -0.7073 -0.9127 1.0104 5.759 0.277 Máx. -0.8442 35.2294 4.3806 12.2100 5.3528
Mín. -3.6099 0.3419 -13.7822 -12.7849 -4.0330 Mín. -44.9425 4.0278 -13.2559 -15.8816 -6.1885
Dif. 5.1357 9.1303 13.0749 11.8722 5.0435 Dif. 44.0984 31.2015 17.6364 28.0916 11.5413
5.259 1.027 Máx. 1.7025 9.4594 -0.9344 -4.2761 0.6109 5.759 0.527 Máx. 3.1914 27.2237 1.1267 8.4578 0.6988
Mín. -1.5330 -4.0305 -12.0622 -12.4903 -2.2612 Mín. -28.5108 7.9159 -9.5832 -18.3853 -5.9212
Dif. 3.2354 13.4899 11.1277 8.2142 2.8721 Dif. 31.7022 19.3078 10.7099 26.8431 6.6199
5.259 1.277 Máx. 1.4371 7.2763 -1.1034 -7.1538 0.9874 5.759 0.777 Máx. 1.4637 26.9520 0.0768 1.1337 -0.0227
Mín. -0.4388 -7.2278 -11.3625 -11.8077 -0.9880 Mín. -16.3294 -1.7878 -6.7351 -18.6940 -5.0050
Dif. 1.8760 14.5041 10.2591 4.6539 1.9755 Dif. 17.7931 28.7398 6.8119 19.8277 4.9823
5.259 1.527 Máx. 1.6920 4.0709 -0.9375 -4.2841 2.2605 5.759 1.027 Máx. -0.3517 21.2095 -0.2847 -5.2298 -0.0643
Mín. -1.5435 -9.4055 -12.0663 -12.5009 -0.6115 Mín. -9.2690 -8.3555 -5.2340 -17.3027 -2.7837
Dif. 3.2354 13.4764 11.1288 8.2169 2.8719 Dif. 8.9174 29.5650 4.9493 12.0729 2.7194
5.259 1.777 Máx. 1.5072 -0.3062 -0.7136 -0.9279 4.0318 5.759 1.277 Máx. -0.4349 13.9925 -0.4275 -8.1982 0.7037
Mín. -3.6347 -9.4247 -13.7906 -12.8052 -1.0113 Mín. -7.6071 -13.9551 -4.7278 -16.0088 -0.7016
Dif. 5.1419 9.1184 13.0770 11.8773 5.0431 Dif. 7.1722 27.9476 4.3003 7.8106 1.4054
5.259 2.027 Máx. -1.4557 -2.1472 -0.3857 1.6042 6.1733 5.759 1.527 Máx. -0.3539 8.3852 -0.2850 -5.2379 2.7861
Mín. -4.8777 -9.9805 -16.2074 -10.9878 -2.2700 Mín. -9.2720 -21.1699 -5.2344 -17.3134 0.0661
Dif. 3.4220 7.8333 15.8218 12.5921 8.4433 Dif. 8.9181 29.5551 4.9494 12.0755 2.7200
5.259 2.277 Máx. -0.0238 1.7484 0.0292 1.9408 8.1942 5.759 1.777 Máx. 1.4597 1.8103 0.0763 1.1188 5.0077
Mín. -14.0261 -13.8034 -18.6205 -6.8558 -3.9334 Mín. -16.3348 -26.9220 -6.7358 -18.7138 0.0247
Dif. 14.0022 15.5519 18.6498 8.7966 12.1276 Dif. 17.7945 28.7323 6.8121 19.8326 4.9829
5.259 2.504 Máx. -0.0238 4.2517 0.0292 0.1895 8.2700 5.759 2.027 Máx. 3.1862 -7.9062 1.1255 8.4393 5.9251
Mín. -14.0261 -15.6646 -18.6205 -0.5665 -4.1979 Mín. -28.5178 -27.2108 -9.5848 -18.4099 -0.6958
Dif. 14.0022 19.9163 18.6498 0.7560 12.4680 Dif. 31.7040 19.3046 10.7103 26.8492 6.6209
5.509 0.050 Máx. -11.6561 30.4320 3.1349 0.8534 5.3619 5.759 2.277 Máx. -0.8498 -4.0381 4.3764 12.1943 6.1962
Mín. -20.0678 -11.1224 -16.9858 -0.3775 -8.9835 Mín. -44.9502 -35.2429 -13.2615 -15.9025 -5.3470
Dif. 8.4117 41.5544 20.1208 1.2309 14.3454 Dif. 44.1003 31.2048 17.6379 28.0968 11.5432
5.509 0.277 Máx. -11.6561 24.1187 3.1349 5.1808 4.4296 5.759 2.504 Máx. -0.8498 10.3838 4.3764 8.2052 4.3623
Mín. -20.0678 -4.3335 -16.9858 -10.7586 -8.7765 Mín. -44.9502 -49.7604 -13.2615 -1.3435 -7.0042
Dif. 8.4117 28.4522 20.1208 15.9393 13.2062 Dif. 44.1003 60.1441 17.6379 9.5488 11.3665
5.509 0.527 Máx. -0.3950 14.2147 0.9716 4.4345 1.2325 5.968 0.277 Máx. 8.4632 35.2294 6.0238 12.2100 9.1418
Mín. -16.5798 4.7306 -14.2213 -14.6720 -6.2531 Mín. -62.4304 4.0278 -0.5791 -15.8816 -6.4211
Dif. 16.1848 9.4841 15.1928 19.1065 7.4855 Dif. 70.8936 31.2015 6.6029 28.0916 15.5628
5.509 0.777 Máx. 1.2806 14.6558 -0.0899 0.2685 -0.4110 5.968 0.527 Máx. 5.1516 27.2237 0.6958 8.4578 1.2004
Mín. -11.3517 0.0416 -11.4319 -15.7602 -3.8138 Mín. -33.7095 7.9159 -0.3938 -18.3853 -6.0828
Dif. 12.6323 14.6142 11.3420 16.0287 3.4029 Dif. 38.8612 19.3078 1.0896 26.8431 7.2832
5.509 1.027 Máx. 0.2187 13.9879 -0.5749 -4.4689 -0.3303 5.968 0.777 Máx. 1.3757 26.9520 0.0371 1.1337 0.1740
Mín. -6.4280 -6.0418 -9.6037 -14.7798 -2.0278 Mín. -17.5718 -1.7878 -0.5399 -18.6940 -5.1244
Dif. 6.6467 20.0297 9.0287 10.3109 1.6976 Dif. 18.9475 28.7398 0.5770 19.8277 5.2984
5.509 1.277 Máx. 0.1710 10.2725 -0.7982 -7.7581 0.3679 5.968 1.027 Máx. -0.5020 21.2095 -0.0697 -5.2298 0.0125
Mín. -5.1275 -10.2305 -8.9047 -13.5309 -0.3665 Mín. -9.9688 -8.3555 -0.6066 -17.3027 -2.7872
Dif. 5.2985 20.5030 8.1065 5.7727 0.7344 Dif. 9.4668 29.5650 0.5369 12.0729 2.7998
5.509 1.527 Máx. 0.2131 6.0755 -0.5762 -4.4768 2.0295 5.968 1.277 Máx. -0.6486 13.9925 -0.0969 -8.1982 0.9408
Mín. -6.4355 -13.9430 -9.6054 -14.7904 0.3315 Mín. -8.1892 -13.9551 -0.6114 -16.0088 -0.9389
Dif. 6.6486 20.0185 9.0292 10.3136 1.6980 Dif. 7.5406 27.9476 0.5145 7.8106 1.8798
5.509 1.777 Máx. 1.2686 -0.0158 -0.0924 0.2538 3.8154 5.968 1.527 Máx. -0.5026 8.3852 -0.0697 -5.2379 2.7894
Mín. -11.3677 -14.6214 -11.4354 -15.7798 0.4122 Mín. -9.9696 -21.1699 -0.6066 -17.3134 -0.0109
Dif. 12.6363 14.6056 11.3429 16.0336 3.4032 Dif. 9.4670 29.5551 0.5369 12.0755 2.8003
5.509 2.027 Máx. -0.4139 -4.7202 0.9672 4.4168 6.2541 5.968 1.777 Máx. 1.3752 1.8103 0.0369 1.1188 5.1269
Mín. -16.6050 -14.2008 -14.2271 -14.6956 -1.2317 Mín. -17.5725 -26.9220 -0.5401 -18.7138 -0.1721
Dif. 16.1911 9.4806 15.1943 19.1123 7.4857 Dif. 18.9477 28.7323 0.5771 19.8326 5.2990
5.509 2.277 Máx. -11.6794 4.3225 3.1260 5.1676 8.7766 5.968 2.027 Máx. 5.1523 -7.9062 0.6949 8.4393 6.0872
Mín. -20.0988 -24.1332 -16.9978 -10.7761 -4.4296 Mín. -33.7088 -27.2108 -0.3944 -18.4099 -1.1971
Dif. 8.4194 28.4557 20.1238 15.9437 13.2062 Dif. 38.8611 19.3046 1.0894 26.8492 7.2843
5.509 2.504 Máx. -11.6794 11.0999 3.1260 0.8509 8.9831 5.968 2.277 Máx. 8.4665 -4.0381 6.0188 12.1943 6.4297
Mín. -20.0988 -30.4619 -16.9978 -0.3794 -5.3621 Mín. -62.4262 -35.2429 -0.5828 -15.9025 -9.1302
Dif. 8.4194 41.5617 20.1238 1.2303 14.3453 Dif. 70.8927 31.2048 6.6016 28.0968 15.5600
5.759 0.050 Máx. -0.8442 49.7309 4.3806 8.2123 7.0136
Mín. -44.9425 -10.4060 -13.2559 -1.3382 -4.3552
Dif. 44.0984 60.1369 17.6364 9.5505 11.3688
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
CORTANTE X
CORTANTE Y
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
CORTANTE TOTAL
MOMENTO X
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
MOMENTO Y
MOMENTO XY
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Cimentación
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
0.050 0.277 Máx. -6.0019 2.3663 0.5654 0.259 1.777 Máx. -6.8044 1.9746 0.5510
Mín. -10.8982 -2.0832 -0.5792 Mín. -9.9437 -2.2038 -0.4868
Dif. 4.8962 4.4495 1.1446 Dif. 3.1393 4.1785 1.0378
0.050 0.527 Máx. -6.4963 2.2983 0.5438 0.259 2.027 Máx. -6.5005 1.9798 0.5469
Mín. -10.3132 -1.9774 -0.5444 Mín. -10.3181 -2.2796 -0.5175
Dif. 3.8169 4.2757 1.0882 Dif. 3.8176 4.2594 1.0644
0.050 0.777 Máx. -6.6876 2.2142 0.5465 0.259 2.277 Máx. -6.0039 2.0163 0.5518
Mín. -10.0448 -1.9606 -0.5052 Mín. -10.8991 -2.3453 -0.5463
Dif. 3.3571 4.1748 1.0516 Dif. 4.8952 4.3616 1.0981
0.050 1.027 Máx. -6.6702 2.1256 0.5511 0.259 2.504 Máx. -5.5441 2.0617 0.5974
Mín. -10.0118 -1.9914 -0.4790 Mín. -11.4438 -2.3911 -0.5571
Dif. 3.3416 4.1170 1.0301 Dif. 5.8997 4.4528 1.1545
0.050 1.277 Máx. -6.6657 2.0427 0.5524 0.509 0.050 Máx. -5.5508 2.3282 0.5373
Mín. -9.9999 -2.0497 -0.4694 Mín. -11.4124 -2.0108 -0.5153
Dif. 3.3342 4.0925 1.0218 Dif. 5.8616 4.3390 1.0526
0.050 1.527 Máx. -6.6719 1.9844 0.5511 0.509 0.277 Máx. -6.0064 2.2955 0.5430
Mín. -10.0135 -2.1326 -0.4789 Mín. -10.8836 -2.0012 -0.4908
Dif. 3.3416 4.1170 1.0301 Dif. 4.8772 4.2967 1.0338
0.050 1.777 Máx. -6.6911 1.9536 0.5466 0.509 0.527 Máx. -6.5044 2.2429 0.5512
Mín. -10.0483 -2.2212 -0.5051 Mín. -10.3141 -1.9890 -0.4683
Dif. 3.3571 4.1748 1.0516 Dif. 3.8097 4.2319 1.0195
0.050 2.027 Máx. -6.5015 1.9703 0.5439 0.509 0.777 Máx. -6.9384 2.1786 0.5599
Mín. -10.3184 -2.3054 -0.5443 Mín. -9.8224 -1.9920 -0.4465
Dif. 3.8169 4.2757 1.0882 Dif. 2.8840 4.1706 1.0064
0.050 2.277 Máx. -6.0090 2.0760 0.5654 0.509 1.027 Máx. -6.9244 2.1117 0.5659
Mín. -10.9052 -2.3735 -0.5791 Mín. -9.7994 -2.0156 -0.4309
Dif. 4.8962 4.4495 1.1446 Dif. 2.8751 4.1273 0.9968
0.259 0.050 Máx. -5.5354 2.3840 0.5973 0.509 1.277 Máx. -6.9214 2.0502 0.5678
Mín. -11.4351 -2.0688 -0.5572 Mín. -9.7907 -2.0573 -0.4251
Dif. 5.8997 4.4528 1.1545 Dif. 2.8693 4.1075 0.9929
0.259 0.277 Máx. -5.9968 2.3382 0.5517 0.509 1.527 Máx. -6.9261 2.0085 0.5660
Mín. -10.8920 -2.0234 -0.5464 Mín. -9.8012 -2.1187 -0.4308
Dif. 4.8952 4.3616 1.0981 Dif. 2.8751 4.1273 0.9968
0.259 0.527 Máx. -6.4952 2.2725 0.5468 0.509 1.777 Máx. -6.9420 1.9849 0.5600
Mín. -10.3128 -1.9868 -0.5176 Mín. -9.8259 -2.1856 -0.4464
Dif. 3.8176 4.2594 1.0644 Dif. 2.8839 4.1706 1.0064
0.259 0.777 Máx. -6.8008 2.1968 0.5509 0.509 2.027 Máx. -6.5097 1.9819 0.5513
Mín. -9.9402 -1.9817 -0.4868 Mín. -10.3194 -2.2500 -0.4682
Dif. 3.1393 4.1785 1.0378 Dif. 3.8097 4.2319 1.0195
0.259 1.027 Máx. -6.7850 2.1194 0.5555 0.509 2.277 Máx. -6.0135 1.9941 0.5431
Mín. -9.9124 -2.0072 -0.4653 Mín. -10.8907 -2.3026 -0.4907
Dif. 3.1274 4.1266 1.0207 Dif. 4.8772 4.2967 1.0338
0.259 1.277 Máx. -6.7813 2.0485 0.5568 0.509 2.504 Máx. -5.5595 2.0037 0.5375
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
0.759 0.277 Máx. -6.0304 2.2486 0.5578 1.259 0.277 Máx. -6.1234 2.1818 0.6282
Mín. -10.8792 -1.9862 -0.4209 Mín. -10.9096 -1.9589 -0.2559
Dif. 4.8488 4.2348 0.9788 Dif. 4.7863 4.1406 0.8841
0.759 0.527 Máx. -6.5264 2.2096 0.5692 1.259 0.527 Máx. -6.6136 2.1574 0.6330
Mín. -10.3204 -1.9856 -0.4045 Mín. -10.3666 -1.9665 -0.2559
Dif. 3.7940 4.1952 0.9737 Dif. 3.7531 4.1239 0.8889
0.759 0.777 Máx. -7.0231 2.1575 0.5784 1.259 0.777 Máx. -7.1065 2.1204 0.6363
Mín. -9.7737 -1.9948 -0.3896 Mín. -9.8315 -1.9821 -0.2558
Dif. 2.7507 4.1523 0.9680 Dif. 2.7250 4.1025 0.8921
0.759 1.027 Máx. -7.0676 2.1010 0.5843 1.259 1.027 Máx. -7.3727 2.0768 0.6379
Mín. -9.6974 -2.0181 -0.3794 Mín. -9.5386 -2.0069 -0.2553
Dif. 2.6298 4.1191 0.9636 Dif. 2.1660 4.0837 0.8932
0.759 1.277 Máx. -7.0653 2.0479 0.5862 1.259 1.277 Máx. -7.3709 2.0328 0.6377
Mín. -9.6898 -2.0550 -0.3756 Mín. -9.5323 -2.0400 -0.2545
Dif. 2.6246 4.1029 0.9618 Dif. 2.1615 4.0728 0.8921
0.759 1.527 Máx. -7.0694 2.0110 0.5843 1.259 1.527 Máx. -7.3744 1.9997 0.6379
Mín. -9.6991 -2.1081 -0.3793 Mín. -9.5404 -2.0840 -0.2553
Dif. 2.6298 4.1191 0.9636 Dif. 2.1660 4.0837 0.8932
0.759 1.777 Máx. -7.0266 1.9877 0.5785 1.259 1.777 Máx. -7.1101 1.9749 0.6364
Mín. -9.7773 -2.1646 -0.3896 Mín. -9.8351 -2.1276 -0.2557
Dif. 2.7507 4.1523 0.9680 Dif. 2.7250 4.1025 0.8921
0.759 2.027 Máx. -6.5318 1.9785 0.5693 1.259 2.027 Máx. -6.6190 1.9593 0.6331
Mín. -10.3257 -2.2167 -0.4043 Mín. -10.3720 -2.1646 -0.2558
Dif. 3.7940 4.1952 0.9737 Dif. 3.7531 4.1239 0.8889
0.759 2.277 Máx. -6.0375 1.9790 0.5580 1.259 2.277 Máx. -6.1306 1.9516 0.6283
Mín. -10.8863 -2.2557 -0.4208 Mín. -10.9168 -2.1890 -0.2558
Dif. 4.8488 4.2348 0.9788 Dif. 4.7863 4.1406 0.8841
0.759 2.504 Máx. -5.5882 1.9800 0.5414 1.259 2.504 Máx. -5.6882 1.9484 0.6208
Mín. -11.4027 -2.2761 -0.4416 Mín. -11.4154 -2.1987 -0.2557
Dif. 5.8145 4.2561 0.9830 Dif. 5.7272 4.1472 0.8766
1.009 0.050 Máx. -5.6220 2.2224 0.5742 1.509 0.050 Máx. -5.7509 2.1764 0.6704
Mín. -11.3902 -1.9709 -0.3509 Mín. -11.4447 -1.9391 -0.1683
Dif. 5.7682 4.1932 0.9251 Dif. 5.6938 4.1155 0.8386
1.009 0.277 Máx. -6.0694 2.2092 0.5885 1.509 0.277 Máx. -6.1912 2.1679 0.6697
Mín. -10.8863 -1.9729 -0.3396 Mín. -10.9512 -1.9427 -0.1798
Dif. 4.8169 4.1821 0.9281 Dif. 4.7600 4.1106 0.8495
1.009 0.527 Máx. -6.5628 2.1796 0.5980 1.509 0.527 Máx. -6.6774 2.1453 0.6683
Mín. -10.3367 -1.9779 -0.3310 Mín. -10.4116 -1.9517 -0.1885
Dif. 3.7739 4.1575 0.9290 Dif. 3.7341 4.0970 0.8568
1.009 0.777 Máx. -7.0582 2.1371 0.6053 1.509 0.777 Máx. -7.1668 2.1099 0.6665
Mín. -9.7966 -1.9910 -0.3235 Mín. -9.8793 -1.9691 -0.1956
Dif. 2.7383 4.1281 0.9288 Dif. 2.7125 4.0789 0.8621
1.009 1.027 Máx. -7.2166 2.0888 0.6095 1.509 1.027 Máx. -7.5360 2.0670 0.6646
Mín. -9.6099 -2.0148 -0.3182 Mín. -9.4829 -1.9957 -0.1998
Dif. 2.3933 4.1036 0.9277 Dif. 1.9468 4.0626 0.8644
1.009 1.277 Máx. -7.2147 2.0417 0.6105 1.509 1.277 Máx. -7.5340 2.0227 0.6631
Mín. -9.6032 -2.0489 -0.3158 Mín. -9.4766 -2.0299 -0.2004
Dif. 2.3885 4.0906 0.9264 Dif. 1.9425 4.0526 0.8635
1.009 1.527 Máx. -7.2184 2.0076 0.6096 1.509 1.527 Máx. -7.5378 1.9884 0.6647
Mín. -9.6117 -2.0959 -0.3182 Mín. -9.4847 -2.0742 -0.1998
Dif. 2.3933 4.1035 0.9277 Dif. 1.9468 4.0626 0.8644
1.009 1.777 Máx. -7.0618 1.9838 0.6053 1.509 1.777 Máx. -7.1704 1.9618 0.6665
Mín. -9.8002 -2.1442 -0.3234 Mín. -9.8829 -2.1171 -0.1956
Dif. 2.7383 4.1281 0.9288 Dif. 2.7125 4.0789 0.8621
1.009 2.027 Máx. -6.5682 1.9708 0.5982 1.509 2.027 Máx. -6.6829 1.9444 0.6684
Mín. -10.3421 -2.1868 -0.3309 Mín. -10.4170 -2.1525 -0.1885
Dif. 3.7739 4.1575 0.9290 Dif. 3.7341 4.0970 0.8568
1.009 2.277 Máx. -6.0766 1.9657 0.5887 1.509 2.277 Máx. -6.1985 1.9354 0.6698
Mín. -10.8934 -2.2163 -0.3394 Mín. -10.9585 -2.1752 -0.1797
Dif. 4.8169 4.1821 0.9281 Dif. 4.7600 4.1106 0.8495
MOD-A4-E_Is.00
1.009 2.504 Máx. -5.6308 1.9637 0.5744 1.509 2.504 Máx. -5.7598 1.9318 0.6706
Mín. -11.3990 -2.2295 -0.3507 Mín. -11.4536 -2.1837 -0.1681
Dif. 5.7682 4.1932 0.9251 Dif. 5.6938 4.1155 0.8386
1.259 0.050 Máx. -5.6794 2.1915 0.6206 1.759 0.050 Máx. -5.8343 2.1768 0.7207
Mín. -11.4066 -1.9557 -0.2560 Mín. -11.5036 -1.9205 -0.1035
Dif. 5.7272 4.1472 0.8766 Dif. 5.6693 4.0973 0.8242
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
1.759 0.277 Máx. -6.2704 2.1680 0.7091 2.259 0.277 Máx. -6.4444 2.2082 0.7501
Mín. -11.0100 -1.9241 -0.1247 Mín. -11.1614 -1.8824 -0.1003
Dif. 4.7397 4.0921 0.8338 Dif. 4.7170 4.0906 0.8504
1.759 0.527 Máx. -6.7518 2.1442 0.6995 2.259 0.527 Máx. -6.9144 2.1721 0.7276
Mín. -10.4703 -1.9336 -0.1403 Mín. -10.6119 -1.8906 -0.1223
Dif. 3.7185 4.0778 0.8398 Dif. 3.6975 4.0627 0.8498
1.759 0.777 Máx. -7.2367 2.1064 0.6908 2.259 0.777 Máx. -7.3881 2.1190 0.7076
Mín. -9.9385 -1.9528 -0.1529 Mín. -10.0743 -1.9134 -0.1395
Dif. 2.7018 4.0592 0.8437 Dif. 2.6862 4.0324 0.8471
1.759 1.027 Máx. -7.7056 2.0603 0.6845 2.259 1.027 Máx. -7.8696 2.0570 0.6939
Mín. -9.4397 -1.9821 -0.1604 Mín. -9.5519 -1.9513 -0.1500
Dif. 1.7341 4.0425 0.8449 Dif. 1.6823 4.0082 0.8439
1.759 1.277 Máx. -7.7031 2.0124 0.6815 2.259 1.277 Máx. -8.0472 1.9936 0.6885
Mín. -9.4330 -2.0197 -0.1623 Mín. -9.3614 -2.0007 -0.1529
Dif. 1.7299 4.0321 0.8438 Dif. 1.3142 3.9943 0.8414
1.759 1.527 Máx. -7.7074 1.9749 0.6845 2.259 1.527 Máx. -7.8714 1.9441 0.6938
Mín. -9.4415 -2.0676 -0.1605 Mín. -9.5537 -2.0641 -0.1501
Dif. 1.7341 4.0425 0.8449 Dif. 1.6823 4.0082 0.8439
1.759 1.777 Máx. -7.2403 1.9455 0.6908 2.259 1.777 Máx. -7.3917 1.9061 0.7075
Mín. -9.9421 -2.1137 -0.1529 Mín. -10.0779 -2.1263 -0.1396
Dif. 2.7018 4.0592 0.8437 Dif. 2.6862 4.0324 0.8471
1.759 2.027 Máx. -6.7573 1.9263 0.6995 2.259 2.027 Máx. -6.9198 1.8833 0.7275
Mín. -10.4758 -2.1515 -0.1403 Mín. -10.6173 -2.1794 -0.1224
Dif. 3.7185 4.0778 0.8398 Dif. 3.6975 4.0627 0.8498
1.759 2.277 Máx. -6.2776 1.9167 0.7092 2.259 2.277 Máx. -6.4516 1.8749 0.7500
Mín. -11.0173 -2.1754 -0.1246 Mín. -11.1686 -2.2156 -0.1005
Dif. 4.7397 4.0921 0.8338 Dif. 4.7170 4.0906 0.8504
1.759 2.504 Máx. -5.8433 1.9132 0.7209 2.259 2.504 Máx. -6.0273 1.8732 0.7775
Mín. -11.5126 -2.1842 -0.1033 Mín. -11.6756 -2.2318 -0.0694
Dif. 5.6693 4.0973 0.8242 Dif. 5.6483 4.1050 0.8469
2.009 0.050 Máx. -5.9255 2.1924 0.7598 2.509 0.050 Máx. -6.1062 2.2691 0.7644
Mín. -11.5798 -1.9008 -0.0676 Mín. -11.7559 -1.8763 -0.1273
Dif. 5.6543 4.0932 0.8274 Dif. 5.6497 4.1453 0.8917
2.009 0.277 Máx. -6.3565 2.1822 0.7383 2.509 0.277 Máx. -6.5290 2.2413 0.7404
Mín. -11.0821 -1.9031 -0.0974 Mín. -11.2406 -1.8686 -0.1383
Dif. 4.7256 4.0853 0.8358 Dif. 4.7116 4.1099 0.8787
2.009 0.527 Máx. -6.8324 2.1540 0.7214 2.509 0.527 Máx. -6.9935 2.1936 0.7149
Mín. -10.5389 -1.9127 -0.1186 Mín. -10.6836 -1.8694 -0.1523
Dif. 3.7065 4.0667 0.8400 Dif. 3.6901 4.0631 0.8671
2.009 0.777 Máx. -7.3120 2.1100 0.7065 2.509 0.777 Máx. -7.4611 2.1303 0.6917
Mín. -10.0051 -1.9339 -0.1353 Mín. -10.1414 -1.8929 -0.1648
Dif. 2.6931 4.0439 0.8418 Dif. 2.6803 4.0233 0.8565
2.009 1.027 Máx. -7.7985 2.0572 0.6962 2.509 1.027 Máx. -7.9375 2.0584 0.6764
Mín. -9.4840 -1.9671 -0.1454 Mín. -9.6172 -1.9361 -0.1726
Dif. 1.6855 4.0243 0.8416 Dif. 1.6797 3.9944 0.8490
2.009 1.277 Máx. -7.8751 2.0026 0.6918 2.509 1.277 Máx. -8.2164 1.9857 0.6707
Mín. -9.3964 -2.0098 -0.1481 Mín. -9.3230 -1.9928 -0.1747
Dif. 1.5213 4.0124 0.8398 Dif. 1.1066 3.9785 0.8455
2.009 1.527 Máx. -7.8002 1.9599 0.6961 2.509 1.527 Máx. -7.9393 1.9290 0.6764
Mín. -9.4858 -2.0644 -0.1454 Mín. -9.6190 -2.0655 -0.1726
Dif. 1.6855 4.0243 0.8416 Dif. 1.6797 3.9944 0.8490
2.009 1.777 Máx. -7.3156 1.9266 0.7065 2.509 1.777 Máx. -7.4646 1.8858 0.6916
Mín. -10.0087 -2.1173 -0.1353 Mín. -10.1450 -2.1375 -0.1649
Dif. 2.6931 4.0439 0.8418 Dif. 2.6803 4.0233 0.8565
2.009 2.027 Máx. -6.8378 1.9054 0.7213 2.509 2.027 Máx. -6.9989 1.8622 0.7147
Mín. -10.5443 -2.1613 -0.1187 Mín. -10.6889 -2.2009 -0.1524
Dif. 3.7065 4.0667 0.8400 Dif. 3.6901 4.0631 0.8671
2.009 2.277 Máx. -6.3638 1.8957 0.7383 2.509 2.277 Máx. -6.5362 1.8612 0.7402
Mín. -11.0894 -2.1896 -0.0975 Mín. -11.2478 -2.2487 -0.1384
Dif. 4.7256 4.0853 0.8358 Dif. 4.7116 4.1099 0.8787
MOD-A4-E_Is.00
2.009 2.504 Máx. -5.9345 1.8934 0.7598 2.509 2.504 Máx. -6.1151 1.8688 0.7643
Mín. -11.5887 -2.1998 -0.0676 Mín. -11.7648 -2.2765 -0.1275
Dif. 5.6543 4.0932 0.8274 Dif. 5.6497 4.1453 0.8917
2.259 0.050 Máx. -6.0183 2.2243 0.7776 2.759 0.050 Máx. -6.1810 2.2933 0.7042
Mín. -11.6666 -1.8807 -0.0693 Mín. -11.8374 -1.9288 -0.2842
Dif. 5.6483 4.1050 0.8469 Dif. 5.6564 4.2221 0.9884
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
2.759 0.277 Máx. -6.6046 2.2676 0.7037 3.259 0.277 Máx. -6.6910 2.2672 0.5591
Mín. -11.3109 -1.8674 -0.2124 Mín. -11.3973 -1.8679 -0.3571
Dif. 4.7063 4.1350 0.9162 Dif. 4.7063 4.1350 0.9162
2.759 0.527 Máx. -7.0640 2.2122 0.6788 3.259 0.527 Máx. -7.1505 2.2122 0.5531
Mín. -10.7475 -1.8525 -0.2064 Mín. -10.8340 -1.8525 -0.3321
Dif. 3.6834 4.0647 0.8851 Dif. 3.6834 4.0647 0.8852
2.759 0.777 Máx. -7.5258 2.1398 0.6569 3.259 0.777 Máx. -7.6122 2.1401 0.5543
Mín. -10.2015 -1.8756 -0.2079 Mín. -10.2879 -1.8754 -0.3105
Dif. 2.6757 4.0155 0.8648 Dif. 2.6757 4.0155 0.8648
2.759 1.027 Máx. -7.9979 2.0599 0.6434 3.259 1.027 Máx. -8.0843 2.0602 0.5555
Mín. -9.6758 -1.9240 -0.2095 Mín. -9.7621 -1.9238 -0.2973
Dif. 1.6778 3.9840 0.8529 Dif. 1.6778 3.9840 0.8529
2.759 1.277 Máx. -8.3795 1.9799 0.6386 3.259 1.277 Máx. -8.4658 1.9799 0.5556
Mín. -9.2769 -1.9869 -0.2097 Mín. -9.3633 -1.9869 -0.2928
Dif. 0.8974 3.9668 0.8484 Dif. 0.8974 3.9668 0.8484
2.759 1.527 Máx. -7.9997 1.9169 0.6433 3.259 1.527 Máx. -8.0860 1.9168 0.5554
Mín. -9.6775 -2.0670 -0.2095 Mín. -9.7638 -2.0671 -0.2974
Dif. 1.6778 3.9840 0.8529 Dif. 1.6778 3.9840 0.8529
2.759 1.777 Máx. -7.5293 1.8685 0.6568 3.259 1.777 Máx. -7.6157 1.8683 0.5541
Mín. -10.2050 -2.1470 -0.2080 Mín. -10.2914 -2.1471 -0.3107
Dif. 2.6757 4.0155 0.8648 Dif. 2.6757 4.0155 0.8648
2.759 2.027 Máx. -7.0694 1.8453 0.6786 3.259 2.027 Máx. -7.1558 1.8453 0.5528
Mín. -10.7528 -2.2194 -0.2065 Mín. -10.8392 -2.2194 -0.3323
Dif. 3.6834 4.0647 0.8851 Dif. 3.6834 4.0647 0.8852
2.759 2.277 Máx. -6.6118 1.8600 0.7036 3.259 2.277 Máx. -6.6981 1.8605 0.5588
Mín. -11.3181 -2.2750 -0.2126 Mín. -11.4043 -2.2745 -0.3574
Dif. 4.7063 4.1350 0.9162 Dif. 4.7063 4.1350 0.9162
2.759 2.504 Máx. -6.1899 1.9214 0.7041 3.259 2.504 Máx. -6.2758 1.9223 0.6289
Mín. -11.8462 -2.3007 -0.2844 Mín. -11.9322 -2.2998 -0.3595
Dif. 5.6564 4.2221 0.9884 Dif. 5.6564 4.2221 0.9884
3.009 0.200 Máx. -6.5474 2.2605 0.6851 3.509 0.050 Máx. -6.2795 2.2689 0.4781
Mín. -11.5486 -2.0404 -0.3421 Mín. -11.9292 -1.8764 -0.4137
Dif. 5.0012 4.3008 1.0272 Dif. 5.6497 4.1453 0.8918
3.009 0.277 Máx. -6.6661 2.2692 0.6410 3.509 0.277 Máx. -6.7024 2.2416 0.4877
Mín. -11.3649 -1.8749 -0.2957 Mín. -11.4140 -1.8683 -0.3910
Dif. 4.6988 4.1442 0.9367 Dif. 4.7116 4.1099 0.8787
3.009 0.527 Máx. -7.1191 2.2187 0.6179 3.509 0.527 Máx. -7.1668 2.1943 0.5007
Mín. -10.7985 -1.8413 -0.2720 Mín. -10.8569 -1.8687 -0.3664
Dif. 3.6794 4.0601 0.8899 Dif. 3.6901 4.0631 0.8671
3.009 0.777 Máx. -7.5772 2.1438 0.6056 3.509 0.777 Máx. -7.6342 2.1311 0.5125
Mín. -10.2507 -1.8672 -0.2597 Mín. -10.3145 -1.8922 -0.3441
Dif. 2.6735 4.0110 0.8653 Dif. 2.6803 4.0233 0.8565
3.009 1.027 Máx. -8.0474 2.0604 0.5988 3.509 1.027 Máx. -8.1105 2.0589 0.5197
Mín. -9.7243 -1.9187 -0.2532 Mín. -9.7902 -1.9355 -0.3293
Dif. 1.6769 3.9791 0.8520 Dif. 1.6797 3.9944 0.8490
3.009 1.277 Máx. -8.5336 1.9772 0.5964 3.509 1.277 Máx. -8.3893 1.9858 0.5216
Mín. -9.2201 -1.9842 -0.2509 Mín. -9.4959 -1.9927 -0.3238
Dif. 0.6865 3.9615 0.8473 Dif. 1.1066 3.9785 0.8455
3.009 1.527 Máx. -8.0491 1.9116 0.5988 3.509 1.527 Máx. -8.1122 1.9287 0.5196
Mín. -9.7261 -2.0674 -0.2532 Mín. -9.7919 -2.0658 -0.3294
Dif. 1.6769 3.9791 0.8520 Dif. 1.6797 3.9944 0.8490
3.009 1.777 Máx. -7.5807 1.8601 0.6054 3.509 1.777 Máx. -7.6376 1.8852 0.5123
Mín. -10.2542 -2.1509 -0.2598 Mín. -10.3179 -2.1381 -0.3443
Dif. 2.6735 4.0110 0.8653 Dif. 2.6803 4.0233 0.8565
3.009 2.027 Máx. -7.1244 1.8341 0.6178 3.509 2.027 Máx. -7.1720 1.8616 0.5004
Mín. -10.8038 -2.2260 -0.2721 Mín. -10.8621 -2.2015 -0.3667
Dif. 3.6794 4.0601 0.8899 Dif. 3.6901 4.0631 0.8671
3.009 2.277 Máx. -6.6732 1.8675 0.6408 3.509 2.277 Máx. -6.7094 1.8609 0.4873
Mín. -11.3720 -2.2766 -0.2959 Mín. -11.4210 -2.2489 -0.3913
Dif. 4.6988 4.1442 0.9367 Dif. 4.7116 4.1099 0.8787
MOD-A4-E_Is.00
3.009 2.354 Máx. -6.5551 2.0329 0.6850 3.509 2.504 Máx. -6.2882 1.8690 0.4777
Mín. -11.5563 -2.2679 -0.3422 Mín. -11.9379 -2.2763 -0.4140
Dif. 5.0012 4.3008 1.0272 Dif. 5.6497 4.1453 0.8918
3.259 0.050 Máx. -6.2670 2.2923 0.6291 3.759 0.050 Máx. -6.2799 2.2261 0.4228
Mín. -11.9234 -1.9297 -0.3593 Mín. -11.9281 -1.8789 -0.4241
Dif. 5.6563 4.2221 0.9884 Dif. 5.6482 4.1050 0.8469
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
3.759 0.277 Máx. -6.7055 2.2100 0.4519 4.259 0.277 Máx. -6.7082 2.1713 0.4751
Mín. -11.4225 -1.8806 -0.3985 Mín. -11.4479 -1.9209 -0.3587
Dif. 4.7169 4.0906 0.8504 Dif. 4.7397 4.0921 0.8338
3.759 0.527 Máx. -7.1751 2.1739 0.4726 4.259 0.527 Máx. -7.1886 2.1476 0.4910
Mín. -10.8725 -1.8888 -0.3773 Mín. -10.9070 -1.9302 -0.3489
Dif. 3.6975 4.0627 0.8498 Dif. 3.7185 4.0778 0.8399
3.759 0.777 Máx. -7.6483 2.1206 0.4888 4.259 0.777 Máx. -7.6726 2.1091 0.5035
Mín. -10.3345 -1.9118 -0.3583 Mín. -10.3743 -1.9502 -0.3401
Dif. 2.6862 4.0324 0.8471 Dif. 2.7018 4.0592 0.8437
3.759 1.027 Máx. -8.1295 2.0579 0.4987 4.259 1.027 Máx. -8.1408 2.0619 0.5111
Mín. -9.8117 -1.9503 -0.3452 Mín. -9.8749 -1.9806 -0.3338
Dif. 1.6822 4.0082 0.8439 Dif. 1.7341 4.0425 0.8449
3.759 1.277 Máx. -8.3069 1.9938 0.5014 4.259 1.277 Máx. -8.1380 2.0128 0.5129
Mín. -9.6210 -2.0005 -0.3400 Mín. -9.8680 -2.0193 -0.3309
Dif. 1.3142 3.9943 0.8414 Dif. 1.7299 4.0321 0.8438
3.759 1.527 Máx. -8.1312 1.9436 0.4986 4.259 1.527 Máx. -8.1425 1.9740 0.5110
Mín. -9.8134 -2.0647 -0.3453 Mín. -9.8765 -2.0684 -0.3339
Dif. 1.6823 4.0082 0.8439 Dif. 1.7341 4.0425 0.8449
3.759 1.777 Máx. -7.6517 1.9050 0.4886 4.259 1.777 Máx. -7.6758 1.9435 0.5033
Mín. -10.3378 -2.1274 -0.3585 Mín. -10.3776 -2.1157 -0.3404
Dif. 2.6862 4.0324 0.8471 Dif. 2.7018 4.0592 0.8437
3.759 2.027 Máx. -7.1802 1.8817 0.4722 4.259 2.027 Máx. -7.1935 1.9234 0.4906
Mín. -10.8776 -2.1809 -0.3776 Mín. -10.9119 -2.1544 -0.3492
Dif. 3.6975 4.0627 0.8498 Dif. 3.7185 4.0778 0.8399
3.759 2.277 Máx. -6.7124 1.8733 0.4515 4.259 2.277 Máx. -6.7148 1.9138 0.4746
Mín. -11.4294 -2.2173 -0.3989 Mín. -11.4545 -2.1783 -0.3592
Dif. 4.7170 4.0906 0.8504 Dif. 4.7397 4.0921 0.8338
3.759 2.504 Máx. -6.2885 1.8716 0.4223 4.259 2.504 Máx. -6.2814 1.9119 0.4520
Mín. -11.9367 -2.2335 -0.4246 Mín. -11.9507 -2.1855 -0.3722
Dif. 5.6482 4.1050 0.8469 Dif. 5.6693 4.0973 0.8242
4.009 0.050 Máx. -6.2757 2.1955 0.4210 4.509 0.050 Máx. -6.2764 2.1756 0.5085
Mín. -11.9299 -1.8976 -0.4064 Mín. -11.9702 -1.9399 -0.3301
Dif. 5.6542 4.0932 0.8274 Dif. 5.6938 4.1155 0.8386
4.009 0.277 Máx. -6.7059 2.1853 0.4501 4.509 0.277 Máx. -6.7163 2.1697 0.5227
Mín. -11.4314 -1.9000 -0.3857 Mín. -11.4763 -1.9409 -0.3268
Dif. 4.7256 4.0853 0.8358 Dif. 4.7600 4.1106 0.8495
4.009 0.527 Máx. -7.1808 2.1569 0.4704 4.509 0.527 Máx. -7.2017 2.1479 0.5329
Mín. -10.8873 -1.9098 -0.3697 Mín. -10.9358 -1.9491 -0.3239
Dif. 3.7065 4.0667 0.8401 Dif. 3.7341 4.0970 0.8568
4.009 0.777 Máx. -7.6597 2.1123 0.4863 4.509 0.777 Máx. -7.6904 2.1121 0.5409
Mín. -10.3528 -1.9316 -0.3555 Mín. -10.4028 -1.9668 -0.3211
Dif. 2.6931 4.0439 0.8418 Dif. 2.7125 4.0789 0.8621
4.009 1.027 Máx. -8.1457 2.0586 0.4960 4.509 1.027 Máx. -8.0590 2.0684 0.5456
Mín. -9.8312 -1.9657 -0.3456 Mín. -10.0058 -1.9942 -0.3188
Dif. 1.6855 4.0243 0.8416 Dif. 1.9468 4.0626 0.8644
4.009 1.277 Máx. -8.2221 2.0029 0.4984 4.509 1.277 Máx. -8.0568 2.0231 0.5464
Mín. -9.7434 -2.0095 -0.3414 Mín. -9.9993 -2.0295 -0.3171
Dif. 1.5213 4.0124 0.8398 Dif. 1.9425 4.0526 0.8635
4.009 1.527 Máx. -8.1473 1.9591 0.4958 4.509 1.527 Máx. -8.0606 1.9878 0.5455
Mín. -9.8328 -2.0652 -0.3457 Mín. -10.0074 -2.0748 -0.3189
Dif. 1.6855 4.0243 0.8416 Dif. 1.9468 4.0626 0.8644
4.009 1.777 Máx. -7.6630 1.9248 0.4861 4.509 1.777 Máx. -7.6936 1.9603 0.5407
Mín. -10.3561 -2.1191 -0.3558 Mín. -10.4060 -2.1186 -0.3213
Dif. 2.6931 4.0439 0.8418 Dif. 2.7125 4.0789 0.8621
4.009 2.027 Máx. -7.1859 1.9028 0.4700 4.509 2.027 Máx. -7.2066 1.9424 0.5326
Mín. -10.8923 -2.1638 -0.3700 Mín. -10.9407 -2.1546 -0.3242
Dif. 3.7065 4.0667 0.8401 Dif. 3.7341 4.0970 0.8568
4.009 2.277 Máx. -6.7126 1.8928 0.4496 4.509 2.277 Máx. -6.7229 1.9340 0.5223
Mín. -11.4382 -2.1925 -0.3862 Mín. -11.4829 -2.1766 -0.3272
Dif. 4.7256 4.0853 0.8358 Dif. 4.7600 4.1106 0.8495
MOD-A4-E_Is.00
4.009 2.504 Máx. -6.2842 1.8904 0.4204 4.509 2.504 Máx. -6.2846 1.9329 0.5079
Mín. -11.9384 -2.2028 -0.4070 Mín. -11.9784 -2.1826 -0.3307
Dif. 5.6542 4.0932 0.8274 Dif. 5.6938 4.1155 0.8386
4.259 0.050 Máx. -6.2731 2.1783 0.4526 4.759 0.050 Máx. -6.2888 2.1880 0.5848
Mín. -11.9424 -1.9190 -0.3716 Mín. -12.0160 -1.9592 -0.2918
Dif. 5.6693 4.0973 0.8242 Dif. 5.7272 4.1472 0.8766
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
4.759 0.277 Máx. -6.7331 2.1813 0.5874 5.259 0.277 Máx. -6.7997 2.2451 0.7336
Mín. -11.5193 -1.9593 -0.2967 Mín. -11.6485 -1.9896 -0.2452
Dif. 4.7862 4.1406 0.8841 Dif. 4.8488 4.2348 0.9787
4.759 0.527 Máx. -7.2230 2.1584 0.5895 5.259 0.527 Máx. -7.2965 2.2075 0.7178
Mín. -10.9761 -1.9655 -0.2994 Mín. -11.0904 -1.9877 -0.2558
Dif. 3.7530 4.1239 0.8889 Dif. 3.7940 4.1952 0.9737
4.759 0.777 Máx. -7.7156 2.1217 0.5908 5.259 0.777 Máx. -7.7935 2.1566 0.7037
Mín. -10.4406 -1.9808 -0.3012 Mín. -10.5441 -1.9957 -0.2643
Dif. 2.7250 4.1025 0.8921 Dif. 2.7506 4.1523 0.9680
4.759 1.027 Máx. -7.9814 2.0778 0.5912 5.259 1.027 Máx. -7.8382 2.1009 0.6939
Mín. -10.1474 -2.0059 -0.3020 Mín. -10.4679 -2.0182 -0.2698
Dif. 2.1660 4.0837 0.8932 Dif. 2.6297 4.1191 0.9636
4.759 1.277 Máx. -7.9794 2.0333 0.5906 5.259 1.277 Máx. -7.8358 2.0483 0.6902
Mín. -10.1409 -2.0396 -0.3015 Mín. -10.4603 -2.0546 -0.2715
Dif. 2.1614 4.0728 0.8921 Dif. 2.6246 4.1029 0.9618
4.759 1.527 Máx. -7.9830 1.9996 0.5912 5.259 1.527 Máx. -7.8397 2.0119 0.6938
Mín. -10.1489 -2.0841 -0.3020 Mín. -10.4695 -2.1072 -0.2698
Dif. 2.1660 4.0837 0.8932 Dif. 2.6297 4.1191 0.9636
4.759 1.777 Máx. -7.7187 1.9744 0.5907 5.259 1.777 Máx. -7.7967 1.9893 0.7037
Mín. -10.4437 -2.1281 -0.3014 Mín. -10.5473 -2.1630 -0.2643
Dif. 2.7250 4.1025 0.8921 Dif. 2.7506 4.1523 0.9680
4.759 2.027 Máx. -7.2278 1.9590 0.5893 5.259 2.027 Máx. -7.3012 1.9812 0.7178
Mín. -10.9808 -2.1649 -0.2996 Mín. -11.0952 -2.2140 -0.2559
Dif. 3.7530 4.1239 0.8889 Dif. 3.7940 4.1952 0.9737
4.759 2.277 Máx. -6.7395 1.9525 0.5871 5.259 2.277 Máx. -6.8060 1.9831 0.7335
Mín. -11.5258 -2.1881 -0.2970 Mín. -11.6548 -2.2517 -0.2452
Dif. 4.7862 4.1406 0.8841 Dif. 4.8488 4.2348 0.9787
4.759 2.504 Máx. -6.2968 1.9523 0.5843 5.259 2.504 Máx. -6.3555 1.9851 0.7538
Mín. -12.0240 -2.1948 -0.2923 Mín. -12.1699 -2.2710 -0.2292
Dif. 5.7272 4.1472 0.8765 Dif. 5.8144 4.2561 0.9829
5.009 0.050 Máx. -6.3119 2.2183 0.6693 5.509 0.050 Máx. -6.3963 2.3236 0.8262
Mín. -12.0801 -1.9749 -0.2558 Mín. -12.2578 -2.0154 -0.2264
Dif. 5.7682 4.1932 0.9251 Dif. 5.8615 4.3390 1.0526
5.009 0.277 Máx. -6.7602 2.2067 0.6596 5.509 0.277 Máx. -6.8531 2.2919 0.8009
Mín. -11.5771 -1.9753 -0.2684 Mín. -11.7302 -2.0048 -0.2330
Dif. 4.8168 4.1821 0.9280 Dif. 4.8771 4.2967 1.0338
5.009 0.527 Máx. -7.2541 2.1787 0.6527 5.509 0.527 Máx. -7.3519 2.2406 0.7779
Mín. -11.0279 -1.9788 -0.2763 Mín. -11.1615 -1.9913 -0.2416
Dif. 3.7739 4.1575 0.9290 Dif. 3.8096 4.2319 1.0194
5.009 0.777 Máx. -7.7496 2.1371 0.6466 5.509 0.777 Máx. -7.7864 2.1774 0.7559
Mín. -10.4879 -1.9910 -0.2822 Mín. -10.6703 -1.9931 -0.2506
Dif. 2.7383 4.1281 0.9288 Dif. 2.8839 4.1706 1.0064
5.009 1.027 Máx. -7.9079 2.0891 0.6421 5.509 1.027 Máx. -7.7725 2.1114 0.7401
Mín. -10.3011 -2.0144 -0.2856 Mín. -10.6476 -2.0159 -0.2567
Dif. 2.3933 4.1035 0.9277 Dif. 2.8750 4.1273 0.9968
5.009 1.277 Máx. -7.9058 2.0421 0.6400 5.509 1.277 Máx. -7.7695 2.0506 0.7343
Mín. -10.2943 -2.0484 -0.2863 Mín. -10.6388 -2.0569 -0.2586
Dif. 2.3885 4.0906 0.9264 Dif. 2.8693 4.1075 0.9929
5.009 1.527 Máx. -7.9094 2.0081 0.6421 5.509 1.527 Máx. -7.7741 2.0096 0.7401
Mín. -10.3027 -2.0954 -0.2856 Mín. -10.6491 -2.1177 -0.2566
Dif. 2.3933 4.1035 0.9277 Dif. 2.8750 4.1273 0.9968
5.009 1.777 Máx. -7.7527 1.9846 0.6465 5.509 1.777 Máx. -7.7895 1.9868 0.7559
Mín. -10.4910 -2.1434 -0.2822 Mín. -10.6735 -2.1838 -0.2506
Dif. 2.7383 4.1281 0.9288 Dif. 2.8839 4.1706 1.0064
5.009 2.027 Máx. -7.2588 1.9723 0.6526 5.509 2.027 Máx. -7.3566 1.9848 0.7779
Mín. -11.0327 -2.1852 -0.2764 Mín. -11.1663 -2.2471 -0.2416
Dif. 3.7739 4.1575 0.9290 Dif. 3.8096 4.2319 1.0194
5.009 2.277 Máx. -6.7666 1.9687 0.6594 5.509 2.277 Máx. -6.8594 1.9983 0.8009
Mín. -11.5834 -2.2134 -0.2686 Mín. -11.7366 -2.2984 -0.2329
Dif. 4.8168 4.1821 0.9280 Dif. 4.8771 4.2967 1.0338
MOD-A4-E_Is.00
5.009 2.504 Máx. -6.3198 1.9681 0.6690 5.509 2.504 Máx. -6.4042 2.0088 0.8262
Mín. -12.0880 -2.2251 -0.2561 Mín. -12.2657 -2.3301 -0.2264
Dif. 5.7682 4.1932 0.9251 Dif. 5.8615 4.3390 1.0526
5.259 0.050 Máx. -6.3476 2.2644 0.7539 5.759 0.050 Máx. -6.4583 2.3815 0.8729
Mín. -12.1621 -1.9917 -0.2291 Mín. -12.3580 -2.0713 -0.2817
Dif. 5.8144 4.2561 0.9829 Dif. 5.8997 4.4528 1.1545
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Deformada
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Situaciones accidentales
Viga Tensión media Tensión en bordes
Estado
(MPa) (MPa)
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Situaciones accidentales
Viga Tensión media Tensión en bordes
Estado
Pórtico Tramo Dimensión (MPa) (MPa)
2 V-004: F4-F6 25x30 0.045 0.046 Cumple
3 V-005: F2-F1 25x30 0.039 0.039 Cumple
4 V-006: F6-F5 25x30 0.043 0.043 Cumple
Armado de pilares
Hormigón: H25
Geometría Armaduras
Barras Estribos Aprov.
Pilar Dimensiones Tramo Estado
Planta
(cm) (m) Cuantía Separación (%)
Esquina Cara X Cara Y Descripción(1)
(%) (cm)
F1 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 8 44.3 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 21.6 Cumple
F2 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 8 44.4 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 21.6 Cumple
F3 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 5 30.4 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 22.9 Cumple
F4 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 5 30.4 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 22.9 Cumple
F5 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 8 44.7 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 22.1 Cumple
F6 Baja 40x40 0.00/1.05 4Ø16 2Ø16 2Ø16 1.01 1eØ10 8 44.7 Cumple
Cimentación - - 4Ø16 2Ø16 2Ø16 1.01 1eØ10 - 22.1 Cumple
MOD-A4-E_Is.00
Notas:
(1)
e = estribo, r = rama
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
- Nota:
Base Cabeza
Dimensión Tramo
Soporte Planta Hipótesis N Mx My Qx Qy T N Mx My Qx Qy T
(cm) (m)
(kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm) (kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm)
F1 Baja 40x40 0.00/1.05 Peso propio 12.0 3.9 -1.6 2.9 -0.1 0.0 7.9 0.8 -1.6 2.9 -0.1 0.0
Cargas muertas 31.6 2.2 -6.9 -3.7 -4.8 0.0 31.6 6.0 -1.8 -3.7 -4.8 0.0
Sobrecarga de uso 5.4 1.3 -0.9 0.4 -0.3 0.0 5.4 0.8 -0.6 0.4 -0.3 0.0
V (0º) -0.4 0.6 0.2 1.0 0.2 0.0 -0.4 -0.4 0.0 1.0 0.2 0.0
V (90º) 0.5 -0.4 0.3 -0.6 0.5 0.1 0.5 0.3 -0.2 -0.6 0.5 0.1
V (180º) 0.4 -0.6 -0.2 -1.0 -0.2 0.0 0.4 0.4 -0.0 -1.0 -0.2 0.0
V (270º) -1.5 -1.4 -2.8 -1.4 -3.8 0.0 -1.5 0.2 1.3 -1.4 -3.8 0.0
N1 0.4 0.1 -0.1 0.0 -0.1 0.0 0.4 0.1 -0.0 0.0 -0.1 0.0
Sismo X 1 -3.8 6.9 3.1 10.1 2.9 -0.0 -3.8 -3.7 0.1 10.1 2.9 -0.0
Sismo X 2 -4.1 5.3 1.5 8.1 0.7 0.0 -4.1 -3.2 0.7 8.1 0.7 0.0
Sismo Y 1 5.3 3.5 8.8 3.3 12.3 0.1 5.3 0.0 -4.1 3.3 12.3 0.1
Sismo Y 2 5.9 6.9 12.3 7.7 17.0 -0.1 5.9 -1.2 -5.5 7.7 17.0 -0.1
F2 Baja 40x40 0.00/1.05 Peso propio 12.0 3.9 1.6 2.9 0.1 0.0 7.9 0.8 1.6 2.9 0.1 0.0
Cargas muertas 31.6 2.2 6.9 -3.7 4.8 0.0 31.6 6.0 1.8 -3.7 4.8 0.0
Sobrecarga de uso 5.4 1.3 0.9 0.5 0.3 0.0 5.4 0.8 0.6 0.5 0.3 0.0
V (0º) -0.4 0.6 -0.2 1.0 -0.2 0.0 -0.4 -0.4 -0.0 1.0 -0.2 0.0
V (90º) -0.5 0.4 0.3 0.6 0.5 0.1 -0.5 -0.3 -0.2 0.6 0.5 0.1
V (180º) 0.4 -0.6 0.2 -1.0 0.2 0.0 0.4 0.4 0.0 -1.0 0.2 0.0
V (270º) 1.5 1.4 -2.8 1.4 -3.8 0.0 1.5 -0.2 1.3 1.4 -3.8 0.0
N1 0.4 0.1 0.1 0.0 0.1 0.0 0.4 0.1 0.0 0.0 0.1 0.0
Sismo X 1 -4.1 5.3 -1.5 8.1 -0.7 -0.0 -4.1 -3.2 -0.7 8.1 -0.7 -0.0
Sismo X 2 -3.8 6.9 -3.1 10.1 -2.9 0.0 -3.8 -3.7 -0.1 10.1 -2.9 0.0
Sismo Y 1 -5.3 -3.5 8.8 -3.3 12.3 0.1 -5.3 -0.0 -4.1 -3.3 12.3 0.1
Sismo Y 2 -5.9 -6.9 12.3 -7.7 17.0 -0.1 -5.9 1.2 -5.5 -7.7 17.0 -0.1
F3 Baja 40x40 0.00/1.05 Peso propio 19.0 0.0 -2.1 0.0 -1.1 0.0 14.8 0.0 -1.0 0.0 -1.1 0.0
Cargas muertas 63.8 -0.7 -8.2 -0.7 -10.9 0.0 63.8 0.0 -0.9 -0.7 -3.0 0.0
Sobrecarga de uso 11.4 0.0 -1.3 0.0 -0.8 0.0 11.4 0.0 -0.5 0.0 -0.8 0.0
V (0º) 0.0 1.6 0.0 2.1 0.0 0.0 0.0 -0.6 0.0 2.1 0.0 0.0
V (90º) 0.5 -1.7 1.6 -2.3 1.2 0.1 0.5 0.7 0.3 -2.3 1.2 0.1
V (180º) 0.0 -1.6 0.0 -2.1 0.0 0.0 0.0 0.6 0.0 -2.1 0.0 0.0
V (270º) -0.9 0.0 -3.2 0.0 -2.4 0.0 -0.9 0.0 -0.7 0.0 -2.4 0.0
N1 1.0 0.0 -0.1 0.0 -0.1 0.0 1.0 0.0 -0.0 0.0 -0.1 0.0
Sismo X 1 0.0 16.9 0.0 21.9 0.0 -0.0 0.0 -6.1 0.0 21.9 0.0 -0.0
Sismo X 2 0.0 14.4 0.0 18.5 0.0 0.0 0.0 -5.0 0.0 18.5 0.0 0.0
Sismo Y 1 3.4 -2.7 12.1 -3.7 9.1 0.1 3.4 1.2 2.5 -3.7 9.1 0.1
MOD-A4-E_Is.00
Sismo Y 2 3.4 2.7 12.1 3.7 9.1 -0.1 3.4 -1.2 2.5 3.7 9.1 -0.1
F4 Baja 40x40 0.00/1.05 Peso propio 19.0 0.0 2.1 0.0 1.1 0.0 14.8 0.0 1.0 0.0 1.1 0.0
Cargas muertas 63.8 -0.7 8.2 -0.7 10.9 0.0 63.8 0.0 0.9 -0.7 3.0 0.0
Sobrecarga de uso 11.4 0.0 1.3 0.0 0.8 0.0 11.4 0.0 0.5 0.0 0.8 0.0
V (0º) 0.0 1.6 0.0 2.1 0.0 0.0 0.0 -0.6 0.0 2.1 0.0 0.0
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Base Cabeza
Dimensión Tramo
Soporte Planta Hipótesis N Mx My Qx Qy T N Mx My Qx Qy T
(cm) (m)
(kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm) (kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm)
V (90º) -0.5 1.7 1.6 2.3 1.2 0.1 -0.5 -0.7 0.3 2.3 1.2 0.1
V (180º) 0.0 -1.6 0.0 -2.1 0.0 0.0 0.0 0.6 0.0 -2.1 0.0 0.0
V (270º) 0.9 -0.0 -3.2 -0.0 -2.4 0.0 0.9 0.0 -0.7 -0.0 -2.4 0.0
N1 1.0 0.0 0.1 0.0 0.1 0.0 1.0 0.0 0.0 0.0 0.1 0.0
Sismo X 1 0.0 14.4 0.0 18.5 0.0 -0.0 0.0 -5.0 0.0 18.5 0.0 -0.0
Sismo X 2 0.0 16.9 0.0 21.9 0.0 0.0 0.0 -6.1 0.0 21.9 0.0 0.0
Sismo Y 1 -3.4 2.7 12.1 3.7 9.1 0.1 -3.4 -1.2 2.5 3.7 9.1 0.1
Sismo Y 2 -3.4 -2.7 12.1 -3.7 9.1 -0.1 -3.4 1.2 2.5 -3.7 9.1 -0.1
F5 Baja 40x40 0.00/1.05 Peso propio 12.0 -3.9 -1.6 -2.9 -0.1 0.0 7.9 -0.8 -1.6 -2.9 -0.1 0.0
Cargas muertas 31.6 -1.2 -7.0 4.4 -4.9 0.0 31.6 -5.8 -1.9 4.4 -4.9 0.0
Sobrecarga de uso 5.4 -1.3 -0.9 -0.4 -0.3 0.0 5.4 -0.8 -0.6 -0.4 -0.3 0.0
V (0º) 0.4 0.6 -0.2 1.0 -0.2 0.0 0.4 -0.4 -0.0 1.0 -0.2 0.0
V (90º) 0.9 -1.7 2.5 -2.1 3.3 0.1 0.9 0.4 -1.1 -2.1 3.3 0.1
V (180º) -0.4 -0.6 0.2 -1.0 0.2 0.0 -0.4 0.4 0.0 -1.0 0.2 0.0
V (270º) -1.5 1.4 -2.8 1.4 -3.8 0.0 -1.5 -0.2 1.3 1.4 -3.8 0.0
N1 0.4 -0.1 -0.1 -0.0 -0.1 0.0 0.4 -0.1 -0.0 -0.0 -0.1 0.0
Sismo X 1 3.8 6.9 -3.1 10.1 -2.9 -0.0 3.8 -3.7 -0.1 10.1 -2.9 -0.0
Sismo X 2 4.1 5.3 -1.5 8.1 -0.7 0.0 4.1 -3.2 -0.7 8.1 -0.7 0.0
Sismo Y 1 5.9 -6.9 12.3 -7.7 17.0 0.1 5.9 1.2 -5.5 -7.7 17.0 0.1
Sismo Y 2 5.3 -3.5 8.8 -3.3 12.3 -0.1 5.3 -0.0 -4.1 -3.3 12.3 -0.1
F6 Baja 40x40 0.00/1.05 Peso propio 12.0 -3.9 1.6 -2.9 0.1 0.0 7.9 -0.8 1.6 -2.9 0.1 0.0
Cargas muertas 31.5 -1.2 7.0 4.4 4.9 0.0 31.5 -5.8 1.8 4.4 4.9 0.0
Sobrecarga de uso 5.4 -1.3 0.9 -0.4 0.3 0.0 5.4 -0.8 0.6 -0.4 0.3 0.0
V (0º) 0.4 0.6 0.2 1.0 0.2 0.0 0.4 -0.4 0.0 1.0 0.2 0.0
V (90º) -0.9 1.7 2.5 2.1 3.3 0.1 -0.9 -0.4 -1.1 2.1 3.3 0.1
V (180º) -0.4 -0.6 -0.2 -1.0 -0.2 0.0 -0.4 0.4 -0.0 -1.0 -0.2 0.0
V (270º) 1.5 -1.4 -2.8 -1.4 -3.8 0.0 1.5 0.2 1.3 -1.4 -3.8 0.0
N1 0.4 -0.1 0.1 -0.0 0.1 0.0 0.4 -0.1 0.0 -0.0 0.1 0.0
Sismo X 1 4.1 5.3 1.5 8.1 0.7 -0.0 4.1 -3.2 0.7 8.1 0.7 -0.0
Sismo X 2 3.8 6.9 3.1 10.1 2.9 0.0 3.8 -3.7 0.1 10.1 2.9 0.0
Sismo Y 1 -5.9 6.9 12.3 7.7 17.0 0.1 -5.9 -1.2 -5.5 7.7 17.0 0.1
Sismo Y 2 -5.3 3.5 8.8 3.3 12.3 -0.1 -5.3 0.0 -4.1 3.3 12.3 -0.1
Esfuerzos en arranques
Soporte Hipótesis N Mx My Qx Qy T
(kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm)
F1 Peso propio 12.0 3.9 -1.6 2.9 -0.1 0.0
Cargas muertas 31.6 2.2 -6.9 -3.7 -4.8 0.0
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Esfuerzos en arranques
Soporte Hipótesis N Mx My Qx Qy T
(kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm)
V (270º) -1.5 -1.4 -2.8 -1.4 -3.8 0.0
N1 0.4 0.1 -0.1 0.0 -0.1 0.0
Sismo X 1 -3.8 6.9 3.1 10.1 2.9 -0.0
Sismo X 2 -4.1 5.3 1.5 8.1 0.7 0.0
Sismo Y 1 5.3 3.5 8.8 3.3 12.3 0.1
Sismo Y 2 5.9 6.9 12.3 7.7 17.0 -0.1
F2 Peso propio 12.0 3.9 1.6 2.9 0.1 0.0
Cargas muertas 31.6 2.2 6.9 -3.7 4.8 0.0
Sobrecarga de uso 5.4 1.3 0.9 0.5 0.3 0.0
V (0º) -0.4 0.6 -0.2 1.0 -0.2 0.0
V (90º) -0.5 0.4 0.3 0.6 0.5 0.1
V (180º) 0.4 -0.6 0.2 -1.0 0.2 0.0
V (270º) 1.5 1.4 -2.8 1.4 -3.8 0.0
N1 0.4 0.1 0.1 0.0 0.1 0.0
Sismo X 1 -4.1 5.3 -1.5 8.1 -0.7 -0.0
Sismo X 2 -3.8 6.9 -3.1 10.1 -2.9 0.0
Sismo Y 1 -5.3 -3.5 8.8 -3.3 12.3 0.1
Sismo Y 2 -5.9 -6.9 12.3 -7.7 17.0 -0.1
F3 Peso propio 19.0 0.0 -2.1 0.0 -1.1 0.0
Cargas muertas 63.8 -0.7 -8.2 -0.7 -10.9 0.0
Sobrecarga de uso 11.4 0.0 -1.3 0.0 -0.8 0.0
V (0º) 0.0 1.6 0.0 2.1 0.0 0.0
V (90º) 0.5 -1.7 1.6 -2.3 1.2 0.1
V (180º) 0.0 -1.6 0.0 -2.1 0.0 0.0
V (270º) -0.9 0.0 -3.2 0.0 -2.4 0.0
N1 1.0 0.0 -0.1 0.0 -0.1 0.0
Sismo X 1 0.0 16.9 0.0 21.9 0.0 -0.0
Sismo X 2 0.0 14.4 0.0 18.5 0.0 0.0
Sismo Y 1 3.4 -2.7 12.1 -3.7 9.1 0.1
Sismo Y 2 3.4 2.7 12.1 3.7 9.1 -0.1
F4 Peso propio 19.0 0.0 2.1 0.0 1.1 0.0
Cargas muertas 63.8 -0.7 8.2 -0.7 10.9 0.0
Sobrecarga de uso 11.4 0.0 1.3 0.0 0.8 0.0
V (0º) 0.0 1.6 0.0 2.1 0.0 0.0
V (90º) -0.5 1.7 1.6 2.3 1.2 0.1
V (180º) 0.0 -1.6 0.0 -2.1 0.0 0.0
V (270º) 0.9 -0.0 -3.2 -0.0 -2.4 0.0
N1 1.0 0.0 0.1 0.0 0.1 0.0
Sismo X 1 0.0 14.4 0.0 18.5 0.0 -0.0
Sismo X 2 0.0 16.9 0.0 21.9 0.0 0.0
Sismo Y 1 -3.4 2.7 12.1 3.7 9.1 0.1
Sismo Y 2 -3.4 -2.7 12.1 -3.7 9.1 -0.1
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Esfuerzos en arranques
Soporte Hipótesis N Mx My Qx Qy T
(kN) (kNꞏm) (kNꞏm) (kN) (kN) (kNꞏm)
V (90º) 0.9 -1.7 2.5 -2.1 3.3 0.1
V (180º) -0.4 -0.6 0.2 -1.0 0.2 0.0
V (270º) -1.5 1.4 -2.8 1.4 -3.8 0.0
N1 0.4 -0.1 -0.1 -0.0 -0.1 0.0
Sismo X 1 3.8 6.9 -3.1 10.1 -2.9 -0.0
Sismo X 2 4.1 5.3 -1.5 8.1 -0.7 0.0
Sismo Y 1 5.9 -6.9 12.3 -7.7 17.0 0.1
Sismo Y 2 5.3 -3.5 8.8 -3.3 12.3 -0.1
F6 Peso propio 12.0 -3.9 1.6 -2.9 0.1 0.0
Cargas muertas 31.5 -1.2 7.0 4.4 4.9 0.0
Sobrecarga de uso 5.4 -1.3 0.9 -0.4 0.3 0.0
V (0º) 0.4 0.6 0.2 1.0 0.2 0.0
V (90º) -0.9 1.7 2.5 2.1 3.3 0.1
V (180º) -0.4 -0.6 -0.2 -1.0 -0.2 0.0
V (270º) 1.5 -1.4 -2.8 -1.4 -3.8 0.0
N1 0.4 -0.1 0.1 -0.0 0.1 0.0
Sismo X 1 4.1 5.3 1.5 8.1 0.7 -0.0
Sismo X 2 3.8 6.9 3.1 10.1 2.9 0.0
Sismo Y 1 -5.9 6.9 12.3 7.7 17.0 0.1
Sismo Y 2 -5.3 3.5 8.8 3.3 12.3 -0.1
En las tablas de comprobación de pilares de acero no se muestran las comprobaciones con coeficiente
de aprovechamiento inferior al 10%.
Disp.: Disposiciones relativas a las armaduras
Arm.: Armadura mínima y máxima
Q: Estado límite de agotamiento frente a cortante
N,M: Estado límite de agotamiento frente a solicitaciones normales
Sism.: Criterios de diseño por sismo
Cap.: Diseño por capacidad
12.13.4.2 PILARES
F1
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
G, N, S(6) N,M S. 44.2 -27.5 -2.4 -11.7 -29.6
G, Q, N, S(3) Q S. 46.9 -28.0 -1.7 -11.5 -29.8
Pie Cumple Cumple 17.7 21.6 Cumple Cumple 21.6 Cumple
G, N, S(6) N,M S. 44.2 -27.5 -2.4 -11.7 -29.6
Cimentación 40x40 Arranque N.P.(1) N.P.(1) N.P.(2) 21.6 N.P.(1) Cumple 21.6 G, N, S(6) N,M S. 44.2 -27.5 -2.4 -11.7 -29.6 Cumple
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSY2
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1+1.4ꞏSY2
(5)
0.9ꞏPP+0.9ꞏCM-1.4ꞏSY2
(6)
1.2ꞏPP+1.2ꞏCM+0.2ꞏN1-1.4ꞏSY2
F2
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
G, Q, N, S(3) Q S. 42.0 -3.3 10.3 -11.4 29.8
Cabeza Cumple Cumple 17.7 11.7 Cumple Cumple 17.7 Cumple
G, Q, N, S(4) N,M S. 58.5 12.1 7.0 10.1 -17.8
G, S(5) Q S. 27.4 -4.6 7.8 -11.4 28.2
0.525 m Cumple Cumple 40.0 11.7 Cumple Cumple 40.0 Cumple
G, Q, N, S(4) N,M S. 58.5 12.1 7.0 10.1 -17.8
Baja (0 - 1.35 m) 40x40 (3)
G, Q, N, S Q S. 46.9 28.0 -1.7 -11.4 29.8
0.525 m Cumple Cumple 44.4 21.6 Cumple Cumple 44.4 Cumple
G, N, S(6) N,M S. 44.3 27.5 -2.4 -11.7 29.6
G, Q, N, S(3) Q S. 46.9 28.0 -1.7 -11.4 29.8
Pie Cumple Cumple 17.7 21.6 Cumple Cumple 21.6 Cumple
G, N, S(6) N,M S. 44.3 27.5 -2.4 -11.7 29.6
(1) (1) (2) (1) (6)
Cimentación 40x40 Arranque N.P. N.P. N.P. 21.6 N.P. Cumple 21.6 G, N, S N,M S. 44.3 27.5 -2.4 -11.7 29.6 Cumple
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1+1.4ꞏSY2
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSY2
(5)
0.9ꞏPP+0.9ꞏCM+1.4ꞏSY2
(6)
1.2ꞏPP+1.2ꞏCM+0.2ꞏN1+1.4ꞏSY2
F3
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
Cabeza Cumple Cumple 12.1 8.5 Cumple Cumple 12.1 G, Q, N, S(3) Q S.,N,M S. 100.3 -2.6 8.6 -31.5 -5.4 Cumple
0.525 m Cumple Cumple 30.4 13.1 Cumple Cumple 30.4 G, Q, N, S(4) Q S.,N,M S. 97.9 -16.8 -1.5 -6.0 -22.8 Cumple
Baja (0 - 1.35 m) 40x40
G, Q, V, N(5) Q 104.1 -18.2 -0.8 -0.8 -18.7
Pie Cumple Cumple 24.6 22.9 Cumple Cumple 24.6 Cumple
G, Q, N, S(3) N,M S. 105.2 -13.1 -24.5 -31.5 -14.8
(1) (1) (2) (1) (3)
Cimentación 40x40 Arranque N.P. N.P. N.P. 22.9 N.P. Cumple 22.9 G, Q, N, S N,M S. 105.2 -13.1 -24.5 -31.5 -14.8 Cumple
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSX1
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSY2
(5)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+1.6ꞏV(270º)+0.5ꞏN1
F4
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSX2
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1+1.4ꞏSY2
(5)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+1.6ꞏV(90º)+0.5ꞏN1
F5
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
G, Q, N, S(3) Q S. 41.9 3.3 -10.0 12.3 -29.9
Cabeza Cumple Cumple 17.9 11.6 Cumple Cumple 17.9 Cumple
G, Q, N, S(4) N,M S. 58.4 -12.1 -6.7 -9.2 17.7
G, S(5) Q S. 27.3 4.6 -7.6 12.1 -28.2
0.525 m Cumple Cumple 40.4 11.6 Cumple Cumple 40.4 Cumple
G, Q, N, S(4) N,M S. 58.4 -12.1 -6.7 -9.2 17.7
Baja (0 - 1.35 m) 40x40 (3)
G, Q, N, S Q S. 46.9 -28.1 2.9 12.3 -29.9
0.525 m Cumple Cumple 44.7 22.1 Cumple Cumple 44.7 Cumple
G, N, S(6) N,M S. 44.2 -27.6 3.5 12.5 -29.7
G, Q, N, S(3) Q S. 46.9 -28.1 2.9 12.3 -29.9
Pie Cumple Cumple 17.9 22.1 Cumple Cumple 22.1 Cumple
G, N, S(6) N,M S. 44.2 -27.6 3.5 12.5 -29.7
Cimentación 40x40 Arranque N.P.(1) N.P.(1) N.P.(2) 22.1 N.P.(1) Cumple 22.1 G, N, S(6) N,M S. 44.2 -27.6 3.5 12.5 -29.7 Cumple
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSY1
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1+1.4ꞏSY1
(5)
0.9ꞏPP+0.9ꞏCM-1.4ꞏSY1
(6)
1.2ꞏPP+1.2ꞏCM+0.2ꞏN1-1.4ꞏSY1
F6
Sección de hormigón
Comprobaciones Esfuerzos pésimos
Dimensión
Tramo Posición Q N,M Aprov. N Mxx Myy Qx Qy Estado
(cm) Disp. Arm. Sism. Cap. Naturaleza Comp.
(%) (%) (%) (kN) (kNꞏm) (kNꞏm) (kN) (kN)
G, Q, N, S(3) Q S. 41.9 -3.3 -10.0 12.3 29.9
Cabeza Cumple Cumple 17.9 11.6 Cumple Cumple 17.9 Cumple
G, Q, N, S(4) N,M S. 58.3 12.1 -6.7 -9.3 -17.6
G, S(5) Q S. 27.3 -4.6 -7.6 12.1 28.3
0.525 m Cumple Cumple 40.4 11.6 Cumple Cumple 40.4 Cumple
G, Q, N, S(4) N,M S. 58.3 12.1 -6.7 -9.3 -17.6
Baja (0 - 1.35 m) 40x40
G, Q, N, S(3) Q S. 46.8 28.1 2.9 12.3 29.9
0.525 m Cumple Cumple 44.7 22.1 Cumple Cumple 44.7 Cumple
G, N, S(6) N,M S. 44.1 27.7 3.5 12.5 29.8
(3)
G, Q, N, S Q S. 46.8 28.1 2.9 12.3 29.9
Pie Cumple Cumple 17.9 22.1 Cumple Cumple 22.1 Cumple
G, N, S(6) N,M S. 44.1 27.7 3.5 12.5 29.8
Cimentación 40x40 Arranque N.P.(1) N.P.(1) N.P.(2) 22.1 N.P.(1) Cumple 22.1 G, N, S(6) N,M S. 44.1 27.7 3.5 12.5 29.8 Cumple
Notas:
(1)
La comprobación no procede
(2)
La comprobación no procede, ya que no hay esfuerzo cortante.
(3)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1+1.4ꞏSY1
(4)
1.2ꞏPP+1.2ꞏCM+0.5ꞏQa+0.2ꞏN1-1.4ꞏSY1
(5)
0.9ꞏPP+0.9ꞏCM+1.4ꞏSY1
(6)
1.2ꞏPP+1.2ꞏCM+0.2ꞏN1+1.4ꞏSY1
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
12.13.5.1 RESUMIDO
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Situaciones sísmicas
Cota Desp. X Desp. Y Desp. Z
Pilar Planta
(m) (mm) (mm) (mm)
F1 Baja 1.20 1.06 3.15 -11.58
Cimentación 0.00 0.00 0.00 -11.57
F2 Baja 1.20 1.06 3.15 -11.57
Cimentación 0.00 0.00 0.00 -11.56
F3 Baja 1.20 1.06 3.08 -12.03
Cimentación 0.00 0.00 0.00 -12.01
F4 Baja 1.20 1.06 3.08 -12.02
Cimentación 0.00 0.00 0.00 -12.00
F5 Baja 1.20 1.06 3.15 -12.58
Cimentación 0.00 0.00 0.00 -12.57
F6 Baja 1.20 1.06 3.15 -12.57
Cimentación 0.00 0.00 0.00 -12.57
F2
Perímetro crítico: 1050 mm
Canto útil de la losa: 25 cm
Tipo Comprobación Resultado Estado
Elementos sin refuerzo para cortante
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
F3
Perímetro crítico: 1700 mm
Canto útil de la losa: 25 cm
Tipo Comprobación Resultado Estado
Elementos sin refuerzo para cortante
Perímetro crítico 0.32 MPa 1.10 MPa Cumple
(Combinaciones persistentes)
Elementos sin refuerzo para cortante
Perímetro crítico 0.47 MPa 0.88 MPa Cumple
(Combinaciones sísmicas y accidentales)
F4
Perímetro crítico: 1700 mm
Canto útil de la losa: 25 cm
Tipo Comprobación Resultado Estado
Elementos sin refuerzo para cortante
Perímetro crítico 0.33 MPa 1.10 MPa Cumple
(Combinaciones persistentes)
Elementos sin refuerzo para cortante
Perímetro crítico 0.47 MPa 0.88 MPa Cumple
(Combinaciones sísmicas y accidentales)
F5
Perímetro crítico: 1050 mm
Canto útil de la losa: 25 cm
Tipo Comprobación Resultado Estado
Elementos sin refuerzo para cortante
Perímetro crítico 0.33 MPa 1.10 MPa Cumple
(Combinaciones persistentes)
Elementos sin refuerzo para cortante
Perímetro crítico 0.63 MPa 0.88 MPa Cumple
(Combinaciones sísmicas y accidentales)
F6
Perímetro crítico: 1050 mm
Canto útil de la losa: 25 cm
Tipo Comprobación Resultado Estado
Elementos sin refuerzo para cortante
Perímetro crítico 0.33 MPa 1.10 MPa Cumple
MOD-A4-E_Is.00
(Combinaciones persistentes)
Elementos sin refuerzo para cortante
Perímetro crítico 0.63 MPa 0.88 MPa Cumple
(Combinaciones sísmicas y accidentales)
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Comprobaciones de flecha
Activa
(Característica)
Vigas Estado
fA,max fA,lim
fA,lim= L/480
fA,max: 0.12 mm
V-101: F1 - F3 CUMPLE
fA,lim: 5.44 mm
f : 0.12 mm
V-102: F3 - F5 A,max CUMPLE
fA,lim: 5.44 mm
f : 0.12 mm
V-103: F2 - F4 A,max CUMPLE
fA,lim: 5.44 mm
f : 0.12 mm
V-104: F4 - F6 A,max CUMPLE
fA,lim: 5.44 mm
f : 0.09 mm
V-105: F2 - F1 A,max CUMPLE
fA,lim: 4.49 mm
f : 0.09 mm
V-106: F6 - F5 A,max CUMPLE
fA,lim: 4.49 mm
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
2.2. Pórtico 2
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
2.3. Pórtico 3
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
2.4. Pórtico 4
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
13.2.1 VIENTO
Se ha tenido en cuenta la acción del viento mediante cargas aplicadas en las siguientes hipótesis: 'V
(0º)', 'V (90º)', 'V (180º)' y 'V (270º)'.
13.2.2 SISMO
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
j 1
Gj Gkj PPk QiQki
i1
- Donde:
Gk Acción permanente
Pk Acción de pretensado
Qk Acción variable
G Coeficiente parcial de seguridad de las acciones permanentes
P Coeficiente parcial de seguridad de la acción de pretensado
Q,1 Coeficiente parcial de seguridad de la acción variable principal
Q,i Coeficiente parcial de seguridad de las acciones variables de acompañamiento
Para cada situación de proyecto y estado límite los coeficientes a utilizar serán:
E.L.U. de rotura. Hormigón: NCh430.Of2008, Dº60:2011
E.L.U. de rotura. Hormigón en cimentaciones: NCh430.Of2008, Dº60:2011
(9-1)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.400 1.400
Sobrecarga (Q)
Viento (Q)
Nieve (Q)
(9-2 Lr)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 1.600
Viento (Q)
MOD-A4-E_Is.00
Nieve (Q)
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
(9-2 S)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 1.600
Viento (Q)
Nieve (Q) 0.000 0.500
(9-3 Lr, L)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q)
Nieve (Q)
(9-3 S, L)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q)
Nieve (Q) 1.600 1.600
(9-3 Lr, W)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q)
Viento (Q) 0.000 0.800
Nieve (Q)
(9-3 S, W)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q)
Viento (Q) 0.000 0.800
Nieve (Q) 1.600 1.600
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
(9-4 Lr)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q) 1.600 1.600
Nieve (Q)
(9-4 S)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 1.200 1.200
Sobrecarga (Q) 0.000 0.500
Viento (Q) 1.600 1.600
Nieve (Q) 0.000 0.500
(9-6)
Coeficientes parciales de seguridad ()
Favorable Desfavorable
Carga permanente (G) 0.900 0.900
Sobrecarga (Q)
Viento (Q) 0.000 1.600
Nieve (Q)
Desplazamientos
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
13.4.2 COMBINACIONES
- Nombres de las hipótesis
PP Peso propio
CM Cargas muertas
Qa Sobrecarga de uso
V (0º) V (0º)
V (90º) V (90º)
V (180º) V (180º)
V (270º) V (270º)
N1 N1
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Losas cimentación Canto (cm) Módulo balasto (kN/m³) Tensión admisible Tensión admisible
en situaciones en situaciones
persistentes (MPa) accidentales (MPa)
Todas 20 4078.60 0.067 0.089
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
fyk
Elemento Acero s
(MPa)
Todos A-63-42H 412 1.00
Coord. X y Coord. Y son coordenadas generales. Los esfuerzos están referidos a los ejes locales de
la malla correspondiente.
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
0.250 1.950 Máx. 4.6452 0.8581 0.0278 0.3071 0.4233 0.450 1.950 Máx. 3.7508 0.8581 0.3203 0.3071 0.4471
Mín. -0.8946 -1.4568 -0.0661 -0.5985 -2.2938 Mín. -0.9530 -1.4568 -1.5731 -0.5985 -2.0739
Dif. 5.5398 2.3149 0.0939 0.9056 2.7171 Dif. 4.7038 2.3149 1.8934 0.9056 2.5210
0.450 0.250 Máx. 3.7741 1.3385 0.3203 0.0289 2.0863 0.450 2.150 Máx. 3.7508 0.8436 0.3203 0.0289 0.3821
Mín. -0.9530 -0.8436 -1.5723 -0.0594 -0.3648 Mín. -0.9530 -1.3385 -1.5731 -0.0618 -2.0541
Dif. 4.7271 2.1821 1.8926 0.0883 2.4511 Dif. 4.7038 2.1821 1.8934 0.0906 2.4361
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
0.700 0.250 Máx. 2.4527 0.7340 0.5706 0.0326 1.5607 1.200 1.950 Máx. 1.0837 0.9858 0.8840 0.3581 0.2646
Mín. -0.8857 -0.9300 -2.2663 -0.1115 -0.3392 Mín. -0.4387 -0.6134 -2.9646 -0.2429 -0.7126
Dif. 3.3384 1.6640 2.8369 0.1441 1.8999 Dif. 1.5223 1.5992 3.8486 0.6010 0.9772
0.700 0.450 Máx. 2.4527 0.9306 0.5706 0.3345 1.6492 1.200 2.150 Máx. 1.0837 0.9882 0.8840 0.0481 0.2260
Mín. -0.8857 -0.9320 -2.2663 -0.3990 -0.4060 Mín. -0.4387 -0.3812 -2.9646 -0.0965 -0.6643
Dif. 3.3384 1.8627 2.8369 0.7335 2.0552 Dif. 1.5223 1.3693 3.8486 0.1446 0.8903
0.700 0.700 Máx. 1.5702 1.2389 0.5943 0.5614 1.5078 1.450 0.250 Máx. 1.1131 0.3522 0.9611 0.0519 0.3577
Mín. -0.9340 -0.7433 -1.6830 -0.7422 -0.5374 Mín. -0.7843 -0.9979 -3.1725 -0.0880 -0.1076
Dif. 2.5043 1.9822 2.2773 1.3036 2.0452 Dif. 1.8974 1.3502 4.1336 0.1399 0.4654
0.700 0.950 Máx. 1.0989 1.3293 0.6071 0.6899 1.2540 1.450 0.450 Máx. 1.1131 0.5947 0.9611 0.3627 0.3844
Mín. -0.9541 -0.9261 -1.2640 -0.9940 -0.7206 Mín. -0.7843 -0.9956 -3.1725 -0.1915 -0.1243
Dif. 2.0530 2.2554 1.8712 1.6840 1.9746 Dif. 1.8974 1.5903 4.1336 0.5541 0.5086
0.700 1.200 Máx. 0.8087 1.1748 0.6112 0.7327 0.9855 1.450 0.700 Máx. 1.1321 1.0493 0.9780 0.6086 0.3672
Mín. -0.9602 -1.1455 -0.9825 -1.0807 -0.9498 Mín. -0.8834 -1.3590 -2.6882 -0.3260 -0.1509
Dif. 1.7690 2.3203 1.5937 1.8133 1.9353 Dif. 2.0155 2.4082 3.6662 0.9346 0.5180
0.700 1.450 Máx. 1.0435 0.9470 0.6071 0.6899 0.7509 1.450 0.950 Máx. 1.1200 1.3642 0.9893 0.7473 0.3243
Mín. -0.9541 -1.2968 -1.2383 -0.9940 -1.2139 Mín. -0.9001 -1.4966 -2.2510 -0.3458 -0.1850
Dif. 1.9976 2.2438 1.8455 1.6840 1.9648 Dif. 2.0201 2.8608 3.2403 1.0931 0.5093
0.700 1.700 Máx. 1.5194 0.7433 0.5943 0.5614 0.5625 1.450 1.200 Máx. 1.1075 1.4686 0.9932 0.7932 0.2707
Mín. -0.9340 -1.2090 -1.6661 -0.7616 -1.4649 Mín. -0.9035 -1.4531 -1.8781 -0.3296 -0.2236
Dif. 2.4534 1.9523 2.2604 1.3230 2.0274 Dif. 2.0111 2.9218 2.8713 1.1228 0.4943
0.700 1.950 Máx. 2.3967 0.9320 0.5706 0.3345 0.4267 1.450 1.450 Máx. 1.0999 1.4955 0.9893 0.7473 0.2181
Mín. -0.8857 -0.9091 -2.2609 -0.4104 -1.6060 Mín. -0.9001 -1.3326 -2.1451 -0.4004 -0.2621
Dif. 3.2824 1.8411 2.8315 0.7449 2.0327 Dif. 2.0000 2.8282 3.1343 1.1477 0.4801
0.700 2.150 Máx. 2.3967 0.9300 0.5706 0.0324 0.3570 1.450 1.700 Máx. 1.0930 1.3440 0.9780 0.6086 0.1730
Mín. -0.8857 -0.7180 -2.2609 -0.1144 -1.5212 Mín. -0.8834 -1.0062 -2.5950 -0.3688 -0.2916
Dif. 3.2824 1.6480 2.8315 0.1468 1.8781 Dif. 1.9764 2.3502 3.5730 0.9774 0.4646
0.950 0.250 Máx. 1.6805 0.5361 0.7543 0.0406 1.1212 1.450 1.950 Máx. 1.0416 0.9956 0.9611 0.3627 0.1732
Mín. -0.6454 -0.9687 -2.7165 -0.1010 -0.2898 Mín. -0.7843 -0.5497 -3.0990 -0.2143 -0.3019
Dif. 2.3259 1.5048 3.4708 0.1416 1.4110 Dif. 1.8259 1.5452 4.0601 0.5769 0.4750
0.950 0.450 Máx. 1.6805 0.7592 0.7543 0.3496 1.1979 1.450 2.150 Máx. 1.0416 0.9979 0.9611 0.0529 0.1652
Mín. -0.6454 -0.9669 -2.7165 -0.2909 -0.3427 Mín. -0.7843 -0.3093 -3.0990 -0.0926 -0.2799
Dif. 2.3259 1.7261 3.4708 0.6405 1.5407 Dif. 1.8259 1.3073 4.0601 0.1455 0.4452
0.950 0.700 Máx. 1.1451 1.1470 0.7760 0.5850 1.1234 1.700 0.250 Máx. 0.9812 0.3407 0.9866 0.0530 0.1804
Mín. -0.6764 -1.0773 -2.1814 -0.5231 -0.4409 Mín. -0.9947 -1.0010 -3.2261 -0.0866 -0.1770
Dif. 1.8216 2.2243 2.9574 1.1082 1.5643 Dif. 1.9759 1.3417 4.2127 0.1396 0.3574
0.950 0.950 Máx. 0.9884 1.3546 0.7891 0.7176 0.9645 1.700 0.450 Máx. 0.9812 0.5850 0.9866 0.3641 0.1872
Mín. -0.6894 -1.2499 -1.7366 -0.6325 -0.5758 Mín. -0.9947 -0.9986 -3.2261 -0.1805 -0.1822
Dif. 1.6778 2.6045 2.5258 1.3501 1.5403 Dif. 1.9759 1.5836 4.2127 0.5446 0.3694
0.950 1.200 Máx. 0.9813 1.3401 0.7935 0.7615 0.7797 1.700 0.700 Máx. 1.0321 1.0445 1.0029 0.6113 0.1483
Mín. -0.6935 -1.3128 -1.3961 -0.6925 -0.7398 Mín. -1.0471 -1.3862 -2.7477 -0.3042 -0.1383
Dif. 1.6749 2.6529 2.1897 1.4540 1.5195 Dif. 2.0792 2.4307 3.7506 0.9155 0.2866
0.950 1.450 Máx. 0.9869 1.2683 0.7891 0.7176 0.6084 1.700 0.950 Máx. 1.0275 1.3651 1.0138 0.7509 0.0810
Mín. -0.6894 -1.3217 -1.6903 -0.6419 -0.9176 Mín. -1.0475 -1.5212 -2.3129 -0.3158 -0.0625
Dif. 1.6762 2.5900 2.4794 1.3595 1.5260 Dif. 2.0750 2.8863 3.3267 1.0667 0.1435
0.950 1.700 Máx. 1.0740 1.0848 0.7760 0.5850 0.4668 1.700 1.200 Máx. 1.0136 1.4724 1.0176 0.7970 0.0459
Mín. -0.6764 -1.1131 -2.1466 -0.5470 -1.0712 Mín. -1.0455 -1.4684 -1.9381 -0.3184 -0.0000
Dif. 1.7504 2.1979 2.9225 1.1320 1.5380 Dif. 2.0591 2.9408 2.9557 1.1155 0.0459
0.950 1.950 Máx. 1.5923 0.9669 0.7543 0.3496 0.3635 1.700 1.450 Máx. 0.9960 1.4980 1.0138 0.7509 0.1259
Mín. -0.6454 -0.7305 -2.6964 -0.3040 -1.1440 Mín. -1.0475 -1.3346 -2.1680 -0.3933 -0.0810
Dif. 2.2377 1.6974 3.4507 0.6535 1.5075 Dif. 2.0435 2.8327 3.1817 1.1442 0.2069
0.950 2.150 Máx. 1.5923 0.9687 0.7543 0.0407 0.3076 1.700 1.700 Máx. 0.9699 1.3429 1.0029 0.6113 0.2069
Mín. -0.6454 -0.5119 -2.6964 -0.1044 -1.0712 Mín. -1.0471 -0.9950 -2.6127 -0.3656 -0.1483
Dif. 2.2377 1.4806 3.4507 0.1451 1.3788 Dif. 2.0170 2.3379 3.6156 0.9769 0.3552
1.200 0.250 Máx. 1.1268 0.4141 0.8840 0.0476 0.7270 1.700 1.950 Máx. 0.8755 0.9986 0.9866 0.3641 0.2541
Mín. -0.4387 -0.9882 -3.0074 -0.0926 -0.2100 Mín. -0.9947 -0.5296 -3.1128 -0.2133 -0.1872
Dif. 1.5655 1.4022 3.8914 0.1402 0.9370 Dif. 1.8702 1.5282 4.0994 0.5774 0.4413
1.200 0.450 Máx. 1.1268 0.6497 0.8840 0.3581 0.7797 1.700 2.150 Máx. 0.8755 1.0010 0.9866 0.0546 0.2444
Mín. -0.4387 -0.9858 -3.0074 -0.2262 -0.2454 Mín. -0.9947 -0.2864 -3.1128 -0.0921 -0.1804
Dif. 1.5655 1.6355 3.8914 0.5843 1.0252 Dif. 1.8702 1.2874 4.0994 0.1467 0.4248
1.200 0.700 Máx. 1.1241 1.0814 0.9029 0.6002 0.7404 1.950 0.250 Máx. 0.7883 0.3753 0.9611 0.0509 0.1151
Mín. -0.6106 -1.2684 -2.5049 -0.3948 -0.3075 Mín. -1.1400 -0.9979 -3.1725 -0.0880 -0.3577
Dif. 1.7347 2.3498 3.4078 0.9949 1.0480 Dif. 1.9283 1.3733 4.1336 0.1389 0.4728
1.200 0.950 Máx. 1.1088 1.3606 0.9152 0.7365 0.6477 1.950 0.450 Máx. 0.7883 0.6171 0.9611 0.3627 0.1358
Mín. -0.6623 -1.4151 -2.0620 -0.4400 -0.3911 Mín. -1.1400 -0.9956 -3.1725 -0.1915 -0.3844
Dif. 1.7712 2.7757 2.9772 1.1765 1.0388 Dif. 1.9283 1.6126 4.1336 0.5541 0.5202
1.200 1.200 Máx. 1.0993 1.4278 0.9194 0.7816 0.5343 1.950 0.700 Máx. 0.8906 1.0661 0.9780 0.6086 0.1762
Mín. -0.6792 -1.4044 -1.6974 -0.4176 -0.4900 Mín. -1.1631 -1.3590 -2.6882 -0.3260 -0.3672
MOD-A4-E_Is.00
Dif. 1.7784 2.8322 2.6168 1.1992 1.0243 Dif. 2.0537 2.4250 3.6662 0.9346 0.5433
1.200 1.450 Máx. 1.0991 1.4273 0.9152 0.7365 0.4251 1.950 0.950 Máx. 0.9052 1.3665 0.9893 0.7473 0.2343
Mín. -0.6623 -1.3277 -1.9890 -0.4793 -0.5929 Mín. -1.1556 -1.4966 -2.2510 -0.3458 -0.3243
Dif. 1.7614 2.7550 2.9041 1.2158 1.0181 Dif. 2.0608 2.8631 3.2403 1.0931 0.5585
1.200 1.700 Máx. 1.1047 1.2690 0.9029 0.6002 0.3329 1.950 1.200 Máx. 0.8966 1.4462 0.9932 0.7932 0.3080
Mín. -0.6106 -1.0431 -2.4447 -0.4259 -0.6771 Mín. -1.1515 -1.4531 -1.8781 -0.3815 -0.2707
Dif. 1.7153 2.3121 3.3477 1.0261 1.0100 Dif. 2.0481 2.8993 2.8713 1.1747 0.5787
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY Coord. X Coord. Y Cort. X Cort. Y Mom. X Mom. Y Mom. XY
1.950 1.450 Máx. 0.8661 1.4422 0.9893 0.7473 0.3905 2.700 0.700 Máx. 0.9340 1.3283 0.5943 0.5614 0.5099
Mín. -1.1556 -1.3326 -2.0618 -0.4572 -0.2181 Mín. -1.5702 -0.7433 -1.6830 -0.7869 -1.5078
Dif. 2.0216 2.7748 3.0511 1.2046 0.6086 Dif. 2.5043 2.0715 2.2773 1.3483 2.0177
1.950 1.700 Máx. 0.8061 1.2678 0.9780 0.6086 0.4652 2.700 0.950 Máx. 0.9541 1.4346 0.6071 0.6899 0.6882
Mín. -1.1631 -1.0062 -2.5003 -0.4175 -0.1730 Mín. -1.0989 -0.9261 -1.2640 -1.0758 -1.2540
Dif. 1.9692 2.2740 3.4784 1.0261 0.6382 Dif. 2.0530 2.3608 1.8712 1.7657 1.9422
1.950 1.950 Máx. 0.6413 0.9956 0.9611 0.3627 0.5056 2.700 1.200 Máx. 0.9602 1.2671 0.6112 0.7327 0.9188
Mín. -1.1400 -0.5497 -3.0068 -0.2417 -0.1392 Mín. -0.8087 -1.1455 -0.9825 -1.2122 -0.9855
Dif. 1.7813 1.5452 3.9678 0.6044 0.6448 Dif. 1.7690 2.4126 1.5937 1.9449 1.9043
1.950 2.150 Máx. 0.6413 0.9979 0.9611 0.0529 0.4767 2.700 1.450 Máx. 0.9541 0.9366 0.6071 0.6899 1.2041
Mín. -1.1400 -0.3093 -3.0068 -0.0952 -0.1196 Mín. -0.7957 -1.2968 -1.0069 -1.1859 -0.7509
Dif. 1.7813 1.3073 3.9678 0.1481 0.5963 Dif. 1.7498 2.2334 1.6140 1.8758 1.9550
2.200 0.250 Máx. 0.4619 0.4563 0.8840 0.0460 0.2101 2.700 1.700 Máx. 0.9340 0.7433 0.5943 0.5614 1.5225
Mín. -1.1625 -0.9882 -3.0074 -0.0926 -0.7270 Mín. -1.2205 -1.2090 -1.2903 -1.1041 -0.5625
Dif. 1.6245 1.4445 3.8914 0.1386 0.9370 Dif. 2.1545 1.9523 1.8846 1.6654 2.0850
2.200 0.450 Máx. 0.4619 0.6926 0.8840 0.3581 0.2478 2.700 1.950 Máx. 0.8857 0.9320 0.5706 0.3345 1.8016
Mín. -1.1625 -0.9858 -3.0074 -0.2262 -0.7797 Mín. -2.4692 -1.0838 -1.7377 -0.7157 -0.4267
Dif. 1.6245 1.6784 3.8914 0.5843 1.0275 Dif. 3.3548 2.0158 2.3083 1.0501 2.2283
2.200 0.700 Máx. 0.6438 1.1190 0.9029 0.6002 0.3193 2.700 2.150 Máx. 0.8857 0.9300 0.5706 0.0324 1.8041
Mín. -1.1645 -1.2684 -2.5049 -0.3948 -0.7404 Mín. -2.4692 -1.2484 -1.7377 -0.1318 -0.3570
Dif. 1.8083 2.3874 3.4078 0.9949 1.0597 Dif. 3.3548 2.1784 2.3083 0.1643 2.1610
2.200 0.950 Máx. 0.7011 1.3767 0.9152 0.7365 0.4214 2.950 0.250 Máx. 0.9530 1.3716 0.3203 0.0289 0.3401
Mín. -1.1519 -1.4151 -2.0620 -0.4502 -0.6477 Mín. -3.7741 -0.8436 -1.5723 -0.0594 -2.0863
Dif. 1.8530 2.7918 2.9772 1.1867 1.0690 Dif. 4.7271 2.2151 1.8926 0.0883 2.4264
2.200 1.200 Máx. 0.7145 1.3987 0.9194 0.7816 0.5513 2.950 0.450 Máx. 0.9530 1.5121 0.3203 0.3071 0.3983
Mín. -1.1466 -1.4044 -1.6974 -0.5212 -0.5343 Mín. -3.7741 -0.8581 -1.5723 -0.6020 -2.1085
Dif. 1.8611 2.8030 2.6168 1.3028 1.0856 Dif. 4.7271 2.3702 1.8926 0.9091 2.5068
2.200 1.450 Máx. 0.6712 1.3282 0.9152 0.7365 0.7002 2.950 0.700 Máx. 1.0208 1.4118 0.3421 0.5269 0.5366
Mín. -1.1519 -1.3277 -1.8276 -0.6004 -0.4251 Mín. -1.9281 -0.6950 -0.9649 -1.1862 -1.8243
Dif. 1.8232 2.6559 2.7427 1.3369 1.1253 Dif. 2.9489 2.1069 1.3071 1.7132 2.3609
2.200 1.700 Máx. 0.5542 1.1012 0.9029 0.6002 0.8409 2.950 0.950 Máx. 1.0469 1.2683 0.3516 0.6534 0.7339
Mín. -1.1645 -1.0431 -2.2503 -0.5372 -0.3329 Mín. -1.1828 -0.3447 -0.6609 -1.5493 -1.4458
Dif. 1.7186 2.1443 3.1532 1.1374 1.1738 Dif. 2.2298 1.6130 1.0125 2.2027 2.1797
2.200 1.950 Máx. 0.4223 0.9858 0.8840 0.3581 0.9240 2.950 1.200 Máx. 1.0542 0.9331 0.3543 0.6958 0.9889
Mín. -1.3215 -0.6134 -2.7682 -0.3095 -0.2646 Mín. -0.8300 -0.6570 -0.4942 -1.7060 -1.1005
Dif. 1.7438 1.5992 3.6522 0.6676 1.1886 Dif. 1.8842 1.5901 0.8485 2.4018 2.0894
2.200 2.150 Máx. 0.4223 0.9882 0.8840 0.0481 0.8763 2.950 1.450 Máx. 1.0469 0.3999 0.3516 0.6534 1.3119
Mín. -1.3215 -0.3812 -2.7682 -0.1028 -0.2260 Mín. -0.7564 -1.0541 -0.4941 -1.6854 -0.8202
Dif. 1.7438 1.3693 3.6522 0.1509 1.1024 Dif. 1.8033 1.4540 0.8457 2.3388 2.1321
2.450 0.250 Máx. 0.6454 0.5895 0.7543 0.0390 0.2802 2.950 1.700 Máx. 1.0208 0.6950 0.3421 0.5269 1.6986
Mín. -1.6805 -0.9687 -2.7165 -0.1010 -1.1212 Mín. -1.1214 -1.2704 -0.6333 -1.6196 -0.6014
Dif. 2.3259 1.5582 3.4708 0.1401 1.4014 Dif. 2.1421 1.9655 0.9755 2.1466 2.3000
2.450 0.450 Máx. 0.6454 0.8178 0.7543 0.3496 0.3327 2.950 1.950 Máx. 0.9530 0.8581 0.3203 0.3071 2.1204
Mín. -1.6805 -0.9669 -2.7165 -0.2909 -1.1979 Mín. -2.3181 -2.5546 -0.8525 -1.2897 -0.4471
Dif. 2.3259 1.7847 3.4708 0.6405 1.5306 Dif. 3.2711 3.4126 1.1728 1.5968 2.5675
2.450 0.700 Máx. 0.6764 1.2101 0.7760 0.5850 0.4333 2.950 2.150 Máx. 0.9530 0.8436 0.3203 0.0289 2.3274
Mín. -1.1451 -1.0773 -2.1814 -0.5231 -1.1234 Mín. -2.3181 -3.7429 -0.8525 -0.0678 -0.3821
Dif. 1.8216 2.2874 2.9574 1.1082 1.5567 Dif. 3.2711 4.5865 1.1728 0.0966 2.7095
2.450 0.950 Máx. 0.6894 1.4051 0.7891 0.7176 0.5767 3.150 0.450 Máx. 0.8946 1.5121 0.0278 0.3071 0.3758
Mín. -1.0329 -1.2499 -1.7366 -0.7156 -0.9645 Mín. -4.6524 -0.8581 -0.0648 -0.6020 -2.3242
Dif. 1.7222 2.6550 2.5258 1.4332 1.5413 Dif. 5.5470 2.3702 0.0926 0.9091 2.7000
2.450 1.200 Máx. 0.6935 1.3422 0.7935 0.7615 0.7613 3.150 0.700 Máx. 0.9722 1.4118 0.0306 0.5269 0.4944
Mín. -1.0265 -1.3128 -1.3961 -0.8120 -0.7797 Mín. -2.0739 -0.6950 -0.1193 -1.1862 -1.8319
Dif. 1.7200 2.6551 2.1897 1.5734 1.5411 Dif. 3.0460 2.1069 0.1500 1.7132 2.3263
2.450 1.450 Máx. 0.6894 1.1602 0.7891 0.7176 0.9811 3.150 0.950 Máx. 1.0007 1.2683 0.0315 0.6534 0.6814
Mín. -1.0329 -1.3217 -1.4694 -0.8370 -0.6084 Mín. -1.1937 -0.3447 -0.0994 -1.5493 -1.3958
Dif. 1.7222 2.4819 2.2585 1.5546 1.5895 Dif. 2.1944 1.6130 0.1309 2.2027 2.0773
2.450 1.700 Máx. 0.6764 0.8113 0.7760 0.5850 1.2050 3.150 1.200 Máx. 1.0081 0.9331 0.0317 0.6958 0.9232
Mín. -1.1088 -1.1131 -1.8484 -0.7521 -0.4668 Mín. -0.8324 -0.6570 -0.0946 -1.7060 -1.0427
Dif. 1.7852 1.9244 2.6244 1.3371 1.6719 Dif. 1.8405 1.5901 0.1263 2.4018 1.9659
2.450 1.950 Máx. 0.6454 0.9669 0.7543 0.3496 1.3617 3.150 1.450 Máx. 1.0007 0.3999 0.0315 0.6534 1.2312
Mín. -1.9436 -0.7305 -2.3648 -0.4441 -0.3635 Mín. -0.7512 -1.0541 -0.0938 -1.6854 -0.7682
Dif. 2.5890 1.6974 3.1191 0.7937 1.7252 Dif. 1.7519 1.4540 0.1253 2.3388 1.9993
2.450 2.150 Máx. 0.6454 0.9687 0.7543 0.0407 1.3127 3.150 1.700 Máx. 0.9722 0.6950 0.0306 0.5269 1.6124
Mín. -1.9436 -0.5493 -2.3648 -0.1165 -0.3076 Mín. -1.0299 -1.2704 -0.0983 -1.6196 -0.5573
Dif. 2.5890 1.5180 3.1191 0.1571 1.6203 Dif. 2.0020 1.9655 0.1289 2.1466 2.1696
2.700 0.250 Máx. 0.8857 0.7867 0.5706 0.0323 0.3205 3.150 1.950 Máx. 0.8946 0.8581 0.0278 0.3071 2.1048
Mín. -2.4527 -0.9300 -2.2663 -0.1115 -1.5607 Mín. -1.9593 -2.5546 -0.0560 -1.2897 -0.4233
MOD-A4-E_Is.00
Dif. 3.3384 1.7167 2.8369 0.1438 1.8811 Dif. 2.8539 3.4126 0.0839 1.5968 2.5281
2.700 0.450 Máx. 0.8857 0.9962 0.5706 0.3345 0.3841
Mín. -2.4527 -0.9320 -2.2663 -0.3990 -1.6492
Dif. 3.3384 1.9282 2.8369 0.7335 2.0333
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
CORTANTE X
CORTANTE Y
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
CORTANTE TOTAL
MOMENTO X
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
MOMENTO Y
MOMENTO XY
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Cimentación
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
0.250 0.450 Máx. -1.1629 0.6892 0.3037 0.700 0.450 Máx. -1.2469 0.6219 0.2999
Mín. -3.0441 -0.6311 -0.3937 Mín. -2.9953 -0.6204 -0.3729
Dif. 1.8812 1.3203 0.6974 Dif. 1.7484 1.2424 0.6728
0.250 0.700 Máx. -1.1672 0.6715 0.3051 0.700 0.700 Máx. -1.2899 0.6164 0.3006
Mín. -2.9106 -0.6349 -0.3762 Mín. -2.8437 -0.6194 -0.3625
Dif. 1.7434 1.3064 0.6814 Dif. 1.5538 1.2358 0.6631
0.250 0.950 Máx. -1.1712 0.6515 0.3061 0.700 0.950 Máx. -1.2941 0.6085 0.3012
Mín. -2.9048 -0.6420 -0.3660 Mín. -2.7559 -0.6193 -0.3555
Dif. 1.7336 1.2935 0.6720 Dif. 1.4617 1.2278 0.6567
0.250 1.200 Máx. -1.1747 0.6329 0.3066 0.700 1.200 Máx. -1.2978 0.6004 0.3016
Mín. -2.9028 -0.6525 -0.3626 Mín. -2.7553 -0.6209 -0.3531
Dif. 1.7281 1.2854 0.6692 Dif. 1.4575 1.2212 0.6547
0.250 1.450 Máx. -1.1778 0.6225 0.3066 0.700 1.450 Máx. -1.3010 0.5990 0.3018
Mín. -2.9048 -0.6713 -0.3660 Mín. -2.7559 -0.6293 -0.3555
Dif. 1.7270 1.2938 0.6726 Dif. 1.4549 1.2283 0.6573
0.250 1.700 Máx. -1.1804 0.6155 0.3062 0.700 1.700 Máx. -1.3036 0.5992 0.3019
Mín. -2.9106 -0.6915 -0.3762 Mín. -2.8645 -0.6374 -0.3625
Dif. 1.7302 1.3069 0.6825 Dif. 1.5609 1.2366 0.6643
0.250 1.950 Máx. -1.1827 0.6116 0.3053 0.700 1.950 Máx. -1.2516 0.6003 0.3017
Mín. -3.0727 -0.7093 -0.3937 Mín. -3.0214 -0.6431 -0.3729
Dif. 1.8901 1.3210 0.6990 Dif. 1.7699 1.2435 0.6746
0.450 0.250 Máx. -1.1365 0.6513 0.3004 0.700 2.150 Máx. -1.1344 0.6014 0.3013
Mín. -3.1480 -0.6255 -0.4067 Mín. -3.1471 -0.6448 -0.3876
Dif. 2.0115 1.2768 0.7071 Dif. 2.0127 1.2461 0.6889
0.450 0.450 Máx. -1.2172 0.6484 0.3022 0.950 0.250 Máx. -1.1162 0.6028 0.2973
Mín. -3.0209 -0.6253 -0.3863 Mín. -3.0917 -0.6174 -0.3670
Dif. 1.8037 1.2737 0.6885 Dif. 1.9755 1.2202 0.6643
0.450 0.700 Máx. -1.2217 0.6393 0.3033 0.950 0.450 Máx. -1.2364 0.6020 0.2976
Mín. -2.8627 -0.6264 -0.3722 Mín. -2.9744 -0.6158 -0.3566
Dif. 1.6411 1.2657 0.6755 Dif. 1.7381 1.2178 0.6542
0.450 0.950 Máx. -1.2258 0.6270 0.3041 0.950 0.700 Máx. -1.3586 0.5984 0.2979
Mín. -2.8384 -0.6293 -0.3633 Mín. -2.8277 -0.6132 -0.3491
Dif. 1.6126 1.2563 0.6674 Dif. 1.4692 1.2116 0.6470
0.450 1.200 Máx. -1.2294 0.6146 0.3046 0.950 0.950 Máx. -1.3628 0.5934 0.2982
Mín. -2.8371 -0.6347 -0.3603 Mín. -2.6810 -0.6108 -0.3440
Dif. 1.6077 1.2493 0.6649 Dif. 1.3182 1.2042 0.6422
0.450 1.450 Máx. -1.2325 0.6094 0.3047 0.950 1.200 Máx. -1.3666 0.5883 0.2985
Mín. -2.8384 -0.6473 -0.3633 Mín. -2.6746 -0.6094 -0.3422
Dif. 1.6059 1.2567 0.6680 Dif. 1.3080 1.1977 0.6408
0.450 1.700 Máx. -1.2351 0.6065 0.3045 0.950 1.450 Máx. -1.3698 0.5900 0.2989
Mín. -2.8851 -0.6598 -0.3722 Mín. -2.6949 -0.6148 -0.3440
Dif. 1.6500 1.2663 0.6767 Dif. 1.3251 1.2048 0.6429
0.450 1.950 Máx. -1.2373 0.6055 0.3039 0.950 1.700 Máx. -1.3726 0.5927 0.2993
Mín. -3.0484 -0.6690 -0.3863 Mín. -2.8470 -0.6201 -0.3491
Dif. 1.8111 1.2746 0.6902 Dif. 1.4744 1.2128 0.6484
0.450 2.150 Máx. -1.1431 0.6057 0.3027 0.950 1.950 Máx. -1.2432 0.5955 0.2998
Mín. -3.1797 -0.6720 -0.4067 Mín. -2.9992 -0.6239 -0.3566
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
1.200 0.250 Máx. -1.1082 0.5885 0.2972 1.700 1.450 Máx. -1.4161 0.5775 0.2983
Mín. -3.0735 -0.6142 -0.3467 Mín. -2.6723 -0.5974 -0.3050
Dif. 1.9653 1.2027 0.6439 Dif. 1.2562 1.1748 0.6033
1.200 0.450 Máx. -1.2277 0.5882 0.2967 1.700 1.700 Máx. -1.3746 0.5832 0.3006
Mín. -2.9591 -0.6121 -0.3395 Mín. -2.8196 -0.6002 -0.3066
Dif. 1.7314 1.2003 0.6362 Dif. 1.4451 1.1834 0.6072
1.200 0.700 Máx. -1.3770 0.5857 0.2963 1.700 1.950 Máx. -1.2315 0.5880 0.3038
Mín. -2.8158 -0.6084 -0.3343 Mín. -2.9665 -0.6024 -0.3089
Dif. 1.4388 1.1942 0.6306 Dif. 1.7350 1.1903 0.6126
1.200 0.950 Máx. -1.4138 0.5824 0.2962 1.700 2.150 Máx. -1.1168 0.5904 0.3080
Mín. -2.6721 -0.6044 -0.3307 Mín. -3.0836 -0.6026 -0.3121
Dif. 1.2583 1.1868 0.6269 Dif. 1.9668 1.1930 0.6201
1.200 1.200 Máx. -1.4143 0.5794 0.2964 1.950 0.250 Máx. -1.0962 0.5801 0.3195
Mín. -2.5954 -0.6010 -0.3295 Mín. -3.0624 -0.6122 -0.3065
Dif. 1.1811 1.1805 0.6259 Dif. 1.9662 1.1923 0.6260
1.200 1.450 Máx. -1.4138 0.5832 0.2970 1.950 0.450 Máx. -1.2152 0.5800 0.3146
Mín. -2.6842 -0.6045 -0.3307 Mín. -2.9497 -0.6100 -0.3047
Dif. 1.2703 1.1877 0.6277 Dif. 1.7344 1.1900 0.6193
1.200 1.700 Máx. -1.3810 0.5876 0.2979 1.950 0.700 Máx. -1.3639 0.5782 0.3110
Mín. -2.8334 -0.6082 -0.3343 Mín. -2.8084 -0.6059 -0.3034
Dif. 1.4524 1.1957 0.6322 Dif. 1.4445 1.1841 0.6145
1.200 1.950 Máx. -1.2368 0.5915 0.2990 1.950 0.950 Máx. -1.4155 0.5758 0.3087
Mín. -2.9823 -0.6109 -0.3395 Mín. -2.6665 -0.6013 -0.3025
Dif. 1.7455 1.2023 0.6386 Dif. 1.2510 1.1771 0.6112
1.200 2.150 Máx. -1.1215 0.5936 0.3005 1.950 1.200 Máx. -1.4160 0.5740 0.3081
Mín. -3.1013 -0.6113 -0.3467 Mín. -2.5238 -0.5974 -0.3022
Dif. 1.9798 1.2049 0.6472 Dif. 1.1078 1.1714 0.6103
1.450 0.250 Máx. -1.1021 0.5801 0.2993 1.950 1.450 Máx. -1.4155 0.5789 0.3094
Mín. -3.0624 -0.6120 -0.3281 Mín. -2.6715 -0.6005 -0.3025
Dif. 1.9603 1.1922 0.6274 Dif. 1.2560 1.1794 0.6119
1.450 0.450 Máx. -1.2211 0.5800 0.2976 1.950 1.700 Máx. -1.3762 0.5843 0.3126
Mín. -2.9497 -0.6098 -0.3232 Mín. -2.8197 -0.6040 -0.3034
Dif. 1.7286 1.1898 0.6209 Dif. 1.4435 1.1883 0.6160
1.450 0.700 Máx. -1.3697 0.5782 0.2965 1.950 1.950 Máx. -1.2328 0.5889 0.3171
Mín. -2.8084 -0.6055 -0.3197 Mín. -2.9675 -0.6066 -0.3047
Dif. 1.4387 1.1837 0.6162 Dif. 1.7347 1.1955 0.6218
1.450 0.950 Máx. -1.4155 0.5758 0.2958 1.950 2.150 Máx. -1.1180 0.5913 0.3234
Mín. -2.6665 -0.6006 -0.3173 Mín. -3.0856 -0.6071 -0.3065
Dif. 1.2510 1.1764 0.6132 Dif. 1.9676 1.1983 0.6299
1.450 1.200 Máx. -1.4160 0.5740 0.2959 2.200 0.250 Máx. -1.0963 0.5885 0.3374
Mín. -2.5282 -0.5962 -0.3165 Mín. -3.0735 -0.6143 -0.3038
Dif. 1.1122 1.1702 0.6124 Dif. 1.9771 1.2028 0.6412
1.450 1.450 Máx. -1.4155 0.5789 0.2967 2.200 0.450 Máx. -1.2158 0.5882 0.3300
Mín. -2.6765 -0.5987 -0.3173 Mín. -2.9591 -0.6124 -0.3031
Dif. 1.2610 1.1776 0.6140 Dif. 1.7432 1.2006 0.6331
1.450 1.700 Máx. -1.3762 0.5843 0.2982 2.200 0.700 Máx. -1.3652 0.5857 0.3246
Mín. -2.8242 -0.6016 -0.3197 Mín. -2.8158 -0.6091 -0.3025
Dif. 1.4480 1.1859 0.6179 Dif. 1.4505 1.1948 0.6272
1.450 1.950 Máx. -1.2328 0.5889 0.3003 2.200 0.950 Máx. -1.4138 0.5824 0.3210
Mín. -2.9714 -0.6038 -0.3232 Mín. -2.6721 -0.6056 -0.3022
Dif. 1.7386 1.1926 0.6235 Dif. 1.2583 1.1881 0.6232
1.450 2.150 Máx. -1.1180 0.5913 0.3030 2.200 1.200 Máx. -1.4143 0.5794 0.3198
Mín. -3.0888 -0.6040 -0.3281 Mín. -2.5924 -0.6032 -0.3020
Dif. 1.9709 1.1953 0.6311 Dif. 1.1781 1.1827 0.6218
1.700 0.250 Máx. -1.0981 0.5774 0.3042 2.200 1.450 Máx. -1.4138 0.5832 0.3214
Mín. -3.0587 -0.6113 -0.3121 Mín. -2.6738 -0.6079 -0.3022
Dif. 1.9605 1.1887 0.6162 Dif. 1.2600 1.1911 0.6235
1.700 0.450 Máx. -1.2170 0.5773 0.3010 2.200 1.700 Máx. -1.3810 0.5876 0.3256
Mín. -2.9465 -0.6090 -0.3089 Mín. -2.8241 -0.6129 -0.3025
Dif. 1.7296 1.1863 0.6099 Dif. 1.4432 1.2005 0.6281
1.700 0.700 Máx. -1.3654 0.5757 0.2988 2.200 1.950 Máx. -1.2368 0.5915 0.3320
Mín. -2.8059 -0.6046 -0.3066 Mín. -2.9744 -0.6166 -0.3031
Dif. 1.4405 1.1803 0.6054 Dif. 1.7376 1.2081 0.6350
1.700 0.950 Máx. -1.4161 0.5736 0.2975 2.200 2.150 Máx. -1.1215 0.5936 0.3409
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Coord. X Coord. Y Desp. Z Giro X Giro Y Coord. X Coord. Y Desp. Z Giro X Giro Y
2.450 0.450 Máx. -1.2185 0.6020 0.3463 2.950 0.250 Máx. -1.1063 0.6513 0.3958
Mín. -2.9744 -0.6161 -0.3036 Mín. -3.1480 -0.6250 -0.3060
Dif. 1.7559 1.2181 0.6499 Dif. 2.0417 1.2763 0.7018
2.450 0.700 Máx. -1.3597 0.5984 0.3385 2.950 0.450 Máx. -1.2190 0.6484 0.3750
Mín. -2.8277 -0.6139 -0.3036 Mín. -3.0209 -0.6250 -0.3076
Dif. 1.4680 1.2123 0.6421 Dif. 1.8019 1.2733 0.6825
2.450 0.950 Máx. -1.3606 0.5934 0.3331 2.950 0.700 Máx. -1.2202 0.6393 0.3603
Mín. -2.6810 -0.6123 -0.3037 Mín. -2.8627 -0.6263 -0.3085
Dif. 1.3205 1.2056 0.6368 Dif. 1.6426 1.2656 0.6688
2.450 1.200 Máx. -1.3608 0.5883 0.3311 2.950 0.950 Máx. -1.2209 0.6270 0.3507
Mín. -2.6690 -0.6122 -0.3037 Mín. -2.8230 -0.6299 -0.3091
Dif. 1.3082 1.2005 0.6348 Dif. 1.6020 1.2569 0.6598
2.450 1.450 Máx. -1.3606 0.5900 0.3328 2.950 1.200 Máx. -1.2212 0.6146 0.3467
Mín. -2.6789 -0.6194 -0.3037 Mín. -2.8252 -0.6366 -0.3093
Dif. 1.3183 1.2094 0.6365 Dif. 1.6040 1.2512 0.6560
2.450 1.700 Máx. -1.3597 0.5927 0.3384 2.950 1.450 Máx. -1.2209 0.6094 0.3486
Mín. -2.8324 -0.6269 -0.3036 Mín. -2.8303 -0.6515 -0.3091
Dif. 1.4727 1.2196 0.6420 Dif. 1.6094 1.2609 0.6576
2.450 1.950 Máx. -1.2432 0.5955 0.3470 2.950 1.700 Máx. -1.2202 0.6065 0.3562
Mín. -2.9866 -0.6327 -0.3036 Mín. -2.8573 -0.6678 -0.3085
Dif. 1.7434 1.2281 0.6506 Dif. 1.6371 1.2744 0.6647
2.450 2.150 Máx. -1.1271 0.5971 0.3596 2.950 1.950 Máx. -1.2190 0.6055 0.3695
Mín. -3.1101 -0.6346 -0.3035 Mín. -3.0233 -0.6829 -0.3076
Dif. 1.9830 1.2317 0.6631 Dif. 1.8044 1.2884 0.6771
2.700 0.250 Máx. -1.1017 0.6235 0.3770 2.950 2.150 Máx. -1.1431 0.6057 0.3927
Mín. -3.1167 -0.6213 -0.3046 Mín. -3.1583 -0.6920 -0.3060
Dif. 2.0150 1.2448 0.6816 Dif. 2.0152 1.2977 0.6987
2.700 0.450 Máx. -1.2228 0.6219 0.3620 3.150 0.450 Máx. -1.1636 0.6892 0.3821
Mín. -2.9953 -0.6204 -0.3054 Mín. -3.0441 -0.6302 -0.3090
Dif. 1.7725 1.2424 0.6674 Dif. 1.8805 1.3194 0.6911
2.700 0.700 Máx. -1.2897 0.6164 0.3511 3.150 0.700 Máx. -1.1647 0.6715 0.3641
Mín. -2.8437 -0.6198 -0.3060 Mín. -2.8895 -0.6341 -0.3103
Dif. 1.5540 1.2362 0.6571 Dif. 1.7248 1.3056 0.6744
2.700 0.950 Máx. -1.2905 0.6085 0.3436 3.150 0.950 Máx. -1.1654 0.6515 0.3531
Mín. -2.7436 -0.6206 -0.3063 Mín. -2.8869 -0.6415 -0.3109
Dif. 1.4530 1.2291 0.6499 Dif. 1.7215 1.2930 0.6640
2.700 1.200 Máx. -1.2908 0.6004 0.3405 3.150 1.200 Máx. -1.1656 0.6329 0.3486
Mín. -2.7467 -0.6236 -0.3065 Mín. -2.8882 -0.6528 -0.3112
Dif. 1.4559 1.2240 0.6470 Dif. 1.7226 1.2857 0.6598
2.700 1.450 Máx. -1.2905 0.5990 0.3424 3.150 1.450 Máx. -1.1654 0.6225 0.3504
Mín. -2.7514 -0.6343 -0.3063 Mín. -2.8937 -0.6731 -0.3109
Dif. 1.4608 1.2333 0.6487 Dif. 1.7284 1.2956 0.6614
2.700 1.700 Máx. -1.2897 0.5992 0.3491 3.150 1.700 Máx. -1.1647 0.6155 0.3584
Mín. -2.8438 -0.6456 -0.3060 Mín. -2.9035 -0.6962 -0.3103
Dif. 1.5541 1.2448 0.6551 Dif. 1.7388 1.3116 0.6687
2.700 1.950 Máx. -1.2516 0.6003 0.3603 3.150 1.950 Máx. -1.1636 0.6116 0.3727
Mín. -3.0033 -0.6550 -0.3054 Mín. -3.0406 -0.7199 -0.3090
Dif. 1.7517 1.2553 0.6658 Dif. 1.8770 1.3315 0.6817
2.700 2.150 Máx. -1.1344 0.6014 0.3778
Mín. -3.1317 -0.6591 -0.3046
Dif. 1.9973 1.2605 0.6824
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Deformada
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
En el informe geotécnico se detectó napa freática en todas las calicatas ejecutadas, generalmente en
superficie, entre 0,00 a 0,40 metros de profundidad medidos desde nivel de terreno a la fecha de las
prospecciones (19 y 20 de julio de 2022).
Se va a estudiar el empuje generado por la napa freática sobre las distintas cimentaciones y
compararlo con el peso de la cimentación para que no se produzca la supresión de esta.
Centros de Transformación
El sello de fundación se encuentra a una profundidad de 0,35 m. sobre el nivel del terreno, que es el
caso más desfavorable de napa freática, lo que produce un empuje sobre la cimentación del Centro
de Transformación de:
𝐸 𝑑 ⋅𝐴 ⋅𝛾
Donde:
- dW es la diferencia entre la profundidad de la excavación y el nivel de la napa freática,
0,35 m.
- Alosa área de la losa de cimentación, 18,95 m2.
- γagua densidad del agua, 10 kN/m3.
Por lo que el empuje más desfavorable sobre la cimentación de los Centros de Transformación es de:
𝐸 66,325 𝑘𝑁
Para contrarrestar este empuje está el peso de la cimentación compuesta por la losa armada, pilares
enanos, vigas de atado y arqueta in-situ para depósito de aceite.
El peso de dicha cimentación es el volumen de hormigón de esta (11,443 m3), multiplicada por la
densidad del hormigón armado (25 kN/m3), dando un peso total de 286,08 kN.
De estos resultados se deduce que, al ser el peso de la cimentación superior al empuje debido a la
napa freática, no se va a producir la supresión de la cimentación.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Control Room
El sello de fundación se encuentra a una profundidad de 0,10 m. sobre el nivel del terreno, que es el
caso más desfavorable de napa freática, lo que produce un empuje sobre la cimentación del Control
Room de:
𝐸 𝑑 ⋅𝐴 ⋅𝛾
Donde:
- dW es la diferencia entre la profundidad de la excavación y el nivel de la napa freática,
0,10 m.
- Alosa área de la losa de cimentación, 8,16 m2.
- γagua densidad del agua, 10 kN/m3.
Por lo que el empuje más desfavorable sobre la cimentación del control Room es de:
𝐸 8,16 𝑘𝑁
Para contrarrestar este empuje está el peso de la cimentación compuesta por la losa armada.
El peso de dicha cimentación es el volumen de hormigón de esta (1,632 m3), multiplicada por la
densidad del hormigón armado (25 kN/m3), dando un peso total de 40,80 kN.
De estos resultados se deduce que, al ser el peso de la cimentación superior al empuje debido a la
napa freática, no se va a producir la supresión de la cimentación.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Issue Draft A
Date 2022-09-07
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://e.huawei.com
Purpose
This document describes the appearance, transportation, storage, human-machine
interaction, and maintenance of the JUPITER-3000K-H1, JUPITER-6000K-H1,
JUPITER-9000K-H1 Smart Transformer Station (also referred to as the STS). Before
installing and operating the STS, read through this document to understand the
safety precautions and get familiar with the functions and features of the STS.
Figures used in this document are for reference only.
Intended Audience
This document is intended for photovoltaic (PV) plant operating personnel and
qualified electricians.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Symbol Description
Change History
Changes between document issues are cumulative. The latest document issue
contains all the changes made in earlier issues.
Issue 01 (2022-09-07)
This issue is used for first office application (FOA).
Contents
2 Products Description.............................................................................................................13
2.1 Overview.................................................................................................................................................................................. 13
2.2 Appearance............................................................................................................................................................................. 14
2.3 Label Description.................................................................................................................................................................. 16
2.4 Components............................................................................................................................................................................ 16
2.4.1 STS.......................................................................................................................................................................................... 17
2.4.2 LV Room................................................................................................................................................................................18
2.4.3 Transformer Room............................................................................................................................................................ 19
2.4.4 MV Room............................................................................................................................................................................. 21
2.4.4.1 DQS-12/24 (CVC)........................................................................................................................................................... 21
2.4.4.2 DQS-12/24 (DVC).......................................................................................................................................................... 22
2.4.4.3 DQS-36 and DQS-40.5 (CVC).................................................................................................................................... 23
2.4.4.4 DQS-40.5 (DVC)............................................................................................................................................................. 24
2.4.4.5 CGM.3 (CVC)................................................................................................................................................................... 25
2.4.4.6 CGM.3 (DVC)................................................................................................................................................................... 26
2.4.4.7 8DJH12/24 (CCV)........................................................................................................................................................... 27
2.4.4.8 8DJH36 (CCV)..................................................................................................................................................................28
2.4.4.9 8DJH12/24 (DCV)...........................................................................................................................................................29
2.4.4.10 8DJH36 (DCV)............................................................................................................................................................... 30
2.4.4.11 8DJH38 (DCV)............................................................................................................................................................... 31
2.5 Configuration Scenario....................................................................................................................................................... 33
3 Electrical Connections.......................................................................................................... 35
1 Safety Information
General Requirements
DANGER
WARNING
CAUTION
● Do not install other devices on the top of the equipment without the
permission of the Company.
● Do not perform operations such as arc welding, drilling, or cutting on the
equipment. Such operations may damage the container airtightness, equipment
electromagnetic containment, internal components, and cables. Metal scraps
generated during such operations may enter the equipment, which will cause
short circuits on circuit boards, affect equipment functions, or damage the
equipment.
● Do not touch any area where a burn warning sign is attached to prevent burn
hazard.
● Repaint any scratched surfaces caused during equipment transportation or
installation in a timely manner. Scratched equipment surface should not be
exposed to an outdoor environment for extended periods.
● The keys to the door locks of the medium-voltage room, low-voltage room, and
transformer room must be properly kept. Unauthorized personnel are not
allowed to work on the equipment.
● After installing the equipment, clear away packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
● When performing operations (such as hoisting) over the top of the equipment,
take measures to protect the equipment against damage. After the operations
are complete, check whether the protective paint is damaged. If yes, repair the
paint in a timely manner.
● If there is a likelihood of personal injury or equipment damage during
operations, immediately stop the operation, report the case to the supervisor,
and take feasible protective measures.
● The equipment has an arc discharge channel for the medium-voltage room.
Install the equipment according to the equipment foundation diagram and
ensure that the gap between the medium-voltage room and the foundation is
filled with materials such as mortar.
● During the operation and maintenance of the equipment, if you need to leave
temporarily, close and lock the cabinet doors.
NOTICE
NOTE
● Class C environment: Outdoor areas more than 500 m away from the sea. If a site
is near a pollution source, it must be 1500–3000 m away from heavy pollution
sources, such as smelteries, coal mines, and thermal power plants; 1000–2000 m
away from medium pollution sources such as chemicals, rubber, and galvanization;
or 500–1000 m away from light pollution sources, such as packing houses,
tanneries, boiler rooms, slaughterhouses, landfill sites, and sewage treatment
plants.
● Class D environment: Sea environments or outdoor areas within 500 m away from
the sea. If a site is near a pollution source, it is within 1500 m away from heavy
pollution sources such as smelteries, coal mines, and thermal power plants, within
1000 m away from medium pollution sources such as chemical, rubber, and
galvanization industries, or within 500 m away from light pollution sources such as
packing houses, tanneries, boiler rooms, slaughterhouses, landfill sites, and sewage
treatment plants.
● Class E environment: Special environments, such as underground or underwater
environments.
Grounding
● Do not damage the ground conductor.
● Do not work on the equipment in the absence of a properly installed ground
conductor.
● For the equipment that needs to be grounded, install the ground cable first
when installing the equipment and remove the ground cable last when
removing the equipment.
● The main grounding body of the equipment must be permanently connected
to the grounding grid. Before working on the equipment, check its electrical
connections to ensure that it is reliably grounded.
NOTICE
Using Ladders
● Before using a ladder, ensure that it is intact and its load bearing capacity is
adequate. Do not load a ladder with a weight in excess of its duty rating.
● Use wooden or fiberglass ladders when you need to perform live-line working
at heights.
● Platform ladders with protective rails are preferred. The ladder must be
secured at the four feet and held by a person.
● When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held firm by a person.
● If a straight ladder is used, the ladder must be placed in a secure place. The
recommended angle for a ladder against the floor is 75 degrees, as shown in
the following figure. An angle ruler can be used to measure the angle. Ensure
that the wider end of the ladder is at the bottom, or protective measures have
been taken at the bottom to prevent the ladder from sliding. The ladder must
be held by another person during the operation.
● When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
– Keep your body steady.
– Do not climb higher than the fourth rung of the ladder from the top.
– Keep your center of gravity between the side rails, and do not overreach
to the sides.
● Wear protective gloves and anti-smashing shoes when manually moving the
equipment.
● Do not scratch the equipment surface or damage components or cables when
moving the equipment.
● When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
● Move the equipment with caution to prevent collision or fall.
1.7 Commissioning
After the equipment is powered on for the first time, ensure that the parameters
are set correctly by professional personnel. Incorrect parameter settings may result
in noncompliance with local grid connection requirements and affect the normal
operations of the equipment.
CAUTION
Before removing a component from the cabinet, ensure that other components on
the cabinet are secure.
NOTICE
● After the equipment stops running, wait for at least 10 minutes to ensure that
the voltage is in the safe range. Before maintenance or repair, ensure that the
transfer switch is turned to the ground position, the potential indicator is off,
the grounding switch of cabinet V in the ring main unit is turned on, and the
low-voltage cabinet is grounded.
● During maintenance, turn off the air circuit breaker on the low-voltage side
and the switch on the high-voltage side of the equipment, and place warning
signs indicating that the switches must not be turned on. If the equipment
supports the automatic mode, disable the automatic mode to ensure that the
equipment will not be powered on unexpectedly.
● Before maintaining the equipment, ensure that the switches on the low-
voltage and high-voltage sides of the equipment are turned off, and the
grounding switch of the circuit breaker cabinet on the medium-voltage side is
turned on.
● If a switch needs to be turned off for maintenance, place a warning sign
indicating that the switch must not be turned on.
2 Products Description
2.1 Overview
Functions
An STS converts low-voltage (LV) AC power generated by solar inverters into
medium-voltage (MV) AC power and feeds it into a power grid.
It is a steel-structure container that houses devices include the LV cabinet,
transformer, ring main unit, and auxiliary power supply to provide a highly
integrated power transformation and distribution solution for utility-scale PV
plants in MV grid-connection scenarios.
Networking
The STS applies to grid-connected large PV plants. A typical grid-connected PV
system consists of PV strings, SUN2000 solar inverters, switch boxes, and an STS.
(A) PV string (B) SUN2000 solar inverter (C) Switch box (optional)
2.2 Appearance
Figure 2-2 Appearance
(1) Low-voltage room (LV) (2) Transformer room (TR) (3) MV room (MV)
(4) Installation position for the (5) Installation position for the (6) Double-swing door for the
UPS Smart Array Controller (SACU) MV room
(7) Ring main unit (8) Auxiliary transformer (9) Double-swing screen door
for the TR room
(10) Holes for AC output (11) Single-swing door for the (12) Double-swing door for the
power cables LV room LV room
2.4 Components
2.4.1 STS
Figure 2-5 STS components
2.4.2 LV Room
Figure 2-6 LV PANEL front view
(1) Multimeters (2) Miniature circuit breakers (3) Air circuit breakers
(MULTIFUNCTION METER,
optional)
2 Oil feed and Refills or drains oil. ● Oil refilling: Refills the transformer oil
drain valve using an uncontaminated metal or non-
rubber hose and oil injection equipment.
(Note: Prevent air from entering.)
● Oil draining: Lead the transformer oil to
a container using an uncontaminated
metal or non-rubber hose.
3 Oil temperature Measures and Displays the top layer of transformer oil in
indicator controls the real time and issues alarms and trip signals
temperature of the through the built-in temperature control
top layer of switch.
transformer oil.
5 Off-load tap Regulates the There are five levels. Level 1 indicates the
changer voltage. maximum tapping value, level 3 indicates
the rated tapping value, and level 5
indicates the minimum tapping value.
7 Oil level gauge Indicates the oil level. Indicates the oil level of the transformer oil
cabinet and reports the alarms of high and
low oil levels.
2.4.4 MV Room
For details about the ring main unit, see the ring main unit manual provided by
the manufacturer. See the ring main unit model on the nameplate.
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Operation holes of (2) Load switch operation (3) Isolation switch operation
grounding switches holes hole
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Operation holes of (2) Load switch operation (3) Isolation switch operation
grounding switches holes hole
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Operation holes of (2) Load switch operation (3) Isolation switch operation
grounding switches holes hole
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Operation holes of (2) Load switch operation (3) Isolation switch operation
grounding switches holes hole
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Load switch operation (2) Grounding switch operation (3) Cable connectors
holes holes
No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are
for reference only. The actual position and dimensions may vary.
(1) Load switch operation (2) Grounding switch operation (3) Cable connectors
holes holes
● The CCV ring main unit includes a circuit breaker cabinet and two load switch cabinets.
● The secondary room of the ring main unit cannot be opened when the power is on.
(4) Manually switching off the (5) Manually switching on the (6) Relay
circuit breaker circuit breaker
● The CCV ring main unit includes a circuit breaker cabinet and two load switch cabinets.
● The secondary room of the ring main unit cannot be opened when the power is on.
(4) Manually switch off the (5) Manually switch on the (6) Circuit breaker electrical
circuit breaker circuit breaker control switch
(7) Relay - -
● The DCV ring main unit includes a direct cable entry cabinet, a load switch cabinet, and
a circuit breaker cabinet.
● The secondary room of the ring main unit cannot be opened when the power is on.
(4) Manually switch off the (5) Manually switch on the (6) Circuit breaker electrical
circuit breaker circuit breaker control switch
● The DCV ring main unit includes a direct cable entry cabinet, a load switch cabinet, and
a circuit breaker cabinet.
● The secondary room of the ring main unit cannot be opened when the power is on.
(4) Manually switch off the (5) Manually switch on the (6) Circuit breaker electrical
circuit breaker circuit breaker control switch
(7) Relay - -
● The DCV ring main unit includes a direct cable entry cabinet, a load switch cabinet, and
a circuit breaker cabinet.
● The secondary room of the ring main unit cannot be opened when the power is on.
Component Description
Component Description
3 Electrical Connections
NOTICE
Figure 3-1 Cable connections (configure the components in the dotted box as
required)
(A) Side view of the STS LV (B) Front view of the STS (C) Side view of the STS MV
cabinet room
(G) Smart array controller (H) Support tracking system (I) Power-consuming device
(SACU)
Note a: The AC input power cable can connect to a 300 mm2 or 400 mm2 single-core cable. The
restrictions are as follows:
● Outer diameter of a single-core cable ≤ 35 mm
● Dimensions of the wiring terminal: width ≤ 43 mm; length ≤ 136.5 mm; outer diameter of the
crimping tube ≤ 37 mm
If the STS has reached its service life, dispose of it according to the local disposal
act for waste electrical appliances.
5 Technical Specifications
NOTE
Some parameters involve two types of cabinets. For details, see the nameplates of the
cabinets.
Input
Technical JUPITER-3000K-H1 JUPITER-6000K-H1 JUPITER-9000K-H1
Specifications
Rated ● 10 kV/11 kV/13.2 kV/15 kV/20 kV/22 kV/23 kV/30 kV/33 kV/35 kV: 50 Hz
frequency ● 13.8 kV/33 kV/34.5 kV: 60 Hz
Transformer
Technical JUPITER-3000K-H1 JUPITER-6000K-H1 JUPITER-9000K-H1
Specification
s
Rated output 10 kV/11 kV/13.2 kV/13.8 kV/15 kV/20 kV/22 kV/23 kV/30 kV/33 kV/34.5 kV /35
voltage kV
Tapping ±2 x 2.5%
range
Protection
Technical JUPITER -3000K- JUPITER -6000K-H1 JUPITER-9000K-H1
Specifications H1
General Specifications
Technical JUPITER -3000K-H1 JUPITER -6000K-H1 JUPITER-9000K-
Specifications H1
Feature Specifications
Technical JUPITER -3000K-H1 JUPITER -6000K-H1 JUPITER-9000K-H1
Specification
s
Transformer Oil-immersed
type
Transformer ONAN
cooling type
MV SF6, 12–40.5 kV, 600/630 A, three feeders (CVC/CCV or DVC/DCV), 20 kA/3s, 50BF
switchgear (Optional), 50G/51G (Optional)
LV Room ACB (2900 A/800 V/3P) ACB (2900 A/800 V/ ACB (4000 A/800 V/3P),
and MCCB (400 A/800 3P), MCCB (400 A/800 MCCB (400 A/800 V/3P, 2
V/3P, 17 PCS) V/3P, 2 x 11 PCS) x 15 PCS)
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
State Key Laboratory of Disaster Reduction in Civil Engineering
Tongji University, Shanghai, China
20ft S container
Device code:STS
Entrusting company:Huawei Technologies Co Ltd
Date of analysis:From April 15, 2019 to May 15, 2019
Analysis software:General finite element software ABAQUS 6.14
Basis and criteria:
YD 5083-2005
ASME-AG-1-2015
Content
2. Analysis object……………………………………………..2~4
5. Results………………………………………………………..8~43
6. Performance evaluation…………...………………………...44~45
Appendix 1………………………………………………………47
Appendix 2………………………………………………………48
2. Analysis object
2.1 Geometric features and structural components
According to the container simulation test requirements, the object of
calculation and analysis is the container produced by Huawei Technologies Co Ltd.
The size of the container (length×width×height) is 6050mm×2450mm×2850mm,
as shown in Figure 2.1.
The main frame of this container is composed of column, beam, top plate,
bottom plate, partition wall, top strengthening beam, bottom strengthening beam and
connecting components. Q355GNH weathering resistant steel is used for steel plates
with a thickness of not more than 6mm in the whole container, and Q235B steel is
used for steel plates exceeding 6mm. Steel angle and welded steel sheet utilize Q345
steel. The thickness of the top plate and the wall plate is 1.6 mm, and the bottom plate
and the door plate are 3.0 mm thick steel plates. The top side beam is a 120mm×
100mm square steel tube with thickness of 4.0 mm; the bottom side beam is a 175mm
×175mm H-shaped section beam with thickness of 10.0mm; the column is a 6.0mm
thick steel plate; top strengthening beam is a 120mm×35mm U-shaped section beam
with thickness of 3.0mm; bottom strengthening beam is a 250mm×160mm U-shaped
section beam with thickness of 10.0mm. The container-to-ground connecting piece is
angle steel, with thickness of 16.0mm. The anchor bolts, connecting bolts of the
transformer to the bottom plate and the connecting bolts of the angle steel to the
bottom side beams are M20, M16 and M16 stainless steel bolts, respectively.
The container is divided into three compartments: low voltage chamber, variable
voltage chamber, and medium voltage chamber. The low voltage chamber is used to
place the low voltage cabinet; the variable voltage is used to place the transformer;
and the medium voltage chamber is used to place the ring network cabinet. The main
frame of the container, the transformer, the low voltage cabinet, and the ring network
cabinet weigh 5.5t, 15t, 1.6t and 0.8t respectively. Including other additional
components, the total weight of container is about 23.17t.
Stainless See
2.05×105 0.30 7800 450 700
steel bolt Table 4.2
The total weight of the container main frame, low voltage cabinet, transformer,
ring network cabinet and other small components is about 23.47t, and acceleration of
gravity is equal to 9.81 m/s2.
According to the container simulation test requirements, the seismic load should
be checked according to the ZONE 4 standard of GR-63-CORE, and the damping
ratio is 0.05. The reaction spectra is detailed in Table 3.1 and Appendix 1.
Table 3.1 Response spectra required for seismic analysis
Amplitude (g)
Direction Frequency (Hz)
damping ratio 5%
0.3 0.2
0.6 2.0
Horizontal 2.0 5.0
5.0 5.0
15.0 1.6
50.0 1.6
0.3 0.2
0.6 2.0
2.0 5.0
Vertical 5.0 5.0
15.0 1.6
50.0 1.6
According to the simulation test requirements and criterions, the wind speed to
be checked is 52.4m/s.
According to the bearing capacity of the strengthening beam at the top of the
container, the maximum snow load that the container roof can withstand is estimated.
(1) Combination condition of Seismic load and Wind load (Combination B):
DW+SL+Wind;
(2) Combination condition of Seismic load, Wind load and Snow load
(Combination D):DW+SL+Wind+Snow;
(3) Consider only snow load.
3.6 Boundary conditions
The four main columns of the container are in contact with the ground for
receiving vertical loads, and six angle steels are bolted to fix the anchor bolts. Each
angle steel is fixed to the ground with two M20 stainless steel bolts to withstand the
overturning moment under seismic and/or wind loads.
Table 4.1 Stress evaluation criterion and limits for plate and shell support
components (MPa)
Combinat Type of Stress
Q235B Q355GNH Q345
ion stress limit
1 1.0S 125 160 155
B、D
1 2 1.5S 187.5 240 232.5
Table 4.2 Stress evaluation criterion and limits for stainless steel bolt (MPa)
Type of Stress
Combination Allowable stress
stress limit
Tensile
Ftb Su / 3.33 210.21
stress f f
B、D ( t )2 ( v )2 1
Shear Ftb Fvb
Fvb 0.62Su /5 86.8
stress
5. Calculation results
The first 200-order modes of the container structure were calculated using the
general finite element analysis software ABAQUS 6.14, and the frequency is between
12.14Hz and 121.51Hz. The structural natural frequency and total modal participation
quality are shown in Table 5.1 and Table 5.2. The mode diagrams are shown in Figure
5.1~5.7.
Table 5.1 Natural frequency of container structure
Mode
3 4 8 11 13 14 15
number
Frequency
15.491 15.520 17.466 18.381 24.365 25.251 25.354
(Hz)
Participation
1.427 2.571 3.495 1.688 -4.441 0.574 0.965
factor
X- X- Y- Z- Partition
Mode Roof Roof
direction direction direction direction Wall
feature warpage warpage
translation translation translation translation warpage
Table 5.2 Total participation quality of the first 200-order modes of the container
The stress cloud diagram of the main components of the container structure is
shown in Figures 5.8-5.41, excluding the snow load. The maximum stress response of
each major component is shown in Table 5.3.
Table 5.3 The maximum stress response of each major component
under combination B (MPa)
Seismic load Static load Combination B
(DW) (SL+Wind) (DW+SL+Wind)
Components
1 1 2 1 1 2 1 1 2
Table 5.5 Maximum stress value of anchor bolt under combination B (MPa)
Seismic load Static load Combination B
Node (DW) Node (SL+Wind) (DW+SL+Wind)
number Normal Shear number Normal Shear Normal Shear
stress σ stress τ stress σ stress τ stress σ stress τ
253 80.83 65.11 253 14.54 4.82 95.37 69.93
Table 5.6 Maximum stress value of transformer’s bolt under combination B (MPa)
Seismic load Static load Combination B
Node (DW) Node (SL+Wind) (DW+SL+Wind)
number Normal Shear number Normal Shear Normal Shear
stress σ stress τ stress σ stress τ stress σ stress τ
36 7.03 2.01 36 1.01 1.29 8.04 3.3
Figure 5.10 Stress cloud diagram of bottom beam under seismic load
Figure 5.11 Stress cloud diagram of top beam under seismic load
Figure 5.12 Stress cloud diagram of bottom side beam under seismic load
Figure 5.13 Stress cloud diagram of top side beam under seismic load
Figure 5.16 Stress cloud diagram of bottom plate under seismic load
Figure 5.18 Stress cloud diagram of door panel under seismic load
Figure 5.19 Stress cloud diagram of partition wall under seismic load
Figure 5.20 Stress cloud diagram of angle steel under seismic load
Figure 5.21 Stress cloud diagram of welded steel sheet under seismic load
Figure 5.22 Stress cloud diagram of anchor bolts under seismic load
Figure 5.23 Stress cloud diagram of bolt of transformer under seismic load
Figure 5.30 Stress cloud diagram of top side beam under combination B
Figure 5.38 Stress cloud diagram of welded steel sheet under combination B
Considering the seismic load and wind load, gradually increase the snow load at
the top of the container from zero. When the snow load at the top of the container
reaches 1.5kPa, the top reinforcing beam basically reaches the limit state. The stress
cloud diagram of the main components of the container structure is shown in Figure
5.42-5.58. The maximum stress response of each major component is shown in Table
5.8.
Table 5.8 The maximum stress response of each major component
under combination D (MPa)
Seismic load Static load Combination D
(DW) (SL+Wind+Snow) (DW+SL+Wind+Snow)
Components
1 1 2 1 1 2 1 1 2
The connection force of the three bolts of the container under combination D is
shown in Table 5.9, and their maximum value of the stress is shown in Table
5.10~5.12.
Table 5.9 Maximum connection force of three bolts under combination D (N)
Table 5.10 Maximum stress value of anchor bolt under combination D (MPa)
Seismic load Static load Combination D
(DW) (SL+Wind+Snow) (DW+SL+Wind+Snow)
Node Node
Normal Shear Normal Shear Normal Shear
number number
stress stress stress stress stress stress
σ τ σ τ σ τ
253 80.83 65.11 253 14.30 4.73 95.13 69.84
Figure 5.46 Stress cloud diagram of bottom side beam under combination D
Figure 5.47 Stress cloud diagram of top side beam under combination D
6. Performance evaluation
Stress of combination
Type of bolt Node number ft 2 f
( ) ( v )2 1 Evaluation result
Ftb Fvb
36 0.0029 pass
32 0.0038 pass
Bolt of transformer
36 0.0029 pass
31 0.0020 pass
Combination D considers the effects of seismic loads, wind loads and snow
loads on the container simultaneously. As the snow load on the top plate gradually
increases, the maximum stress of the top strengthening beam gradually heightens.
When the snow load value reaches about 1.5kPa, the top strengthening beam reaches
the limit state. At this moment, the calculation results of the maximum response stress
of structural components are evaluated by the criteria and limit values given in Tables
4.1 and 4.2. The results show that under the combined conditions of seismic load,
wind load and snow load, when the snow load value is less than or equal to 1.5kPa, all
structural components of the container meet the requirements of ASME code.
Under the premise of not considering seismic load and wind load, when the snow
load value is less than or equal to 4.2kPa, all structural components of the container
meet the corresponding requirements of the ASME code.
附录 1:分析所采用的地震反应谱
附录 2:ASME 规范中的结构部件应力限值
报告编号:C20190515-1030 第 47 页 共 48 页
同济大学土木工程防灾国家重点实验室振动台试验室
State Key Laboratory of Disaster Reduction in Civil Engineering
Tongji University, Shanghai, China
TABLE AA-4321
报告编号:C20190515-1030 第 48 页 共 48 页
TCM Identification Code
CIVIL DESIGN CALCULATION REPORTS
MEMORIA DE CÁLCULO - CIMENTACIONES
DE HORMIGÓN C010-YA-CS-004001
Estas cargas están indicadas para un perno, por lo que para hacer la comprobación se duplicarán las
cargas.
Con estas cargas se ha comprobado en el programa de anclajes Hilti, que los anclajes cumplen y no
se produce la rotura del borde del hormigón.
A continuación, se presentan los resultados de dicho análisis.
MOD-A4-E_Is.00
This document is Tecnimont Chile property, and cannot be used by others for any purpose, without prior written consent
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 1
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
1 Insertar datos
Tipo y tamaño de anclaje: HST3 M20 hef2
Set dinámico/para llenar, o cualquier solución adecuada para rellenar un espacio anular
Profundidad efectiva de anclaje: hef = 101 mm, hnom = 116 mm
Material:
Homologación Nº.: ETA-98/0001
Establecidos I Válidos: 28/07/2016 | -
Prueba: método de cálculo ETAG (Nº 001 Anejo C(2010)) + Sismo (EOTA TR 045)
Categoría de comportamiento sísmico: C2
Tipo de ensayo sísmico: 5.3 a1) Capacidad de diseño
Porcentaje de carga sísmica <=20%: no
Desplazamientos DLS requeridos: Carga a tracción dN,req(DLS) = 6,90 mm, Cortante dV,req(DLS) = 5,20 mm
Fijación a distancia: eb = 0 mm (enrasado); t = 16 mm
Placa de anclaje: lx x ly x t = 160 mm x 200 mm x 16 mm; (Espesor de placa recomendado: no calculado
Perfil: sin perfil
Material Base: no fisurado hormigón, C20/25, fc,cube = 25,00 N/mm2; h = 300 mm
Instalación: taladro hecho con martillo, Condición de instalación: seco
Armadura: sin armadura
sin armadura de borde longitudinal
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 2
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
3 Carga a tracción (ETAG, Anejo C, Sección 5.2.2, EOTA TR 045, Sección 5.6)
Carga [kN] Capacidad [kN] Utilización bN [%] Resultado
Fallo por Acero* N/A N/A N/A N/A
Fallo por extracción* N/A N/A N/A N/A
Rotura por cono de hormigón** N/A N/A N/A N/A
Fallo por fisuración (Splitting)** N/A N/A N/A N/A
* anclaje más solicitado **grupo de anclajes (anclajes en tracción)
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 3
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
5 Avisos
• Los métodos de diseño de anclajes en PROFIS Anchor requieren placas de anclaje rígidas según las normas vigentes (ETAG 001 / Anexo
C, EOTA TR029, etc.). Esto significa que no se considera la re-distribución de la carga en los anclajes debido a deformaciones elásticas de
la placa de anclaje - se supone que la placa de anclaje es suficientemente rígida para no deformarse cuando se somete a la carga de
diseño. PROFIS Anchor calcula el espesor de placa de anclaje mínimo requerido con MEF (Métodod de Elementos Finitos) para limitar la
tensión de la placa de anclaje en base a los supuestos explicados anteriormente. La prueba de que la suposición de la placa base rígida es
válida no es llevada a cabo por PROFIS Anchor. Los datos de entrada y los resultados deben ser verificados de acuerdo a las condiciones
existentes!
• ¡Compruebe la regulación nacional para seleccionar la categoría de comportamiento sísmico adecuada!
• La verificación de la transferencia de cargas al material base debe ser verificada de acuerdo con ETAG(2010) Anexo C (2010) Sección 7!
El programa considera que el mortero se instala bajo la placa de anclaje sin formar burbujas de aire y antes de la aplicación de las cargas.
• El diseño es válido sólo en los casos en que el espacio libre de la perforación no sea mayor al dado en la tabla 4.1. de la ETAG 001, Anexo
C. Para mayores diámetros, de espacio libre de perforación, ver el capítulo 1.1. de la ETAG 001, Anexo C.
• El diseño por el método ETAG (taladros rellenos) asume que no hay espacio libre entre los anclajes y la placa de anclaje que está presente.
Esto materializarse llenando el espacio con mortero de suficiente resistencia a la compresión (por ejemplo, mediante el uso del HILTI set
Sísmico /para llenar) o por otros medios adecuados
• La lista de accesorios en este informe es sólo para información del usuario. En cualquier caso, las instrucciones para el uso, mostrados en
el producto, deben ser seguidas para asegurar una correcta instalación.
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 4
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 5
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
6 Datos de instalación
Placa de anclaje, acero: - Tipo y tamaño de anclaje: HST3 M20 hef2
Perfil: sin perfil Par de apriete de instalación: 0,180 kNm
Diámetro de taladro en chapa: df = 22 mm Diámetro de taladro en material base: 20 mm
Espesor de placa (introducir): 16 mm Profundidad de taladro (min/max): 126 mm
Espesor de placa recomendado: no calculado Mínimo espesor del material base: 200 mm
Método de perforación: Martillo perforador
Limpieza: Se requiere limpieza manual del taladro
80 80
50
100
2
100
x
100
1
50
80 80
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
www.hilti.es Profis Anchor 2.7.3
Empresa: Página: 6
Proyectista: Proyecto: PV LA QUINTA
Dirección: Sub Proyecto I Pos. No.: Pernos de Anclaje
Teléfono I Fax: | Fecha: 30/01/2023
E-mail:
7 Observaciones;comentarios
• Toda la información y todos los datos contenidos en el software sólo se refieren a la utilización de los productos Hilti y están fundados en
principios, fórmulas y normativas de seguridad conformes a las consignas técnicas de Hilti y en instrucciones de operación, montaje,
ensamblaje, etc., que el usuario debe seguir exhaustivamente. Todas las cifras que en ellos constan son medias; por lo tanto, se deben
realizar pruebas específicas de utilización antes de la utilización del producto Hilti aplicable. Los resultados de los cálculos ejecutados
mediante el software reposan básicamente en los datos que usted introduce en el mismo. Por lo tanto, es usted el único responsable de la
inexistencia de errores, de le exhaustividad y la pertinencia de los datos introducidos por usted mismo. Asimismo, es usted el único
responsable de la verificación de los resultados del cálculo y de la validación de los mismos por un experto, en especial en lo referente al
cumplimiento de las normas y permisos aplicables previamente a su utilización, en particular para su aplicación. El software sólo sirve de
ayuda para la interpretación de las normas y permisos sin ninguna garantía con respecto a la ausencia de errores, la exactitud y la
pertinencia de los resultados o su adaptación a una determinada aplicación.
• Debe usted tomar todas las medidas necesarias y razonables para impedir o limitar los daños causados por el software. En especial, debe
usted tomar sus disposiciones para efectuar regularmente una salvaguarda de los programas y de los datos y, de ser aplicable, ejecutar las
actualizaciones regularmente facilitadas por Hilti. Si no utiliza la función AutoUpdate del software, debe usted comprobar que en cada caso
usted utiliza la versión actual y puesta al día del software, ejecutando actualizaciones manuales a través del Sitio Web Hilti. Hilti no será
considerada como responsable por cualquier consecuencia, tal y como la necesidad de recuperar necesidades o programas perdidos o
dañados, que se deriven de un incumplimiento, por su parte, de sus obligaciones.
¡La introducción de datos y resultados deben verificarse, asegurando su correspondencia con las condiciones existentes y asegurando su verosimilitud!
PROFIS Anchor (c) 2003-2009, Hilti AG, FL-9494 Schaan. Hilti es una marca registrada de Hilti AG, Schaan
HST3 (-R) sujeto a:
Tamaño de anclaje M8 M10 M12 M16 M20 M24
Martillo de perforación*
Perforación de diamante*
DD-30W, DD-EC1
Herramienta de ajuste*
Herramienta de ajuste HS-SC -
- TE-CD, TE-YD