Está en la página 1de 3

MATRIZ DE INVESTIGACIÓN Traducir en ingles

BIOLOGÍA 2023

Título Retention and removal of hydrocarbons present in wastewater using sugarcane bagasse.

To what extent is the use of sugarcane bagasse effective


Pregunta de
Investigación in the retention and removal of hydrocarbons in
wastewater?
 Observe the absorption capacity of
sugarcane bagasse
Objetivos
 Measure the percentage of effectiveness of
sugarcane in the removal of hydrocarbons
Sugarcane bagasse in its modified form is an efficient
Hipótesis measure for the removal of hydrocarbons such as
petroleum in wastewater
the amount of hydrocarbons in the
water
Variable Independiente ¿Cómo se modifica? / ¿Cómo se manipula?
Perform defined concentrations of hydrocarbons in the
water
Adsorption capacity of sugarcane
bagasse
Variable Dependiente ¿Cómo se mide / ¿Cómo se cuantifica?
Defined concentrations of sugarcane
bagasse will be carried out
¿Cómo influye? / ¿Por qué se debe ¿Cómo se controla?
Variables Controladas
controlar?
Its influence on
which it will be
possible to
determine the
Amount of water percentage of Defined measures
hydrocarbons
present in it during
and at the end of
the process
The sugarcane The influence of its Defined measures
bagasse that is use on the
used reduction of
hydrocarbons in
wastewater and to
measure the
amount of SCB
needed for this
process
It influences the
process to be
Hydrocarbons measured, how it
Defined measures
present in water is adsorbed and
how it can be
removed
Diseño de Reactivos / insumos
Materiales / equipos
investigación
6 beakers of 600ml
5 ramrod Sugarcane bagasse
1 pipette Wáter
7 cylinder of 500ml Hidrocarburos (diésel y aceite
vegetal)
1 Specimen of 100ml

Procedimientos
1. Primero colocamos 400ml de agua en los vasos precipitados utilizando una
probeta de 600ml.(6 muestras)
2. Añadimos 100ml de diésel (3 muestras),aceite vegetal(3 muestras) en los vasos
precipitados que ya contienen agua (6 muestras)
3. Molemos una porción del bagazo de caña y pesamos en total 120g
Diseño de
4. Colocamos 10g en el primer vaso, 20g en el segundo, 30g en el tercero, esto
investigación
tanto en los que contienen diesel y aceite vegetal.
5. Con las baquetas se removerán las concentraciones de los 6 contenedores
durante 1 min. Para su homogenización en la mescla.
6. Se dejara reposar para posteriormente filtrarse uno por uno y pasarlos a 6
probetas de 500ml previamente enumeradas
7. Se deja reposar en las probetas para posteriormente medir la diferencia de
hidrocarburos en el agua al inicio del experimento y después de este

Seguridad, ética e impacto ambiental

Se utilizan guantes, bata, gafas y mascarilla debido a la utilización de hidrocarburos que


podrían ser dañinos para la salud de la persona si esta llegara a inhalarla o ingerirla.

BIBLIOGRAFIA https://link.springer.com/article/10.1007/s11270-023-06210-1

https://www.revistaseguridadminera.com/emergencias/derrame-de-hidrocarburos-tecnicas-
para-su-control-y-contencion/
https://www.redalyc.org/pdf/370/Resumenes/Resumen_37019377003_1.pdf

https://www.sciencedirect.com/science/article/pii/S2215017X23000255

También podría gustarte