Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ESTANDAR DE INGENIERIA
PDVSA N TITULO
APROB. Ral Prez FECHA DIC.92 APROB. Ramn Rodrguez FECHA DIC.92
Index
1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 PIPE SUPPORT MARKING AND LOCATION ON
ORTHOGRAPHIC DRAWINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 DRAWINGS NUMBERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4 STANDARD PIPE SUPPORT MARK NUMBERS . . . . . . . . . . . . . . . 5
5 SPECIFIC PIPE SUPPORT MARK NUMBERS . . . . . . . . . . . . . . . . . 9
6 PIPE SUPPORT SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 ........................................................... 14
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 2
.Men Principal Indice manual Indice volumen Indice norma
1 GENERAL
1.1 All supports are assigned mark numbers which indicate whether the support is a
standard support or a specific support that must be detailed.
1.2 A standard support mark indicates a standard type component which can be
fabricated from a Design Standard.
1.3 A specific support mark indicates a support that shall be detailed on a standard
detail blank, design Std. PDVSA 10606.2.709 as a job drawing.
1.4 On a job consisting for piping orthographic arragement drawings and piping
isometrics the pipe support marks shall be placed on the orthographic
arrangement drawings.
1.5 On a job consisting of a model and piping isometrics the pipe supports shall be
marked on the piping isometric. If there are not isometrics the pipe support marks
shall be placed on the model.
1.6 Trunnions and other welded pipe support attachments shall be marked on the
piping isometrics per job drawing AXXXX0045, Desing Standard PDVSA
10606.2.201. The trunnion is marked on the orthographic drawing only as TXO
(Ex: T3O for 3 Nom. Dia. trunnion).
2.1 Duplicated mylars of the piping orthographic drawings shall be used to mark the
location of pipe support.
2.2 These duplicated orthographic shall use the same drawing numbers as the piping
drawing except that the number will be followed by the letters to PS (Ex: Piping
Drawing EXXXX06316, becomes pipe support drawing EXXXX06316PS).
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 3
.Men Principal Indice manual Indice volumen Indice norma
2.3 The drawings with the pipe support marks will also be labled with the following:
2.4 Piping which does not terminate on a particular orthographic drawing shall have
pipe support mark numbers shown on the rigth hand and/or bottom match lines
of the orthographic drawing.
2.5 No pipe support marks shall be shown on left hand and/or top match lines of an
orthographic drawing unless unavoidable due to termination of a line.
3 DRAWINGS NUMBERS
3.1 The assigned drawing numbers for pipe supports are 435 thru 460.
3.2 All issued pipe supports job drawing and standard shall be listed on the Pipe
Support Issue Index, job drawings AXXXXXXX451, Desing Std. PDVSA
10606.2.701.
3.3 All specific supports shall be indexed on an A (216 mm x 279 mm) size index job
drawing assigned to the type or support, Design Std. PDVSA 10606.2.702 thru
10606.2.708.
3.4 All specific supports shall be detailed on a standard detail blank A (216
mm x 279 mm) size job drawing, Design Std. PDVSA 10606.2.709, numbered
according to the type of support, revision and sequential sheet number.
3.5 Standard pipe shoes, shields, cold support cradles, guides, anchors, directional
stops, modified standard shoes and bulk order springs shall be listed on summary
lists, job drawings AXXXXXX455 thru AXXXXXX458 and AXXXXXX435,
Design Stds. PDVSA 10606.2.721 thru 10606.2.725.
3.6 Pipe Support Vessel Clips shall be detailed on a standard detail blank B (279 mm
x 431 mm) size job drawing Design Std. PDVSA 10606.2.851 for each vessel
seperately and sequentially numbered.
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 4
.Men Principal Indice manual Indice volumen Indice norma
3.7.2 The A451 series of index list job drawings are assigned as follows:
AXXXXYY451 Pipe Support Issue Index Design Std 10606.2.701
AXXXXYY451A Index ListAnchors .702
AXXXXYY451DS Index ListDirectional Stops .703
AXXXXYY451G Index ListGuides .704
AXXXXYY451H Index ListHangers .705
AXXXXYY451MS Index ListMiscellaneuos Steel
Supports .706
AXXXXYY451RS Index ListResting Supports .707
AXXXXYY451SH Index ListSprings .708
3.7.3 The A452 series of detail job drawings are assigned to supports requiring
attachment to vessels as follows:
AXXXXYY452A Anchors on Vessel Piping
AXXXXYY452DS Directional Stops on Vessel Piping
AXXXXYY452G Guides on Veseel Piping
AXXXXYY452H Hangers on Veseel Piping
AXXXXYY452RS Resting Supports for Veseel Piping
AXXXXYY452SH Spring for Vessel Piping
3.7.4 The A453 series of detail job drawings are assigned to supports that are not
attached to vessels or at grade as follows:
AXXXXYY453A Anchors
AXXXXYY453DS Directional Stops
AXXXXYY453G Guides
AXXXXYY453H Hangers
AXXXXYY453MS Miscellaneuos Steel
AXXXXYY453RS Resting Supports
AXXXXYY453SH Springs
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 5
.Men Principal Indice manual Indice volumen Indice norma
3.7.5 The A454 series of detailed job drawings are assigned to supports at grade as
follows:
AXXXXYY454A Anchors at Grade
AXXXXYY454DS Directional Stops at Grade
AXXXXYY454G Guides at Grade
AXXXXYY454H hangers at Grade
AXXXXYY454MS Miscellaneous Steel Supports
AXXXXYY454RS Resting Supports at Grade
AXXXXYY454SH Spring Supports at Grade
3.7.6 The numbers assigned to summary list job drawings are as follows:
AXXXXYY435 Spring List (Bulk order) Desing Std. 10606.2.725
AXXXXYY455 Summary ListStandard .721
Anchors and Directional
Stops
AXXXXYY456 Summary List for Pipe Shoes, .722
Shields and Cradles
AXXXXYY457 Summary ListStandard .723
Guide Supports
AXXXXYY458 Summary ListStandard .724
Supports
3.7.7 The BXXXXYY441 job drawing, Desing Std. PDVSA 10606.2.851 is assigned
to Pipe Support Vessel Clips and issued to the vessel fabricator for supply of
welded clips to the vessel for pipe supports.
3.7.8 The XXXX and YY for the job drawing number represent the job number and job
area number, respectively. (EX. for job number 9900 area 1200, drawing 453A,
Revision 1, sheet 5, the drawing number would be A99012453A1. Sheet 5.
4.2 The Design Standard drawing number consists of a nine digit number divided into
four parts. The 1 preceding the standard indicates a Bloomfield Standard. The
next four digits, 0606, indicates the Design Engineering Dept. (06) and Piping
Engineering Group (06). The .2 indicate the drawing is a Design Standard.
The last three digits indicate the Design Standard. (Ex. 10606.2.261 is the
Design Standard for STD AnchorBare Pipe 1 thru 24).
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 6
.Men Principal Indice manual Indice volumen Indice norma
4.3 Standard mark numbers, description of the Standard and Design Standard
drawing numbers are listed in Table 1 Standard Pipe Supports Marks.
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 7
.Men Principal Indice manual Indice volumen Indice norma
CRS1 THRU CRS7 INSULATION SHIELDS FOR SMALL BORE PIPE 10606.2.231
GH1 THRU GH7 GUIDE FOR HOT INSULATED SMALL BORE PIPE 10606.2.282
UBS1 THRU UBS7 GUIDE FOR HOT INSUL RISERS 2 & SMALLER 10606.2.290
SGS8 THRU SGS13 STRAP GUIDE FOR ANTISWEAT INSUL RISERS 10606.2.292
AGC2.5 THRU AGC25 STANDARD ANCHOR FOR COLD INSUL SUPPORT 10606.2.604
5.2 The ALPHA portion of the number designates the type of support as shown in
Table 2 Specific Support Type.
GUIDE (LATERAL) G
HANGER H
RESTING SUPPORT RS
SPRING HANGER SH
5.3 The five digit NUMERIC portion designates the job area identification by the first
two digits and the sequential support number by the last threee digits as
illustrated.
SYMBOL
RS3017
SEQUENTIAL SUPPORT NUMBER
SPECIFIC SUPPORT TYPE LAST THREE DIGITS
AREA IDENTIFICATION
(eg 3000) FIRST TWO DIGITS
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 10
.Men Principal Indice manual Indice volumen Indice norma
5.4 The specific support shall be detailed on a standard detail blank, Design Std.
PDVSA 10606.2.709 and assigned a job drawing number per paragraph 3.6 (Ex.
For job N 9900, area 3000, specific support RS30107 detailed on sheet 5,
revision 3 and assigned series 451RS, the job darwing number is
A990030451RS3 SH 5).
5.5 All dimensions and other pertinent data for the specific mark number must be
shown on the job drawing for the support.
6.2 Bare pipe resting directly on existing steel requiring no additional type of support
shall not have a pipe support symbol.
ESTANDAR DE INGENIERIA PDVSA 10606.2.051
REVISION FECHA
PDVSA PIPE SUPPORT DRAWING
AND MARKING SYSTEM 0 DIC.92
Pgina 11
.Men Principal Indice manual Indice volumen Indice norma
UBCXX
STD GUIDE FOR COLD INSULATED RISER WITH TYPE D 10606.2.606
or CRADLE
STRXX
7 For additional notes on pipe support fabrication and Material of construction should
be ASTM A36, unless otherwise specified, Pipe Supports: Prefabricated and
PDVSA HG251, Pipe Supports Design Criteria.