Documentos de Académico
Documentos de Profesional
Documentos de Cultura
AUTOR (ES):
Núñez Calderón, Wilmer Anderson (ORCID: 0000-0002-3863-7221)
Soto Tantalean, Elver (ORCID: 0009-0001-3528-9110)
Sarango Muñoz, Luis Jeinner (ORCID: 0000-0002-2847-5070)
Viera Talledo, Nilton Paúl (ORCID: 0009-0002-9469-1318)
Nuñez Delgado Roder Ivan (ORCID: 0000-0003-7621-7249)
ASESOR:
Dr. Arbulu Ballesteros, Marcos Agustín (ORCID: 0000-0000-0000-0000)
LÍNEA DE INVESTIGACIÓN:
PIURA – PERÚ
2023
Índice
Carátula ……………………………………………………………………….…………… i
Índice...........................................................................................................................ii
Resumen.....................................................................................................................ii
Abstract......................................................................................................................iii
I. INTRODUCCIÓN....................................................................................................1
II. MÉTODO................................................................................................................2
2.1. Operacionalización de variables................................................................2
2.2. Población, muestra y muestreo.................................................................2
2.3. Técnicas e instrumentos de recolección de datos.....................................2
2.4. Método de análisis de datos......................................................................2
2.5. Consideraciones éticas..............................................................................2
III. RESULTADOS Y DISCUSIÓN............................................................................3
IV. CONCLUSIONES................................................................................................4
REFERENCIAS..............................................................................................................5
ANEXOS........................................................................................................................6
Resumen
Palabras claves
Seguridad, análisis, predominancia, estadística, proceso constructivo, elemento
structural.
Abstract
The objective of this statistical report is to analyze the type of confined masonry as a
structural element in the houses of the city of Piura, a reference of 100 projects was
taken, of which 25 will be taken as a sample, they were chosen at the discretion and
convenience of the researchers. The information obtained was regarding the mode of
construction processes, useful life, the information collected will be from visits to
works, by the researchers using the observation sheet as support.
The analyzes of those in charge of executing the projects were also considered, the
data was taken and analyzed by dimensions; as structural elements reaching the
conclusion that confined masonry is one of the best alternatives for the execution of
works in the north of the country, which is predominant in 80%, however it was also
noted that there are several types of masonry that prevails in time, in the same way
the acceptance of each of them is observed, therefore the following conclusion
was reached.
Confined masonry provides us with good structural elements, which provide
confidence, security and durability over time.
Keywords
Security, analysis, predominance, statistics, construction process, structural
element.
I. INTRODUCCIÓN
2.2.1 Población
2.2.2 Muestra
2.2.3 Muestreo
Recolección de datos:
- Técnica de campo
Se realizan calicatas para extraer muestras del suelo usando diversas herramientas.
- Técnica de laboratorio
Se realizaron estudios al terreno los requerimientos para poder diseñar, entre ellos, un
análisis granulométrico mediante tamizado, limite líquido y plástico sales solubles,
ensayo de corte directo y contenido de humedad, teniendo como objetivo poder
clasificar el lugar de estudio y obtener la información necesaria.
- Técnica de gabinete
Procesados de datos: analizamos la información que obtenemos del laboratorio en el
software y posteriormente realizamos una memoria de cálculo detallado y planos para
la edificación del proyecto propuesto.
-Estructuración de la edificación
-Metrado de cargas
-Parámetros de análisis y diseño
-Modelamiento de la estructura en Etabs
-Modelamiento de la estructura de albañilería armada
-Análisis dinámico
-Modelamiento de la estructura de albañilería Confinada
-Discusión de los resultados y comparación de resultados
II.4. Método de Análisis de Datos.
Validez y confiabilidad