Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Juan Camilo Araque , Camilo Ardila1, Silvia Marcela Bueno1, Yerson Stiven Galindo1, Joel Isaac Quinto1,
1
David Ospina1
25 de Septiembre de 2018
OPUS II GRUPO 1
MsC Roberto Balda Ayala
Palabras clave: Sedimentación, partícula discreta, velocidad, densidad, gravedad, flocs, flotación.
Abstract: In this report we present the procedure carried out to carry out the sedimentation test for
different types of discrete particles: fine sand, coarse sand and flocs, in order to determine the
sedimentation rate, on the one hand theoretically and experimentally by observing the time a discrete
measure of known size takes at a distance from a water column. The influence of temperature on
sedimentation was taken into account when performing the test with the medium liquid and also with
an increase in temperature. In addition, it is necessary to take into account the most important factors
in this process, such as the density and diameter of the discrete particle, the density of the water, the
viscosity of the water and the temperature of the water.
Key words: Sedimentation, discrete particle, velocity, density, gravity, flocs, flotation.
Bibliografía
Ayala, R. B. (s.f.). Prueba de
sedimentación. Bogotá: Universidad
de la Salle.
Organización Panamericana de la
salud. (2005). Guía para el diseño
desarenadores y sedimentadores.
Lima.
Pérez, J. (s.f.). Avances en
sedimentación. Obtenido de
Biblioteca virtual de desarrollo
sostenible y salud ambiental:
http://www.bvsde.paho.org/sde/ops-
sde/bvsde.shtml
Yactayo, V. M. (2004).
Sedimentación. En O. P. salud,
Tratamiento de agua para consumo
humano. Plantas de filtración rápida.
Tomo II (págs. 1-58). Lima: Los
Pinos.