Documentos de Académico
Documentos de Profesional
Documentos de Cultura
2 Reactores Quimicos en Aspen Plus PDF
2 Reactores Quimicos en Aspen Plus PDF
Reactores Químicos en Aspen
Plus
Diplomado en Energía
Modulo V
22 de Marzo del 2013 UAM‐Cuajimalpa
Asociación Nacional de la Industria Química
MODELO
REACTORES QUIMICOS
DESCRIPCIÓN PROPÓSITO UTILIDAD
• No es necesario especificar calores de reacción, porque Aspen Plus usa la entalpía
elemental del estado de referencia de calor de formación del componente.
Asociación Nacional de la Industria Química
1
23/03/2013
Modelos de Reactores en Aspen Plus
Model Stoichiometry Kinetics Rigorous Feed
RSTOIC Yes No No Any
RYIELD No No No Any
REQUIL No No No Any
RGIBBS No No No Any
RBATCH Yes Yes Yes 1
RCSTR Yes Yes Yes Any
RPLUG Yes Yes Yes 1
Asociación Nacional de la Industria Química
RSTOIC
Use RStoic to model a reactor when:
∙ Reaction kinetics are unknown or unimportant and
∙ Stoichiometry and the molar extent or conversion
is known for each reaction
RStoic can model reactions occurring simultaneously
or sequentially. In addition,
RStoic can perform product selectivity and heat of
reaction calculations.
Material Streams
Inlet At least one material stream
Outlet One product stream
One water decant stream (optional)
Heat Stream
Inlet Any number of heat streams (optional)
RStoic uses the sum of the inlet heat streams as the heat duty
specification, if
you do not specify an outlet heat stream.
Outlet One heat stream (optional)
The value of the outlet heat stream is the net heat duty (sum of the inlet
heat
streams minus the calculated heat duty) for the reactor.
Asociación Nacional de la Industria Química
2
23/03/2013
RYIELD
Use RYield to model a reactor when:
REQUIL
Use REquil to model a reactor when:
3
23/03/2013
RGIBBS
RGibbs uses Gibbs free energy minimization with phase
splitting to calculate equilibrium. RGibbs does not require
that you specify the reaction stoichiometry.
Asociación Nacional de la Industria Química
RCSTR
Asociación Nacional de la Industria Química
4
23/03/2013
RPLUG
RPlug is a rigorous model for plug flow
reactors. RPlug assumes that perfect mixing
occurs in the radial direction and that no
mixing occurs in the axial direction. RPlug can
model one‐, two‐, or three‐phase reactors. You
can also use RPlug to model reactors with
coolant streams (co‐current or counter‐
current). RPlug handles kinetic reactions, Material Streams
including reactions involving solids. You must Inlet One material feed stream
know the reaction kinetics when you use One coolant stream (optional)
RPlug to model a reactor. You can provide the Outlet One material product
stream
reaction kinetics through the built‐in Reactions
One coolant stream (optional)
models or through a user‐defined Fortran Heat Streams
subroutine. Inlet No inlet heat streams
Outlet One heat stream (optional)
for the reactor heat duty. Use the
heat outlet
stream only for reactors without a
coolant stream.
Asociación Nacional de la Industria Química
RBATCH
RBatch is a rigorous model for batch or
semi‐batch reactors. Use RBatch when you
know the kinetics of the reactions taking
place. You can specify any number of
continuous feed streams. A continuous
vent is optional. The reaction runs until it
reaches a stop criterion that you specify.
Batch operations are unsteady‐state
Material Streams
processes. RBatch uses holding tanks and Inlet One batch charge stream
your specified cycle times to provide an (required)
interface between the discrete operations One or more continuous feed
of the batch reactor and the continuous streams for semi‐batch reactors
(optional)
streams used by other models. Outlet One product stream
RBatch can model one‐, two‐, or three‐ (required)
phase reactors. One vent stream for semi‐batch
reactors (optional)
Heat Streams
Inlet No inlet heat streams
Outlet One heat stream (optional)
Asociación Nacional de la Industria Química
5
23/03/2013
Resumen
• Hay 7 modelos de reactor incorporados en Aspen Plus; RSTOIC, RYIELD, REQUIL,
RGIBBS, RPLUG, RCSTR y RBATCH. RPLUG, RCSTR y RBATCH modelos son rigurosos de
los reactores de flujo pistón (tubulares), CSTR y por lotes, respectivamente.
• RSTOICH se debe utilizar en los casos en que la estequiometría se conoce, pero la
cinética de la reacción es o desconocida o poco importante.
• Si se dan los dos casos, la cinética de reacción y loa estequiometría son desconocidas
entonces deben ser usarse RYIELD en las simulaciones.
• Para cálculos de una sola fase en equilibrio químico fase de equilibrio o equilibrio
químico y de fases simultáneos la elección del modelo de reactor de debe ser REQUIL o
RGIBBS.
• REQUIL basa sus cálculos en la solución simultánea de la estequiometria y el equilibrio
de fases, mientras que RGIBBS resuelve su modelo minimizando la energía libre de
Gibbs.
• Todos los modelos de reactores, excepto RPLUG y RBATCH pueden tener cualquier
número de corrientes de alimentación. Estas corrientes se mezclan internamente.
• Los modelos rigurosos pueden incorporar las cinéticas tipo ley de la potencia o
Langmuir‐Hinschelwood‐Hougen‐Watson (incluídas en Aspen) o cinéticas especificados
por el usuario.
• Estas se pueden definir en subrutinas escritas en Fortran o en hojas de cálculo de Excel.
Asociación Nacional de la Industria Química
Velocidades de reacción
Asociación Nacional de la Industria Química
6
23/03/2013
CINETICA DE RECCIONES DE LANGMUIR‐
HINSHELWOOD‐HOUGEN‐WATSON (LHHW)
Asociación Nacional de la Industria Química