Documentos de Académico
Documentos de Profesional
Documentos de Cultura
MEMORIA
DESCRIPTIVA
ESTRUCTURAS
ESPECIALIDAD ESTRUCTURAS
PROYECTO:
“MEJORAMIENTO DEL SERVICIO EDUCATIVO DE LAS CARRERAS DE
CONTABILIDAD, ENFERMERIA TECNICA, COMPUTACION E INFORMATICA,
INDUSTRIA ALIMENTARIA Y PRODUCCIÓN AGROPECUARIA DEL ISEPA, PROVINCIA
DE MELGAR – PUNO”
ÍNDICE GENERAL
1. GENERALIDADES ...................................................................................... 4
1.1. DATOS DEL PROYECTO ......................................................................................... 4
1.2. ubicación .................................................................................................................... 4
1.3. ANTECEDENTES ...................................................................................................... 5
2. INTRODUCCIÓN ........................................................................................ 6
2.1. OBJETIVO ................................................................................................................. 6
2.2. ALCANCE .................................................................................................................. 6
3. Descripción General del Proyecto ........................................................... 7
3.1. PLANOS DEL PROYECTO ....................................................................................... 7
3.2. PROGRAMACIÓN ARQUITECTÓNICA DEL PROYECTO ..................................... 12
3.3. Consideraciones deL Análisis Y DISEÑO Estructural ............................................. 12
3.4. NORMAS APLICABLES .......................................................................................... 13
3.5. PARÁMETROS DE ANÁLISIS Y DISEÑO ESTRUCTURAL ................................... 14
3.5.1. CAPACIDAD PORTANTE DEL SUELO ........................................................... 14
3.5.2. CONSIDERACIONES SISMICAS .................................................................... 14
3.5.3. MATERIALES ................................................................................................... 15
3.5.4. PREDIMENSIONAMIENTO DE ELEMENTOS ESTRUCTURALES. ............... 16
PREDIMENSIONAMIENTO DE estructuras metalicas ...................................................... 16
PREDIMENSIONAMIENTO DE LOSAS ............................................................................ 17
Predimensionamiento de vigas .......................................................................................... 17
Predimensionamiento de Columnas .................................................................................. 18
PREDIMESIONAMIENTO DE CIMENTACIONES - ZAPATAS. ........................................ 18
Predimensionamiento de Escaleras ................................................................................... 18
RECUBRIMIENTOS ........................................................................................................... 18
4. CONCLUSIONES Y RECOMENDACIONES ............................................... 19
ILUSTRACIONES
Ilustración 1: Ubicación de la Institución Educativa. ................................................................ 4
Ilustración 2: Ubicación de los bloques proyectados. .............................................................. 5
1. GENERALIDADES
1.1. DATOS DEL PROYECTO
Nombre del proyecto : “MEJORAMIENTO DEL SERVICIO EDUCATIVO DE
LAS CARRERAS DE CONTABILIDAD, ENFERMERIA
TECNICA, COMPUTACION E INFORMATICA,
INDUSTRIA ALIMENTARIA Y PRODUCCIÓN
AGROPECUARIA DEL ISEPA, PROVINCIA DE
MELGAR – PUNO”
Nombre de la UEI : Gobierno Regional de Puno
1.2. UBICACIÓN
El terreno de la institución educativa se ubica en:
Región : Puno
Provincia : Melgar
Distrito : Ayaviri
Centro Poblado : Balsapata
Región Natural : Sierra
Zona : Urbana
1.3. ANTECEDENTES
El Instituto Superior de Educación Público Ayaviri inicia sus actividades el 20 de Agosto
de 1981, en virtud a la R.D. Nº 0539, que autoriza la apertura como filial de la ESEP
de II ciclo “José Antonio Encinas” de la ciudad de Puno, con dos áreas de formación
profesional: Agropecuaria con las especialidades de Producción Pecuaria y Producción
Agrícola y Económica con las especialidades de Administración de Negocios y
Contabilidad Empresarial.
En el año de 1994, mediante la R.D. Nº 019-94 ED, obtiene la revalidación de las dos
Áreas de Formación Profesional, como consecuencia del proceso de evaluación de los
Institutos Superiores efectuado por el Ministerio de Educación; a partir del 2006 se
ofrece la carrera profesional de Educación Para el Trabajo, especialidad Industria
Alimentaria en el Área de Formación Magisterial; a partir de 2012 nuevamente
ofertamos la Especialidad de Matemática en Formación Magisterial, con el DCBN
(Diseño Curricular Básico Nacional).
2. INTRODUCCIÓN
2.1. OBJETIVO
La presente memoria descriptiva corresponde resumen general del modelamiento
sísmico, análisis y diseño estructural de todos los bloques proyectados teniendo en
consideración el diseño arquitectónico del proyecto: “MEJORAMIENTO DEL
SERVICIO EDUCATIVO DE LAS CARRERAS DE CONTABILIDAD, ENFERMERIA
TECNICA, COMPUTACION E INFORMATICA, INDUSTRIA ALIMENTARIA Y
PRODUCCIÓN AGROPECUARIA DEL ISEPA, PROVINCIA DE MELGAR – PUNO”
elaborado conforme con la normatividad estructural vigente y en base a los planos
arquitectónicos propuestos, debidamente compatibilizados.
2.2. ALCANCE
El proyecto estructural desarrollado se basó en proponer las medidas óptimas más
adecuadas para el buen desempeño de todos los bloques del proyecto, sometidas a
cargas de gravedad y a solicitaciones sísmicas. Estas edificaciones han sido
BLOQUE/NOMBRE
N° LAMINA NOMBRE DE PLANO
DE BLOQUE
E-06 PLANTA DE LOSA DEL SEGUNDO NIVEL Y ESTRUCTURA METALICA
E-07 DETALLE DE ESTRUCTURA METALICA Y MOJINETE
E-08 DETALLE DE PORTICO 1/8
E-09 DETALLE DE PORTICO 2/8
E-10 DETALLE DE PORTICO 3/8
E-11 DETALLE DE PORTICO 4/8
E-12 DETALLE DE PORTICO 5/8
E-13 DETALLE DE PORTICO 6/8
E-14 DETALLE DE PORTICO 7/8
E-15 DETALLE DE PORTICO 8/8
E-16 DETALLE DE VIGAS 1/9
E-17 DETALLE DE VIGAS 2/9
E-18 DETALLE DE VIGAS 3/9
E-19 DETALLE DE VIGAS 4/9
E-20 DETALLE DE VIGAS 5/9
E-21 DETALLE DE VIGAS 6/9
E-22 DETALLE DE VIGAS 7/9
E-23 DETALLE DE VIGAS 8/9
E-24 DETALLE DE VIGAS 9/9 Y DETALLE DE ESCALERAS
E-01 PLANTA DE ZAPATAS,VIGAS DE CIMENTACION Y SOBRECIMIENTOS
E-02 PLANTA DE LOSAS Y DETALLES
E-03 PLANTA DE VIGAS Y DETALLES DE CIMIENTOS
E-04 PLANTA DE LOSAS, TECHOS Y DETALLES DE CIMIENTOS
E-05 DETALLE DE COLUMNAS, VIGAS, EMPALMES Y TRASLAPES
E-06 DETALLES DE TIJERALES, ESCALERAS, PLACA PL-1 Y MESA DE CONCRETO
E-07 DETALLE DE PORTICOS 1/8
E-08 DETALLE DE PORTICOS 2/8
E-09 DETALLE DE PORTICOS 3/8
E-10 DETALLE DE PORTICOS 4/8
E-11 DETALLE DE PORTICOS 5/8
BLOQUE 3 (ENFERMERIA E-12 DETALLE DE PORTICOS 6/8
TECNICA) E-13 DETALLE DE PORTICOS 7/8
E-14 DETALLE DE PORTICOS 8/8
E-15 DETALLE DE VIGAS 1/11
E-16 DETALLE DE VIGAS 2/11
E-17 DETALLE DE VIGAS 3/11
E-18 DETALLE DE VIGAS 4/11
E-19 DETALLE DE VIGAS 5/11
E-20 DETALLE DE VIGAS 6/11
E-21 DETALLE DE VIGAS 7/11
E-22 DETALLE DE VIGAS 8/11
E-23 DETALLE DE VIGAS 9/11
E-24 DETALLE DE VIGAS 10/11
BLOQUE/NOMBRE
N° LAMINA NOMBRE DE PLANO
DE BLOQUE
BLOQUE/NOMBRE
N° LAMINA NOMBRE DE PLANO
DE BLOQUE
E-17 DETALLE DE VIGAS 1/10
E-18 DETALLE DE VIGAS 2/10
E-19 DETALLE DE VIGAS 3/10
E-20 DETALLE DE VIGAS 4/10
E-21 DETALLE DE VIGAS 5/10
E-22 DETALLE DE VIGAS 6/10
E-23 DETALLE DE VIGAS 7/10
E-24 DETALLE DE VIGAS 8/10
E-25 DETALLE DE VIGAS 9/10
E-26 DETALLE DE VIGAS 10/10 Y DETALLE DE ESCALERAS
E-01 PLANTA DE ZAPATAS,VIGAS DE CIMENTACION Y SOBRECIMIENTOS
E-02 PLANTA DE CIMIENTOS , SOBRECIMIENTOS Y DETALLES DE CIMENTACION
E-03 PLANTA DE LOSAS, VIGAS Y COLUMNETAS
E-04 PLANTA DE LOSAS, VIGAS Y COLUMNETAS
E-05 PLANTA DE LOSAS, DETALLES DE COLUMNAS Y VIGAS
E-06 PLANTA DE TECHOS, DETALLES DE TIJERALES Y ANCLAJES
E-07 PLANTA DE TECHOS, DETALLES DE TIJERALES Y ANCLAJES
E-08 DETALLE DE PLACAS, ESCALERAS, MESAS DE CONCRETO Y EMPALMES
E-09 DETALLE DE PORTICOS 1/8
E-10 DETALLE DE PORTICOS 2/8
E-11 DETALLE DE PORTICOS 3/8
E-12 DETALLE DE PORTICOS 4/8
E-13 DETALLE DE PORTICOS 5/8
E-14 DETALLE DE PORTICOS 6/8
BLOQUE 6
(ADMINISTRACION, E-15 DETALLE DE PORTICOS 7/8
BIBLIOTECA Y CAFETIN)
E-16 DETALLE DE PORTICOS 8/8
E-17 DETALLE DE VIGAS 1/13
E-18 DETALLE DE VIGAS 2/13
E-19 DETALLE DE VIGAS 3/13
E-20 DETALLE DE VIGAS 4/13
E-21 DETALLE DE VIGAS 5/13
E-22 DETALLE DE VIGAS 6/13
E-23 DETALLE DE VIGAS 7/13
E-24 DETALLE DE VIGAS 8/13
E-25 DETALLE DE VIGAS 9/13
E-26 DETALLE DE VIGAS 10/13
E-27 DETALLE DE VIGAS 11/13
E-28 DETALLE DE VIGAS 12/13
E-29 DETALLE DE VIGAS 13/13 Y DETALLES GENERALES
E-01 PLANTA DE CIMIENTOS
BLOQUE 7 E-02 PLANTA DE ESTRUCTURA METALICA
(PLATAFORMAS
DEPORTIVAS) E-03 DETALLE DE LAS JUNTAS DE PAVIMENTO
E-04 DETALLE DE LOS PILARES Y VIGAS
BLOQUE/NOMBRE
N° LAMINA NOMBRE DE PLANO
DE BLOQUE
E-05 DETALLE DE ESTRUCTURA METALICA
E-01 PLANTA DE CIMIENTOS Y SOBRECIMIENTOS
E-02 PLANO DE LOSA ALIGERADA
E-03 DETALLE DE PORTICO 1/5
DETALLES GENERALES
E-01 PLANTA DETALLE DE TANQUE CISTERNA
E-02 PLANO DE LOSA MACIZA Y VIGAS
BLOQUE 10 (TANQUE
E-03 DETALLE DE VIGAS DEL TERCER AL QUINTO NIVEL
ELEVADO Y CISTERNA)
E-04 PLANO DETALLE DEL TANQUE ELEVADO
E-05 DETALLE DE PORTICOS Y DETALLES GENERAL
E-01 PLANTA DE ZAPATAS, VIGAS Y LOSA MACIZA
BLOQUE 11 (ESCALERA
DE EDIFICACION
EXISTENTE)
E-02 DETALLE DE PORTICO Y DETALLES GENERALES
E‐01 PLANTA CIMENTACIONES GENERALES
E‐02 DETALLE DE PORTICO 1/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐03 DETALLE DE PORTICO 2/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐04 DETALLE DE PORTICO 3/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐05 DETALLE DE PORTICO 4/10, VIGAS, COLUMNAS Y CIMIENTOS
BLOQUE 13 (CERCO
PERIMETRICO) E‐06 DETALLE DE PORTICO 5/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐07 DETALLE DE PORTICO 6/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐08 DETALLE DE PORTICO 7/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐09 DETALLE DE PORTICO 8/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐10 DETALLE DE PORTICO 9/10, VIGAS, COLUMNAS Y CIMIENTOS
E‐11 DETALLE DE PORTICO 10/10, VIGAS, COLUMNAS Y CIMIENTOS
BLOQUE/NOMBRE
N° LAMINA NOMBRE DE PLANO
DE BLOQUE
E‐12 PLANTA CIMIENTOS DETALLE DE CIMIENTOS Y REJA
E‐13 DETALLE DE PORTICO 1/4, VIGAS, COLUMNAS Y CIMIENTOS
E‐14 DETALLE DE PORTICO 2/4, VIGAS, COLUMNAS Y CIMIENTOS
E‐15 DETALLE DE PORTICO 3/4, VIGAS, COLUMNAS Y CIMIENTOS
E‐16 DETALLE DE PORTICO 4/4, VIGAS, COLUMNAS Y CIMIENTOS
E‐01 PLANIMETRIA
BLOQUE 14 (MURO DE
CONTENCION) E‐02 CORTES DE MUROS DE CONTENCION
E‐03 DETALLES DE MUROS DE CONTENCION
E-01 PLANTA DE CIMIENTOS, ZAPATAS, VIGAS Y DETALLES DE COLUMNAS
E-02 DETALLE DE VIGAS Y POTICOS 1/3
BLOQUE 15 (PERGOLAS) E-03 DETALLE DE VIGAS Y POTICOS 2/3
E-04 DETALLE DE VIGAS Y POTICOS 3/3
E-05 DETALLES GENERALES
Factores de reducción
Coeficiente de Reducción-
SISTEMA ESTRUCTURAL
Estructuras Regulares
Para el análisis por cargas ortogonales del cerco perimétrico y parapetos se consideran
los parámetros de diseño sismorresistente siguientes:
Para el cálculo del factor de amplificación sísmica se ha considerado como valor que
define la plataforma del espectro para este tipo de suelo Tp = 0.60 seg siendo:
La fuerza cortante total en la base de las estructuras en cada dirección ha sido calculada
con la expresión:
ZUSC
V P C / R 0.125
R
w = 0.8 Z U C1 γ e
Siendo:
γ = Peso especifico de la albañilería
e = Espesor bruto del muro (incluyendo tarrajeo)
3.5.3. MATERIALES
Concreto:
- Zapatas corridas : f´c = 210 Kg/cm2
- Cimientos armados : f´c = 210 Kg/cm2
- Losa aligerada : f´c = 210 Kg/cm2
- Vigas y columnas : f´c = 210 Kg/cm2
- Zapatas : Concreto f’c= 210 Kg/cm2.
- Vigas de Cimentación : Concreto f’c= 210 Kg/cm2.
Acero:
- Corrugado : f’y= 4200 Kg/cm²
- Para las estructuras metálicas se ha empleado Acero Laminado en Caliente ASTM
A500, ASTM A36, soldadura E6011, soldadura E7018 y pernos ASTM A325.
Albañilería - tabiquería:
- Resistencia Característica : Tabiquería, Muro estructural albañilería.
- Unidad de Albañilería : Tipo IV King Kong industrial 13x9x24 cm
- Mortero : 1:5 (Cemento: Arena).
- Juntas (H: V) : 1.5 cm (juntas de mortero en ladrillo).
- Resistencia del bloque : f´m = 65 Kg/cm2
PREDIMENSIONAMIENTO DE LOSAS
Para pre dimensionar las losas aligeradas, se tiene en consideración que trabajan:
para carga vertical (flexible), y para carga lateral (diafragma rígido). El peralte de las
losas aligeradas podrá ser dimensionado considerando las cargas vivas y la luz libre
de la losa, siguiendo el siguiente criterio.
𝐿
ℎ
𝑥
Siendo: h: altura de losa; L: Longitud del lado mayor; x: Valor según la tabla:
Carga viva
x
kgf/cm2
350 22
400 21
450 20
500 19
<=300 25
Para el peralte de las losas macizas se tomará el valor obtenido de acuerdo a la
anterior expresión restando 5 cm.
PREDIMENSIONAMIENTO DE VIGAS
Al predimensionar un elemento estructural se debe tomar en cuenta aspecto
económico y el arquitectónico, dimensionando una sección adecuada se satisface las
cuantías de acero, el costo y así mismo lo arquitectónico.
El dimensionamiento de vigas permite controlar las deflexiones, fisuras y dar la rigidez
al elemento, no debe ser menor de 0.25h ni de b ≥ 0.25 m. para pórticos o elementos
estructurales que soporten fuerzas laterales de sismo.
Las vigas secundarias pueden tener un peralte menor que las principales, sin embargo
por efectos de sismo y arriostramiento es considerado 1/14 de luz libre.
Para las vigas principales:
𝐿 𝐿
ℎ 𝑎
10 12
Siendo L; la luz más crítica en el sentido de la viga principal
Para el ancho de las vigas:
ℎ ℎ
𝑏 𝑎
2 3
Siendo el ancho mínimo 25 cm
Para las vigas secundarias:
𝐿
ℎ
14
PREDIMENSIONAMIENTO DE COLUMNAS
Son elementos sometidos a carga axial y momento flector las cuales tienen que ser
dimensionadas considerando los dos efectos simultáneamente:
Para las columnas centradas: Área de columna = P (servicio) / 0.45 f'c
Para las columnas excéntricas o esquinadas: Área de columna = P (servicio) / 0.35 f'c.
PREDIMENSIONAMIENTO DE ESCALERAS
Las escaleras en la edificación se comportan como losas macizas en una dirección por
lo cual tenemos la siguiente ecuación.
𝑳
𝒉
𝟐𝟎
RECUBRIMIENTOS
ELEMENTOS RECUBRIMIENTO
Vigas y columnas 40 mm
4. CONCLUSIONES Y RECOMENDACIONES
La presente memoria descriptiva se realizó teniendo en cuenta las memorias de
cálculo de cada bloque integrante del proyecto, cumpliendo los criterios señalados en
el Reglamento Nacional de Edificaciones, cuyos resultados de análisis se muestran en
los planos correspondientes de estructuras y las memorias de cálculo
correspondientes.
Se recomienda realizar un control estricto de habilitación de acero al momento de
ejecución de obra, a fin de garantizar las cuantías de acero de refuerzo, recubrimientos
mínimos de concreto, verificación de anchos y peraltes de las secciones de los
elementos estructurales.