Documentos de Académico
Documentos de Profesional
Documentos de Cultura
TERMODINÁMICA II
PRESENTADO POR:
CÓDIGO:
2019246901
AREQUIPA
2021
10.15 MORAN SHAPIRO.
"A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working
fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar.
The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min.
Determine
(a) the compressor power, in kW.
(b) the refrigeration capacity, in tons.
(c) the coefficient of performance."
"SOLUCION"
m_dot = 7/60
"Hallamos estados"
"Estado 1"
x[1]=1
P[1]=2*100
s[1]=Entropy(R134a,x=x[1],P=P[1])
h[1]=Enthalpy(R134a,x=x[1],P=P[1])
"Estado 2"
0.8=(hs[2]-h[1]) / (h[2]-h[1])
s[2] = s[1]
P[2]=8*100
hs[2]=Enthalpy(R134a,s=s[2],P=P[2])
"Estado 3"
x[3]= 0
P[3] = P[2]
h[3]=Enthalpy(R134a,x=x[3],P=P[3])
"Estado 4"
h[4] = h[3]
"a) poder del compresor en kW"
W_comp = (h[2] - h[1]) * m_dot
"b) capacidad de refrigeración en tons (211kJ/min - 3.5 kW)"
Q_in = (h[1] - h[4]) * m_dot
Q_intons = Q_in/3.5
"c) Coeficiente de rendimiento"
B = Q_in/W_comp
10-2 MORAN SHAPIRO.
El refrigerante 22 es el fluido de trabajo en un ciclo de refrigeración de vapor de Carnot para el cual la
temperatura del evaporador es de -30 ° C. El vapor saturado ingresa al condensador a 36 ° C y el líquido
saturado sale a la misma temperatura. 10 Kg / min. Determinar:
a) La tasa de transferencia de calor en el evaporador en KW.
b) La potencia neta de entrada al ciclo en KW.
c) COP
d) La capacidad de refrigerante en toneladas.
T[2] = 36[C]
x[2] = 1
s[2]=Entropy(R22,x=x[2],T=T[2])
h[2]=Enthalpy(R22,x=x[2],T=T[2])
T[1]=-30[C]
s[2]=s[1]
h[1]=Enthalpy(R22,s=s[1],T=T[1])
T[3] =T[2]
x[3] = 1
s[3]=Entropy(R22,x=x[3],T=T[3])
h[3]=Enthalpy(R22,x=x[3],T=T[3])
T[4] =T[1]
s[4]=s[3]
h[4]=Enthalpy(R22,s=s[4],T=T[4])
m=10/60 [kg/s]
Q_in = (m*(h[1]-h[4]))
W_ciclo=m*((h[2]-h[1])-(h[3]-h[4]))
COP = Q_in/ W_ciclo
Q_entrada = (m*(h[1]-h[4]))/(211/60)
11.12 CENGEL 5TA EDICION.
11-12 Un refrigerador utiliza refrigerante 134a como fluido de trabajo y opera en un ciclo ideal de
refrigeración por compresión de vapor entre 0.12 y 0.7 MPa. El flujo másico del refrigerante es 0.05 kg/s.
Muestre el ciclo en un diagrama T-s respecto de las líneas de saturación. Determine
a) la tasa de remoción de calor del espacio refrigerado y la entrada de potencia al compresor; b)
la tasa de rechazo de calor al ambiente y c) el coeficiente de desempeño.
"EN EL COMPRESOR"
s[1]=ENTROPY(Air,T=T[1],P=P[1])
s2s=s[1] "PROCESO ISENTROPICO"
P[2] = P[3]
s2s=ENTROPY(Air,T=Ts2,P=P[2])
Eta_comp = W_dot_comp_isen/W_dot_comp "EFICIENCIA ADIABTICA DEL COMPRESOR"
m_dot*h[1] + W_dot_comp_isen = m_dot*hs2
h[1]=ENTHALPY(Air,T=T[1])
hs2=ENTHALPY(Air,T=Ts2)
m_dot*h[1] + W_dot_comp = m_dot*h[2]"PRIMERA LEY"
h[2]=ENTHALPY(Air,T=T[2])
s[2]=ENTROPY(Air,h=h[2],P=P[2])
m_dot*h[2] + Q_dot_out = m_dot*h[3]"PRIMERA LEY"
h[3]=ENTHALPY(Air,T=T[3]) "
s[3]=ENTROPY(Air,T=T[3],P=P[3])
"PROCESO DE REFRIGERACION:"
m_dot*h[4] + Q_dot_Refrig = m_dot*h[1]
"SOLUCION"
x[1]=1
T[1]=5 [F]
x[3]=0
P[3]=180 [psia]
Q_dot_L=45000 [Btu/h]
"Analisis"
Fluid$='ammonia'
"En el compresor"
h[1]=enthalpy(Fluid$, T=T[1], x=x[1])
s[1]=entropy(Fluid$, T=T[1], x=x[1])
s[2]=s[1]
P[2]=P[3]
h[2]=enthalpy(Fluid$, P=P[2], s=s[2])
"Analizando el ciclo"
m_dot_R=Q_dot_L/(h[1]-h[4])
W_dot_in=m_dot_R*(h[2]-h[1])*Convert(Btu/h, kW)