Documentos de Académico
Documentos de Profesional
Documentos de Cultura
RESUMEN
Si la probeta falla durante el proceso de doblado, esta probeta no servirá para el ensayo, ya que el
objetivo principal de la práctica es ver fisuras en la soldadura.
ABSTRACT
In the class of Materials Resistance Laboratory for Practice No. 9, the weld bending test was
carried out, for which we used 3 previously welded specimens (steel material). A Tinius Olsen
brand test machine was used which was used together with an accessory which has its
measurements specified in the ASME 9 standard (we can also work with the ASTM 190 standard,
but it has different measurements).
The weld bending test consists of applying a constant force in a specimen to achieve a bend in the
welded plate so that it acquires a "U" shape in the center of the weld. The convex curvature of the
plate is analyzed for cracks, or other imperfections. The main function of this test is to evaluate
the quality of the weld, and therefore its ductility and its sanity, to support a possible bending
cracking. The test piece that is used to make the bend must comply with everything specified in
the NTE INEN 2165 standard.
The convex surface of the curvature is examined for cracks or other defects.
If the specimen fails during the bending process, this specimen will not be used for the test, since
the main objective of the test is to see cracks in the weld.
CONCLUSIONES