Documentos de Académico
Documentos de Profesional
Documentos de Cultura
sensores especiales
TERMOCUPLAS
Modelo: ET
Modelo: TTCP
Modelo: TTLT1
Aisladores cermicos
Cabezote
Elemento
Tubo de
proteccin
en LT -1
Cabezote
Tubo Acero
SS 304
Bloque
Tubo de proteccin cermico
cermico
Modelo: TTPF
Modelo: TTA
Cabezote
Modelo: TTP
Termopozo
planchado SS 304
Extensin
Elemento
Cabezote
Extensin
Elemento
Elemento
Termopozo
acero ss304
Elemento
Cabezote
Bloque cermico
Termopar trabajo pesado
Acero SS 304
Tubo de proteccin
TERMORESISTENCIAS PT 100
Modelo: PT 100 - BULB FD
Modelo: PT 100 - TP
Cabezote
Extensin
PT 100
Termopozo
Cabezote
NPT
Tubo de proteccin
Modelo: T - Expuest
Termopar sencillo
Termopar de bayoneta (conduit)
Modelo: T - Bayo
Modelo: T - BULB
Termopar de bulbo
25
Modelo: T - Expuest
Blindaje
Aislamiento total
Aislamiento individual
Modelo: T - Aran.
Termopar de arandela
Datos Tcnicos:
Sensor: Termoresistencia Pt-1000
Referencia: RTD-PT-1000-PZCB-2
Cdigo: CC-5162-122-PTP
Rango de Temperatura: -50 a 250oC
Rango de Presin: 0-150psi
Material Pozo: Acero Inoxidable 304
Material Cabezote: fundicin de Aluminio
Aislamiento: fibra de vidrio
Dimensiones:
Dimetro bulbo (): 5/16
Longitud Bulbo (L): 2
Conexin: 1/2NPT
Aplicaciones:
Termoresistencia para montaje en sistemas de fluidos ya sean estticos o
dinmicos (tanques, ductos, etc.), se recomienda montar en termopozo para
que en el momento en que necesiten cambiar el sensor no tengan que vaciar el
tanque o hacer paro de lnea, tiene cabezote de conexin con proteccin IP-55
en el cual se puede sacar la seal de ohmios o tambin se puede emplear para
montar transmisor.
Datos Tcnicos:
Sensor: termoresistencia Pt-100
Referencia: RTD-PT-100-BOCA-6
Cdigo: CC-610-2050-PTO
Rango de Temperatura: -50 a 250oC
Material Bulbo: Acero Inoxidable 304
Material Cable: tefln
Material Coraza: Acero inoxidable
Aislamiento: Fibra de vidrio y tefln
Dimensiones:
Dimetro bulbo (b): 6x10mm
Longitud Bulbo (L1): 20x50mm
Dimetro Ojo (o): 6.5mm
Longitud Cable (L2): 2000mm
Dimetro Coraza (c): 8mm
Aplicaciones:
Termoresistencia PT-100 flexible para ambientes secos, se recomienda
normalmente para sensar temperaturas en superficies como carcasas,
chumaceras, planchas y todo tipo de proceso donde el ambiente de trabajo del
sensor sea seco, una termoresistencia Pt-100 puede trabajar hasta 600oC, pero
debido a la construccin de este tipo sensor se recomienda un rango de trabajo
mximo de 250oC, debido a que el cable de extensin solo aguanta esta
temperatura y si se expone a temperaturas mayores por transferencia de calor
es posible que este se degrade muy rpidamente, la coraza de acero
inoxidable sirve para proteger tanto trmicamente como mecnicamente.
Datos Tcnicos:
Sensor: Termocupla tipo K
Referencia: TC-K-PZCB-16
Cdigo: CC-1416-122-TCP
Rango de Temperatura: -50 a 850oC
Rango de Presin: 0-150psi
Material Pozo: Acero Inoxidable 304
Material Cabezote: fundicin de Aluminio
Aislamiento: Cermica
Dimensiones:
Dimetro (): 1/4
Longitud Bulbo (L): 40
Conexin: 1/2NPT
Aplicaciones:
Termocupla para montaje en sistemas de fluidos ya sean estticos o
dinmicos (tanques, ductos, etc.), se recomienda montar en termopozo para
que en el momento en que necesiten cambiar el sensor no tengan que vaciar el
tanque o hacer paro de lnea, tiene cabezote de conexin con proteccin IP-55
en el cual se puede sacar la seal de mili voltaje o tambin se puede emplear
para montar transmisor.
Datos Tcnicos:
Material: Acero inoxidable 304
Referencia: TP-20400-CX34
Cdigo: CC-20400-3412-TP
Rango de Temperatura: -50 a 850oC
Rango de Presin: 0-450psi
Dimensiones:
Dimetro bulbo (): 20mm
Longitud Bulbo (L): 380mm
Conexin Interna: NPT
Conexin Externa: NPT
Aplicaciones:
Termopozo en acero inoxidable resistente a la corrosin atmosfrica y a la del
agua de mar, al ataque de sustancias alimenticias, de ciertos cidos minerales,
la mayora de los cidos orgnicos y muchos otros agentes corrosivos. Para
montaje en sistemas de fluidos ya sean estticos o dinmicos (tanques, ductos,
etc.), se recomienda para montar termmetros, termocuplas, termoresistencias
entre otros con el fin de no tener que vaciar los tanques o hacer paro de lnea
en el momento de hacer cambio de sensor.
;
BARCOPAC MgO Insulated Thermocouples
BARCOPAC
Sheath
MgO Insulation
Wire
BARBER-COLMAN CO.
LOVES PARK, ILL. U.S.A.
BARBER-COLMAN CO.
LOVES PARK, ILL. U.S.A.
Dual Element
BA
RB
E
IND R
LO
US -CO
VE
TR L
SP
IA M
AR D LIN AN
K, IVIS ST C
ILL IO RU O
INO N ME M
NT PA
IS
611
S NY
32
U.S
.A.
HA136712
Page 4-1
Single Element
Model No. M
Field No.
Field 1
10
11
12
13
14 15
Code M always occupies field 1. This identifies the sensor as an MgO insulated
thermocouple with the BARCOPAC trade name.
Model No. M
Field No.
10
11
12
13
14 15
Field 2
Thermocouple Type
Codes J, K, E, T indicate thermocouple wire Types J, K, E, T with special limits;
codes 1, 2, 3, 4 indicate thermocouple wire Types J, K, E, T with standard limits.
Field 3
Sheath Material
Inconel 600 and three grades of stainless steel are available.
Field 4
Sheath Diameter
Diameters range from 0.040 to 0.250.
Field 5
Junction Style
This code indicates whether the element is grounded or ungrounded; it also indicates if dual
element junctions are isolated or common.
Field 6
Fields 7, 8, 9
Rigid Length
The code in this field specifies the rigid length in whole inches.
Flexible Length
If the thermocouple has a flexible lead, this field specifies the length in whole inches.
Field 13
Mounting Fitting
Indicates the attaching device that mounts the sensor to the workpiece.
Fields 14, 15
Page 4-2
HA136712
MgO Thermocouples
Magnesium Oxide Insulated Thermocouples (BARCOPAC)
(Also see pad style thermocouples.)
Introduction
MgO insulated thermocouple wire is manufactured from premium quality wire encased in
pure magnesium oxide, and processed into a chemically clean outer metal sheath. The
wires are individually selected and matched, and are of uniform cross section with smooth
surfaces. Finished stock is warranted to meet ANSI standard limits of error set forth in
MC96.1. The unique preparation of MgO insulated thermocouple wire produces a uniform
thickness of insulation with high density. The result is a product that is mechanically strong
and resistant to penetration of corrosive gases and moisture. The diameters of 0.040 and
1/16 are useful for applications requiring fast response.
Junction Construction
Ungrounded (insulated): Thermocouple insulated from sheath with MgO. Stray EMF is
prevented from affecting the reading. Response from rapid or frequent temperature cycling
is slower than for grounded style.
Exposed: Thermocouple junction is not protected by welded cap. Used for quick response,
but is susceptible to corrosive failure.
Time Constants
The time constant is the amount of time required for a thermocouple to indicated 63.2%
of step change in temperature of a surrounding media. Some of the factors influencing the
measured time constant are sheath wall thickness, degree of insulation compaction, and
distance of junction from the welded cap on an ungrounded thermocouple. In addition, the
velocity of a gas past the thermocouple probe greatly influences the time constant measurement.
In general, time constants for measurement of gas can be estimated to be ten times as long
as those for measurement of liquid. The time constant also varies inversely proportional
to the square root of the velocity of the media.
Approximate time constants for different sheath diameters in water are shown below for a
step change from 0 to 100C:
Sheath Diameter
0.040
0.063
0.125
0.188
0.250
Grounded Junction
0.2 second
0.3 second
0.5 second
1.0 second
2.3 seconds
Specifications
Insulation Purity
MgO densely packed. High purity 99.4% MgO is used only with types K and S, Inconel
sheathing. All others are standard purity 96% MgO.
Temperature Ratings
HA136712
Page 4-3
Thermocouples with magnesium oxide insulation are recommended where the thermocouple is immersed in liquids, high moisture, corrosive gases, or high pressures. The
thermocouple can be formed to reach otherwise inaccessible areas. The magnesium oxide
has a high dielectric strength, responds quickly to temperature changes, and is very durable.
MgO Thermocouples
Ordering Information
Model No. M
Field No.
Sheath
MgO Insulation
Wire
Single Element
Dual Element
10 11 12
13
14 15
Diameter
0.125
0.125
0.187
0.187
0.250
0.250
0.125
0.250
0.040
0.063
0.250
0.250
0.040
0.063
0.125
0.125
0.188
0.250
0.250
0.125 Note 1
0.250 Note 1
0.250
0.250
0.250
0.250
0.040
0.063
0.063
0.125
0.125
0.188
0.188
0.250
0.250
0.375
0.063
0.125
0.188
0.250
0.063
0.063
0.125
0.125
0.188
0.188
Note 1: Hoskins 2300 is no longer manufactured. We will continue to supply this product until existing inventories are exhausted.
Page 4-4
HA136712
MgO Thermocouples
Ordering Information (continued)
HA136712
Diameter
0.250
0.250
0.063
0.125
0.063
0.125
0.188
0.250
0.250
0.040
0.063
0.073
0.125
0.125
0.188
0.188
0.250
0.250
0.375
0.063
0.125
0.188
0.250
0.250
0.125
0.188
0.188
0.250
0.125
0.125
0.188
0.125
0.250
0.250
0.063
0.125
0.188
0.250
0.250
0.250
0.250
Page 4-5
MgO Thermocouples
Ordering Information (continued)
Junction Styles
Field 5 codes
1 -Grounded single element
5 - Ungrounded dual
element, common junction
6 - Ungrounded dual
element, isolated junctions
7 - Exposed dual
element, common junction
8 - Exposed dual
element, isolated junctions
Page 4-6
HA136712
;
;
MgO Thermocouples
2-1/4"
nominal
Y (2")
X (1/8")
X
(1/8")
Molded
transition
Adjustable
compression fitting
MgO insulated
elements in sheath
Field 13.
Codes 1, 2, 4, 5.
1-1/2"
Metal Potting
Adapter
Fiberglass insulated
leads in flexible armor
BAR
IND BER-C
UST OLM
RIA AN
LOVE
S PA D L INST COM
RK, IVISIO RUM PAN
ILLI N
ENTS Y
NO
IS 61
132
U.S
.A.
HA136712
1/4" NPT:
1/2" NPT:
3/4" NPT:
1" NPT:
1.500" Long
1.750" Long
1.837" Long
2.219" Long
"U"
.687"
Page 4-7
1" (Ref)
MgO Thermocouples
Ordering Information (continued)
;;
Fields 14, 15
Y
Code 00
Code 02
BA
LO RB
VE ER
S
-C
PA OL
RK MA
, ILL N
. U.S CO
.
.A.
Code 01
BA
LO RB
VE ER
S
-C
PA OL
RK MA
, ILL N
. U.S CO
.
.A.
Code 05
Code 06
Codes 08, 09
Codes 10, 27
Codes 12, 17
Notes:
Note 1:
Note 2:
Note 3:
Note 4:
Code 11 and
Note 5:
Code 31 (illustrated)
Note 6:
Code 22
Code 32
Code 33
Page 4-8
HA136712