Documentos de Académico
Documentos de Profesional
Documentos de Cultura
I.E.S. PROFESOR
CURSO 2020 / 2021
DOMÍNGUEZ ORTIZ
MÓDULO: Automatismos Industriales
1.-OBJETO DE LA PRÁCTICA
Montar sobre panel el mando de un contactor mediante pulsador para el arranque de un motor trifásico.
ALUMNO:
NÚMERO
TÍTULO DE LA PRÁCTICA: MANDO A IMPULSOS (PULSADOR) DE UN CONTACTOR. DE 3.1
PRÁCTICA:
FECHA DE INICIO: FECHA DE ENTREGA:
2.-DESCRIPCIÓN DE LA PRÁCTICA
Fase 2: Reunir los elementos necesarios para el montaje actual: Bornas magnetotérmicos, diferenciales…
14,5 cm
1º CFGM INSTALACIONES ELECTROTÉCNICAS
I.E.S. PROFESOR
CURSO 2020 / 2021
DOMÍNGUEZ ORTIZ
MÓDULO: Automatismos Industriales
3.-ESQUEMA
1º CFGM INSTALACIONES ELECTROTÉCNICAS
I.E.S. PROFESOR
CURSO 2020 / 2021
DOMÍNGUEZ ORTIZ
MÓDULO: Automatismos Industriales
KM1
KM1
1º CFGM INSTALACIONES ELECTROTÉCNICAS
I.E.S. PROFESOR
CURSO 2020 / 2021
DOMÍNGUEZ ORTIZ
MÓDULO: Automatismos Industriales
Aquí las protecciones trifásicas, si por ejemplo medimos el voltaje entre fases, siempre marcaria 400 V, pero si es fase + neutro, da 230 V.
5.-OBSERVACIONES.
6.-HERRAMIENTAS.
Kit de destornilladores Dexter Usar el calibre correcto según el tamaño del tornillo
5M Cable de Conducción RS PRO, 1,5 mm², 450 / 750 V, 17,5 A, RV-K RVK3G1,5 0,64€/M 3,2€
Negro, H07V-U, 100m, 6491X
SUBTOTAL: 155,21€
TOTAL: 187.8€