Documentos de Académico
Documentos de Profesional
Documentos de Cultura
PC 5 - Pi
PC 5 - Pi
1. Jason Coryell, Josh Campbell, Vesna Savic, John Bradley, Sushil Mishra, Shashank
Tiwari, Louis Hector, Jr. “Tensile deformation of quenched and partitioned steel - a
third generation high strength steel,” Supplemental Proceedings, Vol 2, Materials
Properties, Characterization and Modeling, 555-562 2012
2. Franck, C., Hong, S., Maskarinec, S.A., Tirrell, D.A., Ravichandran, G., “Three-
Dimensional Full-Field Measurements of Large Deformations in Soft Materials using
Confocal Microscopy and Digital Volume Correlation,” Experimental Mechanics, 47,
427-438, 2007.
3. Oleg Kovalchuk, “Computational Models of Building Structures. Visualization and
Intelligent Content Design”. IOP Conf. Series: Materials Science and Engineering 661
(2019).
Referencias:
1. J. S. Bergström, “CONSTITUTIVE MODELING OF THE LARGE STRAIN TIME-DEPENDENT
BEHAVIOR OF ELASTOMERS”, J. Mech. Phys. Solids., Vol. 46, pp. 931–954, 1998.
2. G. Alcuri, “Los elastómeros en la construcción: aplicaciones y valorización
medioambiental”. Universidad de Montevideo, Memoria Investigaciones en Ingeniería,
núm. 16 (2018) 19 ISSN 2301-1092.
3. S.I. Vol’fson, “The elastic hysteresis properties of dynamic thermoplastic elastomers
modified with a nanofiller”. Plasticheskie Massy, No. 4, 2012, pp. 42–45.