Documentos de Académico
Documentos de Profesional
Documentos de Cultura
LABORATORIO DE ASFALTO
FACULTAD DE INGENIERÍA
RESUMEN
Palabras claves
Ablandamiento, tiempo, bituminoso, susceptibilidad térmica, temperatura, INV E 712-07.
ABSTRAC
To determine the softening point of the bituminous materials, the softening point test of bituminous
materials is carried out in which the aim is to determine the temperature at which the bituminous material
is affected by the thermal susceptibility, that is to say, that it changes in viscosity abruptly with small
temperature variations. In which 2 horizontal discs of bituminous material are used, fused between the
bronze rings, a controlled rat is heated in a liquid bath, while each of them has a steel ball. The softening
point is considered as the average value of the temperatures, at which the two discs soften sufficiently, to
allow each ball to fall. This experience is carried out by means of the ring and ball test, this can be applied
to solid and semi-solid materials.
All this procedure is done with the guidance of the standard INV E 712-13.
Keywords
1
UNIVERSIDAD DE LA COSTA
LABORATORIO DE ASFALTO
FACULTAD DE INGENIERÍA
relevante para luego realizar una clasificación del carreteras se conoce como “método del anillo y
producto bituminoso ya que este puede llegar a la bola “y se puede aplicar a los materiales
estar sometido a temperaturas elevadas, durante sólidos o Semi-sólidos. [2]
su vida de servicio, el punto de ablandamiento
Los productos bituminosos son materiales visco-
generalmente se encuentra entre los 55°C a 59°C.
elásticos y no cambian del estado sólido al estado
2. OBJETIVOS líquido a una temperatura definida, sino que
gradualmente se tornan más blandos y menos
2.1 OBJETIVO GENERAL viscosos cuando la temperatura se eleva. Por esta
razón, el punto de ablandamiento se debe
Determinar el punto de ablandamiento del determinar por medio de un método arbitrario
asfalto por medio del ensayo de anillo y bola. fijo, pero definido que produzca resultados
reproducibles y comparables
2.2 OBJETIVOS ESPECIFICOS El punto de ablandamiento es útil para clasificar
productos bituminosos y es un valor índice de la
Realizar adecuadamente el
procedimiento para determinar el punto tendencia del material afluir cuando está
de ablandamiento según lo descripto en sometido a temperaturas elevadas, durante su
la norma INV E 712.13 vida de servicio. También, puede servir para
establecer la uniformidad de los embarques o
Identificar los materiales y los equipos fuentes de abastecimiento.
necesarios para el desarrollo del ensayo
de punto de ablandamiento por el
método de anillo y bola. 4. MATERIALES Y EQUIPOS
2
UNIVERSIDAD DE LA COSTA
LABORATORIO DE ASFALTO
FACULTAD DE INGENIERÍA
5. CÁLCULOS MATEMATICOS
Temperatura =52°
Imagen 1. Montaje aparato. Penetración = 56.36mm
4.2 PROCEDIMIENTO
3
UNIVERSIDAD DE LA COSTA
LABORATORIO DE ASFALTO
FACULTAD DE INGENIERÍA
7. REFERENCIAS
http://www.construmatica.com/constru
pedia/Asfalto [2]
6. CONCLUSIONES
4
UNIVERSIDAD DE LA COSTA
LABORATORIO DE ASFALTO
FACULTAD DE INGENIERÍA
8. ANEXOS
Imagen 1.
Imagen 2.
Fuente: elaboración propia.
5
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE ASFALTOS
FACULTAD DE INGENIERÍA