Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Manual Rodamientos
Manual Rodamientos
Index
INDICE INDEX
PARTE I PART I
RODAMIENTOS ........................................................8 BEARINGS ................................................................8
PARTE II PART II
SOPORTES...............................................................246 BEARING UNITS .......................................................246
PARTE III PARTIII
BOLAS .....................................................................300 BALLS .......................................................................300
PARTE I PART I
INTRODUCCION INTRODUCTION
THE STRUCTURE AND TYPES OF ROLLING
ESTRUCTURA Y TIPOS DE RODAMIENTOS..........8 BEARINGS ................................................................8
ESTRUCTURA DE LOS RODAMIENTOS.................8 THE STRUCTURE OF ROLLING BEARINGS ..........8
TIPO DE RODAMIENTOS .........................................9 TYPES OF ROLLING BEARINGS .............................9
CARACTERISTICAS DE LOS PRINCIPALES TIPOS DE CHARACTERISTICS OF MOST IMPORTANT ROLLING
RODAMIENTOS.........................................................10 BEARING TYPES ......................................................10
Rodamientos rígido de bolas .....................................10 Deep groove ball bearings .........................................10
Rodamientos de bolas de contacto angular...............10 Angular contact ball bearings .....................................10
Rodamientos de bolas
de cuatro puntos de contacto .....................................11 Four-point contact ball bearings .................................11
Rodamientos de bolas autoalineable .........................12 Self-aligning ball bearings ..........................................12
Rodamientos de rodillos cilíndricos............................12 Cylindrical roller bearings ...........................................12
Rodamientos de rodillos cónicos ...............................13 Taper roller bearings ..................................................13
Rodamientos de rodillos esféricos .............................13 Spherical roller bearings.............................................13
Rodamientos de agujas .............................................14 Needle roller bearings ................................................14
Rodamientos axial de bolas .......................................14 Thrust ball bearings....................................................14
Rodamientos axial de rodillos cilíndricos ...................15 Cylindrical roller thrust bearings.................................15
Rodamientos axial de agujas .....................................15 Thrust needle roller bearings .....................................15
Rodamientos axial de rodillos esféricos.....................15 Spherical roller thrust bearings...................................15
INTRODUCCIÓN A LA SELECCIÓN DEL
RODAMIENTO...........................................................16 INTRODUCTION TO SELECTION OF BEARINGS ..16
CONDICIONES AMBIENTALES Y DE THE USE CONDITIONS AND THE SURROUNDING
FUNCIONAMIENTO DE LOS RODAMIENTOS.........16 CONDITIONS OF THE BEARINGS ...........................16
LA DISPOSICION DE LOS RODAMIENTOS ...........17 THE BEARING COLLOCATION ................................17
SELECCION DEL TIPO DE RODAMIENTO .............18 SELECTION OF BEARING TYPE.............................18
SELECCION DE LA ESTRUCTURA DEL
RODAMIENTO...........................................................20 SELECTION OF BEARING STRUCTURE ...............20
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 1
Índice
Index
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
2 - WWB
Índice
Index
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 3
Índice
Index
SERIES SERIES
RODAMIENTOS RÍGIDOS DE BOLAS DEEP GROOVE BALL BEARINGS
RODAMIENTOS RÍGIDOS DE BOLAS SINGLE ROW DEEP GROOVE
DE UNA HILERA ........................................................58 BALL BEARINGS .......................................................58
RODAMIENTOS RÍGIDOS DE BOLAS DE UNA HILERA
CON RANURA PARA ANILLO ELÁTICO Y ANILLO SINGLE ROW DEEP GROOVE BALL BEARINGS
ELÁSTICO..................................................................74 WITH SNAP RING AND SNAP RING ........................74
RODAMIENTOS RÍGIDOS DE BOLAS DE UNA HILERA SINGLE ROW DEEP GROOVE BALL BEARINGS
DE ACERO INOXIDABLE ..........................................82 STAINLESS STEEL ...................................................82
RODAMIENTOS RÍGIDOS DE BOLAS DOUBLE ROW DEEP GROOVE
DE DOS HILERAS .....................................................88 BALL BEARINGS .......................................................88
RODAMIENTOS DE BOLAS TIPO MAGNETO .........92 MAGNETO TYPE BALL BEARINGS..........................92
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
4 - WWB
Índice
Index
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 5
Índice
Index
PARTE II PART II
INTRODUCCIÓN .....................................................246 INTRODUCTION 246
SERIES SERIES
SOPORTES DE FUNDICIÓN CON RODAMIENTOS DE CAST IRON PILLOW BLOCKS WITH CHROME STEEL
ACERO AL CROMO BEARINGS
SOPORTES UCP DE FUNDICIÓN ..........................248 CAST IRON PILLOW BLOCKS UCP ........................248
SOPORTES UCF DE FUNDICIÓN ..........................250 CAST IRON PILLOW BLOCKS UCF ........................250
SOPORTES UCFL DE FUNDICIÓN ........................252 CAST IRON PILLOW BLOCKS UCFL ......................252
SOPORTES UCT DE FUNDICIÓN ..........................254 CAST IRON PILLOW BLOCKS UCT ........................254
SOPORTES UCFC DE FUNDICIÓN .......................256 CAST IRON PILLOW BLOCKS UCFC .....................256
SOPORTES UCC DE FUNDICIÓN ..........................257 CAST IRON PILLOW BLOCKS UCC ........................257
SOPORTES UCPH DE FUNDICIÓN........................258 CAST IRON PILLOW BLOCKS UCPH......................258
SOPORTES UCPA DE FUNDICIÓN ........................259 CAST IRON PILLOW BLOCKS UCPA ......................259
SOPORTES UCHA DE FUNDICIÓN ........................260 CAST IRON PILLOW BLOCKS UCHA......................260
SOPORTES UCFA DE FUNDICIÓN .........................261 CAST IRON PILLOW BLOCKS UCFA ......................261
SOPORTES UCFB DE FUNDICIÓN.........................262 CAST IRON PILLOW BLOCKS UCFB ......................262
SOPORTES DE CHAPA DE ACERO CON STEEL PLATE PILLOW BLOCKS WITH CHROME
RODAMIENTOS DE ACERO AL CROMO STEEL BEARINGS
SOPORTES SAPP DE CHAPA DE ACERO .............263 STEEL PLATE PILLOW BLOCKS SAPP...................263
SOPORTES SBPP DE CHAPA DE ACERO ............263 STEEL PLATE PILLOW BLOCKS SBPP...................263
SOPORTES SAPF DE CHAPA DE ACERO..............264 STEEL PLATE PILLOW BLOCKS SAPF ...................264
SOPORTES SBPF DE CHAPA DE ACERO ..............264 STEEL PLATE PILLOW BLOCKS SBPF ...................264
SOPORTES SAPFL DE CHAPA DE ACERO ............265 STEEL PLATE PILLOW BLOCKS SAPFL.................265
SOPORTES SBPFL DE CHAPA DE ACERO ............265 STEEL PLATE PILLOW BLOCKS SBPFL.................265
RODAMIENTOS DE ACERO AL CROMO CHROME STEEL BEARINGS
RODAMIENTOS UC DE ACERO AL CROMO ..........266 CHROME STEEL BEARINGS UC.............................266
RODAMIENTOS HC DE ACERO AL CROMO ..........268 CHROME STEEL BEARINGS HC.............................268
RODAMIENTOS SER DE ACERO AL CROMO .......269 CHROME STEEL BEARINGS SER...........................269
RODAMIENTOS UK DE ACERO AL CROMO ..........270 CHROME STEEL BEARINGS UK .............................270
RODAMIENTOS SA DE ACERO AL CROMO ..........271 CHROME STEEL BEARINGS SA .............................271
RODAMIENTOS SB DE ACERO AL CROMO ..........272 CHROME STEEL BEARINGS SB .............................272
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
6 - WWB
Índice
Index
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 7
Estructura y tipos de rodamientos
The structure and types of rolling bearings
Jaula Cage
Las jaulas se utilizan para contener a las bolas o rodillos, The cage is applied to embrace the rolling elements to
y así asegurar la distancia entre los mismos en su dirección ensure a distance between the two neighbor rollers in the
circunferencial. Las jaulas se suelen fabricar en chapa circumferential direction.
de acero embutida, en latón mecanizado, o en poliamida. Cages are usually manufactured from pressed steel sheet,
solid brass or polyamide.
Aro exterior
Jaula Outer ring
Cage
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
8 - WWB
Estructura y tipos de rodamientos
The structure and types of rolling bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 9
Estructura y tipos de rodamientos
The structure and types of rolling bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
10 - WWB
Estructura y tipos de rodamientos
The structure and types of rolling bearings
Los rodamientos de bolas con contacto angular de máxima Angular contact ball bearings in very high precision are
precisión se suministran con un ángulo de contacto de supplied with contact angles of 15º and 25º. The less
15º o de 25º, correspondiendo a menores ángulos mayores the angle the more rotating speed and the more the
velocidades de rotación y a mayores ángulos, mayor angle the more the loading capacity.
capacidad de carga. See page 96
Ver página 96
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 11
Estructura y tipos de rodamientos
The structure and types of rolling bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
12 - WWB
Estructura y tipos de rodamientos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 13
Estructura y tipos de rodamientos
The structure and types of rolling bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
14 - WWB
Estructura y tipos de rodamientos
The structure and types of rolling bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 15
Introducción a la selección de rodamientos
Introduction to selection of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
16 - WWB
Introducción a la selección de rodamientos
Introduction to selection of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 17
Selección del tipo de rodamiento
Selection of bearing type
Rigidez Rigidity
La rigidez de los rodamientos será mayor cuanto mayor The rigidity of the bearing must be increased when the
sea la rigidez del eje. La deformación de los rodamientos rigidity of the shaft is increased. The deformation of roller
de rodillos cuando soportan cargas es menor que la de bearings when carrying load is smaller than that of the
los rodamientos de bolas. La rigidez de los rodamientos ball bearings. Rigidity can be increased by applying pre-
puede aumentar incluyendo una precarga. Este método load. This method is suitable for angular contact ball
es adecuado para rodamientos con contacto angular y bearings and taper roller bearings.
de rodillos cónicos.
Desalineación Misalignment
Si la desalineación entre el aro exterior y el interior es If the misalignment between outer ring and inner ring are
grande, la carga interna dañará el rodamiento. Hay que big, the inside load can harm the bearing. So bearing
elegir un rodamiento capaz de soportar desalineaciones, types that can carry this misalignment should be chosen,
como los pertenecientes a las siguientes series. as bearings belonging to following series.
Rodamientos de bolas autoalineables, rodamientos Self aligning ball bearings, spherical roller bearings,
radiales de rodillos esféricos y rodamientos axiales de spherical thrust roller bearings.
rodillos esféricos.
Montaje y desmontaje Mounting and dismounting
Los rodamientos con agujero cilíndrico son fáciles de The bearings with cylindrical bore are easy to mount when
montar cuando son desarmables los aros interiores de are separable the inner ring and outer ring. The inner
los exteriores. Los aros interiores de los rodamientos de rings of cylindrical roller bearings, taper roller bearings
rodillos cilíndricos, los de rodillos cónicos y de agujas, se and needle roller bearings can be mounted separately to
pueden montar independientemente de los aros exteriores. the outer ring. The bearings non separable are: deep
Los rodamientos no desarmables son: los rígidos de groove ball bearings, self aligning ball bearings, angular
bolas, los de bolas autoalineables, los de bolas con contact ball bearings and spherical roller bearings.
contacto angular y los de rodillos esféricos. The bearings with taper bore are could mount above a
Los rodamientos con agujero cónico se pueden montar taper shaft or cylindrical shaft with withdrawal sleeve, are
sobre un eje cónico o sobre un eje cilíndrico utilizando easy to mounting and dismounting
un manguito de adaptación, son fáciles de montar y
desmontar.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 19
Selección de la estructura del rodamiento
Selection of bearing structure
Independiente de rodamiento fijo y rodamiento libre Regardless of fixing end or free end
Propiedades: Content:
Cuando la distancia entre los dos rodamientos When the distance between the two bearings is
es pequeña, y los efectos de la expansión del eje small, and the effects of shaft expansion are not
no son importantes, se pueden usar juntos dos important, two angular contact ball bearings or
rodamientos de contacto angular o de rodillos taper roller bearings that can carry axial load can
cónicos que soporten cargas axiales en be used together in face to face or back to back.
disposición frente a frente o espalda contra Use screw nut to adjust axial clearance after
espalda. mounting.
Se usan tuercas para ajustar el juego axial
después del montaje.
Rodamientos que se pueden aplicar: Bearings that can be applied:
Rodamiento rígido de bolas. Deep groove ball bearing.
Rodamientos de bolas con contacto angular. Angular contact ball bearings.
Rodamiento de bolas autoalineables. Self-aligning ball bearing.
Rodamiento de rodillos cilíndricos. Cylindrical roller bearing.
Rodamiento de doble hilera de rodillos cónicos. Double- row taper roller bearing.
Rodamiento de rodillos esféricos. Spherical roller bearing.
Eje vertical Vertical shaft
Propiedades: Content:
Los rodamientos que pueden soportar cargas Bearings that can carry both radial load and axial
radiales y axiales, se deberían elegir como load should be chosen for the fixing end. If the
rodamiento fijo. Si la carga axial es además axial load is too big, use the combination of thrust
grande, se usa una combinación de rodamiento bearing and radial bearing.
axial y rodamiento radial. Similarly, only bearings that can carry radial load
Por otro lado solo se adaptarán al eje expandido should be used to adapt to the shaft expansion.
los rodamientos que soporten cargas radiales.
Rodamientos que se pueden aplicar: Bearings that can be applied:
Para posición fija: For fixing end:
Combinación de rodamientos de bolas con Combined angular contact ball bearings (back to
contacto angular (espalda-espalda). back).
Rodamiento de doble hilera de rodillos cónicos. Double- row taper roller bearing.
Combinación de rodamiento axial y rodamiento Combined thrust bearing and radial bearing
radial. arrangements.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 21
Selección de las dimensiones de los rodamientos
Selection of bearing dimensions
((
P
C
L10 =
P
L10= vida nominal, 106 revoluciones. L10= basic life rating, 106 rotations
P= carga dinámica equivalente (N) P= equivalent dynamic load rating, (N)
C= capacidad de carga dinámica (N) C= basic dynamic load rating, (N)
p= exponente de la fórmula de la vida p= life index
p=3 para rodamientos de bolas p=3 ball bearings
p=10/3 para los rodamientos de rodillos p=10/3 roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
22 - WWB
Selección de las dimensiones de los rodamientos
Selection of bearing dimensions
Cuando la velocidad de rotación es constante, es más When the rotation speed is constant, it is more convenient
adecuado expresar los valores de la vida nominal en to express the life rating in time, as shown in formula.
tiempo. Estos valores se muestran en la siguiente formula.
((
P
106 C
L10h =
60n P
L10h= vida nominal en horas de servicio h. L10h= basic life rating, h
n= velocidad de giro, en rpm n= rotation speed, rpm
En la siguiente tabla podemos encontrar la vida nominal In the following table could meet the life ratings of the
requerida de los rodamientos aplicadas en determinadas bearings applicable to the machines or in especial
máquinas o en aplicaciones especiales applications
Uso no habitual, pero con un funcionamiento Motores de aire acondicionado, maquinarias para la
de alta fiabilidad construcción, transmisión por correas, elevadores
8000-12000
Not usually used but running with high reliability Air conditioner motors, construction machine, belt machines,
elevators
Para funcionamiento de 24 horas al dia sin Central hidroeléctrica, central eléctrica, maquinaria
parar de drenaje
100000-200000
24 hour continuous running without stoppage Running water equipment, power station equipment,
mining drainage works
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 23
Selección de las dimensiones de los rodamientos
Selection of bearing dimensions
En el caso de los rodamientos de vehículos de carretera In addition, for railway vehicles or automobiles, it is more
y ferrocarril, es mejor expresar la vida en términos de common to use distance of movement (Km) to express
kilómetros equivalentes. the life of relative bearings.
L10s = DL10
Por lo tanto, consideramos que las condiciones de trabajo Therefore, we assume the working conditions of the
de los rodamientos son; La carga dinámica equivalente bearing are: equivalent dynamic load is P, rotation speed
P y la velocidad de giro n.De las dimensiones de las tablas is n. From the dimension tables of the bearings, we can
de los rodamientos, se pueden seleccionar los rodamientos select the bearing that could meet the requirement of
que mejor se ajusten a los valores de C, y por consiguiente value C, then we can define the dimensions of the bearing.
dimensionar el rodamiento.
Corrección de la capacidad de carga dinámica Correction of basic dynamic load rating based on
basándose en la temperatura y tratamiento temperature and treatment on stability of bearing
dimensions
When applied in high temperature, the internal
Cuando se aplican altas temperaturas, las micro-
microstructure in the material shall change and the
estructuras del material cambian y la dureza decrece, por
hardness shall be decreased, while the basic dynamic
otro lado la capacidad de carga dinámica será más
load rating shall be smaller than in normal temperature.
pequeña que en condiciones normales. El cambio de
The changed micro-structure in the material shall not
micro-estructuras en el material hace que el rodamiento
recover even when the bearing is put back in the normal
no recupere su estructura cuando este alcance la
temperature again.
temperatura normal de nuevo.
Therefore, under high temperature conditions, the basic
Por otro lado, bajo condiciones de alta temperatura, la
dynamic load ratings must be multiplied by the temperature
capacidad de carga dinámica se multiplicará por un factor
factors.
de temperatura.
teniendo en cuenta una serie de condiciones. In addition, special materials sometimes shall elongate
Hay materiales especiales que alargan la vida de los the bearing life, even lubrication or differences in working
rodamientos, la lubricación y las diferentes condiciones conditions can have effects on bearing life. It is considered
de trabajo pueden variar la vida de los rodamientos, esto multiplicand the life L10 for a factor.
P = XF r + YF a
CAPACIDAD DE CARGA ESTATICA Y CARGA BASIC STATIC LOAD RATING AND EQUIVALENT
ESTATICA EQUIVALENTE STATIC LOAD
Capacidad de carga estática Basic static load rating
Cuando los rodamientos soportan altas cargas estáticas Partial permanent deformation will happen to the contact
o trabaja a bajas velocidades de rotación, se produce surfaces of the rolling elements and raceways when the
una deformación permanente parcial originada en los bearing carries too heavy the static load or work at
puntos de contacto entre los elementos rodantes y los extremely low rotational speed. The amount of deformation
caminos de rodadura. La magnitud de la deformación se shall increase with the growing load and shall affect the
incrementará con el crecimiento de la carga, esto afectará normal rotation when it exceeds certain limit.
al giro normal del rodamiento cuando se excedan ciertos For radial bearing and thrust bearings, the basic static
límites load rating is called radial basic static load rating Cor and
Para los rodamientos radiales y axiales la capacidad de axial basic static load rating Coa respectively. The values
carga estática se llama; capacidad de carga estática radial of them are given in the bearing dimension tables.
Cor y capacidad de carga estática axial Coa
respectivamente. Los valores se dan en las tablas
correspondientes para cada serie.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 25
Selección de las dimensiones de los rodamientos
Selection of bearing dimensions
La carga estática equivalente se puede calcular con la Equivalent static load rating can be calculated with the
formula: following formula:
Po = XoF r + YoF a
PO: carga estática equivalente [kN] PO : equivalent static load rating [kN]
XO: factor de carga radial XO: radial static load factor
YO: factor de carga axial YO: axial static load factor
Fr: carga radial [kN] Fr: radial load [kN]
Fa carga axial [kN] Fa: axial load [kN]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
26 - WWB
Dimensiones principales y sistema de denominación
Main dimensions and code number of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 27
Dimensiones principales y sistema de denominación
Main dimensions and code number of bearings
PREFIJOS (PREFIXES)
aro suelto interior o exterior de un aro interior del NU 207 inner ring NU 207 cylindrical roller
rodamiento desarmable LNU 207 rodamiento de rodillo bearing
cilíndricos
L
separable inner or outer ring of separable anillo exterior 30207 outer ring 30207 taper roller
bearing L30207 rodamiento de rodillos bearing
cónicos
aro exterior del NU 207 outer ring NU 207 cylindrical roller
rodamiento desmontable, sin su aro RNU 207 rodamiento de rodillo bearing
separable (interior o exterior) cilíndricos
R
anillo interior 30207 inner ring 30207 taper roller
bearing without separable inner or outer ri R30207 rodamiento de rodillos bearing
cónicos
aro interior separable del rodamiento de agujas IR 6x9x12 aro interior
IR IR 6x9x12 inner ring of needle
separate inner ring of neddle roller bearing IR 6x9x12 rodamiento de agujas roller bearing
agujas axiales y jaula ensamblados K45x50x27 agujas y K45x50x27needle roller and cage
K needle roller and cage thrust assembly
K 45x50x27 jaula ensamblada assemblies
agujas axiales y jaula ensamblados AXK 1024 rodamiento AXK 1024 needle roller thrust
AXK needle roller and cage thrust assembly AXK 1024 axial de agujas bearings
arandela de eje de rodamiento axial de rodillos arandela del eje del
cilindricos rodamiento axial de shaft washer of cylindrical roller
WS WS 81138 rodillos cilindricos
shaft washer of cylindrical roller thrust bearings
thrust bearing 81138
81138
arandela de alojamiento de rodamiento axila arandela del alojamiento housing washer of cylindrical roller
de rodillos cilindricos GS 81156 del rodamiento axial de
GS thrust bearing 81156
housing washer of cylindrical roller thrust bearings
rodillos cilindricos
81156
aro desmontable del rodamiento de rodillos aro desmontable NUP
cilíndricos loose rib NUP 220E cylindrical
BO BO NUP 220E 220E rodamiento de roller bearing
loose rib of a cylindrical roller bearings rodillos cilindricos
rodamientos de acero inoxidable rodamiento rígido de deep groove ball bearing 6206 of
SS SS 6206 bolas 6206 de acero stainless steel
stainless steel bearings inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
28 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Dimensiones principales y sistema de denominación
Main dimensions and code number of bearings
rodamientos de rodillos cónicos 323 313 303 332 322 302 331 330
3
taper roller bearings 320 329
rodamientos axiales de bolas 544 524 543 523 542 522 534 514
5
thrust ball bearings 533 513 532 512 511 510 591 590
rodamientos rígidos de bolas 6(0)4 623 6(0)3 622 6(0)2 60(2) 16(0)1 630
6
deep groove ball bearings 6(1)0 16(0)0 619 609 618 608
rodamientos de bolas con contacto angular 7(0)4 7(0)3 7(0)2 7(1)0 719 718 708
7
angular contact ball bearings
rodamientos axiales de rodillos cilíndricos 814 894 874 813 893 812 811
8
cylindrical roller thrust bearings
0 0 0 0 0
Series de rodamientos
Bearings series
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 29
Dimensiones principales y sistema de denominación
Main dimensions and code number of bearings
SUFIJOS (SUFFIXES)
Diseño interno
Internal design
Diferencias o alteraciones en el diseño interno del rodamiento, identificados por los sufijos; A,B, C, D, E
Ejemplo Rodamiento de una hilera de bolas con contactoa angular, angulo de contacto 40º
7201B
Example Single row angular contact ball bearings, contact angle 40º
Diseño externo
External design
Descripcion Ejemplo
Description Example
agujero cónico 1:12 rodamiento de doble hilera de double row cylindrical roller bearing
K NN3006K.M.W3
tapered bore 1:12 rodillos cilíndricos K 1:12 K 1:12
agujero cónico 1:30 rodamiento de rodillos esféricos
K30 241/560 K30.MB spherical roller bearing K 1:30
tapered bore 1:30 K 1:30
1 placa de protección rodamiento rígido de bolas con 1 deep groove ball bearing with 1
Z 6201Z
1shield placa de protección shield
2 placas de protección rodamiento rígido de bolas con 2 deep groove ball bearing with 2
2Z 62012Z
2 shields placa de protección shield
1 placa de obsturación rodamiento rígido de bolas con 1
RS 6201 RS deep groove ball bearing with 1 seal
1 seal placa de obsturación
2 placas de obsturación rodamiento rígido de bolas con 2
2RS 6201.2RS deep groove ball bearing with 2 seal
2 seals placa de obsturación
ranura para anillo elástico en el aro exterior rodamiento rígido de bolas con deep groove ball bearing with snap
N 6011N
snap ring groove in the outer ring agujero para anillo ring groove
ranura para anillo elástico con el anillo rodamiento rígido de bolas con deep groove ball bearing with snap
NR 6011RN
snap ring groove with snap ring agujero para anillo y anillo ring groove and snap ring
ranura para anillo elástico en el aro exterior y placa
rodamiento rígido de bolas con
protección deep groove ball bearing with snap
ZN 6011ZN agujero para anillo y placa de
ring groove and shield
snap ring groove in the outer ring and shield protección
ranura para anillo elástico con el anillo y placa
rodamiento rígido de bolas con
protección deep groove ball bearing with snap
ZNR 6011.ZNR agujero para anillo con el anillo
ring groove con snap ring and shield
snap ring groove with snap ring and shield y placa protección
ranura para anillo elástico en el aro exterior y 2
rodamiento rígido de bolas con
placa protección deep groove ball bearing with snap
.2ZN 6011.2ZN agujero para anillo y 2 placa de
ring groove and 2 shield
snap ring groove in the outer ring and 2 shield protección
ranura para anillo elástico con el anillo y 2 placa
rodamiento rígido de bolas con deep groove ball bearing with snap
protección
.2ZNR 6011.2ZNR agujero para anillo con el anillo ring groove con snap ring and 2
snap ring groove with snap ring and 2 shield y 2 placa protección shield
Jaula mecanizada de acero o fundición especial Jaula con muesca de lubricación en la superficie de rodadura
F S
Solid cage made from steel or iron Cage with lubricating slots in its guiding surfaces.
Jaula mecanizada de aleacción ligera
L
Solid cage made from light metal alloy
Jaula de poliamida
TN
Polyamide cage
Rodamiento lleno de rodillos (sin jaula)
V
Full complement cylindrical roller bearing (without cage)
Rodamiento lleno de rodillos, con el conjunto de rodillos
no separable
VH
Full complement cylindrical roller bearing, with self retaining
roller set
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
30 - WWB
Dimensiones principales y sistema de denominación
Main dimensions and code number of bearings
Vibraciones
Running noise
Nivel de vibración inferior al normal
SQ6
Lower running noise than standard
Especial designación para motores
SQ6E
Special design for electric motor
Lubricación
Lubrication
Ranura y 3 agujeros lubricación en el anillo exterior
W33
Groove and 3 lubrication hole in the outer ring
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 31
Precisión de giro de los rodamientos
Bearings precision
dmp = dps max + dps min dmp = dps max + dps min
2 2
dmp desviación del diámetro medio del agujero dmp deviation of mean bore diameter from nominal
con respecto al nominal [ m] [ m]
dmp = dmp - d dmp = dmp - d
ds desviación de un diámetro individual del ds deviation of a single bore diameter from nominal
agujero con respecto al nominal [ m] [ m]
ds diámetro individual del agujero [mm] ds single bore diameter [mm]
ds = ds - d ds = ds - d
Vdp variation of bore diameter in one radial plane
Vdp variación del diámetro del agujero [ m]
[ m]
Vdp = dps max - dps min Vdp = dps max - dps min
Vdmp variación del diámetro medio del agujero Vdmp variation of bore diameter, different between
(diferencia entre el mayor y el menor) [ m] largest and smallest [ m]
Vdmp = dmp max - dmp min Vdmp = dmp max - dmp min
D diámetro nominal exterior [mm] D nominal outer diameter [mm]
Dmp diámetro medio exterior en un plano radial Dmp mean outer diameter in one radial plane [mm]
[mm]
Dps max diámetro máximo exterior en un plano radial Dps max largest outer diameter in one radial plane [mm]
[mm]
Dps min diámetro mínimo exterior en un plano radial Dps min smallest outer diameter in one radial plane [mm]
[mm]
Dmp = Dps max + Dps min Dmp = Dps max + Dps min
2 2
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
32 - WWB
Precisión de giro de los rodamientos
Bearings precision
Dmp desviación del diámetro medio exterior con Dmp deviation of mean outer diameter from nominal
respecto al nominal [ m] [ m]
Dmp = Dmp - D
Dmp = Dmp - D
desviación de un diámetro individual del Ds deviation of a single outer diameter from nominal
Ds
exterior con respecto al nominal [ m] [mm]
Ds = Ds - D Ds = Ds - D
VDmp variación del diámetro medio exterior,
VDmp variation of mean outer diameter, difference
diferencia entre el mayor y el menor de los
between largest and smallest mean bore diameter
diámetros medios del agujero [ m]
[ m]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 33
Precisión de giro de los rodamientos
Bearings precision
Diametro nominal Desviación Desviación Agujero cónico 1:12 Agujero cónico 1:30
Nominal bore
Desviation
dmp
Desviation
ds
Bore taper 1:12 Bore taper 1:30
diameter
d [mm] PN (PO) P6 P5 P4 P2 P4 P2 PN PN
Hasta
Mas de Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. d 1mp- d 1mp-
(incl.) Vdp Vdp
Over to (incl) high Low high Low high Low high Low high Low high Low high Low dmp dmp
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
34 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Precisión de giro de los rodamientos
Bearings precision
d [mm] PN P6 P5 P4 P2 P5 P4 P2 P5 P4 P2
Hasta
Mas de
(incl.) Max Max Max Max Max Max Max Max Max Max Max
Over to (incl)
0,6 2,5 10 5 4 2,5 1,5 7 3 1,5 7 3 1,5
2,5 10 10 6 4 2,5 1,5 7 3 1,5 7 3 1,5
10 18 10 7 4 2,5 1,5 7 3 1,5 7 3 1,5
18 30 13 8 4 3 2,5 8 4 1,5 8 4 2,5
30 50 15 10 5 4 2,5 8 4 1,5 8 4 2,5
50 80 20 10 5 4 2,5 8 5 1,5 8 5 2,5
80 120 25 13 6 5 2,5 9 5 2,5 9 5 2,5
120 150 30 18 8 5 2,5 10 6 2,5 10 7 2,5
150 180 30 18 8 6 5 10 6 4 10 7 5
180 250 40 20 10 8 5 11 7 5 13 8 5
250 315 50 25 13 - - 13 - - 15 - -
315 400 60 30 15 - - 15 - - 20 - -
400 500 65 35 - - - - - - - - -
500 630 70 40 - - - - - - - - -
630 800 80 - - - - - - - - - -
800 1000 90 - - - - - - - - - -
1000 1250 100 - - - - - - - - - -
1250 1600 120 - - - - - - - - - -
1600 2000 140 - - - - - - - - - -
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 35
Precisión de giro de los rodamientos
Bearings precision
Diametro
Desviacion Desviación Variación
nominal
Nominal bore Dmp Ds Dmp
Desviation Desviation Variation
diameter
d [mm] PN (PO) P6 P5 P4 P2 P4 P2 PN P6 P5 P4 P2
Hasta
Mas de Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf.
(incl.) Max Max Max Max Max
Over to (incl) high Low high Low high Low high Low high Low high Low high Low
2,5 6 0 -8 0 -7 0 -5 0 -4 0 -2,5 0 -4 0 -2,5 6 5 3 2 1,5
6 18 0 -8 0 -7 0 -5 0 -4 0 -2,5 0 -4 0 -2,5 6 5 3 2 1,5
18 30 0 -9 0 -8 0 -6 0 -5 0 -4 0 -5 0 -4 7 6 3 2,5 2
30 50 0 -11 0 -9 0 -7 0 -6 0 -4 0 -6 0 - 8 7 4 3 2
50 80 0 -13 0 -11 0 -9 0 -7 0 -4 0 -7 0 -4 10 8 5 3,5 2
80 120 0 -15 0 -13 0 -10 0 -8 0 -5 0 -8 0 -5 11 10 5 4 2,5
120 150 0 -18 0 -15 0 -11 0 -9 0 -5 0 -9 0 -5 14 11 6 5 2,5
150 180 0 -25 0 -18 0 -13 0 -10 0 -7 0 -10 0 -7 19 14 7 5 3,5
180 250 0 -30 0 -20 0 -15 0 -11 0 -8 0 -11 0 -8 23 15 8 6 4
250 315 0 -35 0 -25 0 -18 0 -13 0 -8 0 -13 0 -8 26 19 9 7 4
315 400 0 0 0 -28 0 -20 0 -15 0 -10 0 -15 0 -10 30 21 10 8 5
400 500 0 -45 0 -33 0 -23 - - - - - - - - 34 25 12 - -
500 630 0 -50 0 -38 0 -28 - - - - - - - - 38 29 14 - -
630 800 0 -75 0 -45 0 -35 - - - - - - - - 55 34 18 - -
800 1000 0 -100 0 -60 - - - - - - - - - - 75 45 - - -
1000 1250 0 -125 - - - - - - - - - - - - - - - - -
1250 1600 0 -160 - - - - - - - - - - - - - - - - -
1600 2000 0 -200 - - - - - - - - - - - - - - - - -
2000 2500 0 -250 - - - - - - - - - - - - - - - - -
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
36 - WWB
Precisión de giro de los rodamientos
Bearings precision
Nominal bore
diameter
Radial runout K ea
Outside inclination
variation
SD axial runout S ea Width variation VCs
d [mm] PN P6 P5 P4 P2 P4 P2 PN P6 P5 P4 P5 P4 P2
Hasta
Mas de
(incl.) Max Max Max Max Max Max Max Max Max Max Max Max Max Max
Over to (incl)
2,5 6 15 8 5 3 1,5 8 4 1,5 8 5 1,5 5 2,5 1,5
6 18 15 8 5 3 1,5 8 4 1,5 8 5 1,5 5 2,5 1,5
18 30 15 9 6 4 2,5 8 4 1,5 8 5 2,5 5 2,5 1,5
30 50 20 10 7 5 2,5 8 4 1,5 8 5 2,5 5 2,5 1,5
50 80 25 13 8 4 4 8 4 1,5 10 5 4 6 3 1,5
80 120 35 18 10 56 5 9 5 2,5 11 6 5 8 4 2,5
120 150 40 20 11 7 5 10 5 2,5 13 7 5 8 5 2,5
150 180 45 23 13 8 5 10 5 2,5 14 8 5 8 5 2,5
180 250 50 25 15 10 7 11 7 4 15 10 7 10 7 4
250 315 60 35 18 11 7 13 8 5 18 10 7 11 7 5
315 400 70 30 20 13 8 13 10 7 20 13 8 13 8 7
400 500 80 40 23 - - 15 - - 23 - - 15 - -
500 630 100 50 25 - - 18 - - 25 - - 18 - -
630 800 120 60 30 - - 20 - - 30 - - 20 - -
800 1000 140 75 - - - - - - - - - - - -
1000 1250 160 - - - - - - - - - - - - -
1250 1600 190 - - - - - - - - - - - - -
1600 2000 220 - - - - - - - - - - - - -
2000 2500 250 - - - - - - - - - - - - -
La precisión de ancho (PN y P6) v Cs es idéntica a v Bs del aro interior para el mismo rodamiento (página 35)
Width tolerance(PN y P6) v Cs is identical to v Bs of inner ring of the same bearing (page 35)
La precisión de ancho (PN, P6, P5, P4, P3, P2) Cs es idéntica a Bs del aro interior para el mismo rodamiento
(página 35)
Width tolerance (PN, P6, P5, P4, P3, P2) Cs is identical to Bs of inner ring of the same bearing (page 35)
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 37
Precisión de giro de los rodamientos
Bearings precision
10 18 0 -12 0 -12 0 -7 0 -5 0 -5 12 12 5 4 9 9 5 4
18 30 0 -12 0 -12 0 -8 0 -6 0 -6 12 12 6 5 9 9 5 4
30 50 0 -12 0 -12 0 -10 0 -8 0 -8 12 12 8 6 9 9 5 5
50 80 0 -15 0 -15 0 -12 0 -9 0 -9 15 15 9 7 11 11 6 5
80 120 0 -20 0 -20 0 -15 0 -10 0 -10 20 20 11 8 15 15 8 5
120 180 0 -25 0 -25 0 -18 0 -13 0 -13 25 25 14 10 19 19 9 7
180 250 0 -30 0 -30 0 -22 0 -15 0 -15 30 30 17 11 23 23 11 8
250 315 0 -35 0 -35 0 -25 - - - - 35 35 - - 26 26 - -
315 400 0 -40 0 -40 0 -30 - - - - 40 40 - - 30 30 - -
400 500 0 -45 - - 0 -35 - - - - 45 - - - - - - -
500 630 0 -50 - - 0 -40 - - - - 50 - - - - - - -
630 800 0 -75 - - 0 -75 - - - - 75 - - - - - - -
800 1000 0 -100 - - - - - - - - 100 - - - - - - -
Diametro variación
Variación radial Variación axial Desviacion
nominal horizontal
Nominal bore
Radial runout Kia Horizontal runout S d Axial runout Sia Desviation
∆Bs
diameter
d [mm] PN P6 P5 P4 P5 P4 P4 PN P6X P5 P4
Mas Hasta
Sup. Inf. Sup. Inf. Sup. Inf. Sup. Inf.
de (incl.)
Max Max Max Max Max Max Max
Over to (incl) high Low high Low high Low high Low
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
38 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Precisión de giro de los rodamientos
Bearings precision
Variación inclinación
Diametro nominal Variación horizontal Variación axial Desviacion
exterior
Nominal bore Outside inclination ∆Cs
Radial runout K ea SD Axial runout S ea Desviation
diameter variation
d [mm] PN P6X P5 P4 P5 P4 P4 P4
Hasta
Mas de Sup. Inf.
(incl.) Max Max Max Max Max Max Max
Over to (incl) high Low
10 18 18 18 6 4 8 4 5 0 -100
18 30 20 20 7 5 8 4 5 0 -100
30 50 25 25 8 5 8 4 5 0 -100
50 80 35 35 10 6 9 5 6 0 -100
80 120 40 40 11 7 10 5 7 0 -100
120 180 45 45 13 8 10 5 8 0 -100
180 250 50 50 15 10 11 7 10 0 -100
250 315 60 60 18 11 13 8 10 0 -100
315 400 70 70 20 13 13 10 13 0 -100
400 500 78 78 - - - - - 0 -100
500 630 100 100 - - - - - 0 -100
630 800 - - - - - - - - -
800 1000 - - - - - - - - -
1000 1250 - - - - - - - - -
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 39
Precisión de giro de los rodamientos
Bearings precision
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
40 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Precisión de giro de los rodamientos
Bearings precision
Desviacion Variacion
Diametro nominal Variacion
Desviation Variation
Arandela alojamiento
Housing washer
Desviacion Variacion
Diametro nominal Variacion
Desviation Variation
Nominal bore
diameter
∆dmp Vdp Variation
Se
d [mm] PN,P6,P5 P4 PN,P6,P5 P4 PN P6 P5 P4
Hasta
Mas de Sup. Inf. Sup. Inf.
(incl.) max max max max max max
Over to (incl) high Low high Low
10 18 0 -11 0 -7 8 5 10 5 3 2
18 30 0 -13 0 -8 10 6 10 5 3 2
30 50 0 -16 0 -9 12 7 10 6 3 2
50 80 0 -19 0 -11 14 8 10 7 4 3
80 120 0 -22 0 -13 17 10 15 8 4 3
120 180 0 -25 0 -15 19 11 15 9 5 4
180 250 0 -30 0 -20 23 15 20 10 5 4
250 315 0 -35 0 -25 26 19 25 13 7 5
315 400 0 -40 0 -28 30 21 30 15 7 5
400 500 0 -45 0 -33 34 25 30 18 9 6
500 630 0 -50 0 -38 38 29 35 21 11 7
630 800 0 -75 0 -45 55 34 40 25 13 8
800 1000 0 -100 - - 75 - 45 30 15 -
1000 1250 0 -125 - - - - 50 35 18 -
1250 1600 0 -160 - - - - - - - -
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 41
Límite de velocidad de los rodamientos
Bearing limit rotational speed
La velocidad de los rodamientos está principalmente The rotational of the bearing is mainly restricted by the
restringida por el aumento en la temperatura debido a la increase in temperature due to the frictional heat generated
fricción generada por el calor dentro del rodamiento. inside the bearing. When the rotational speed exceeds
Cuando la velocidad de rotación excede cierto límite, se certain limit, the bearing shall fail to continue to rotate due
producirá el fallo del rodamiento por el calor generado. to the burns. Limit rotational speed of bearing indicates
La velocidad límite de rotación del rodamiento indica el the limit value of the rotational speed when there is no
limite de la capacidad de disipara el calor de un rodamiento. frictional heat that leads to the burns and the bearing can
Por ello, el límite de velocidad de los rodamientos está continuously rotate.
sujeto al tipo de rodamiento, dimensiones, precisión Therefore, the limit rotational speed of the bearing is
método de lubricación, calidad y cantidad de lubricante, subject to the bearing type, dimensions, precision,
material y diseño de la jaula y otros. lubrication method, quality and amount of lubricant, material
El límite de la velocidad para diferentes tipos de and design of cage and other factors.
rodamientos usando grasa lubricante y aceite lubricante The limit rotational speed for different types of bearings
respectivamente se da en las tablas correspondientes a using grease lubrication and oil lubrication are respectively
cada serie. Estos valores indican los valores límites de given in the dimension tables of these bearings. These
velocidad para rodamientos de diseño normal, bajo values indicate the limit values of rotation speed the
condiciones normales de carga, (C/P=13, Fa/Fr=0.25). bearings of normal design under normal loading conditions
(C/P=13, Fa/Fr=0.25).
dinámica equivalente P excede a la capacidad de carga dynamic load P exceeds basic dynamic load rating C by
C en 8%), o la carga axial excede de la carga radial en 8% or so ), or the axial load exceeds the radial load by
over 25% in the combined load, The correction of limit
aproximadamente 25% en una combinación de cargas,
speed is applied in the next formula:
la corrección del límite de velocidad se aplica en la
siguiente fórmula:
na = f1xf2xn
na: la corrección del límite de velocidad de rotación [rpm] n a : the correction limit rotational speed [rpm]
f1: El factor de corrección relativo a las condiciones de f1: the correction factor related to the loading condition
carga (grafico 1) (graphic 1)
f2: El factor de corrección relativo a las combinación de f2: the correction factor related to the combined load
carga (grafico 2) (graphic 2)
n: Límite de velocidad bajo condiciones de carga normales, n: the limit rotational speed under normal load conditions,
[rpm] (ver las dimensiones de tabla de cada serie). [rpm] (see dimensions tables of all bearings).
C: capacidad de carga dinámica [kN] C: the basic dynamic load rating [kN]
P: carga dinámica equivalente [kN] P: the equivalent dynamic load [kN]
Fa: carga radial kN] Fa: radial load [kN]
Fr: carga axial [kN] Fr: axial load [kN]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
42 - WWB
Límite de velocidad de los rodamientos
Bearing limit rotational speed
Factor de corrección f1
relativo a las condiciones de carga (gráfico 1)
The correction factor f1
relative to load condition (graphic 1)
Factor de corrección f2
relativo a las condiciones de carga (grafica 2)
The correction factor f2
relative to load condition (graphic 2)
LIMITE DE VELOCIDAD DE LOS RODAMIENTOS DE THE LIMIT ROTATIONAL SPEED OF BALL BEARINGS
BOLAS CON PLACAS DE OBTURACIÓN UIT SEALS
El límite de velocidad de los rodamientos de bolas con The limit rotational speed of the ball bearings with contact
placas de obturación (RS y 2RS), está limitado por la seals (RS y 2RS), is confined by the linear speed of the
velocidad de deslizamiento de las superficies de contacto contact surface of the seals. The allowable linear speed
de las placas de obturación. La velocidad de deslizamiento depends on the rubber quality of the seals.
permisible depende de las cualidades del caucho de las
placas de obturación.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 43
Límite de velocidad de los rodamientos
Bearing limit rotational speed
Cuando los rodamientos rotan a alta velocidad, When the bearing rotates at high speed, especially at
especialmente a velocidad de rotación igual o superior al rotational speed approaching or exceeding the limit
límite indicado en las tablas, se deberían seguir los rotational speed given in the dimensional, attention must
siguientes pasos: be paid to the following issues:
1. Aplicación adecuada del rodamiento. 1. Apply precise bearings.
2. Analizar el juego interno del rodamiento 2. Analyze the internal clearance of the bearing
(teniendo en cuenta la disminución provocada ( taking the reduction in internal clearance
por el incremento de temperatura). caused by the temperature increase into
3. Analizar el tipo de material de la jaula (para consideration).
altas velocidades de rotación). 3. Analyze the type of material of the cage (for
4. Analizar el método de lubricación.. high speed rotation).
4. Analyze the lubricating method
El par de rozamiento de los rodamientos puede calcularse The frictional torque of rolling bearings can be calculated
de acuerdo al diámetro interior de los rodamientos. according to the diameter of the bearing;
M = µp d2
M: par de rozamiento [kN] M: frictional torque [kN]
µ: factor de fricción (siguiente tabla) µ: frictional factor (next table)
P: carga del rodamiento [kN] P: load of the bearing [kN]
d: diámetro interior nominal [mm] d: nominal bore diameter [mm]
El factor de fricción µ depende del tipo, la carga, la The frictional factor µ is greatly influenced by the bearing
velocidad y lubricación del rodamiento. Los valores para type, load, rotational speed and lubrication. The reference
cada serie se da en la siguiente tabla. for all serie are given in the next table.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
44 - WWB
Ajuste de los rodamientos
Fits of bearings
TOLERANCIA DIMENSIONAL Y AJUSTE DEL EJE Y DIMENSIONAL TOLERANCES AND FITS OF SHAFT
EL ALOJAMIENTO AND HOUSING
La relación del ajuste entre la tolerancia dimensional del The fit relations between the dimensional tolerances of
eje y el alojamiento, y el agujero y el rodamiento con the shaft and housing , bore and bearing with P0 class
precisión clase P0 se presenta a continuación. precision degree are given to next:
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 45
Ajuste de los rodamientos
Fits of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
46 - WWB
Ajuste de los rodamientos
Fits of bearings
Naturaleza de la carga y relación con de ajuste Nature of load and relations with fit.
Si la carga del rodamiento es grande o esta vibrando o If the bearing load is big or there is vibrating or shock
es de impacto, los ajustes de apriete crecerán. Si es load, the interference fit should be increased. If high
necesaria una precisión de giro alta, la precisión del eje rotation precision is required, the high precision of the
y del conjunto del rodamiento deberá ser incrementada, shaft or bearing box should be increased to avoid too
para obtener un mayor apriete. Si la interferencia es much interference fit. If the interference is too big, the
demasiado grande, puede verse afectada la geometría geometric precision of the shaft or bearing box shall affect
del rodamiento, y este ser dañado. the geometric shape of the bearing rings, and accordingly
Cuando los rodamientos son del tipo no separables damage the bearing rotation precision.
(rodamiento rígido de bolas), tanto para el anillo interior When the bearings are non separable bearings (deep
como para el exterior se le aplica un ajuste estático, pero groove ball bearings), both inner ring and outer ring adopt
el montaje y el desmontaje es muy costoso. static fits, the mounting and dismounting of bearing is very
inconvenient.
Efectos de la naturaleza de la carga Effects of the load nature
De acuerdo a la naturaleza de la carga, la carga del According to its nature, bearing load can be divided into
rodamiento se puede dividir en carga de rotación sobre inner ring rotation load, outer ring rotation load and
aro exterior y carga de rotación sobre aro interior, y carga indeterminate direction load. The relations between them
de dirección indeterminada. La relación entre ellos se da and the fit are shown in the previous table.
en el cuadro anterior.
Efectos de la magnitud de la carga Effects of load magnitude
Un aro interior sometido a carga radiales se comprime y For inner ring with radial load, it is both compressed and
se expande simultáneamente en direcciones radiales expanded in the radial direction, and the circumference
perpendiculares entre si. Produciendo una holgura que tends to increase slightly, therefore the initial interference
lleva a la disminución de la magnitud del ajuste por will decrease.
interferencia.
Efectos de la temperatura Effects of temperature
Generalmente, la temperatura de funcionamiento del Generally the bearing temperature in operation is higher
rodamiento es más alta que la temperatura ambiente y than the surrounding temperature, and if the bearing
si el rodamiento gira con carga, la temperatura del aro rotates with load, the temperature of the inner ring is
interior es mayor que la del eje, esta dilatación por calor higher than of the shaft, and the heat expansion shall
reduce el juego efectivo. reduce the effective interference.
Si se tiene en cuenta que la diferencia de temperatura Now assume the temperature difference between that
entre la existente en el interior del rodamiento y la del inside the bearing and the surrounding temperature of the
alojamiento es ∆t, se puede decir que la diferencia de housing is ∆t, we can presume that the temperature
temperatura entre el aro interior y el eje sobre la superficie difference between the inner ring and the shaft on the fit
de montaje es (0,10~0,15)∆t. surface is approximately (0,10~0,15)∆t.
Máxima fatiga dentro del rodamiento causada por el ajuste The maximum stress inside the bearing caused by the fit
Cuando se monta el rodamiento con ajuste de apriete, When mounting the bearing with interference fit, the rings
los anillos pueden expandirse o contraerse debido a la sometimes may expand or contract, bringing about stress.
fatiga.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 47
Juego interno
Internal clearance
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
48 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Juego interno
Internal clearance
2,5 6 0 7 2 13 8 23 - - - -
6 10 0 7 2 13 8 23 14 29 20 37
10 18 0 9 3 18 11 25 18 33 25 45
18 24 0 10 5 20 13 28 20 36 28 48
24 30 1 11 5 20 13 28 23 41 30 53
30 40 1 11 6 20 15 33 28 46 50 64
40 50 1 11 6 23 18 36 30 51 45 73
50 65 1 15 8 28 23 43 38 61 55 90
65 80 1 15 10 30 25 51 46 71 65 105
80 100 1 18 12 36 30 58 53 84 75 120
100 120 2 20 15 41 36 66 61 97 90 140
120 140 2 23 18 48 41 81 71 114 105 160
140 160 2 23 18 53 46 91 81 130 120 180
160 180 2 25 20 61 53 102 91 147 135 200
180 200 2 30 25 71 63 117 107 163 150 230
200 225 4 32 28 82 73 132 120 187 175 255
225 250 4 36 31 92 87 152 140 217 205 290
250 280 4 39 36 97 97 162 152 237 225 320
280 315 8 45 42 110 110 180 175 260 260 360
315 355 8 50 50 120 120 200 200 290 290 405
355 400 8 60 60 140 140 230 230 330 330 460
400 450 10 70 70 160 160 260 260 370 370 520
450 500 10 80 80 180 180 290 290 410 410 570
500 560 20 90 90 200 200 320 320 460 460 630
560 630 20 100 100 220 220 350 350 510 510 700
630 710 30 120 120 250 250 390 390 560 560 780
710 800 30 130 130 280 280 440 440 620 620 860
800 900 30 150 150 310 310 490 490 690 690 960
900 1000 40 160 160 340 340 540 540 760 760 1040
1000 1120 40 170 170 370 370 590 590 840 840 1120
1120 1250 40 180 180 400 400 640 640 910 910 1220
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 49
Juego interno
Internal clearance
Diametro nominal Juego del rodamiento (agujero cilíndrico) Juego del rodamiento (agujero cónico)
Nominal bore
Clearance of bearing (cylindrical bore) Clearance of bearing (tapered bore)
diameter
d [mm] C2 Normal (CN) C3 C4 C5 C2 Normal (CN) C3 C4 C5
Hasta
Mas de
(incl.)
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Over to (incl)
2,5 6 1 8 5 15 10 20 15 25 21 33 - - - - - - - - - -
6 10 2 9 6 17 12 25 19 33 27 42 - - - - - - - - - -
10 14 2 10 6 19 13 26 21 35 30 48 - - - - - - - - - -
14 18 3 12 8 21 15 28 23 37 32 50 - - - - - - - - - -
18 24 4 14 10 23 17 30 25 39 34 52 7 17 13 26 20 33 28 42 37 55
24 30 5 16 11 24 19 35 29 46 40 58 9 20 15 28 23 39 33 50 44 62
30 40 6 18 13 29 23 40 34 53 46 66 12 24 19 35 29 46 40 59 52 72
40 50 6 19 14 31 25 44 37 57 50 71 14 27 22 39 33 52 45 65 58 79
50 65 7 21 16 36 30 50 45 69 62 88 18 32 27 47 41 61 56 80 73 99
65 80 8 24 18 40 35 60 54 83 76 108 23 39 35 57 50 75 69 98 91 123
80 100 9 27 22 48 42 70 64 96 89 124 29 47 42 68 62 90 84 116 109 144
100 120 10 31 25 56 50 83 75 114 105 145 35 56 50 81 75 108 100 139 130 170
120 140 10 38 30 68 60 100 90 135 125 175 40 68 60 98 90 130 120 165 155 205
140 160 15 44 35 80 70 120 110 161 150 210 45 74 65 110 100 150 140 191 180 240
Nominal bore µm µm
Clearance of bearing cylindrical bore Clearance of bearing tapered bore
diameter
d [mm] C2 Normal (CN) C3 C4 C5 C2 Normal (CN) C3 C4 C5
Hasta
Mas de
(incl.) Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Over to (incl)
- 10 0 25 20 45 35 60 50 75 75 100 - - - - - - - - - -
10 24 0 25 20 45 35 60 50 75 75 100 15 40 30 55 40 65 50 75 75 100
24 30 0 25 20 45 35 60 50 75 75 100 20 45 35 60 45 70 55 80 80 105
30 40 5 30 25 50 45 70 60 85 85 110 20 45 40 65 55 80 70 95 95 120
40 50 5 35 30 60 50 80 70 100 100 130 25 55 45 75 60 90 75 105 105 135
50 65 10 40 40 70 60 90 80 110 110 140 30 60 50 80 70 100 90 120 120 150
65 80 10 45 40 75 65 100 90 125 125 160 35 70 60 95 85 120 110 145 145 180
80 100 15 50 50 85 75 110 105 140 140 175 40 75 70 105 95 130 120 155 155 190
100 120 15 55 50 90 85 125 125 165 165 205 50 90 90 130 115 155 140 180 180 220
120 140 15 60 60 105 100 145 145 190 190 235 55 100 100 145 130 175 160 205 205 250
140 160 20 70 70 120 115 165 165 215 215 265 60 110 110 160 145 195 180 230 230 280
160 180 25 75 75 125 120 170 170 220 220 270 75 125 125 175 160 210 195 245 245 295
180 200 35 90 90 145 140 195 195 250 250 305 85 140 140 195 180 235 220 275 275 330
200 225 45 105 105 165 160 220 220 280 280 340 95 155 155 215 200 260 245 305 305 365
225 250 45 110 110 175 170 235 235 300 300 365 105 170 170 235 220 285 270 335 335 400
250 280 55 125 125 195 190 260 260 330 330 400 115 185 185 255 240 310 295 365 365 435
280 315 55 130 130 205 200 275 275 350 350 425 130 205 205 280 265 340 325 400 400 475
315 355 65 145 145 225 225 305 305 380 385 465 145 225 225 305 290 370 355 435 435 515
355 400 100 190 190 280 280 370 370 460 460 550 165 255 255 345 330 420 405 495 495 585
400 450 110 210 210 310 310 410 410 510 510 610 185 285 285 385 370 470 455 555 555 655
450 500 110 220 220 330 330 440 440 550 550 660 205 315 315 425 410 520 505 615 615 725
500 560 120 240 240 360 360 480 480 600 600 720 230 350 350 470 455 575 560 680 680 800
560 630 140 260 260 380 380 500 500 620 620 740 260 380 380 500 500 620 620 740 740 860
630 710 145 285 285 425 425 565 565 705 705 845 295 435 435 575 565 705 695 835 835 975
710 800 150 310 310 470 470 630 630 790 790 950 325 485 485 645 630 790 775 935 935 1095
800 900 180 350 350 520 520 690 690 860 860 1030 370 540 540 710 700 870 860 1030 1030 1200
900 1000 200 390 390 580 580 770 770 960 960 1150 410 600 600 790 780 970 960 1150 1150 1340
1000 1120 220 430 430 430 430 850 850 1060 1060 1270 455 665 665 875 865 1075 1065 1275 1275 1485
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
50 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Juego interno
Internal clearance
Diametro nominal Juego del rodamiento agujero cilíndrico Juego del rodamiento agujero cónico
Nominal bore µm µm
Clearance of bearing cylindrical bore Clearance of bearing tapered bore
diameter
d [mm] C2 Normal (CN) C3 C4 C5 C2 Normal (CN) C3 C4 C5
Hasta
Mas de
(incl.) Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Over to (incl)
14 18 10 20 20 35 35 45 45 60 60 75 - - - - - - - - - -
18 24 10 20 20 35 35 45 45 60 60 75 15 25 25 35 35 45 45 65 65 75
24 30 15 25 25 40 40 55 55 75 75 95 20 30 30 40 40 55 55 75 75 95
30 40 15 30 30 45 45 60 60 80 80 100 25 35 35 50 50 65 65 85 85 105
40 50 20 35 35 55 55 75 75 100 100 125 30 45 45 60 60 80 80 100 100 130
50 65 20 40 40 65 65 90 90 120 120 150 40 55 55 75 75 95 95 120 120 160
65 80 30 50 50 80 80 110 110 145 145 180 50 70 70 95 95 120 120 150 150 200
80 100 35 60 60 100 100 135 135 180 180 225 55 80 80 110 110 140 140 180 180 230
100 120 40 75 75 120 120 160 160 210 210 260 65 100 100 135 135 170 170 220 220 280
120 140 50 95 95 145 145 190 190 240 240 300 80 120 120 160 160 200 200 260 260 330
140 160 60 110 110 170 170 220 220 280 280 350 90 130 130 180 180 230 230 300 300 380
160 180 65 120 120 180 180 240 240 310 310 390 100 140 140 200 200 260 260 340 340 430
180 200 70 130 130 200 200 260 260 340 340 430 110 160 160 220 220 290 290 370 370 470
200 225 80 140 140 220 220 290 290 380 380 470 120 180 180 250 250 320 320 410 410 520
225 250 90 150 150 240 240 320 320 420 420 520 140 200 200 270 270 350 350 450 450 570
250 280 100 170 170 260 260 350 350 460 460 570 150 220 220 300 300 390 390 490 490 620
280 315 110 190 190 280 280 370 370 500 500 630 170 240 240 330 330 430 430 540 540 680
315 355 120 200 200 310 310 410 410 550 550 690 190 270 270 360 360 470 470 590 590 740
355 400 130 220 220 340 340 450 450 600 600 750 210 300 300 400 400 520 520 650 650 820
400 450 140 240 240 370 370 500 500 660 660 820 230 330 330 440 440 570 570 720 720 910
450 500 140 26 26 410 410 550 550 720 720 900 260 370 370 490 490 630 630 790 790 1000
500 560 150 280 280 440 440 600 600 780 780 1000 290 410 410 540 540 680 680 870 870 1100
560 630 170 310 310 480 480 650 650 850 850 1100 320 460 460 600 600 760 760 980 980 1230
630 710 190 350 350 530 530 700 700 920 920 1190 350 510 510 670 670 850 850 1090 1090 1360
710 800 210 390 390 580 580 770 770 1010 1010 1300 390 570 570 750 750 960 960 1220 1220 1500
800 900 230 430 430 650 650 860 860 1120 1120 1440 440 640 640 840 840 1070 1070 1370 1370 1690
900 1000 260 480 480 710 710 930 930 1220 1220 1570 490 710 710 930 930 1190 1190 1520 1520 1860
Diametro
Juego axial del rodamiento
nominal
Nominal bore
µm
Axial clearance of bearing
diameter
d [mm] C2 Normal (CN) C3 C4
Hasta
Mas de
(incl.) Min Max Min Max Min Max Min Max
Over to (incl)
- 18 20 60 50 90 80 120 115 165
18 40 30 70 60 110 100 150 135 185
40 60 40 90 80 130 120 170 155 205
60 80 50 100 90 140 130 180 165 225
80 100 60 120 100 160 140 200 185 245
100 140 70 140 120 180 160 220 205 265
140 180 80 160 140 200 180 240 225 295
180 220 100 180 160 220 200 260 250 325
220 260 120 200 180 240 220 300 275 355
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 51
Juego interno
Internal clearance
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
52 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Lubricación de los rodamientos
Lubrication of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 53
Lubricación de los rodamientos
Lubrication of bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
54 - WWB
Aplicaciones de los rodamientos
Bearing applications
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 55
Aplicaciones de los rodamientos
Bearing applications
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
56 - WWB
Aplicaciones de los rodamientos
Bearing applications
Cylindrical bore bearings Press fit mounting with light shocks above a collar,
sleeve, etc.
Usando un manguito
Mounting above a shaft
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 57
Rodamientos rígidos de bolas
Deep groove ball bearings
Los rodamientos rígidos de bolas están diseñados para Deep groove ball bearings are designed to have a good
que tengan una buena capacidad de carga, tanto en load capacity in both axial and radial directions.
dirección axial como radial.
Los rodamientos rígidos de bolas de WWB se presentan WWB deep groove ball bearings have the following types:
de diferentes formas:
Rodamiento de una hilera de bolas, diseño básico Single row deep groove ball bearings, basic types.
Este tipo de rodamientos, abiertos por los dos lados, se Applications of this type, opens for two sides, can be
pueden encontrar en situaciones donde no hay unas found in situations where there are no special requirements
necesidades especiales de montaje y estanqueidad. for mounting and sealing.
Con uno o dos placas de protección (.Z y .2Z) en uno With one shield (.Z ) on one side or two shield (.2Z)
o ambos lados respectivamente. on both sides
Las placas de protección están hechos de chapa de acero, The shields are made of steel sheet, they press fitted into
están fijadas a presión en la ranura del aro exterior Durante the outer ring groove. Adequate lubricating grease has
el proceso de fabricación se le aplica grasa lubricante a been put in the deep groove ball bearings with two shields
los rodamientos y se colocan dos placas de protección, during manufacturing process and there is no need to
de este modo no es necesario ni lavarlos, ni lubricarlos heat or clean the bearing or add lubricant again. They can
de nuevo. Permitiendo utilizar los rodamientos a bear temperature range of between –10ºC and +130º C
temperaturas entre –10º C y +130º C It is non-contact seal, and compared with deep groove
Comparado con los rodamientos con placa de obturación, ball bearings with seals, they have less friction and suitable
tienen menos fricción y son apropiados en aplicaciones for applications with high rotational speed requirement.
donde la velocidad de rotación es elevada.
Con uno o dos placas de obturación (.RS y .2RS) en With one seal (.RS ) on one side or two seals ( .2RS)
uno o ambos lados respectivamente. on both sides.
Las placas de obturación están hechos de caucho, con The seals are made of rubber with steel sheet
chapa de acero reforzada, pudiendo soportar temperaturas reinforcement. They can bear temperature range of
de funcionamiento entre –10º C y 130º C. Están fijadas between –10º C and + 130º C.
entre los dos aros del rodamiento.
Comparado con las placas de protección, las placas de Compared with the shielded deep groove ball bearings,
obturación tienen mejor resistencia al polvo y al agua. they are better in terms of dust-resistance and water-
Sin embargo la fricción es mayor y la velocidad de rotación resistance. However, the friction shall be larger and the
disminuye. rotational speed is to certain extent limit.
Placas de obturación rozante Non-contacting seals
Para aplicaciones en las que se requieran altas velocidades For high speed and temperature applications, WWB has
y temperaturas, WWB dispone de unos rodamientos available deep groove ball bearings with non-contacting
rígidos de bolas con placas de obturación rozante. seal. They can bear temperature range of between
Temperatura de funcionamiento –10º C y 130º C. –10º C and +130º C
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
58 - WWB
Rodamientos rígidos de bolas
Deep groove ball bearings
JAULAS CAGES
Los rodamientos rígidos de bolas generalmente llevan Deep groove ball bearings generally use pressed cages
jaulas estampadas de chapa de acero o jaulas de bronce. of steel sheet or brass cages. When the outer diameter
Cuando el diámetro exterior del rodamiento es pequeño, is little, they use pressed cage with steel sheet and there
los rodamientos llevan jaulas estampadas de chapa de is no suffix in the bearings code number. When the outer
acero, Cuando el diámetro exterior del rodamiento es diameter is big, they use brass cages and there is no
grande los rodamientos llevan jaula de bronce. En ambos suffix in the bearing code number.
casos no llevan sufijo. en el número de rodamiento.
Algunos rodamientos rígidos de bolas WWB, son Several WWB deep groove ball bearings are produced
sometidos a pruebas y procesos especiales de ruido para having undergone additional processes and special noise
suministrar menores niveles de ruido. testing procedures to provide low running noise levels.
De acuerdo con los resultados de las prueba, los According to the test results the bearings can be divided
rodamientos pueden dividirse en dos clases into different class.
SQ6 menor ruido que el normal SQ6 Lower running noise than standard
SQ6E diseño especial para los motores eléctricos SQ6E Special design for electric motors.
PRECISIÓN TOLERANCES
Los rodamientos rígidos de bolas WWB, se fabrican de WWB single row deep grooved ball bearings are produced
forma estándar, con tolerancias normales (P0 o PN). to normal tolerance class (P0 o PN) as standard. Several
Algunos rodamientos se pueden suministrar también bearings are produced to higher precision tolerance classes
con las clases de tolerancia de precisión (P6, P5, P4 y (P6,P5,P4 and P2).
P2).
Los rodamientos rígidos de bolas WWB, se fabrican de WWB single row deep groove ball bearings are produced
forma estándar con juego interno radial normal (CN). with normal internal clearance (CN) as standard.
Las tolerancias para el juego normal son: Normal fits for this bearing are;
Tolerancia eje h5,j5,k5 Shaft fits h5,j5,k5
Tolerancia alojamiento H6,H7,J6,J7 Housing fits H6,H7,J6,J7
Los rodamientos rígidos de bolas WWB, también tienen WWB deep groove ball bearing are also produced to other
otros juegos radiales. internal clearances.
Los diferentes valores del juego interno para los Values of the different internal clearance groups of single
rodamientos rígidos de bolas de una y dos hileras, están and double row deep groove ball bearing are standardized
estandarizados conforme a la norma DIN 620 parte 4 ISO and conform to the valid international standards DIN 620
5753-1991. part 4 and ISO 5753-1991.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 59
Rodamientos rígidos de bolas
Deep groove ball bearings
Fa e
≤ P = Fr
Fr
Fa e P = X *F r + Y *F a
>
Fr
P 0 = 0,6 *F r + 0,5 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
60 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas
Deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 61
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
62 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 63
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 65
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
66 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
68 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 69
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
70 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 71
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
72 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de una hilera de bolas
Single row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 73
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
RODAMIENTOS RIGIDOS DE BOLAS CON SINGLE ROW DEEP GROOVE BALL BEARINGS
ANILLO DE ELÁSTICO WITH SNAP RING
Con una ranura en el aro exterior para albergar un With snap ring groove on the outer ring (-N).
anillo de retención (anillo elástico), (.N). The snap ring can be used to locate the bearing in the
Los anillos elásticos se utilizan para fijar el rodamiento axial direction so that the mounting in the housing is
en la dirección axial, y así facilitar el montaje en el simplified.
alojamiento.
Ranura para el anillo elástico DIN 616 Snap ring grooves DIN 616
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
74 - WWB
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 75
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
76 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
Dimensiones
Dimensions
Anillo elástico D1 D2 rg m
b f a
Snap ring (max) (max) (Kg)
SP30 28,17 34,7 1,35 1,12 2,06 0,4 0,03
SP30 28,17 34,7 1,35 1,12 2,06 0,4 0,03
SP30 28,17 34,7 1,35 1,12 2,06 0,4 0,03
SP32 30,15 36,7 1,35 1,12 2,06 0,4 0,04
SP32 30,15 36,7 1,35 1,12 2,06 0,4 0,04
SP32 30,15 36,7 1,35 1,12 2,06 0,4 0,04
SP35 33,17 39,7 1,35 1,12 2,06 0,4 0,043
SP35 33,17 39,7 1,35 1,12 2,06 0,4 0,043
SP35 33,17 39,7 1,35 1,12 2,06 0,4 0,043
SP40 38,1 44,6 1,35 1,12 2,06 0,4 0,063
SP40 38,1 44,6 1,35 1,12 2,06 0,4 0,063
SP40 38,1 44,6 1,35 1,12 2,06 0,4 0,063
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,11
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,11
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,11
SP42 39,75 46,3 1,35 1,12 2,06 0,4 0,065
SP42 39,75 46,3 1,35 1,12 2,06 0,4 0,065
SP42 39,75 46,3 1,35 1,12 2,06 0,4 0,065
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,105
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,105
SP47 44,6 52,7 1,35 1,12 2,46 0,4 0,105
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,148
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,148
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,148
SP47 44,6 52,7 1,35 1,12 2,06 0,4 0,08
SP47 44,6 52,7 1,35 1,12 2,06 0,4 0,08
SP47 44,6 52,7 1,35 1,12 2,06 0,4 0,08
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,125
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,125
SP52 49,73 57,9 1,35 1,12 2,46 0,4 0,125
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,232
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,232
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,232
SP55 52,6 60,7 1,35 1,12 2,06 0,4 0,115
SP55 52,6 60,7 1,35 1,12 2,06 0,4 0,115
SP55 52,6 60,7 1,35 1,12 2,06 0,4 0,115
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,192
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,192
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,192
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,348
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,348
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,348
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,151
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,151
SP62 59,61 67,7 1,9 1,7 3,28 0,6 0,151
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,288
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,288
SP72 68,81 78,6 1,9 1,7 3,28 0,6 0,288
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,458
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,458
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,458
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,928
SP68 64,82 74,6 1,9 1,7 3,28 0,6 0,188
SP68 64,82 74,6 1,9 1,7 3,28 0,6 0,188
SP68 64,82 74,6 1,9 1,7 3,28 0,6 0,188
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,366
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,366
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,366
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,632
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,632
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 77
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
78 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
Dimensiones
Dimensions
Anillo elástico D1 D2 rg m
b f a
Snap ring (max) (max) (Kg)
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,632
SP110 106,81 116,6 2,7 2,46 3,28 0,6 1,18
SP75 71,83 81,6 1,9 1,7 3,28 0,6 0,231
SP75 71,83 81,6 1,9 1,7 3,28 0,6 0,231
SP75 71,83 81,6 1,9 1,7 3,28 0,6 0,231
SP85 81,81 91,6 1,9 1,7 3,28 0,6 0,405
SP85 81,81 91,6 1,9 1,7 3,28 0,6 0,405
SP85 81,81 91,6 1,9 1,7 3,28 0,6 0,405
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,848
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,848
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,848
SP120 115,21 129,7 3,1 2,82 4,06 0,6 1,51
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,261
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,261
SP80 76,81 86,6 1,9 1,7 3,28 0,6 0,261
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,453
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,453
SP90 86,79 96,5 2,7 2,46 3,28 0,6 0,453
SP110 106,81 116,6 2,7 2,46 3,28 0,6 1,1
SP110 106,81 116,6 2,7 2,46 3,28 0,6 1,1
SP110 106,81 116,6 2,7 2,46 3,28 0,6 1,1
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,83
SP90 86,79 96,5 2,7 2,46 2,87 0,6 0,311
SP90 86,79 96,5 2,7 2,46 2,87 0,6 0,311
SP90 86,79 96,5 2,7 2,46 2,87 0,6 0,311
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,607
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,607
SP100 96,8 106,5 2,7 2,46 3,28 0,6 0,607
SP120 115,21 129,7 3,1 2,82 4,06 0,6 1,39
SP120 115,21 129,7 3,1 2,82 4,06 0,6 1,39
SP120 115,21 129,7 3,1 2,82 4,06 0,6 1,39
SP140 135,23 149,7 3,1 2,82 4,9 0,6 2,4
SP95 91,82 101,6 2,7 2,46 2,87 0,6 0,41
SP95 91,82 101,6 2,7 2,46 2,87 0,6 0,41
SP95 91,82 101,6 2,7 2,46 2,87 0,6 0,41
SP110 106,81 116,6 2,7 2,46 2,87 0,6 0,783
SP110 106,81 116,6 2,7 2,46 3,28 0,6 0,783
SP110 106,81 116,6 2,7 2,46 3,28 0,6 0,783
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,72
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,72
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,72
SP150 145,24 159,7 3,1 2,82 4,9 0,6 2,9
SP100 96,8 106,5 2,7 2,46 2,87 0,6 0,436
SP100 96,8 106,5 2,7 2,46 2,87 0,6 0,436
SP100 96,8 106,5 2,7 2,46 2,87 0,6 0,436
SP120 115,21 129,7 3,1 2,82 4,06 0,6 0,982
SP120 115,21 129,7 3,1 2,82 4,06 0,6 0,982
SP120 115,21 129,7 3,1 2,82 4,06 0,6 0,982
SP140 135,23 149,7 3,1 2,82 4,9 0,6 2,13
SP140 135,23 149,7 3,1 2,82 4,9 0,6 2,13
SP140 135,23 149,7 3,1 2,82 4,9 0,6 2,13
SP160 155,22 169,7 3,1 2,82 4,9 0,6 3,9
SP110 106,81 116,6 2,7 2,46 3,28 0,6 0,604
SP110 106,81 116,6 2,7 2,46 3,28 0,6 0,604
SP110 106,81 116,6 2,7 2,46 3,28 0,6 0,604
SP125 120,22 134,7 3,1 2,82 4,06 0,6 1,08
SP125 120,22 134,7 3,1 2,82 4,06 0,6 1,08
SP125 120,22 134,7 3,1 2,82 4,06 0,6 1,08
SP150 145,24 159,7 3,1 2,82 4,9 0,6 2,63
SP150 145,24 159,7 3,1 2,82 4,9 0,6 2,63
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 79
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
80 - WWB
Rodamientos rígidos de bolas, con anillo elástico
Deep groove ball bearings, with snap ring
Dimensiones
Dimensions
Anillo elástico D1 D2 rg m
b f a
Snap ring (max) (max) (Kg)
SP150 145,24 159,7 3,1 2,82 4,9 0,6 2,63
SP115 111,81 121,6 2,7 2,46 2,87 0,6 0,643
SP115 111,81 121,6 2,7 2,46 2,87 0,6 0,643
SP115 111,81 121,6 2,7 2,46 2,87 0,6 0,643
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,21
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,21
SP130 125,22 139,7 3,1 2,82 4,06 0,6 1,21
SP160 155,22 19,7 3,1 2,82 4,9 0,6 3,12
SP160 155,22 19,7 3,1 2,82 4,9 0,6 3,12
SP160 155,22 19,7 3,1 2,82 4,9 0,6 3,12
SP125 120,22 134,7 3,1 2,82 4,06 0,6 0,85
SP125 120,22 134,7 3,1 2,82 4,06 0,6 0,85
SP125 120,22 134,7 3,1 2,82 4,06 0,6 0,85
SP140 135,23 149,7 3,1 2,82 4,9 0,6 1,42
SP140 135,23 149,7 3,1 2,82 4,9 0,6 1,42
SP140 135,23 149,7 3,1 2,82 4,9 0,6 1,42
SP130 125,22 139,7 3,1 2,82 4,06 0,6 0,895
SP130 125,22 139,7 3,1 2,82 4,06 0,6 0,895
SP130 125,22 139,7 3,1 2,82 4,06 0,6 0,895
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,82
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,82
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,82
SP140 135,3 149,7 3,1 2,82 4,9 0,6 1,18
SP140 135,3 149,7 3,1 2,82 4,9 0,6 1,18
SP140 135,33 149,7 3,1 2,82 4,9 0,6 1,18
SP160 155,22 169,7 3,1 2,82 4,9 0,6 2,2
SP160 155,22 169,7 3,1 2,82 4,9 0,6 2,2
SP160 155,22 169,7 3,1 2,82 4,9 0,6 2,2
SP170 163,65 182,9 3,5 3,1 5,69 0,6 2,67
SP170 163,65 182,9 3,5 3,1 5,69 0,6 2,67
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,26
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,26
SP150 145,24 159,7 3,1 2,82 4,9 0,6 1,26
SP180 173,66 192,9 3,5 3,1 5,69 0,6 3,22
SP180 173,66 192,9 3,5 3,1 5,69 0,6 3,22
SP160 155,22 169,7 3,1 2,82 4,9 0,6 1,58
SP160 155,22 169,7 3,1 2,82 4,9 0,6 1,58
SP160 155,22 169,7 3,1 2,82 4,9 0,6 1,58
SP170 163,65 182,9 3,5 3,1 5,69 0,6 1,97
SP170 163,65 182,9 3,5 3,1 5,69 0,6 1,97
SP170 163,65 182,9 3,5 3,1 5,69 0,6 1,97
SP180 173,66 192,9 3,5 3,1 5,69 0,6 2,11
SP180 173,66 192,9 3,5 3,1 5,69 0,6 2,11
SP180 173,66 192,9 3,5 3,1 5,69 0,6 2,11
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 81
Rodamientos rígidos de bolas, acero inoxidable
Deep groove ball bearings, stainless steel
RODAMIENTOS RIGIDOS DE BOLAS, ACERO SINGLE ROW DEEP GROOVE BALL BEARINGS,
INOXIDABLE STAINLESS STEEL
Los rodamientos rígidos de bolas de acero inoxidable The WWB stainless steel deep groove ball bearings,
WWB, soportan las mismas cargas que los rodamientos feature similar load ratings as the normal steel bearings.
de acero normal. Estos rodamientos son resistentes a la This bearings are resistant to humidity, water, steam and
humedad, agua, vapor y soluciones alcalinas. many alkaline solutions.
WWB dispone de rodamientos de acero inoxidable WWB stainless steel bearings are produced open designs,
abiertos, con placas de protección (Z, 2Z) y placa de with shields (Z, 2Z) and seals (RS, 2RS).
obturación (RS, 2RS).
JAULA CAGE
Los rodamientos rígidos de bolas de acero inoxidable WWB stainless steel deep groove ball bearings are fitted
WWB, llevan jaulas de acero inoxidable. stainless steel cages.
PRECISIÓN
TOLERANCE
Los rodamientos rígidos de bolas de acero inoxidable
WWB stainless steel deep groove ball bearings are
WWB, se fabrican de forma estándar, con tolerancias
produced to normal tolerance class (PN, P0).
(PN, P0).
JUEGO INTERNO
INTERNAL CLEARANCE
Los rodamientos rígidos de bolas de acero inoxidable
WWB single row deep groove ball bearings are produced
WWB, se fabrican de forma estándar con juego interno
with normal internal clearance (CN) as standard. This
radial normal (CN), también se pueden fabrican con otros
bearings may be produced with other internal clearance
juegos radiales, (C2, C3).
groups (C2, C3·).
Los diferentes valores del juego interno para los Values of the different internal clearance groups of the
rodamientos rígidos de bolas, están diseñados conforme deep groove ball bearing are standardized and conform
to the valid international standards DIN 620 part 4 and
a la norma DIN 620 parte 4 ISO 5753-1981.
ISO 5753-1981
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
82 - WWB
Rodamientos rígidos de bolas, acero inoxidable
Deep groove ball bearings, stainless steel
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 83
Rodamientos rígidos de bolas, acero inoxidable
Deep groove ball bearings, stainless steel
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 85
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, acero inoxidable
Deep groove ball bearings, stainless steel
86 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de bolas, acero inoxidable
Deep groove ball bearings, stainless steel
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 87
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de dos hileras de bolas
Double row deep groove ball bearings
mayores cargas que los de una hilera. Pueden soportar ratings than single row bearings. They are able to support
cargas axiales por igual en ambas direcciones. thrust loads equally well in both directions.
Estas dos hileras dan al rodamiento mayor rigidez , pero This two row bearing given a very rigid arrangement, but
les hace muy sensible frente a las desalineaciones. they are very sensitive to misalignments.
rodamientos también pueden disponerse con jaulas de polyamide cages (suffix TN) as standard. These bearing
chapa de acero embutida. sizes are also available with pressed steel cages.
PRECISIÓN TOLERANCE
Los rodamientos de dos hileras rígidos bolas WWB, se WWB double row deep groove ball bearings are produced
fabrican de forma estándar, con tolerancias (PN, P0). to normal tolerance class (PN, P0).
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
88 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de dos hileras de bolas
Double row deep groove ball bearings
Para los rodamientos rígidos de dos hileras de bolas la For double row deep groove ball bearings the equivalent
carga dinámica equivalente que puede ser aplicada es: dynamic load the following formula should be applied:
Fa e
≤ P = Fr
Fr
Fa e P = X *F r + Y *F a
>
Fr
Fr: carga radial (kN) Fr: radial load (kN)
Fa: carga axial (kN) Fa: axial load (kN)
Los factores X, Y, e se muestran a continuación. Los X, Y factors can be found next. The magnitude of calculation
valores de los factores “x” e “y” estan determinados por factors “x” and “y” are mainly determined by the ratio of
el coeficiente entre la fuerza axial y la capacidad de carga acting thrust force to static load rating “Cor”, of the affected
estática “Cor”, del rodamiento utilizado. bearing.
Para los rodamientos rígidos de dos hileras de bolas la For double row deep groove ball bearings the equivalent
carga estática equivalente es dynamic load are:
P 0 = 0,6 *F r + 0,5 *F a
Cor CN (normal) C3 C4
e X Y e X Y e X Y
0,03 0,23 0,56 1,95 0,32 0,46 1,72 0,41 0,44 1,41
0,035 0,23 0,56 1,9 0,32 0,46 1,69 0,41 0,44 1,39
0,04 0,24 0,56 1,8 0,33 0,46 1,62 0,42 0,44 1,36
0,045 0,24 0,56 1,77 0,33 0,46 1,6 0,42 0,44 1,35
0,05 0,25 0,56 1,74 0,34 0,46 1,57 0,43 0,44 1,33
0,055 0,25 0,56 1,71 0,34 0,46 1,55 0,43 0,44 1,32
0,06 0,26 0,56 1,69 0,35 0,46 1,53 0,43 0,44 1,31
0,065 0,26 0,56 1,66 0,35 0,46 1,51 0,43 0,44 1,3
0,07 0,27 0,56 1,6 0,36 0,46 1,46 0,44 0,44 1,27
0,08 0,28 0,56 1,57 0,37 0,46 1,44 0,45 0,44 1,25
0,09 0,28 0,56 1,54 0,38 0,46 1,41 0,45 0,44 1,24
0,1 0,29 0,56 1,51 0,38 0,46 1,39 0,46 0,44 1,22
0,11 0,29 0,56 1,48 0,39 0,46 1,36 0,46 0,44 1,2
0,12 0,3 0,56 1,45 0,4 0,46 1,34 0,47 0,44 1,19
0,13 0,31 0,56 1,4 0,41 0,46 1,3 0,48 0,44 1,16
0,14 0,31 0,56 1,38 0,41 0,46 1,29 0,48 0,44 1,15
0,15 0,32 0,56 1,37 0,42 0,46 1,27 0,49 0,44 1,14
0,16 0,32 0,56 1,35 0,42 0,46 1,26 0,49 0,44 1,12
0,17 0,33 0,56 1,34 0,43 0,46 1,25 0,5 0,44 1,12
0,18 0,33 0,56 1,32 0,43 0,46 1,24 0,5 0,44 1,12
0,19 0,34 0,56 1,3 0,43 0,46 1,22 0,5 0,44 1,11
0,2 0,34 0,56 1,29 0,44 0,46 1,21 0,51 0,44 1,1
0,25 0,37 0,56 1,2 0,46 0,46 1,14 0,53 0,44 1,05
0,3 0,38 0,56 1,16 0,48 0,46 1,11 0,54 0,44 1,04
0,35 0,4 0,56 1,12 0,49 0,46 1,09 0,54 0,44 1,03
0,4 0,41 0,56 1,08 0,51 0,46 1,06 0,55 0,44 1,02
0,45 0,42 0,56 1,04 0,52 0,46 1,03 0,55 0,44 1,01
0,5 0,44 0,56 1 0,54 0,46 1 0,56 0,44 1
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 89
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos rígidos de dos hileras de bolas
Double row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
90 - WWB
Rodamientos rígidos de dos hileras de bolas
Double row deep groove ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 91
Rodamientos rígidos de bolas, tipo magneto
Magneto type ball bearings
JAULA CAGE
Los rodamientos de bolas tipo magneto WWB se ajustan WWB magneto type ball bearings are fitted with pressed
con jaulas estampadas de bronce como estándar brass cages as standard.
DESALINEACION MISALIGNMENT
Los rodamientos magneto son incapaces de soportar Magneto bearings are unable to accommodate large
grandes desalineaciones. Por lo tanto las desalineaciones misalignments. Therefore a misalignment of 2 angular
no deben ser superiores a 2 minutos angulares. minutes from their center position must not be exceeded.
PRECISIÓN TOLERANCE
Los rodamientos de bolas tipo magneto WWB, se fabrican WWB magneto ball bearings are produced to normal
de forma estándar, con tolerancias (PN, P0). Algunos tolerance class (PN, P0). Several bearings are produced
rodamientos se pueden suministrar también con una to higher precision tolerance classes P6.
mayor precisión correspondiente a la clase P6.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
92 - WWB
Rodamientos rígidos de bolas, tipo magneto
Magneto type ball bearings
Los rodamientos de dos hileras rígidos de bolas WWB, WWB double row deep groove ball bearings are produced
se fabrican de forma estándar con juego interno radial with normal internal clearance (CN) as standard. This
normal (CN), también se pueden fabrican con otros bearings may be produced with other internal clearance
juegos radiales groups
Para los rodamientos de bolas tipo magneto la carga For magneto type ball bearings the equivalent dynamic
dinámica equivalente que debería ser aplicada es: load should be applied:
F a 0,2
≤ P = Fr
Fr
Fa P = 0,5 *F r + 2,5 *F a
> 0,2
Fr
Para los rodamientos rígidos de bolas tipo magneto la Magneto type ball bearings the equivalent dynamic load
carga estática equivalente es: are:
P 0 = 0,5 *F r + 0,3 *F a
Pero si P0 < Fr, se aplica la siguiente fórmula: P0 = Fr But is P0 < Fr, the following formula is to be applied:
P0 = Fr
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 93
Rodamientos rígidos de bolas, tipo magneto
Magneto type ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
94 - WWB
Rodamientos rígidos de bolas, tipo magneto
Magneto type ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 95
Rodamientos de una hilera de bolas de contacto angular
Single row angular contact ball bearings
RODAMIENTOS DE UNA HILERA DE BOLAS DE SINGLE ROW ANGULAR CONTACT BALL BEARINGS
CONTACTO ANGULAR
Los rodamientos de una hilera de bolas de contacto Single row angular contact ball bearings are rigid, non-
angular, son rígidos, no desmontables, y pueden funcionar separable, and they are suitable for high speed applications.
a velocidades relativamente altas. Estos rodamientos They can accommodate both radial and thrust forces
pueden soportar tanto cargas radiales como axiales, including combined loads and tilting moments.
incluso una combinación de ambas y momentos flectores.
Dado que los rodamientos de bolas de contacto angular As single row angular contact ball bearings they only
solo pueden soportar cargas axiales en una sola dirección, accept thrust loads in one direction, they must be used
es recomendable usar rodamientos en parejas, donde in pairs, where a bearing has to be adjusted against
un rodamiento debe ser ajustado contra el otro para fijar another to guide the shaft in the opposite direction.
al eje en la dirección contraria.
Los rodamientos de una hilera de bolas con contacto Angular contact ball bearings transfer the loads above
angular, transmiten sus cargas sobre un “ángulo de “contact angle ”, when the higher the angle the better the
contacto ”, cuanto mayor sea el ángulo de contacto mayor thrust load capacity.
será la carga axial que puede soportar dicho rodamiento.
JAULA CAGE
Los rodamientos de una hilera de bolas de contacto WWB single row angular contact ball bearings are fitted
angular WWB, se fabrican de forma estándar con jaulas with pressed steel cages as standard.
de chapa de acero embutida
DESALINEACIONES MISALIGNMENT
Los rodamientos de contacto angular tienen una capacidad Single row angular contact ball bearings have a very
muy limitada de soportar desalineaciones, por otro lado limited ability to accommodate misalignments. Therefore
determinadas desalineaciones pueden provocar en este any operating misalignment applied to this bearing type
tipo de rodamiento, fuerzas adicionales que aumentan el creates additional forces subsequently reducing their
nivel de ruido y reducen la vida del rodamiento service life and generates higher running noise levels.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
96 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de bolas de contacto angular
Single row angular contact ball bearings
Los rodamientos de una hilera de bolas de contacto WWB single row angular contact ball bearings are
angular WWB, se fabrican con diferentes ángulos de produced with several different contact angles. These
contacto . Estos ángulos de contacto se identifican con contact angles are identified by the following suffixes.
los siguientes sufijos.
Sufijo angulo de contacto α
Suffix Contact angle
A 30º
B 40º
C 15º
D 25º
PRECISIÓN TOLERANCE
Los rodamientos de una hilera de bolas con contacto WWB single row angular contact ball bearings are
angular WWB, se fabrican de forma estándar, con produced to normal tolerance class (P0 o PN) as
tolerancias normales (P0 o PN). Algunos rodamientos standard. Several bearings are produced to higher
se pueden suministrar también con una mayor precisión precision tolerance classes (P6, P5).
correspondiente a las clases (P6, P5, ).
Los ajustes para el juego CN son: Normal fits CN for this bearing are;
Tolerancia eje j5 Shaft fits j5
Tolerancia alojamiento J6 Housing fits J6
Para los rodamientos de una hilera de bolas con contacto For single row angular contact ball bearings α=40º ,
angular α=40º, designación (B) o montados en tandem design (B) and tandem arrangement (BG) the equivalent
(BG) la carga dinámica equivalente que se debe aplicar dynamic load that should be used is:
es:
F a 1,14
≤ P = Fr
Fr
Fa P = 0,35 * F r + 0,57 * F a
> 1,14
Fr
Fr: carga radial (kN) Fr: radial load (kN)
Fa: carga axial (kN) Fa: axial load (kN)
Para los rodamientos de una hilera de bolas de contacto For single row angular contact ball bearings α=40º(B)
angular a=40º (B) y tipo tandem (BG), la carga estática and tandem arrangement (BG) the equivalent static load
equivalente que se debe aplicar es; that should be used is;
P 0 = 0,5 *F r + 0,26 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 97
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de bolas de contacto angular
Single row angular contact ball bearings
d D B r1, r2 r3, r4 a
min min
10 30 9 0,6 0,3 13 7200B
12 32 10 0,6 0,3 14 7201B
37 12 1 0,6 16 7301B
15 35 11 0,6 0,3 16 7202B
42 13 1 0,6 19 7302B
17 40 12 0,6 0,6 18 7203B
47 14 1 0,6 20 7303B
20 47 14 1 0,6 21 7204B
52 15 1,1 0,6 27 7304B
25 52 15 1 0,6 24 7205B
62 17 1,1 0,6 27 7305B
30 62 16 1 0,6 27 7206B
72 19 1,1 0,6 31 7306B
35 72 17 1,1 0,6 31 7207B
80 21 1,5 1 35 7307B
40 80 18 1,1 0,6 34 7208B
90 23 1,5 1 39 7308B
45 85 19 1,1 0,6 37 7209B
100 25 1,5 1 43 7309B
50 90 20 1,1 0,6 39 7210B
110 27 2 1 47 7310B
55 100 21 1,5 1 43 7211B
120 29 2 1 51 7311B
60 110 22 1,5 1 47 7212B
130 31 2,1 1,1 55 7312B
65 120 23 1,5 1 51 7213B
140 33 2,1 1,1 60 7313B
70 125 24 1,5 1 53 7214B
150 35 2,1 1,1 64 7314B
75 130 25 1,5 1 56 7215B
160 37 2,1 1,1 68 7315B
80 140 26 2 1 59 7216B
170 39 2,1 1,1 76 7316B
85 150 28 2 1 63 7217B
180 41 3 1,1 76 7317B
90 160 30 2 1 67 7218B
190 43 3 1,1 80 7318B
95 170 32 2,1 1,1 72 7219B
200 45 3 1,1 84 7319B
100 180 34 2,1 1,1 76 7220B
215 47 3 1,1 90 7320B
105 190 36 2,1 1,1 80 7221B
225 49 3 1,1 94 7321B
110 200 38 2,1 1,1 84 7222B
240 50 3 1,1 98 7322B
120 215 40 2,1 1,1 90 7223B
260 55 3 1,1 107 7323B
130 230 40 3 1,1 96 7226B
280 58 4 1,5 115 7326B
140 250 42 3 1,1 103 7228B
300 62 4 1,5 123 7328B
150 270 45 3 1,1 111 7230B
320 62 4 1,5 131 7330B
160 290 48 3 1,1 118 7232B
340 68 4 1,5 139 7332B
170 310 52 4 1,5 127 7234B
360 72 4 1,5 147 7334B
180 320 52 4 1,5 131 7236B
380 75 4 2 156 7336B
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
98 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de bolas de contacto angular
Single row angular contact ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 99
Rodamientos de una hilera de bolas de contacto angular, montado por parejas
Single row angular contact ball bearings, for paired mounting
RODAMIENTOS DE UNA HILERA DE BOLAS DE INGLES ROW ANGULAR CONTACT BALL BEARINGS,
CONTACTO ANGULAR, MONTADO POR PAREJAS FOR PAIRED MOUNTING
Cuando los rodamientos de una hilera de bolas de contacto When the single-row angular contact ball bearing is carrying
angular soportan cargas radiales, se produce una fuerza the radial load, there will be a component of force in the
que actúa en la dirección axial que debe ser contrarrestada. axial direction that it must be offset. Therefore it is
Por ello normalmente estos rodamientos se disponen de suggested two of these bearings be applied in back-to-
dos en dos, espalda contra espalda, frente a frente o back or face-to-face arrangement.
tandem The angular contact ball bearings for paired mounting can
Los rodamientos con contacto angular apareados pueden be divided into three group:
dividirse en tres grupos:
1.- Disposición tándem 1.- Tandem arrangement
2.- Disposición espalda contra espalda- 0 2.- Back-to-back arrangement-0
3.- Disposición frente a frente- X 3.- Face-to-face arrangement-X
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
100 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de bolas de contacto angular, montado por parejas
Single row angular contact ball bearings, for paired mounting
DESALINEACIONES MISALIGNMENTS
En los rodamientos por parejas de disposición cara a In the bearings for paired of face-to-face arrangement,
cara la desalineación no puede exceder de 2 minutos up to 2 angular minutes misalignment for that doesn’t
angulares, para que no afecte negativamente al normally affect the bearings negatively.
rodamiento.
Cuando las disposiciones son espada contra espalda y When the arrangements are back-to-back and tandem,
tandem, el eje del rodamiento no debe sufrir the spindle bearings must not run misaligned.
desalineaciones.
Para los rodamientos de una hilera de bolas montados For single row angular contact ball bearings back to
espalda a espalda y frente a frente la carga dinámica back and face to face arrangement the equivalent
equivalente que debe ser usada es; dynamic load that should be used is;
F a 1,14
≤ P = F r + 0,55 *F a
Fr
Fa P = 0,57 * F r + 0,93 * F a
> 1,14
Fr
Fa y Fr indican las fuerzas que actúan en la pareja de Fa y Fr indicate the forces acting on the bearing pairs
rodamientos
Para los rodamientos de una hilera de bolas de contacto For single row angular contact ball bearings back to
angular montados espalda contra espalda y frente a back and face to face arrangement the equivalent static
frente la carga estática equivalente que debe ser utilizada load that should be used is;
es;
P 0 = F r + 0,52 *F a
Fa y Fr indican las fuerzas que actúan en la pareja de Fa y Fr indicate the forces acting on the bearing pairs)
rodamientos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 101
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de bolas de contacto angular, montado por parejas
Single row angular contact ball bearings, for paired mounting
d D 2B r1, r2 r3, r4 a
min min
12 32 20 0,6 0,3 14 7201BG
15 35 22 0,6 0,3 16 7202BG
42 26 1 0,6 18 7302BG
17 40 24 0,6 0,6 18 7203BG
47 28 1 0,6 20 7303BG
20 47 28 1 0,6 21 7204BG
52 30 1,1 0,6 23 7304BG
25 52 30 1 0,6 24 7205BG
62 34 1,1 0,6 27 7305BG
30 62 32 1 0,6 27 7206BG
72 38 1,1 0,6 31 7306BG
35 72 34 1,1 0,6 31 7207BG
80 42 1,5 1 35 7307BG
40 80 36 1,1 0,6 34 7208BG
90 46 1,5 1 39 7308BG
45 85 38 1,1 0,6 37 7209BG
100 50 1,5 1 43 7309BG
50 90 40 1,1 0,6 39 7210BG
110 54 2 1 47 7310BG
55 100 42 1,5 1 43 7211BG
120 58 2 1 51 7311BG
60 110 44 1,5 1 47 7212BG
130 62 2,1 1,1 55 7312BG
65 120 46 1,5 1 51 7213BG
140 66 2,1 1,1 60 7313BG
70 125 48 1,5 1 53 7214BG
150 70 2,1 1,1 64 7314BG
75 130 50 1,5 1 56 7215BG
160 74 2,1 1,1 68 7315BG
80 140 52 2 1 59 7216BG
170 78 2,1 1,1 72 7316BG
85 150 56 2 1 63 7217BG
180 82 3 1,1 76 7317BG
90 160 60 2 1 67 7218BG
190 86 3 1,1 80 7318BG
95 170 64 2,1 1,1 72 7219BG
200 90 3 1,1 84 7319BG
100 180 68 2,1 1,1 76 7220BG
215 94 3 1,1 90 7320BG
105 190 72 2,1 1,1 80 7221BG
225 98 3 1,1 94 7321BG
110 200 76 2,1 1,1 84 7222BG
240 100 3 1,1 98 7322BG
120 215 80 2,1 1,1 90 7223BG
260 110 3 1,1 107 7323BG
130 230 80 3 1,1 96 7226BG
280 116 4 1,5 115 7326BG
140 250 84 3 1,1 103 7228BG
300 124 4 1,5 123 7328BG
150 270 90 3 1,1 111 7230BG
320 130 4 1,5 131 7330BG
160 290 96 3 1,1 118 7232BG
340 136 4 1,5 139 7332BG
170 310 104 4 1,5 127 7234BG
360 144 4 1,5 147 7334BG
180 320 104 4 1,5 131 7236BG
380 150 4 2 156 7336BG
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
102 - WWB
Rodamientos de una hilera de bolas de contacto angular, montado por parejas
Single row angular contact ball bearings, for paired mounting
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 103
Rodamientos de bolas de 4 puntos de contacto angular
Four point contact ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
104 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas de 4 puntos de contacto angular
Four point contact ball bearings
JAULA CAGE
Los rodamientos de cuatro puntos bolas con contacto WWB four point contact ball bearings are fitted with
WWB, se fabrican de forma estándar con jaulas machined solid brass cages as standard. Other bearings
mecanizada de latón. Otros rodamientos también pueden can produce with machined steel solid cage, machined
suministrarse con jaula mecanizada de acero, jaula light metal alloy solid cage and moulded polyamide
mecanizada de aleación ligera y jaula de poliamida. cage.
DESALINEACIONES MISALIGNMENT
Los rodamientos de bolas de cuatro puntos de contacto Four point contact ball bearing are less suitable to
son poco apropiados para trabajar con desalineaciones. operate with misalignments. When are combined a four
Cuando se montan un rodamiento de cuatro puntos de point ball bearing as thrust bearing with other radial
contacto como rodamiento axial con otro rodamiento bearing must not have neither misalignment
radial no puede haber ninguna desalineación.
PRECISIÓN TOLERANCE
Los rodamientos de bolas de cuatro puntos de contacto WWB four point contact ball bearings are produced to
WWB, se fabrican de forma estándar, con tolerancias normal tolerance class (P0 o PN) as standard. Several
normales (P0 o PN). Algunos rodamientos se pueden
bearings are produced to higher precision tolerance
suministrar también con una mayor precisión classes (P6, P5).
correspondiente a las clases (P6, P5).
F a 0,95
≤ P = F r + 0,66 *F a
Fr
Fa P = 0,6 *F r + 1,07 *F a
> 0,95
Fr
CARGA ESTÁTICA EQUIVALENTE EQUIVALENT STATIC LOAD
Para los rodamientos de cuatro puntos de contacto la For four point contact ball bearing the equivalent static
carga estática equivalente que debe ser aplicada es load that should be used is;
P 0 = F r + 0,58 *F a
Fr: carga radial (kN) Fa: carga axial (kN) Fr: radial load (kN) Fa: axial load (kN)
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 105
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas de 4 puntos de contacto angular
Four point contact ball bearings
Dimensiones principales
Principal dimensions
d D B r1, r2 a an bn rn
min
20 52 15 1,1 26 - - -
25 52 15 1 27 - - -
62 17 1,1 31 - - -
30 62 16 1 32 - - -
72 19 1,1 36 - - -
35 72 17 1,1 38 - - -
80 21 1,5 41 - - -
40 80 18 1,1 42 - - -
90 23 1,5 46 - - -
45 85 19 1,1 45 - - -
100 25 1,5 51 - - -
50 90 20 1,1 49 - - -
110 27 2 56 - - -
55 100 21 1,5 54 - - -
120 29 2 61 - - -
60 110 22 1,5 60 - - -
130 31 2,1 67 - - -
65 120 23 1,5 65 - - -
140 33 2,1 72 - - -
70 125 24 1,5 68 - - -
150 35 2,1 77 - - -
75 130 25 1,5 72
160 37 2,1 82 10,1 8,5 2
80 140 26 2 77
170 39 2,1 88 10,1 8,5 2
85 150 28 2 82
180 41 3 93 11,7 10,5 2
90 160 30 2 88 8,1 6,5 1
190 43 3 98 11,7 10,5 2
95 170 32 2,1 93 8,1 6,5 1
200 45 3 103 11,7 10,5 2
100 180 34 2,1 98 10,1 8,5 2
215 47 3 110 11,7 10,5 2
105 190 36 2,1 103 10,1 8,5 2
110 200 38 2,1 109 10,1 8,5 2
240 50 3 123 11,7 10,5 2
120 215 40 2,1 117 11,7 10,5 2
260 55 3 133 11,7 10,5 2
130 230 40 3 127 11,7 10,5 2
280 58 4 144 12,7 10,5 2
140 250 42 3 137 11,7 10,5 2
300 62 4 154 12,7 10,5 2
150 270 45 3 147 11,7 10,5 2
320 62 4 165 12,7 10,5 2
160 290 48 3 158 12,7 10,5 2
340 68 4 175 12,7 10,5 2
170 310 52 4 168 12,7 10,5 2
360 72 4 186 12,7 10,5 2
180 320 52 4 175 12,7 10,5 2
380 75 4 196 12,7 10,5 2
190 340 55 4 186 12,7 10,5 2
200 400 65 4 217 12,7 10,5 2
220 400 65 4 217 12,7 10,5 2
240 80 72 4 238 15 12,5 2,5
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
106 - WWB
Rodamientos de bolas de 4 puntos de contacto angular
Four point contact ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 107
Rodamientos de dos hileras de bolas de contacto angular
Double row angular contact ball bearings
RODAMIENTOS DE DOS HILERAS DE BOLAS CON DOUBLE ROW ANGULAR CONTACT BALL BEARINGS
CONTACTO ANGULAR
Los rodamientos de dos hileras de bolas con contacto Double row angular contact ball bearings are similar in
angular se parecen en diseño a dos rodamientos de una design to two single row angular contact ball bearing
hilera de bolas con contacto angular dispuestos espalda arranged back to back, but their width are less than two
a espalda, pero su ancho es menor que la de dos single row bearings together. They can support high radial
rodamientos de una hilera juntos. Pueden soportar and axial load in both directions. Thanks to contact angle
elevadas cargas radiales y axiales en ambos sentidos. α, could get arrangement of bearings comparatively rigid
Gracias al ángulo de contacto α, se pueden conseguir that could support bending moment.
disposiciones de rodamientos relativamente rígidas que
pueden soportar también momentos flectores.
JAULA CAGE
Los rodamientos de dos hileras de bolas con contacto WWB double row angular contact ball bearings are
angular WWB están fabricados y ajustados con jaula produced and fitted with solid brass, polyamide, and
mecanizada de latón, jaula de poliamida y jaula embutida pressed steel cage as standard.
de chapa de acero como estándar.
DESALINEACIONES MISALIGNMENTS
Los rodamientos de dos hileras de bolas con contacto WWB double row angular contact ball bearings must not
angular WWB no deben exponerse a ninguna de exposed to any misalignment
desalineación.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
108 - WWB
Rodamientos de dos hileras de bolas de contacto angular
Double row angular contact ball bearings
PRECISIÓN TOLERANCE
Los rodamientos de dos hileras de bolas con contacto WWB double row angular contact ball bearings are
angular WWB, se fabrican de forma estándar, con produced to normal tolerance class (P0 o PN) as
tolerancias normales (P0 o PN). Algunos rodamientos standard. Several bearings are produced to higher
se pueden suministrar también con una mayor precisión precision tolerance classes (P6, P5).
correspondiente a las clases (P6, P5).
Los rodamientos de dos hileras de bolas con contacto WWB double row angular contact ball bearings are
angular WWB, se fabrican de forma estándar con juego produced with normal internal clearance (CN) as
interno radial normal (CN). standard.
Los rodamientos de dos hileras de bolas con contacto WWB double row angular contact ball bearing are also
angular WWB, también tienen otros juegos radiales. produced to other internal clearances.
Para los rodamientos de dos hileras de contacto angular For double row angular contact ball bearings the
la carga dinámica equivalente que deben ser aplicado equivalent dynamic load that should be used are;
son;
α=350 F a 0,95
≤ P = F r + 0,66 *F a
Fr
Fa P = 0,6 *F r + 1,07 *F a
> 0,95
Fr
α=320 F a 0,86
≤ P = F r + 0,73 *F a
Fr
Fa P = 0,62 * F r + 1,17 * F a
> 0,86
Fr
α=350 P 0 = F r + 0,58 *F a
α=320 P 0 = F r + 0,63 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 109
Rodamientos de dos hileras de bolas de contacto angular
Double row angular contact ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 111
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
112 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
JAULAS CAGES
Los rodamientos de bolas autoalineables WWB, se fabrican WWB self aligning ball bearings are fitted with pressed
de forma estándar, con jaulas de chapa de acero embutida, steel cages as standard for small and medium size. For
para jaulas de tamaño pequeño y medio. Para tamaño larger size are fitted with solid brass cages.
grande se fabrican con jaulas de poliamida.
DESALINEACIONES MISALIGNMENTS
Los rodamientos de bolas autoalineables, tienen una Self aligning ball bearings have excellent ability to
excelente capacidad para compensar las desalineaciones. compensate for misalignments. The permissible values
Los valores permisibles para las diferentes series son: for different series are
Rodamiento Desalineación angular admisible
Bearing Permissible misalignment
serie grado (degree)
112-113 2,5º
abierta 12 y 22
open 2,5º
abierta 13 y 23
open 3º
PRECISIÓN TOLERANCE
Los rodamientos de bolas autoalineables WWB, se WWB self aligning ball bearings are produced to normal
fabrican de forma estándar, con tolerancias normales (P0 tolerance class (P0 o PN) as standard.
o PN).
Los rodamientos de bolas autoalineables WWB, se fabrican WWB self aligning ball bearings are produced with normal
de forma estándar con juego interno radial normal (CN). internal clearance (CN) as standard. This bearings may
Estos rodamientos pueden diseñarse con otros juegos. be produced with other internal clearance groups.
Fa e
≤ P = F r + Y *F a
Fr
Fa P = 0,65 *F r + Y *F a
>e
Fr
CARGA ESTÁTICA EQUIVALENTE EQUIVALENT STATIC LOAD
Para los rodamientos de bolas autoalineables la carga For self aligning ball bearings the equivalent dynamic load
estática equivalente que se puede aplicar es: that should be applied is;
P 0 = F r + Yo *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 113
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
114 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 115
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
116 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 117
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
118 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 119
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
120 - WWB
Rodamientos de bolas autoalineables
Self-aligning ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 121
Rodamientos de bolas autoalineables, con manguito de adaptación
Self-aligning ball bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
122 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables, con manguito de adaptación
Self-aligning ball bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 123
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de bolas autoalineables, con manguito de adaptación
Self-aligning ball bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
124 - WWB
Rodamientos de bolas autoalineables, con manguito de adaptación
Self-aligning ball bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 125
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
Los rodamientos de rodillos cilíndricos son rodamientos Cylindrical roller bearings are dismountable bearings, and
desmontables, con lo que se facilita el montaje y el therefore mantling and dismantling is easier especially
desmontaje, especialmente cuando por condiciones de when, due to loading conditions, adjustment of tightening
carga se precisa ajuste de apriete en ambos aros. in both rings is required.
Los rodamientos de una hilera de rodillos cilíndricos WWB WWB single row cylindrical roller bearings have large
tienen una gran capacidad de carga radial y también capacity for radial loads and can also operate at high
pueden funcionar a grandes velocidades. speeds.
Dependiendo de su diseño, los rodamientos de una hilera Depending on their particular design the single row bearings
de rodillos cilíndricos, son ideales para usarlos como are ideal as non-locating radially loaded bearings. Several
rodamientos libres cargados radicalmente. Otros diseños design variations will also accept limited amounts of axial
aceptan cantidades límites de carga axial en una o dos loading in one or both directions.
direcciones.
Los rodamientos del tipo NU tienen dos pestañas The NU design features two integral flanges on the outer
integradas en el aro exterior y el aro interior carece de ring and a plain inner ring.
pestañas.
Los de tipo N tienen dos pestañas integradas en al aro The N design features two integral flanges on the inner
interior y el aro exterior no lleva pestañas. ring and a plain outer ring.
El diseño NJ tiene dos pestañas integradas en el aro The NJ design has two integral flanges on the outer ring
exterior y una en el aro interior. Esto permite que estos and one integral flange on the inner ring. This allows the
rodamientos soporten cargas axiales en una dirección bearings to withstand axial loads in one direction only.
solamente.
El diseño NUP tiene dos pestañas integradas en el aro The NUP designs have two integral flanges on their outer
exterior, una pestaña en el interior y otra suelta. Los ring, one integral flange on the inner ring and a loose rib.
rodamientos NUP permiten soportar cargas axiales en These NUP bearings are able to withstand axial loads in
cada dirección. either direction.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
126 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
Los rodamientos NJ combinados con un aro angular HJ, NJ bearings in conjunction with a HJ thrust collar, can be
se pueden usar para fijar el eje en ambos sentidos. used to fix the shaft in both directions.
Los rodamientos NU combinados con un aro angular HJ, NU bearings in conjunction with a HJ thrust collar, can be
se pueden usar para fijar al eje en un solo sentido. used to fix the shaft in only one direction.
JAULAS CAGES
Los rodamientos de una hilera de rodillos cilíndricos se Single row cylindrical roller bearings are supplied with
suministran con jaulas de chapa de acero embutido como pressed steel plated cages as standard. The larger bearings
estándar. Los rodamientos grandes son ajustados con are fitted with mechanized brass cages (suffix M) as
jaulas mecanizadas de latón (sufijo M) como estándar . standard.
Los rodamientos de una hilera de rodillos cilíndricos WWB WWB single row cylindrical roller bearings are delivered
son suministrados con jaulas de poliamida (sufijo E) como with polyamide cages (suffix E) as standard.
estándar.
MISALIGNMENTS
DESALINEACIONES For applications operating under normal conditions the
Para aplicaciones que trabajan en condiciones normales, misalignment must not exceed 2 angular minutes. When
las desalineaciones no deben exceder en 2 minutos bearings run misaligned they are subject to additional
angulares. Cuando los rodamientos sufren forces that lead to a reduced service life of the bearing
desalineaciones, están sujetos a fuerzas adicionales las and an increase in the temperatures and noise levels.
cuales reducen la vida del rodamiento y aumentan la
temperatura y el nivel de ruido.
PRECISIÓN TOLERANCES
Los rodamientos de una hilera de rodillos se fabrican, de Single row cylindrical roller bearings are produced to
forma estándar, con tolerancias normales (PN, P0). normal tolerance class (PN, P0) as standard. These
También se pueden fabricar con valores de tolerancias bearings can also be produced at tolerance levels
correspondientes a mayores precisiones (P6, P5). corresponding to greater precision (P6, P5).
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 127
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
Cuando los rodamientos del tipo (N, NU), se usan como When the bearings of the type (N, NU) are to be used as
rodamientos libres, no pueden soportar cargas axiales, non-locating bearings, they are unable to withstand thrust
la carga dinámica equivalente es: loads, the equivalent dynamic load is:
P = Fr
En el caso de los rodamientos de una hilera de rodillos In the case of single row cylindrical roller bearings with
cilíndricos con pestañas en el aro interior o en el exterior, flanges on inner or outer ring, the equivalent dynamic
la carga dinámica que se aplica es: load applicable is:
Fa e
≤ P = Fr
Fr
Fa P = X *F r + Y *F a
>e
Fr
Para rodamientos de una hilera de rodillos cilíndricos, la For single row cylindrical bearings, the equivalent static
carga estática equivalente: load is
P 0 = Fr
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
128 - WWB
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 129
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 131
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 133
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 135
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 137
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
WWB - 139
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 141
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 143
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 145
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera de rodillos cilíndricos
Single row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 147
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras de rodillos cilíndricos
Double row cylindrical roller bearings
Los rodamientos de dos hileras de rodillos cilíndricos son Double row cylindrical roller bearings are dismountable
rodamientos radiales desmontable. radial bearings.
Estos rodamientos se usan frecuentemente como These bearings are frequently used as non-locating
rodamientos libres, en aplicaciones de ejes para máquina bearings, for application in shafts for machine tools.
herramienta. Por tanto, normalmente se usan con Therefore, these bearings are often used in high precision
tolerancias de mayor precisión en combinación con una tolerance class in combination with reduced internal
reducción de juego interno. clearance.
Estos rodamientos soportan altas cargas radiales y trabajan These bearings also support high radial loads and are
muy bien a altas velocidades, proporcionando una satisfactory for high-speed applications, providing a very
disposición muy rígida. rigid bearing arrangement.
Se usan normalmente los rodamientos de esta serie con This series of bearings is commonly used with tapered
agujero cónico sufijo K (1:12) bores (suffix K 1:12)
El diseño NN30, tiene la superficie del aro exterior plana In the NN30 design, the surface of the outer ring is smooth
y 3 pestañas integradas en el aro interior. and has 3 integral flanges on the inner ring.
La serie NNU49 presenta características de diseño interno NNU49 series feature opposite internal design
opuestas a las de la serie NN30 (3 pestañas integradas characteristics to NN30 series (outer ring with 3 integral
en el aro exterior y superficie plana en al aro interior). shoulders around the raceway and a plain inner ring).
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
148 - WWB
Rodamientos de dos hileras de rodillos cilíndricos
Double row cylindrical roller bearings
JAULAS CAGES
Los rodamientos de dos hileras de rodillos cilíndricos se Double row cylindrical roller bearings are produced with
fabrican con jaulas mecanizadas de latón. mechanized brass cages as standard.
DESALINEACIONES MISALIGNMENTS
Los rodamientos de dos hileras de rodillos cilíndricos no Double row cylindrical roller bearings are unable to misalign.
permiten ningún tipo de desalineación
TOLERANCES
PRECISIONES Double row cylindrical roller bearings are frequently used
Normalmente este tipo de rodamientos se usa como as spindle bearings. They are therefore manufactured
cojinete de husillo. Por lo que se fabrican con tolerancias with precision tolerance class (P4) as standard. These
de precisión (P4) como estándar. También se pueden bearings can also be produced to higher precision tolerance
fabricar con tolerancias de precisión de mayor grado. classes.
Los rodamientos de dos hileras de rodillos cilíndricos se Double row cylindrical roller bearings are produced to the
fabrican con juego interno normal (CN) como estándar. normal internal clearance (CN), as standard.
Otros juegos son fabricados según requerimientos.
Los rodamientos de dos hileras de rodillos cilíndricos (NN, Double row cylindrical roller bearings are used as non-
NNU) se usan como rodamientos libres, no pueden locating bearings, and are unable to withstand thrust loads.
soportar cargas axiales, la carga dinámica equivalente The equivalent dynamic load is:
es:
P = Fr
Para rodamientos de dos hilera de rodillos cilíndricos, la For double row cylindrical bearings, the equivalent static
carga estática equivalente: load is:
P 0 = Fr
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 149
Rodamientos de dos hileras de rodillos cilíndricos
Double row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
152 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras de rodillos cilíndricos
Double row cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 153
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos completamente llenos de rodillos cilíndricos
Full complement cylindrical roller bearings
Rodamientos de una hilera completamente llena de Single row full complement cylindrical roller bearings
rodillos cilíndricos The single row full complement cylindrical roller bearings
Los rodamientos de una hilera de rodillos cilíndricos llenos are suitable for withstanding very high radial loads. These
de rodillos son apropiados para absorber cargas radiales bearings also withstand axial load in one direction. To
muy elevadas. Los rodamientos también absorben cargas obtain an axial counterguide a second bearing set
axiales en un sentido. Para conseguir un contraguiado symmetrically to the first must be available.
axial se ha de disponer de un segundo rodamiento Series NCF, NJ23..VH and NC correspond to this type of
simétricamente dispuesto al primer rodamiento. bearing.
A este tipo de rodamientos pertenecen las series NCF,
NJ23..VH y NC..
Rodamientos de doble hilera completamente llenas Double row full complement cylindrical roller bearings
de rodillos cilíndricos
The double row full complement cylindrical roller bearings
Los rodamientos de doble hilera de rodillos cilíndricos
withstand both extreme radial and axial forces in both
llenos de rodillos absorben tanto extremas fuerzas radiales
directions as well as in cases of overturn. For this reason
como fuerzas axiales en ambos sentidos, así como
they are suitable as fixed bearings.
momentos de vuelco. Por esta razón son apropiados
como rodamientos fijos. Series NNCL, NNC, NNCF and NNF50..2LS.V correspond
A este tipo de rodamientos pertenecen las series NNCL, to this type of bearing.
NNC, NNCF y NNF50..2LS.V
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
154 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos completamente llenos de rodillos cilíndricos
Full complement cylindrical roller bearings
TOLERANCES
PRECISIÓN
For basic implementation the full complement cylindrical
En la ejecución básica los rodamientos de rodillos
roller bearings are produced to normal tolerance for radial
cilíndricos llenos de rodillos se fabrican con tolerancia
bearings.
normal de los rodamientos radiales.
INTERNAL CLEARANCE
JUEGO INTERNO
WWB Full complement cylindrical roller bearings are
Los rodamientos de rodillos cilíndricos completamente
manufactured to the normal internal clearance (CN) as
llenos de rodillos WWB se fabrican con juego interno
standard.
normal CN, como estándar.
P = Fr
En el caso de actuación de una fuerza axial adicional Fa: In case of additional axial force Fa:
Fa
≤ Fr P = Fr
Fr
Fa P = X *F r + Y *F a
>F r
Fr
P 0 = Fr
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 155
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
156 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 157
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
158 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 159
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
160 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 161
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
162 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de una hilera completamente llenos de rodillos cilíndricos
Single row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 163
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras completamente llenos de rodillos cilíndricos
Double row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
164 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras completamente llenos de rodillos cilíndricos
Double row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
170 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras completamente llenos de rodillos cilíndricos
Double row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 171
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de dos hileras completamente llenos de rodillos cilíndricos, con obturaciones
Sealed double row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
172 - WWB
Rodamientos de dos hileras completamente llenos de rodillos cilíndricos, con obturaciones
Sealed double row full complement cylindrical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 173
Rodamientos de rodillos cónicos
Algunos rodamientos de rodillos cónicos tienen el sufijo Some taper roller bearings have the suffix X, quasi their
X, es decir sus dimensiones principales son modificadas boundary dimensions are changed slandered plans ISO.
según norma ISO.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
174 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos
DESALINEACIÓN MISALIGNMENT
Sólo pueden compensarse errores de alineación inferiores Only misalignments not exceeding 1,5 angular minutes
a 1,5 minutos angulares. En cualquier caso, cualquier can be accommodated. In any case where a misalignment
desalineación producirá cargas adicionales considerables exists bearings are subjected to considerable additional
que acortarán la vida del rodamiento. forces that will shorten bearing life.
JAULAS CAGES
Los rodamientos de rodillos cónicos WWB se fabrican WWB taper roller bearings are fitted with pressed steel
con jaula de chapa embutida de acero aunque para cages as standard though can be produced with polyamide
aplicaciones especiales pueden fabricarse con jaula cages fitted for special applications.
moldeada de poliamida.
TOLERANCE
PRECISION WWB taper roller bearings are produced to normal
Los rodamientos de rodillos cónicos WWB, se fabrican tolerance class (P0 o PN) as standard. These bearings
de forma estándar, con tolerancias normales (P0 o PN). may also be produced with closer tolerance classes (P6X).
Algunos rodamientos se pueden suministrar también
con mayor ajuste (P6X).
INTERNAL CLEARANCE
JUEGO INTERNO The axial play of taper roller bearings is controlled during
El juego axial de los rodamientos de rodillos cónicos, mounting by adjusting one bearing against another. The
deben ser controlados durante el montaje de un changes in shaft length, (eg caused by thermal expansion),
rodamiento frente a otro. El cambio en la longitud del leads to changes in operating clearance. For this reason
eje (por ejemplo el causado por la expansión térmica), the distance between bearing positions should be kept a
produce un cambio en el juego de funcionamiento. Por minimum.
esa razón la distancia entre la posición de los rodamientos
debe ser mínima.
Fa
≤e P = Fr
Fr
Fa e P = 0,4 *F r + Y *F a
>
Fr
Fr: carga radial (kN) Fr: radial load (kN)
Fa: carga axial (kN) Fa: axial load (kN)
Los factores, Y, e se enseñan a continuación Y, e factors can be found next
P0 = 0,5 *F r + Y0 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 175
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
180 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
182 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 183
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos, montados en parejas
Taper roller bearings, for paired mounting
RODAMIENTOS DE RODILLOS CÓNICOS, MONTADOS TAPER ROLLER BEARINGS, FOR PAIRED MOUNTING
POR PAREJAS Single row tapered roller bearings mounted in pairs are
Los rodamientos de una hilera de rodillos cónicos used in those applications where the load capacity on
montados por parejas se utilizan en aquellas aplicaciones only one bearing is insufficient or when the application
donde la capacidad de carga ofrecida por un solo requires shaft guidance in both directions with a certain
rodamiento resulta insuficiente, o cuando la aplicación thrust clearance.
requiere la fijación del eje en ambos sentidos con un
determinado juego axial.
Los rodamientos de rodillos cónicos apareados pueden Paired tapered roller bearings can be divided into three
dividirse en tres grupos: groups:
1.- Disposición tándem (DT) 1. Tandem arrangement –(DT)
2.- Disposición espalda contra espalda- 0 (DB) 2. Back-to-back arrangement – 0 (DB)
3.- Disposición frente a frente- X (DF) 3. Face-to-face arrangement – X (DF)
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
184 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos, montados en parejas
JAULAS CAGES
MISALIGNMENTS
DESALINEACIONES Generally, single row tapered roller bearings mounted in
Por lo general, los rodamientos de una hilera de rodillos pairs should not be exposed to misalignments; they can
cónicos, montados por parejas no deberían exponerse a cause a high degree of noise.
desalineaciones , estas pueden causar altos niveles de
ruido.
PRECISIONES TOLERANCES
Los rodamientos de una hilera de rodillos cónicos, Paired single row tapered roller bearings are produced to
apareados se fabrican de forma estándar con tolerancias normal tolerance class (P0, PN) as standard.
normales (P0, PN). These bearings can be produced to higher tolerance levels
Estos rodamientos pueden fabricarse con tolerancias (P6X).
mayores (P6X).
JUEGO INTERNO
INTERNAL CLEARANCE
Los rodamientos de rodillos cónicos apareados en
Paired single row tapered roller bearings in face-to-face
disposición cara a cara (DF)
arrangement (DF)
Fa
≤e P = F r + Y1 *F a
Fr
Fa e P = 0,67 *F r + Y2 *F a
>
Fr
CARGA ESTÁTICA EQUIVALENTE EQUIVALENT STATIC LOAD
Para los rodamientos apareados en disposición frente a For single row ball bearings mounted face-to-face:
frente:
P0 = F r + Y0 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 185
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos cónicos, montados en parejas
Taper roller bearings, for paired mounting
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
186 - WWB
Rodamientos de rodillos cónicos, montados en parejas
Taper roller bearings, for paired mounting
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
WWB - 187
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
188 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
DESALINEACIÓN MISALIGNMENT
Los rodamientos de rodillos esféricos son óptimos para Spherical roller bearings are optimum to compensate
compensar desalineamientos. misalignments.
Las máximas desalineaciones permisibles son las The following values of misalignments are the maximum
siguientes. permissible.
Desalineación angular
Series de rodamientos
permisible
Bearing
Permisible angular ψ
series misalignment
213 1
222 1,5
223 2
230 1,5
231 1,5
232 2,5
239 1,5
240 2
241 2,5
PRECISIÓN TOLERANCE
Los rodamientos WWB de rodillos esféricos se fabrican, WWB spherical roller bearings are produced to normal
de forma estándar, con tolerancias normales. tolerance class as standard.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 189
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
Fa e
≤ P = F r + Y *F a
Fr
Fa e P = 0,67*F r + Y *F a
>
Fr
P 0 = F r + Y0 *F a
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
190 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 191
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
192 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 193
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
196 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 197
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
198 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 199
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
200 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 201
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
202 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 203
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
204 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 205
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
206 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 207
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
208 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos
Spherical roller bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 209
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de fijación
Spherical roller bearings, with adapter sleeve
210 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de fijación
Spherical roller bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 211
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de fijación
Spherical roller bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
214 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de fijación
Spherical roller bearings, with adapter sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 215
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
Spherical roller bearings, with withdrawal sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
216 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
Spherical roller bearings, with withdrawal sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
218 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
Spherical roller bearings, with withdrawal sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 219
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
Spherical roller bearings, with withdrawal sleeve
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
220 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
222 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de rodillos esféricos, con manguito de desmontaje
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 223
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas
Thrust ball bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
224 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas
Thrust ball bearings
Los rodamientos axiales de bolas de doble efecto guían Double direction thrust ball bearings are suitable to guide
al eje en ambas direcciones, llevan dos arandelas de the shaft in both directions, these bearings consist of two
alojamiento, dos hileras de bolas y jaulas axiales housing washers, two ball rows, and cage thrust assembly
ensambladas con una arandela de eje en común. Para with one common shaft washer. For applications where
aquellas aplicaciones donde se produzcan desalineaciones some misalignment may occur, double direction thrust
se pueden utilizar rodamientos axiales de bolas de doble bearings with sphered housing washers and seating
efecto con asientos esféricos en las arandelas de washers.
alojamiento y contraplacas con asientos también esféricos.
NORMAS, DIMENSIONES PRINCIPALES STANDARDS, PRINCIPAL DIMENSIONS
Normalización DIN 616 Standard plans DIN 616
Rodamientos axial Thrust ball bearings
de bolas, simple efecto DIN 711 single direction DIN 711
Rodamientos axial Thrust ball bearings
de bolas, doble efecto DIN 715 Double direction DIN 715
Contraplaca con asiento esférico DIN 711 Seating washers DIN 711
JAULAS CAGES
Los rodamientos axiales de bolas WWB, se fabrican de WWB thrust ball bearings are fitted with pressed steel
forma estándar con jaulas de chapa de acero embutida. cages as standard. For larger thrust ball bearings solid
Para el caso de rodamientos grandes se fabrican de brass cages or solid steel cages, are fitted as standard.
forma estándar con jaula mecanizada de latón o jaula
mecanizada de acero
DESALINEACIONES MISALIGNMENT
Los rodamientos axiales de bolas con arandela de All trust ball bearing types with flat housing washers do
alojamiento plano no permiten ninguna desalineación. not allow any misalignment. The thrust ball bearings with
Los rodamientos axiales de bolas con asiento esférico sphered housing washer could reduce the effects of
en la arandela de alojamiento, pueden reducir el efecto misalignment during mounting. The contacting surfaces
de las desalineaciones durante el montaje. Las superficies of both shaft and housing seats must be parallel.
en contacto entre el eje y el alojamiento deben ser
paralelas.
PRECISIÓN TOLERANCES
Los rodamientos axiales de bolas WWB, se fabrican de WWB thrust ball bearings are produced to normal tolerance
forma estándar con precisión normal (P0 o PN). Algunos class (P0 o PN) as standard. Several bearings are
rodamientos se pueden suministrar también con una produced to higher precision tolerance classes (P6).
mayor precisión correspondiente a las clases (P6).
CARGA DINAMICA EQUIVALENTE EQUIVALENT DYNAMIC LOAD
Para los rodamientos axiales de bolas sin carga radial la For thrust ball bearings without radial load the equivalent
carga dinámica equivalente es;
P = Fa
Po = Fa
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 225
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
226 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 227
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
228 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 229
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de doble efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
230 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de doble efecto
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 231
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto con arandela de alojamiento esférico
232 - WWB ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto con arandela de alojamiento esférico
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 233
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto con arandela de alojamiento esférico
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
234 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de simple efecto con arandela de alojamiento esférico
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 235
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de doble efecto con arandela de alojamiento esférico
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
236 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de bolas de doble efecto con arandela de alojamiento esférico
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 237
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos cilíndricos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
238 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos cilíndricos
PRECISIÓN TOLERANCES
Los rodamientos axiales de rodillos cilíndricos WWB, se WWB cylindrical roller thrust bearings are produced to
fabrican de forma estándar con tolerancias normales (P0 normal tolerance class (P0 o PN) as standard. Several
o PN). Algunos rodamientos se pueden suministrar bearings are produced to higher precision tolerance classes
también con una mayor precisión correspondiente a las (P6).
clases (P6).
EQUIVALENT DYNAMIC LOAD
CARGA DINAMICA EQUIVALENTE
Para los rodamientos axiales de rodillos cilíndricos sin For cylindrical roller thrust bearings without radial load
carga radial la carga dinámica equivalente es; the equivalent dynamic load are;
P = Fa
P o = Fa
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 239
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos cilíndricos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
240 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos cilíndricos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 241
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos esféricos
Los rodamientos axiales de rodillos esféricos son Spherical roller thrust bearings are separable single
rodamientos desmontables de simple efecto. Los direction. Spherical roller thrust bearings are self-aligning,
rodamientos axiales de rodillos esféricos son which are made insensitive to shaft bending and errors
autoalineables, lo cual los hace adecuados a las flexiones of misalignment between the shaft and housing. Spherical
del eje y a los errores de alineación entre el eje y el roller thrust bearings run on the sphered raceways of shaft
alojamiento. Los rodillos esféricos ruedan por la zona de and housing washers. Spherical roller thrust bearings
rodadura esférica del eje y del alojamiento. transmit forces via a contact angle towards the center
Los rodamientos axiales de rodillos esféricos transmiten axis. Thus, they are able to accommodate some radial
las fuerzas bajo un ángulo de contacto aplicado en el forces along with high axial loads.
centro, esto les permite soportan cargas radiales y altas
cargas axiales a la vez.
Desalineación admisible
Serie del rodamiento ψ
Permissible angular misalignment
Bearing series
P(Po) ≤ 0,05* C0a
294 (E) 3º
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
242 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos esféricos
TOLERANCIAS TOLERANCES
Los rodamientos axiales de rodillos esféricos WWB son WWB spherical roller thrust bearings are produced to
fabricados bajo la clase de tolerancia normal (PN, P0), normal tolerance class (PN, P0) as standard.
como estándar.
EQUIVALENT DYNAMIC LOAD
CARGA DINAMICA EQUIVALENTE
Para los rodamientos axiales de rodillos esféricos; cuando For spherical roller thrust bearings; when Fr ≤ 0,55*Fa
Fr ≤ 0,55*Fa
P = Fa + 1,2* Fr
Po = Fa + 2,7* Fr
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 243
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos esféricos
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
244 - WWB
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos axiales de rodillos esféricos
Dimensiones Masa Kg
Dimensions Weight Kg
D1 d1 h B B1 B2 B3 A M, E.M J, E.J
88 118 20 28 15 39,5 35,5 38 2,6 2,47
96,5 128 21 30 16 42,5 38 42 3,3 3,22
102 137 23 32 17 45,5 42 44 4 3,98
109 146 24 35 18 58 44,5 47 4,9 4,74
116 155 24 36 19 51 46,5 50 5,8 5,57
125 164 28 38 21 55 49 54 6,9 6,64
130 174 29 - 22 57 - 56 8,1 -
144,5 193 32 - 24 64 - 62 11,8 -
143 176 23 - 16 45,5 - 64 5,5 5,4
160 212 35 - 26 69 - 69 14,5 -
157,5 194 26 - 18 51 - 70 7,6 -
172 229 37 - 29 74 - 74 18,1 -
170 205 28 37 19 55 50,5 76 9,3 8,65
188 247 41 55,5 31 81 72 81 22,5 21,8
183 219 29 - 20 57 - 82 11 -
197,5 257 41 - 31 81 - 86 24,2 -
193 229 29 - 20 57 - 87 11,5 -
211,5 276 44 - 32 86 - 92 29,4 -
207 248 32 - 23 64 - 92 15,2 -
226 306 45 - 34 91 - 99 35,5 -
215 258 32 - 23 64 - 96 16 -
240 324 50 - 37 99 - 104 43,7 -
231 277 35 - 25 69 - 103 20,3 -
255 342 52 - 39 105 - 110 52 -
246 308 38 - 27 74 - 110 24,8 -
270 360 55 - 41 110 - 117 60 -
261 325 41 - 29 81 - 116 30,8 -
284 380 59 - 43 117 - 122 69 -
280 345 41 - 29 81 - 125 32,8 -
305 400 58 - 43 117 - 132 74 -
283 330 30 - 19 57 - 130 16,7 -
300 365 41 - 29 81 - 135 35,3 -
321 420 59 - 43 117 - 142 79 -
302 350 30 - 19 57 - 139 18,5 -
325 405 45 - 32 91 - 148 48,5 -
346 460 64 - 48 127 - 154 105 -
323 370 30 - 19 57 - 150 19,5 -
345 423 46 - 32 91 - 158 52,5 -
380 495 68 - 52 140 - 166 132 -
355 405 38 - 2 69 - 172 30,5 -
375 460 50 - 137 105 - 168 74 -
398 515 70 - 52 140 - 175 140 -
375 430 38 - 21 69 - 172 32,9 -
395 482 53 - 37 105 - 180 77 -
430 555 75 - 55 149 - 191 175 -
424 520 59 - 41 117 - 192 103 -
452 590 82 - 61 164 - 201 218 -
420 485 44 - 25 81 - 194 51,8 -
444 540 59 - 41 117 - 202 107 -
440 505 42 - 27 81 - 202 52,8 -
510 640 85 - 63 168 - 222 254 -
460 526 42 - 27 81 - 212 55,3 -
494 596 64 - 4 127 - 225 150 -
520 626 68 - 48 135 - 235 170 -
546 700 89 - 67 178 - 244 323 -
546 655 70 - 49 140 - 245 190 -
576 745 100 - 74 199 - 260 407 -
574 654 55 - 33 99 - 268 101 -
611 725 74 - 51 144 - 280 220 -
648 772 76 - 54 154 - 295 286 -
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso. WWB - 245
ROLLER., reserves the right to modify any feature without prior notice.
Soportes
Bearing units
LUBRICACIÓN LUBRICATION
Los rodamientos para soportes WWB no necesitan Bearings for WWB pillow blocks do not require
mantenimiento. El relleno de grasa procedente de la maintenance. The grease fill from manufacture is usually
fábrica es suficiente, por regla general, para la vida en sufficient for the service life of the bearing. They are
servicio del rodamiento. Disponen de un engrasador por supplied with a grease gun in case re-lubrication in
si fuera necesaria la relubricación. necessary.
DESALINEACIONES MISALIGNMENTS
Los rodamientos para soportes WWB permiten una Bearings for WWB pillow blocks accept a compensation
compensación de errores angulares estáticos de hasta for static angular dislocation of up to 5º with respect to
5º con relación a la posición central. Si se ha previsto the central position. If re-greasing is foreseen, the
reengrase, el ángulo de adaptación sólo puede ser de adaptation angle can only be of 2.5º as if it were greater
2,5º, ya que si es mayor se taponaría el orificio de it would cover the lubrication hole in the outer ring.
lubricación en el aro exterior.
PRECISIÓN TOLERANCES
Básicamente lo rodamientos para soportes WWB se Bearings for WWB pillow blocks are basically produced
fabrican en la clase de tolerancias PN (tolerancia normal) to the PN class tolerance (normal tolerance) for radial
de los rodamientos radiales. bearings.
Con esta tolerancia se obtiene siempre un ajuste holgado With this tolerance comfortable adjustment is always
si el eje está mecanizado según una tolerancia del campo ensured if the shaft is mechanized according to the field
h. Es suficiente usar ejes estirados, habituales en el tolerance h. It is sufficient to use stretched shafts, common
mercado con una tolerancia h9. on the market with an h9 tolerance.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
246 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes
Bearing units
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 247
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
SOPORTES UCP200
PILLOW BLOCKS UCP 200
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
248 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
UCP X05 25 44,4 159 119 51 25 17 18 85 38,1 15,9 M14 UC X05 P X05 1,5
UCP X06 30 47,6 175 127 57 25 17 20 94 42,9 17,5 M14 UC X06 P X06 2
UCP X07 35 54 203 144 57 30 17 22 105 49,2 19 M14 UC X07 P X07 2,7
UCP X08 40 58,7 222 156 67 32 20 26 113 49,2 19 M16 UC X08 P X08 3,5
UCP X09 45 58,7 222 156 67 33 20 26 116 51,6 19 M16 UC X09 P X09 3,6
UCP X10 50 63,5 241 171 73 36 20 27 126 55,6 22,2 M16 UC X10 P X10 4,4
UCP X11 55 69,8 260 184 79 36 25 30 139 65,1 25,4 M20 UC X11 P X11 6,3
UCP X12 60 76,2 286 203 83 41 25 32 152 65,1 25,4 M20 UC X12 P X12 7,4
UCP X13 65 76,2 286 203 83 41 25 32 154 74,6 30,2 M20 UC X13 P X13 7,7
UCP X14 70 88,9 330 229 89 51 27 35 171 77,8 33,3 M22 UC X14 P X14 10,6
UCP X15 75 88,9 330 229 89 51 27 35 175 82,6 33,3 M22 UC X15 P X15 11,1
UCP X16 80 101,6 381 283 102 59 27 42 195 85,7 34,1 M22 UC X16 P X16 16,2
UCP X17 85 101,6 381 283 102 60 27 45 200 96 39,7 M22 UC X17 P X17 16,5
UCP X18 90 101,6 381 283 111 60 27 45 204 104 42,9 M22 UC X18 P X18 18
UCP X20 100 127 432 337 121 64 33 52 245 117,5 49,2 M27 UC X20 P X20 31,8
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 249
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
250 - WWB
Soportes de fundición con rodamientos de acero al cromo
UCF X05 25 108 83 18 13 30 12 40,2 38,1 15,9 M10 UC X05 F X05 1,2
UCF X06 30 117 92 19 14 34 16 44,4 42,9 17,5 M14 UC X06 F X06 1,6
UCF X07 35 130 102 21 14 38 16 51,2 49,2 19 M14 UC X07 F X07 2,0
UCF X08 40 137 105 22 14 40 19 52,2 49,2 19 M16 UC X08 F X08 2,4
UCF X09 45 143 111 23 14 40 19 55,6 51,6 19 M16 UC X09 F X09 2,7
UCF X10 50 162 130 26 20 44 19 59,4 55,6 22,2 M16 UC X10 F X10 3,7
UCF X11 55 175 143 29 20 49 19 68,7 65,1 25,4 M16 UC X11 F X11 4,9
UCF X12 60 187 149 34 21 59 19 73,7 65,1 25,4 M16 UC X12 F X12 5,7
UCF X13 65 187 149 34 21 59 19 78,4 74,6 30,2 M16 UC X13 F X13 6,3
UCF X14 70 197 152 37 22 60 23 81,5 77,8 33,3 M20 UC X14 F X14 7,0
UCF X15 75 197 152 40 24 68 23 89,3 82,6 33,3 M20 UC X15 F X15 8,4
UCF X16 80 214 171 40 24 70 23 91,6 85,7 34,1 M20 UC X16 F X16 9,4
UCF X17 85 214 171 40 24 70 23 96,3 96 39,7 M20 UC X17 F X17 10,8
UCF X18 90 214 171 45 24 76 23 106,1 104 42,9 M20 UC X18 F X18 11,9
UCF X20 100 268 211 59 28 97 31 117,3 117,5 49,2 M27 UC X20 F X20 19,4
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 251
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
UCFL 201 12 113 90 15 11 25,5 12 60 33,3 31 12,7 M10 UC 201 FL 201 0,48
UCFL 202 15 113 90 15 11 25,5 12 60 33,3 31 12,7 M10 UC 202 FL 202 0,48
UCFL 203 17 113 90 15 11 25,5 12 60 33,3 31 12,7 M10 UC 203 FL 203 0,48
UCFL 204 20 113 90 15 11 25,5 12 60 33,3 31 12,7 M10 UC 204 FL 204 0,48
UCFL 205 25 130 99 16 13 27 16 68 35,7 34 14,3 M14 UC 205 FL 205 0,64
UCFL 206 30 148 117 18 13 31 16 80 40,2 38,1 15,9 M14 UC 206 FL 206 0,93
UCFL 207 35 161 130 19 14 34 16 90 44,4 42,9 17,5 M14 UC 207 FL 207 1,2
UCFL 208 40 175 144 21 14 36 16 100 51,2 49,2 19 M14 UC 208 FL 208 1,6
UCFL 209 45 188 148 22 15 38 19 108 52,2 49,2 19 M16 UC 209 FL 209 1,9
UCFL 210 50 197 157 22 15 40 19 115 54,6 51,6 19 M16 UC 210 FL 210 2,2
UCFL 211 55 224 184 25 18 43 19 130 58,4 55,6 22,2 M16 UC 211 FL 211 3,3
UCFL 212 60 250 202 29 18 48 23 140 68,7 65,1 25,4 M20 UC 212 FL 212 4,2
UCFL 213 65 258 210 30 20 50 23 155 69,7 65,1 25,4 M20 UC 213 FL 213 5,1
UCFL 214 70 265 216 31 20 54 23 160 75,4 74,6 30,2 M20 UC 214 FL 214 5,7
UCFL 215 75 275 225 35 20 56 23 165 78,5 77,8 33,3 M20 UC 215 FL 215 6,4
UCFL 216 80 290 233 35 20 59 25 180 83,3 82,6 33,3 M22 UC 216 FL 216 7,8
UCFL 217 85 305 248 36 22 63 25 190 87,6 85,7 34,1 M22 UC 217 FL 217 9,8
UCFL 218 90 320 265 40 23 68 25 205 96,3 96,0 39,7 M22 UC 218 FL 218 12,3
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
252 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
UCFL X05 25 141 117 18 13 30 12 83 40,2 38,1 15,9 M10 UC X05 FL X05 1,1
UCFL X06 30 156 130 19 14 34 16 95 44,4 42,9 17,5 M14 UC X06 FL X06 1,5
UCFL X07 35 171 144 21 14 38 16 105 51,2 49,2 19 M14 UC X07 FL X07 1,9
UCFL X08 40 179 148 22 14 40 16 111 52,2 49,2 19 M14 UC X08 FL X08 2,1
UCFL X09 45 189 157 23 14 40 16 116 55,6 51,6 19 M14 UC X09 FL X09 2,4
UCFL X10 50 216 184 26 20 44 19 133 59,4 55,6 22,2 M16 UC X10 FL X10 3,8
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 253
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
d[mm] o g p q s b k e a W j l h BI n [Kg]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
254 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
d[mm] o g p q s b k e a W j l h BI n [Kg]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 255
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
UCFC 201 12 100 78 55,1 10 25,5 12 5 7 20,5 62 28,3 31 12,7 M10 UC 201 FC 201 0,78
UCFC 202 15 100 78 55,1 10 25,5 12 5 7 20,5 62 28,3 31 12,7 M10 UC 202 FC 202 0,78
UCFC 203 17 100 78 55,1 10 25,5 12 5 7 20,5 62 28,3 31 12,7 M10 UC 203 FC 203 0,78
UCFC 204 20 100 78 55,1 10 25,5 12 5 7 20,5 62 28,3 31 12,7 M10 UC 204 FC 204 0,78
UCFC 205 25 115 90 63,6 10 27 12 6 7 21 70 29,7 34 14,3 M10 UC 205 FC 205 0,95
UCFC 206 30 125 100 70,7 10 31 12 8 8 23 80 32,2 38,1 15,9 M10 UC 206 FC 206 1,3
UCFC 207 35 135 110 77,8 11 34 14 8 9 26 90 36,4 42,9 17,5 M12 UC 207 FC 207 1,7
UCFC 208 40 145 120 84,8 11 36 14 10 9 26 100 41,2 49,2 19 M12 UC 208 FC 208 2
UCFC 209 45 160 132 93,3 10 38 16 12 14 26 105 40,2 49,2 19 M14 UC 209 FC 209 2,6
UCFC 210 50 165 138 97,6 10 40 16 12 14 28 110 42,6 51,6 19 M14 UC 210 FC 210 2,9
UCFC 211 55 185 150 106,1 13 43 19 12 15 31 125 46,4 55,6 22,2 M16 UC 211 FC 211 4,2
UCFC 212 60 195 160 113,1 17 48 19 12 15 36 135 56,7 65,1 25,4 M16 UC 212 FC 212 5,0
UCFC 213 65 205 170 120,2 16 50 19 14 15 36 145 55,7 65,1 25,4 M16 UC 213 FC 213 5,6
UCFC 214 70 215 177 125,1 17 54 19 14 18 40 150 61,4 74,6 30,2 M16 UC 214 FC 214 6,8
UCFC 215 75 220 184 130,1 18 56 19 16 18 40 160 62,5 77,8 33,3 M16 UC 215 FC 215 7,2
UCFC 216 80 240 200 141,4 18 58 23 16 18 42 170 67,3 82,69 33,3 M20 UC 216 FC 216 8,7
UCFC 217 85 250 208 147,1 18 63 23 18 20 45 180 69,6 85,7 34,1 M20 UC 217 FC 217 10,3
UCFC 218 90 265 220 155,5 22 68 23 18 20 50 190 78,3 96 39,7 M20 UC 218 FC 218 13,3
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
256 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
d[mm] a l BI n [Kg]
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 257
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
258 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 259
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
260 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
SOPORTES UCFA200
PILLOW BLOCKS UCFA200
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 261
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de fundición con rodamientos de acero al cromo
SOPORTES UCFB200
PILLOW BLOCKS UCFB200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] w b c D l s g h j e i z Bi n [mm] [Kg]
UCFB 201 12 110 62 52 52 24 9,5 13 42 27 32 13,5 31,8 31 12,7 M8 UC 201 FB 201 0,64
UCFB 202 15 110 62 52 52 24 9,5 13 42 27 32 13,5 31,8 31 12,7 M8 UC 202 FB 202 0,64
UCFB 203 17 110 62 52 52 24 9,5 13 42 27 32 13,5 31,8 31 12,7 M8 UC 203 FB 203 0,64
UCFB 204 20 110 62 52 52 24 9,5 13 42 27 32 13,5 31,8 31 12,7 M8 UC 204 FB 204 0,64
UCFB 205 25 116 68 52 56 26 9,5 13 45 27 34 15 34,7 34 14,3 M8 UC 205 FB 205 0,68
UCFB 206 30 130 78 55 65 29 9,5 13 50 29 40 17 39,2 38,1 15,9 M8 UC 206 FB 206 0,92
UCFB 207 35 144 90 62 70 33 9,5 15 55 32 46 19 44,4 42,9 17,5 M8 UC 207 FB 207 1,3
UCFB 208 40 164 100 72 78 34 11,1 16 60 41 50 20 50,2 49,2 19 M10 UC 208 FB 208 1,8
UCFB 209 45 175 106 76 80 34 11,1 18 65 43 54 20 50,2 49,2 19 M10 UC 209 FB 209 2
UCFB 210 50 184 112 82 86 35 11,1 18 68 46 58 20 52,6 51,6 19 M10 UC 210 FB 210 2,3
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
262 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de chapa de acero con rodamientos de acero al cromo
Steel plate pillow blocks with chrome steel bearings
SOPORTES SAPP200
PILLOW BLOCKS SAPP200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] h a e b s g w k Bi n [mm] [kg]
SAPP 201 12 22,2 86 68 25 9,5 3 43,8 28,6 28,6 6 M8 SA 201 PP 201 0,19
SAPP 202 15 22,2 86 68 25 9,5 3 43,8 28,6 28,6 6 M8 SA 202 PP 202 0,19
SAPP 203 17 22,2 86 68 25 9,5 3 43,8 28,6 28,6 6 M8 SA 203 PP 203 0,19
SAPP 204 20 25,4 98 76 32 9,5 3 50,5 33,3 31 7 M8 SA 204 PP 204 0,23
SAPP 205 25 28,6 108 86 32 11,5 4 56,6 38,1 31 7,5 M10 SA 205 PP 205 0,32
SAPP 206 30 33,3 117 95 38 11,5 4 66,3 44,5 35,7 8 M10 SA 206 PP 206 0,5
SOPORTES SBPP200
PILLOW BLOCKS SBPP200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] h a e b s g w Bi n [mm] [kg]
SBPP 201 12 22,2 86 68 25 9,5 3 43,8 22 6 M8 SB 201 PP 201 0,16
SBPP 202 15 22,2 86 68 25 9,5 3 43,8 22 6 M8 SB 202 PP 202 0,16
SBPP 203 17 22,2 86 68 25 9,5 3 43,8 22 6 M8 SB 203 PP 203 0,16
SBPP 204 20 25,4 98 76 32 9,5 3 50,5 25 7 M8 SB 204 PP 204 0,23
SBPP 205 25 28,6 108 86 32 11,5 4 56,6 27 7,5 M10 SB 205 PP 205 0,28
SBPP 206 30 33,3 117 95 38 11,5 4 66,3 30 8 M10 SB 206 PP 206 0,47
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 263
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de chapa de acero con rodamientos de acero al cromo
Steel plate pillow blocks with chrome steel bearings
STEEL PLATE PILLOW BLOCKS SAPF STTEL PLATE PILLOW BLOCKS SBPF
SOPORTES SAPF200
PILLOW BLOCKS SAPF200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e M t s k Bi n [mm] [kg]
SAPF 201 12 81 63,5 7 2 7,1 28,6 28,6 6 M6 SA 201 PF 201 0,3
SAPF 202 15 81 63,5 7 2 7,1 28,6 28,6 6 M6 SA 202 PF 202 0,3
SAPF 203 17 81 63,5 7 2 7,1 28,6 28,6 6 M6 SA 203 PF 203 0,3
SAPF 204 20 90 71,5 8 2 9 33,3 31 7 M8 SA 204 PF 204 0,33
SAPF 205 25 95 76 9 2 9 38,1 31 7,5 M8 SA 205 PF 205 0,42
SAPF 206 30 113 90,5 9,5 2,6 11 44,5 35,7 8 M10 SA 206 PF 206 0,65
SAPF 207 35 122 100 11 2,6 11 55,6 38,9 8,5 M10 SA 207 PF 207 0,9
SOPORTES SBPF200
PILLOW BLOCKS SBPF200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e M t s Bi n [mm] [kg]
SBPF 201 12 81 63,5 7 2 7,1 22 6 M6 SB 201 PF 201 0,27
SBPF 202 15 81 63,5 7 2 7,1 22 6 M6 SB 202 PF 202 0,27
SBPF 203 17 81 63,5 7 2 7,1 22 6 M6 SB 203 PF 203 0,27
SBPF 204 20 90 71,5 8 2 9 25 7 M8 SB 204 PF 204 0,33
SBPF 205 25 95 76 9 2 9 27 7,5 M8 SB 205 PF 205 0,38
SBPF 206 30 113 90,5 9,5 2,6 11 30 8 M10 SB 206 PF 206 0,62
SBPF 207 35 122 100 11 2,6 11 32 8,5 M10 SB 207 PF 207 0,82
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
264 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de chapa de acero con rodamientos de acero al cromo
Steel plate pillow blocks with chrome steel bearings
SOPORTES SAPFL200
PILLOW BLOCKS SAPFL200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e M b t s k Bi n [mm] [kg]
SAPFL 201 12 81 63,5 7 59 2 7,1 28,6 28,6 6 M6 SA 201 PFL 201 0,22
SAPFL 202 15 81 63,5 7 59 2 7,1 28,6 28,6 6 M6 SA 202 PFL 202 0,22
SAPFL 203 17 81 63,5 7 59 2 7,1 28,6 28,6 6 M6 SA 203 PFL 203 0,22
SAPFL 204 20 90 71,5 8 67 2 9 33,3 31 7 M8 SA 204 PFL 204 0,24
SAPFL 205 25 95 76 9 71 2 9 38,1 31 7,5 M8 SA 205 PFL 205 0,32
SAPFL 206 30 113 90,5 9,5 84 2,6 11 44,5 35,7 8 M10 SA 206 PFL 206 0,41
SOPORTES SBPFL200
PILLOW BLOCKS SBPFL200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e M b t s Bi n [mm] [kg]
SBPFL 201 12 81 63,5 7 59 2 7,1 22 6 M6 SB 201 PFL 201 0,19
SBPFL 202 15 81 63,5 7 59 2 7,1 22 6 M6 SB 202 PFL 202 0,19
SBPFL 203 17 81 63,5 7 59 2 7,1 22 6 M6 SB 203 PFL 203 0,19
SBPFL 204 20 90 71,5 8 67 2 9 25 7 M8 SB 204 PFL 204 0,24
SBPFL 205 25 95 76 9 71 2 9 27 7,5 M8 SB 205 PFL 205 0,28
SBPFL 206 30 113 90,5 9,5 84 2,6 11 30 8 M10 SB 206 PFL 206 0,38
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 265
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS UC200
BEARINGS UC200
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
266 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS UC X00
BEARINGS UC X00
RODAMIENTOS UC 300
BEARINGS UC 300
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 267
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS HC200
BEARINGS HC200
dinám. estát
d [mm] D Bi Be n m i k H G ds [Kg]
Cr (kN) Cor (kN)
HC 203 17 40 37,3 14 13,9 13,9 9,5 28,6 13,5 5 M6x1 900 510 0,25
HC 204 20 47 43,7 17 17,1 17,1 9,5 33,3 13,5 5 M6x1 1010 630 0,22
HC 205 25 52 44,3 17 17,4 17,4 9,5 38,1 13,5 5 M6x1 1100 710 0,25
HC 206 30 62 48,4 19 18,2 18,2 11,9 44,5 15,9 6 M8x1 1530 1020 0,41
HC 207 35 72 51,1 20 18,8 18,8 13,5 55,6 17,5 6,5 M8x1 2020 1390 0,61
HC 208 40 80 56,3 21 21,4 21,4 13,5 60,3 18,3 6,5 M8x1 2280 1600 0,78
HC 209 45 85 56,3 22 21,4 21,4 13,5 63,5 18,3 6,5 M8x1 2570 1820 0,85
HC 210 50 90 62,7 23 24,6 24,6 13,5 69,9 18,3 6,5 M8x1 2750 2020 1,01
HC 211 55 100 71,4 25 27,8 27,7 15,9 76,2 20,7 8 M10x1 3400 2550 1,39
HC 212 60 110 77,8 26 31 30,9 15,9 84,2 22,3 8 M10x1 4100 3150 1,87
HC 213 65 120 85,7 28 34,1 34,5 17,1 86 23,5 8,5 M10x1 4500 3470 2,51
HC 215 75 130 92,1 30 37,3 37,7 17,1 102 23,5 8,5 M12x1,5 5300 4200 2,74
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
268 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS SER200
BEARINGS SER200
Diámetro
Rodamiento Dimensiones Capacidad de carga Peso
eje
Shaft
Bearing Dimensions [mm] Basic load rating Weight
diameter
dinám. estát
d [mm] D Bi Be n m E a h R J P G ds [Kg]
C r (kN) C or (kN)
SER 201 12 47 31 15,9 12,7 18,3 12,1 1,07 4 4,14 2,38 52,7 5 M6x1 1250 650 0,26
SER 202 15 47 31 15,9 12,7 18,3 12,1 1,07 4 4,14 2,38 52,7 5 M6x1 1250 650 0,25
SER 203 17 47 31 15,9 12,7 18,3 12,1 1,07 4 4,14 2,38 52,7 5 M6x1 1250 650 0,23
SER 204 20 47 31 15,9 12,7 18,3 12,1 1,07 4 4,14 2,38 52,7 5 M6x1 1250 650 0,22
SER 205 25 52 34,9 19,1 13,1 21,8 15,3 1,07 5,2 5,74 2,38 57,9 5,6 M6x1 1400 750 0,27
SER 206 30 62 38,1 22,2 15,9 22,2 17 1,65 5,6 5,92 3,18 67,7 5,6 M6x1 1900 1100 0,39
SER 207 35 72 42,9 23,8 17,5 25,4 18,6 1,65 5,6 6,72 3,18 78,6 6,4 M8x1 2550 1500 0,56
SER 208 40 80 49,2 27,8 19 30,2 22,6 1,65 6,4 8,72 3,18 86,6 8 M8x1 2950 1800 0,72
SER 209 45 85 49,2 27,8 19 30,2 22,6 1,65 6,4 8,72 3,18 91,6 8 M8x1 3180 2050 0,9
SER 210 50 90 51,6 28,6 19 32,6 22,6 2,41 7,5 8,32 3,18 96,5 9,5 M10x1 3500 2300 0,93
SER 211 55 100 55,6 30,2 22,2 33,4 24,2 2,41 7,5 9,12 3,18 106,5 10 M10x1 4350 2900 1,28
SER 212 60 110 65,1 31,8 25,4 39,7 25,8 2,41 7,5 9,92 3,18 116 10 M10x1 4750 3250 1,71
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 269
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS UK200
BEARINGS UK200
Diámetro
Rodamiento Dimensiones Capacidad de carga Peso
interior
Bearing Inner diameter Dimensions [mm] Basic load rating Weight
dinám. estát
d [mm] D Bi Be Bi (TRL) T [Kg]
Cr (kN) Cor (kN)
UK 205 25 52 23 17 24 4,2 1400 750 0,16
UK 206 30 62 26 19 27 5,2 1900 1100 0,25
UK 207 35 72 28 20 30 5,6 2550 1500 0,38
UK 208 40 80 29 21 34 6,2 2950 1800 0,47
UK 209 45 85 31 22 36 6,3 3180 2050 0,52
UK 210 50 90 32 24 36 6,5 3500 2300 0,61
UK 211 55 100 34 25 40 7 4350 2900 0,8
UK 212 60 110 36 27 47 7 4750 3250 1,03
UK 213 65 120 36 28 47 8,5 5700 4000 1,33
UK 215 75 130 41 30 51 9,2 6600 4950 1,5
UK 216 80 140 44 33 55 9,6 7150 5400 2,00
UK 217 85 150 46 35 57 10,5 8300 6350 2,48
UK 218 90 160 48 37 63 11,1 9500 7100 3,10
Diámetro del eje al que se acopla este tipo de rodamiento a de ser 5mm menor al indicado en la columna d
The shaft diameter to which this bearing is applied must be 5mm below the one indicated in column d.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
270 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS SA200
BEARINGS SA200
Diámetro
Rodamiento Dimensiones Capacidad de carga Peso
eje
Shaft
Bearing Dimensions [mm] Basic load rating Weight
diameter
dinám. estát
d [mm] Be D B1 n m Bi k H G h ds [Kg]
C r (kN) C or (kN)
SA 201 12 12 40 19,1 6 13,1 28,6 28,6 13,5 5 3,6 M6x1 900 500 0,13
SA 202 15 12 40 19,1 6 13,1 28,6 28,6 13,5 5 3,6 M6x1 900 500 0,13
SA 203 17 12 40 19,1 6 13,1 28,6 28,6 13,5 5 3,6 M6x1 900 500 0,13
SA 204 20 14 47 21,5 7 14,5 31 33,3 13,5 5 3,9 M6x1 1250 650 0,15
SA 205 25 15 52 21,5 7,5 14 31 38,1 13,5 5 3,9 M6x1 1400 750 0,22
SA 206 30 16 62 23,8 8 15,8 35,7 44,5 15,9 6 5 M8x1 1900 1100 0,3
SA 207 35 17 72 25,4 8,5 16,9 38,9 55,6 17,5 6,5 5,5 M8x1 2550 1500 0,5
SA 208 40 18 80 30,2 9 21,2 43,7 60,3 18,3 6,5 6 M8x1 2950 1800 0,67
SA 209 45 19 85 30,2 9,5 20,7 43,7 63,5 18,3 6,5 6,3 M8x1 3180 2050 0,73
SA 210 50 20 90 30,2 10 20,2 43,7 69,9 18,3 6,5 6,5 M8x1 3500 2300 0,83
SA 211 55 24 100 32,4 12 20,4 48,4 76,2 20,7 8 7,2 M10x1,25 4350 2900 0,87
SA 212 60 24 110 33,4 12 21,4 53,1 84,2 22,3 8 8 M10x1,25 4750 3250 1,3
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 271
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
RODAMIENTOS SB200
BEARINGS SB200
dinám. estát
d [mm] Be D Bi n m G h ds [Kg]
C r (kN) C or (kN)
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
272 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero al cromo
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 273
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
SOPORTES UCP200
PILLOW BLOCKS UCP 200
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] h a e b s2 s1 g w Bi n [mm] [Kg]
UCP 201 12 33,3 127 95 38 19 13 14 62 31 12,7 M10 UC 201 P 201 0,65
UCP 202 15 33,3 127 95 38 19 13 14 62 31 12,7 M10 UC 202 P 202 0,63
UCP 203 17 33,3 127 95 38 19 13 14 62 31 12,7 M10 UC 203 P 203 0,62
UCP 204 20 33,3 127 95 38 19 13 14 65 31 12,7 M10 UC 204 P 204 0,65
UCP 205 25 36,5 140 105 38 19 13 15 70 34 14,3 M10 UC 205 P 205 0,79
UCP 206 30 42,9 165 121 48 21 17 16 83 38,1 15,9 M14 UC 206 P 206 1,3
UCP 207 35 47,6 167 127 48 21 17 17 94 42,9 17,5 M14 UC 207 P 207 1,6
UCP 208 40 49,2 184 137 54 21 17 18 100 49,2 19 M14 UC 208 P 208 2
UCP 209 45 54 190 146 54 22 17 20 108 49,2 19 M14 UC 209 P 209 2,3
UCP 210 50 57,2 206 159 60 25 20 21 114 51,6 19 M16 UC 210 P 210 2,7
UCP 211 55 63,5 219 171 60 25 20 22 126 55,6 22,2 M16 UC 211 P 211 3,3
UCP 212 60 69,8 241 184 70 25 20 25 138 65,1 25,4 M16 UC 212 P 212 4,7
UCP 213 65 76,2 265 203 70 29 25 27 150 65,1 25,4 M20 UC 213 P 213 5,6
UCP 214 70 79,4 266 210 72 31 25 27 156 74,6 30,2 M20 UC 214 P 214 7,3
UCP 215 75 82,6 275 217 74 31 25 28 162 77,8 33,3 M20 UC 215 P 215 7,9
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
274 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] h a e b s2 s1 g w Bi n [mm] [Kg]
UCPH 201 12 70 127 95 40 19 13 15 101 31 12,7 M10 UC 201 PH 201 0,95
UCPH 202 15 70 127 95 40 19 13 15 101 31 12,7 M10 UC 202 PH 202 0,95
UCPH 203 17 70 127 95 40 19 13 15 101 31 12,7 M10 UC 203 PH 203 0,95
UCPH 204 20 70 127 95 40 19 13 15 101 31 12,7 M10 UC 204 PH 204 0,95
UCPH 205 25 80 140 105 50 19 13 16 114 34 14,3 M10 UC 205 PH 205 1,2
UCPH 206 30 90 165 121 50 21 17 18 130 38,1 15,9 M14 UC 206 PH 206 1,9
UCPH 207 35 95 167 127 60 21 17 18 140 42,9 17,5 M14 UC 207 PH 207 2
UCPH 208 40 100 184 137 70 25 17 20 150 49,2 19 M14 UC 208 PH 208 2,8
UCPH 209 45 105 190 146 70 25 17 20 158 49,2 19 M14 UC 209 PH 209 3,2
UCPH 210 50 110 206 159 70 25 20 22 165 51,6 19 M16 UC 210 PH 210 3,6
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 275
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] h a e b s g w D Bi n m [mm] [Kg]
UCPA 204 20 30,2 76 52 38 M10 11 62 13 31 12,7 18,3 M10 UC 204 PA 204 0,6
UCPA 205 25 36,5 84 56 38 M10 12 72 13 34 14,3 19,7 M10 UC 205 PA 205 0,8
UCPA 206 30 42,9 94 66 48 M14 12 84 18 38,1 15,9 22,2 M14 UC 206 PA 206 1,2
UCPA 207 35 47,6 110 80 48 M14 13 95 20 42,9 17,5 25,4 M14 UC 207 PA 207 1,7
UCPA 208 40 49,2 116 84 54 M14 13 100 20 49,2 19 30,2 M14 UC 208 PA 208 2
UCPA 209 45 54,2 120 90 54 M14 13 108 25 49,2 19 30,2 M14 UC 209 PA 209 2,2
UCPA 210 50 57,2 130 94 60 M16 14 116 25 51,6 19 32,6 M16 UC 210 PA 210 2,8
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
276 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] a e i g l s z Bi n m [mm] [Kg]
UCF 201 12 76,2 54 15,08 11 26,5 10,3 32,7 31 12,7 18,3 M10 UC 201 F 201 0,5
UCF 202 15 76,2 54 15,08 11 26,5 10,3 32,7 31 12,7 18,3 M10 UC 202 F 202 0,5
UCF 203 17 76,2 54 15,08 11 26,5 10,3 32,7 31 12,7 18,3 M10 UC 203 F 203 0,5
UCF 204 20 86 64 15 11 26,5 12 33,3 31 12,7 18,3 M10 UC 204 F 204 0,58
UCF 205 25 95 70 16 13 27,5 12 35,7 34 14,3 19,7 M10 UC 205 F 205 0,83
UCF 206 30 108 83 18 13 31 12 40,2 38,1 15,9 22,2 M10 UC 206 F 206 1,1
UCF 207 35 117 92 19 15 32,5 14 44,4 42,9 17,5 25,4 M14 UC 207 F 207 1,6
UCF 208 40 130 102 21 15 35 16 51,2 49,2 19 30,2 M14 UC 208 F 208 1,9
UCF 209 45 137 105 22 16 36,5 16 52,2 49,2 19 30,2 M14 UC 209 F 209 2,4
UCF 210 50 143 111 22 16 37 16 54,6 51,6 19 32,6 M14 UC 210 F 210 2,6
UCF 211 55 162 130 25 18 43 19 58,4 55,6 22,2 33,4 M16 UC 211 F 211 3,7
UCF 212 60 175 143 29 18 48 19 68,7 65,1 25,4 39,7 M16 UC 212 F 212 4,3
UCF 213 65 187 149 30 19 50 19 69,7 65,1 25,4 39,7 M16 UC 213 F 213 5,2
UCF 214 70 193 152 31 22 54 19 75,4 74,6 30,2 44,4 M16 UC 214 F 214 5,8
UCF 215 75 200 159 34 22 56 19 78,5 77,8 33,3 44,5 M16 UC 215 F 215 6,2
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 277
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
278 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
SOPORTES UCFA200
PILLOW BLOCKS UCFA200
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e i g l s S1 b z f Bi n S2 [mm] [Kg]
UCFA 201 12 98 78 13,8 12 25,5 10 10 59 32,1 50 31 12,7 40 M8 UC 201 FA 201 0,47
UCFA 202 15 98 78 13,8 12 25,5 10 10 59 32,1 50 31 12,7 40 M8 UC 202 FA 202 0,47
UCFA 203 17 98 78 13,8 12 25,5 10 10 59 32,1 50 31 12,7 40 M8 UC 203 FA 203 0,47
UCFA 204 20 98 78 13,8 12 25,5 10 10 59 32,1 50 31 12,7 40 M8 UC 204 FA 204 0,47
UCFA 205 25 124 98 16,0 14 27 11 13 70 35,7 64 34 14,3 51 M10 UC 205 FA 205 0,68
UCFA 206 30 141 117 17,8 14 31 11 13 83 40 68 38,1 15,9 58 M10 UC 206 FA 206 1
UCFA 207 35 155 130 18,6 16 34 13 15 96 44 75 42,9 17,5 66 M12 UC 207 FA 207 1,4
UCFA 208 40 171 144 20,8 16 38 13 15 105 51 84 49,2 19 71 M12 UC 208 FA 208 1,7
UCFA 209 45 179 148 21,8 18 40 15 17 111 52 88 49,2 19 72 M14 UC 209 FA 209 2,1
UCFA 210 50 189 157 22,5 18 40 15 17 116 55,1 92 51,6 19 76 M14 UC 210 FA 210 2,4
UCFA 211 55 216 184 25,7 20 44 16 17 133 59,1 102 55,6 22,2 86 M14 UC 211 FA 211 3,4
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 279
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
SOPORTES UCFB200
PILLOW BLOCKS UCFB200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a b c f l s g h j e i z Bi n [mm] [Kg]
UCFB 204 20 110 62 52 52 24 10 13 42 27 32 13,5 31,8 31 12,7 M8 UC 204 FB 204 0,6
UCFB 205 25 116 68 52 56 26 10 13 45 27 34 15 34,7 34 14,3 M8 UC 205 FB 205 0,68
UCFB 206 30 130 78 55 65 29 10 13 50 29 40 17 39,2 38,1 15,9 M8 UC 206 FB 206 0,9
UCFB 207 35 144 90 62 70 33 10 15 55 32 46 19 44,4 42,9 17,5 M8 UC 207 FB 207 1,3
UCFB 208 40 164 100 72 78 34 12 16 60 41 50 20 50,2 49,2 19 M10 UC 208 FB 208 1,98
UCFB 209 45 174 106 76 80 34 12 18 65 43 54 20 50,2 49,2 19 M10 UC 209 FB 209 1,98
UCFB 210 50 184 112 82 86 35 12 18 68 46 58 20 52,6 51,6 19 M10 UC 210 FB 210 2,2
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
280 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 281
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
282 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 283
ROLLER., reserves the right to modify any feature without prior notice.
Soportes de acero inoxidable con rodamientos de acero inoxidable
Stainless steel pillow blocks with stainless steel bearings
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
284 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
SOPORTES UCP200
PILLOW BLOCKS UCP 200
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] h a e b s2 s1 g w Bi n [mm] [Kg]
UCP 204 20 33,3 127 95 38 14 11 14,2 65,5 31 12,7 M10 UC 204 P 204 0,13
UCP 205 25 36,5 140,5 105 38 14 11 14,5 71 34 14,3 M10 UC 205 P 205 0,14
UCP 206 30 42,9 163 119 46 18 14 17,8 84 38,1 15,9 M14 UC 206 P 206 0,24
UCP 207 35 47,6 168 127 48 18 14 18 94,5 42,9 17,5 M14 UC 207 P 207 0,27
UCP 208 40 49,2 184 137 54 18 14 19,5 101 49,2 19 M14 UC 208 P 208 0,35
UCP 209 45 54 192 146 54 20 17 23 106 49,2 19 M14 UC 209 P 209 0,41
UCP 210 50 57,2 206 159 60 20 17 23 114 51,6 19 M14 UC 210 P 210 0,47
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 285
ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] a e i g l s z Bi n [mm] [Kg]
UCF 204 20 86 63,5 16,3 13,4 27,8 11 34,6 31 12,7 M10 UC 204 F 204 0,12
UCF 205 25 95 70 17 14,3 28,5 11 36,7 34 17 M10 UC 205 F 205 0,15
UCF 206 30 107 83 19 14,3 31,5 11 41,2 38,1 19 M10 UC 206 F 206 0,18
UCF 207 35 118 92 21,5 15,5 34,5 13 46,9 42,9 21,5 M14 UC 207 F 207 0,25
UCF 208 40 130 102 23 17 36,5 14 53,3 49,2 23 M14 UC 208 F 208 0,36
UCF 209 45 137 105 24 19 41 17 54,2 49,2 24 M14 UC 209 F 209 0,42
UCF 210 50 143 111 25 21 43 17 57,6 51,6 25 M14 UC 210 F 210 0,49
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
286 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 287
ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
288 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Reference Shaft diameter Dimensions [mm] Bolt used Bearing Housing Weight
d [mm] h a e b s g w Bi n [mm] [Kg]
UCPA 204 20 33,3 76 52 38 M10 13 64 31 12,7 M10 UC 204 PA 204 0,09
UCPA 205 25 36,5 84 56 38 M10 13 72 34,1 14,3 M10 UC 205 PA 205 0,12
UCPA 206 30 42,9 94 66 48 M14 16 84 38,1 15,9 M14 UC 206 PA 206 0,18
UCPA 207 35 47,6 110 80 48 M14 18 95 49,2 17,5 M14 UC 207 PA 207 0,26
UCPA 208 40 49,2 116 84 54 M14 20 100 49,2 19 M14 UC 208 PA 208 0,3
UCPA 209 45 54,2 120 90 54 M14 20 108 49,2 19 M14 UC 209 PA 209 0,35
UCPA 210 50 57,2 130 94 60 M16 22 116 51,6 19 M16 UC 210 PA 210 0,45
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 289
ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
290 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
SOPORTES UCFB200
PILLOW BLOCKS UCFB200
Diámetro Tornillo
Referencia Dimensiones Rodamiento Soporte Peso
eje prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a f e h l j g w b s n [mm] [Kg]
UCFB 201 12 76,2 62 38,1 42,9 33,7 22,2 11,4 108 63,5 10,7 12,7 M8 UC 201 FB 201 0,08
UCFB 202 15 76,2 62 38,1 42,9 33,7 22,2 11,4 108 63,5 10,7 12,7 M8 UC 202 FB 202 0,08
UCFB 203 17 76,2 62 38,1 42,9 33,7 22,2 11,4 108 63,5 10,7 12,7 M8 UC 203 FB 203 0,08
UCFB 204 20 76,2 62 38,1 42,9 33,7 22,2 11,4 108 63,5 10,7 12,7 M8 UC 204 FB 204 0,08
UCFB 205 25 85,7 63,5 41,3 46 41,2 28,6 11,4 120,6 70 10,7 14,3 M8 UC 205 FB 205 0,11
UCFB 206 30 96,5 76 47,6 52,4 41,5 31,8 13,3 138,5 83 10,7 15,9 M8 UC 206 FB 206 0,16
UCFB 207 35 109,5 89 50,8 60,3 47,1 31,8 16,1 157 95 13,1 17,5 M8 UC 207 FB 207 0,23
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 291
ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
SOPORTES UCFA200
PILLOW BLOCKS UCFA200
Tornillo
Referencia Diámetro eje Dimensiones Rodamiento Soporte Peso
prisionero
Shaft
Reference Dimensions [mm] Bolt used Bearing Housing Weight
diameter
d [mm] a e i g l s S1 b z f Bi n S2 [mm] [Kg]
UCFA 204 20 102 78 15 12 25,5 10 10 59 32,1 54 31 12,7 40 M8 UC 204 FA 204 0,08
UCFA 205 25 125 98 16 14 27 12 13 70 35,7 65 34 14,3 51 M10 UC 205 FA 205 0,11
UCFA 206 30 144 117 18 14 31 12 13 83 40 72 38,1 15,9 58 M10 UC 206 FA 206 0,16
UCFA 207 35 161 130 19 16 34 14 15 96 44 82 42,9 17,5 66 M12 UC 207 FA 207 0,23
UCFA 208 40 175 144 21 16 36 14 15 105 51 87 49,2 19 71 M12 UC 208 FA 208 0,29
UCFA 209 45 181 148 22 18 38 16 17 111 52 90 49,2 19 72 M14 UC 209 FA 209 0,33
UCFA 210 50 190 157 22 18 40 16 17 116 55,1 94 51,6 19 76 M14 UC 210 FA 210 0,42
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
292 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Soportes termoplásticos con rodamientos de acero inoxidable
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 293
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero inoxidable
RODAMIENTOS UC200
BEARINGS UC200
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
294 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero inoxidable
RODAMIENTOS UK200
BEARINGS UK200
Diámetro
Rodamiento Dimensiones Capacidad de carga Peso
interior
Bearing Inner diameter Dimensions [mm] Basic load rating Weight
dinám. estát
d [mm] D Bi Be T [Kg]
Cr (kN) Cor (kN)
UK 205 25 52 23 17 4,5 1100 710 0,24
UK 206 30 62 26 19 5,14 1540 1020 0,41
UK 207 35 72 27 20 5,8 2030 1400 0,55
UK 208 40 80 29 21 6,2 2300 1600 0,75
UK 209 45 85 30 22 6,5 2570 1810 0,84
UK 210 50 90 31 23 6,5 2760 2010 0,95
UK 211 55 100 33 24 7,3 3400 2550 1,22
UK 212 60 110 36 26 7,7 4100 3150 1,56
Diámetro del eje al que se acopla este tipo de rodamiento a de ser 5mm menor al indicado en la columna d
The shaft diameter to which this bearing is applied must be 5mm below the one indicated in column d.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 295
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero inoxidable
RODAMIENTOS SA200
BEARINGS SA200
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
296 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero inoxidable
RODAMIENTOS SB200
BEARINGS SB200
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 297
ROLLER., reserves the right to modify any feature without prior notice.
Rodamientos de acero inoxidable
RODAMIENTOS HC200
BEARINGS HC200
dinám. estát
d [mm] D Bi Be n m i k H G ds [Kg]
Cr (kN) C or (kN)
HC 201 12 47 43,7 17 17,1 17,1 9,5 33,3 13,5 5 M6x1 750 400 0,27
HC 202 15 47 43,7 17 17,1 17,1 9,5 33,3 13,5 5 M6x0 750 400 0,24
HC 203 17 47 43,7 17 17,1 17,1 9,5 33,3 13,5 5 M6x1 750 400 0,23
HC 204 20 47 43,7 17 17,1 17,1 9,5 33,3 13,5 5 M6x1 1010 630 0,2
HC 205 25 52 44,4 17 17,5 17,4 9,5 38,1 13,5 5 M6x1 1100 710 0,27
HC 206 30 62 48,4 19 18,3 18,2 11,9 44,5 15,9 6 M8x1 1530 1020 0,42
HC 207 35 72 51,1 20 18,8 18,8 13,5 55,6 17,5 6,5 M8x1 2020 1390 0,64
HC 208 40 80 56,3 22 21,4 21,4 13,5 60,3 18,3 6,5 M8x1 2280 1600 0,84
HC 209 45 85 56,3 22 21,4 21,4 13,5 63,5 18,3 6,5 M8x1 2570 1820 0,88
HC 210 50 90 62,7 24 24,6 24,6 13,5 69,9 18,3 6,5 M8x1 2570 2020 1,01
HC 211 55 100 71,4 25 27,8 27,7 15,9 76,2 20,7 8 M10x1 3400 2550 1,43
HC 212 60 110 77,8 27 31 30,9 15,9 84,2 22,3 8 M10x1 4100 3150 1,9
HC 213 65 120 85,7 30 34,1 34,1 17,1 86 23 8,5 M10x1 4500 3470 2,36
HC 214 70 125 85,7 30 34,1 34,1 17,1 90 23,5 8,5 M10x1 4900 3810 2,41
HC 215 75 130 92,1 32 37,3 37,7 17,1 102 23,5 8,5 M10x1 5300 4200 2,74
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice.
298 - WWB
Rodamientos de acero inoxidable
RODAMIENTOS SER200
BEARINGS SER200
Diámetro Capacidad de
Rodamiento Dimensiones Peso
eje carga
Shaft
Bearing Dimensions [mm] Basic load rating Weight
diameter
dinám. estát
d [mm] D Bi Be r n m G ds h W P X S [Kg]
Cr (kN) Cor (kN)
SER 201 12 47 31 15,9 1 10,3 20,7 4,5 M6x0,75 3,8 29 52,7 16,15 41 1310 630 0,27
SER 202 15 47 31 15,9 1 10,3 20,7 4,5 M6x0,75 3,8 29 52,7 16,15 41 1310 630 0,25
SER 203 17 47 31 15,9 1 10,3 20,7 4,5 M6x0,75 3,8 29 52,7 16,15 41 1310 630 0,23
SER 204 20 47 31 15,9 1,5 10,3 20,7 4,5 M6x0,75 3,8 29 52,7 16,15 41 1310 630 0,22
SER 205 25 52 34,9 19 1,5 13,1 21,8 5 M6x0,75 5,2 34 57,9 15,75 41 1430 710 0,28
SER 206 30 62 38,1 22,2 1,5 15,9 22,2 5 M6x0,75 5,6 40,5 67,7 15,93 54,3 2000 1020 0,38
SER 207 35 72 42,9 23,8 2 17,5 25,4 6 M8x1 5,6 48 78,6 18,32 63,5 2640 1400 0,56
SER 208 40 80 49,2 27,8 2 19 30,2 8 M8x1 6,4 53 86,6 21,1 69,3 2990 1600 0,87
SER 209 45 85 49,2 27,8 2 19 30,2 8 M8x1 6,4 57,3 91,6 21,1 74,3 3350 1510 0,95
SER 210 50 90 51,6 28,6 2 19 32,6 9 M10x1,25 7,5 63 96,5 23,84 79,7 3600 2010 1,03
SER 211 55 100 55,6 30,2 2,5 22,2 33,4 9 M10x1,25 7,5 70 106,5 23,84 90,7 4400 2010 1,03
SER 212 60 110 65,1 31,8 2,5 25,4 39,7 10 M10x1,25 7,5 77 116,6 29,4 100 5350 3150 1,68
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
ROLLER., reserves the right to modify any feature without prior notice. WWB - 299
Bolas
Balls
BOLAS BALLS
Las bolas WWB se fabrican en diferentes materiales en WWB balls are produced in different materials depending
función de la aplicación a la que se destinan. on its application.
No sólo se dispone de bolas de acero al cromo para Not only are produced chrome steel balls for bearings.
rodamientos.
MATERIALES MATERIALS
n Acero al cromo DIN 100 Cr6 – AISI n Chrome steel DIN 100 Cr6 – AISI 52100
52100 temple hasta el núcleo: HRC 63±3. thorough hardened: HRC 63±3.
n Acero al carbono temple hasta el núcleo: n Carbon steel thorough hardened: HRC
HRC 63±3. 63±3.
n Acero inoxidable AISI 420 – 430 – 440 n Stainless steel AISI 420 – 430 – 440 – 304
– 304 – 316. – 316.
n Acero C10 con cementación superficial. n Iron C10 case hardened.
n Acero C10 zincado, tropicalizado o n Iron C10 zinc-plated, tropicalized or nickel
niquelado. plated.
n Acero C10 n Iron C10
n Latón, bronce, cobre, carburo de n Brass, bronze, copper, tungsten carbide.
tungsteno. n Hastelloy and special alloys.
n Aleación de níquel-hierro-molibdeno y
aleaciones especiales.
BOLAS DE ACERO AL CROMO PARA RODAMIENTOS BALLS MADE FROM CHROMESTEEL ROLLING
Las bolas WWB de acero de rodamientos templado tienen BEARINGS
una dureza de 58 a 66 HRC. Balls made from through – hardened rolling bearing steel
Se suministran en diversas clases con diferentes grados have hardness values from 58 to 66 HRC.
de precisión dimensional y de forma. WWB balls from rolling bearing steel are supplied according
to different grades of dimensional and shape precision.
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
300 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Bolas
Balls
Ball diameter D W Weight per 100 balls Ball diameter D W Designation Weight per 100 balls
Designation
2 - RB 2 0,0033 14 - RB 14 1,13
2,381 3/32 RB 2,381 0,0055 14,288 9/16 RB 14,288 1,2
2,5 - RB 2,5 0,0064
15 - RB 15 1,39
3 - RB 3 0,0111 15,081 19/32 RB 15,081 1,41
3,175 1/8 RB 3,175 0,0132 15,875 5/8 RB 15,875 1,65
3,5 - RB 3,5 0,0177
3,969 5/32 RB 3,969 0,0257 16 - RB 16 1,68
16,5 - RB 16,5 1,85
4 - RB 4 0,0263 16,669 21/32 RB 16,669 1,91
4,5 - RB 4,5 0,0374
4,762 3/16 RB 4,762 0,0446 17 - RB 17 2,02
17,462 11/16 RB 17,462 2,19
5 - RB 5 0,0514
5,5 - RB 5,5 0,0679 18 - RB 18 2,4
5,556 7/32 RB 5,556 0,0702 18,256 23/32 RB 18,256 2,5
6 - RB 6 0,0882 19 - RB 19 2,82
6,35 1/4 RB 6,35 0,103 19,05 3/4 RB 19,05 2,84
6,5 - RB 6,5 0,113 19,844 25/32 RB 19,844 3,24
7 - RB 7 0,141 20 - RB 20 3,29
7,144 9/32 RB 7,144 0,15 20,5 - RB 20,5 3,54
7,5 - RB 7,5 0,174 20,638 13/16 RB 20,638 3,62
7,938 5/16 RB 7,938 0,106
21 - RB 21 3,81
8 - RB 8 0,21
8,5 - RB 8,5 0,22 22 - RB 22 4,38
8,731 11/32 RB 8,731 0,266 22,225 7/8 RB 22,225 4,52
22,5 - RB 22,5 4,68
9 - RB 9 0,33
9,525 3/8 RB 9,525 0,355 23 - RB 23 5
23,812 15/16 RB 23,812 5,55
10 - RB 10 0,411
10,319 13/32 RB 10,319 0,443 24 - RB 24 5,68
10,5 - RB 10,5 0,476
25 - RB 25 6,42
11 - RB 11 0,547 25,4 1 RB 25,4 6,74
11,112 7/16 RB 11,112 0,564
11,5 - RB 11,5 0,625 26 - RB 26 7,23
11,906 15/32 RB 11,906 0,693 26,988 11/16 RB 26,988 8,08
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 301
ROLLER., reserves the right to modify any feature without prior notice.
Bolas
Balls
Ball diameter D W Weight per 100 balls Ball diameter D W Weight per 100 balls
Designation Designation
55 - RB 55 67,9
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
302 - WWB ROLLER., reserves the right to modify any feature without prior notice.
Bolas
Balls
ROLLER., se reserva el derecho a cualquier modificación de las características sin previo aviso.
WWB - 303
ROLLER., reserves the right to modify any feature without prior notice.
Distribuidor autorizado / Authorized distributor:
CENTRAL
Poligono Lezama-Legizamon C/ Zuberoa 1 2 Drcha 48450 Etxebarri-Vizcaya (Spain)
CENTRAL
Tel: +34 944269566 Fax: +34 944269283 E-mail: roller@roller.es
Ctra. Bilbao a S. Sebastián, Km. 5 / 48960 Galdácano - Vizcaya (Spain)
Tel: +34 94 426 95 66 Fax: +34 94 426 92 83 / E-mail: roller@roller.es