Documentos de Académico
Documentos de Profesional
Documentos de Cultura
net/publication/361211440
CITATIONS READS
0 132
1 author:
Nancy Molina
Universidad de La Salle
30 PUBLICATIONS 82 CITATIONS
SEE PROFILE
All content following this page was uploaded by Nancy Molina on 30 August 2022.
2022-06-09
Citación recomendada
Molina-Montoya NP. Impresión 3D y sus aplicaciones en optometría. Cienc Tecnol Salud Vis Ocul.
2022;(1): 7-9. doi: https://doi.org/10.19052/sv.vol20.iss1.1
This Editorial is brought to you for free and open access by the Revistas científicas at Ciencia Unisalle. It has been
accepted for inclusion in Ciencia y Tecnología para la Salud Visual y Ocular by an authorized editor of Ciencia
Unisalle. For more information, please contact ciencia@lasalle.edu.co.
https://doi.org/10.19052/sv.vol20.iss1.1
Editorial
cien tecnol salud vis ocul / vol. 20, n.º 1 / enero-junio del 2022 / pp. 7-9 / issn: 1692-8415 / issn-e: 2389-8801
8 un 43 % en la identificación de las placas de prueba de Ishihara por parte de
los pacientes que los usaron (5).
Editorial
En esas páginas, se muestran solo algunos de los estudios cuyos resultados evi
dencian ciertas aplicaciones de la impresión 3D en optometría, que facilita
la producción de objetos únicos a bajo costo, permitiendo asimismo generar
soluciones personalizadas para los pacientes. Dadas las posibilidades de esa tec
nología, es imperativo continuar y mejorar la calidad de vida de los pacientes.
REFERENCIAS
1. Lee L, Burnett AM, Panos JG, Paudel P, Keys D, Ansari HM, et al. 3-D printed spec
tacles: potential, challenges and the future. Clin Exper Opto. 2020;103(5): 590-596.
Disponible en: https://doi.org/10.1111/cxo.13042
2. Sommer AC, Blumenthal EZ. Implementations of 3D printing in ophthalmology. Graefes
Arch Clin Exp Ophthalmol. 2019;257: 1815–1822. Disponible en: https://doi.org/10.1007/
s00417-019-04312-3
3. Alam F, Elsherif M, AlQattan B, Salih A, Lee SM, Yetisen AK, et al. Butt ACS. Biom Sci
Eng. 2021; 7(2): 794-803. Disponible en: https://doi.org/10.1021/acsbiomaterials.0c01470
cien tecnol salud vis ocul / vol. 20, n.º 1 / enero-junio del 2022 / pp. 7-9 / issn: 1692-8415 / issn-e: 2389-8801
4. Zhao F, Wang J, Wang L, Chen L. An approach for simulating the fitting of rigid gas- 9
permeable contact lenses using 3D printing technology. Cont Lens Ant E. 2019;42(2):
165-169. Disponible en: https://doi.org/10.1016/j.clae.2018.10.003
Editorial
5. Alam F, Salih AE, Elsherif M, Yetisen AK, Butt H. 3D printed contact lenses for the
management of color blindness. Additive Manufacturing. 2022;49: 102464. Disponible
en: https://doi.org/10.1016/j.addma.2021.102464
6. Ayyildiz O. Customised spectacles using 3-D printing technology. Clin Experi Opt.
2018;101(6): 747-751. Disponible en: https://doi.org/10.1111/cxo.12795
7. Alam MS, Sugavaneswaran M, Arumaikkannu G, Mukherjee B. An innovative method
of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology: A pilot
study. Orbit. 201736(4): 223-227. Disponible en: https://doi.org/10.1080/01676830.20
17.1287741
8. Hopkins GR, Irvin BC. Optometric Applications for Three-dimensional Printing: A
Technical Report from Low Vision Rehabilitation Practice. Optom Vis Sci. 2019;96(3):
213-220. Disponible en: https://doi.org/10.1097/OPX.0000000000001349
9. Xie P, Hu Z, Zhang X, Li X, Gao Z, Yuan D, et al. (2014) Application of 3-Dimensional
Printing Technology to Construct an Eye Model for Fundus Viewing Study. PLoS ONE
9(11): e109373. Disponible en: https://doi.org/10.1371/journal.pone.0109373
10. AbouHashem Y, Dayal M, Savanah S, Štrkalj G. The application of 3D printing in
anatomy education. Med Educ Online. 2015;16(20): 29847. Disponible en: https://doi.
org/10.3402/meo.v20.29847
cien tecnol salud vis ocul / vol. 20, n.º 1 / enero-junio del 2022 / pp. 7-9 / issn: 1692-8415 / issn-e: 2389-8801
10
Editorial
cien tecnol salud vis ocul / vol. 20, n.º 1 / enero-junio del 2022 / pp. 7-9 / issn: 1692-8415 / issn-e: 2389-8801