Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Mayo, 2006
PASOLINK NEO
SISTEMA DE RADIO DIGITAL PDH/SDH 6-52 GHZ
Sección IV APENDICE
Aplicación y Ajuste de la Interfáz LAN (LAN INTERFACE)
(10/100BASE-T(X))
CONTENIDO
TITULO PAGINA
1. BOSQUEJO........................................................................................................ A-1
CL-1
CONTENIDO ROI-S05872
TITULO PAGINA
6. MANTENIMIENTO/Control.............................................................................. A-34
6.1 Restauración Remota (Restauración del Dispositivo LAN) ...................... A-34
CL-2
2 páginas
PASOLINK NEO ROI-S05872
APENDICE
1. BOSQUEJO
PABX
PASOLINK NEO TEL
FAX
nE1/E3
nE1/E3
DATA
10/100BASE-T(X)
10/100BASE-T(X)
Router TV
Router CONF
LAN
IP
DATA Phone
BOSQUEJO
A-1
ROI-S05872 PASOLINK NEO
APENDICE
Módulo Caracteristicas
H2980A 16E1 INTFC • Máxima capacidad de rendimiendo de LAN, 64 kbps - 80 Mbps
• 10BASE-T/100BASE-TX x 2 puertos
• Auto Negociación / Auto MDI/MDIX, efectiva
• Tabla de 1024 Direcciones MAC, aprendiendo y envejeciendo automáticamente.
• Máximo tamaño de la trama 1548 bytes
• Cumple con la IEEE 802.3x, la Pausa del Control del Flujo de la Trama, efectiva (Full Duplex)
• Half Duplex Back Pressure, efectiva
• Función Link Loss Forwarding (LLF)
• Función RMON
Proporciona hasta dos (2) canales E3, el interfáz de hasta ocho (8) canales WS
(equivalente al ancho de banda E1 por canal) y dos (2) puertos de interfáz 10Base-T/
100Base-TX. LAN con capacidades máximas se pueden ajustadas desde 64 kbps a 16
Mbps.
Módulo Caracteristicas
H3010A E3 INTFC • Máxima capacidad de rendimiendo de LAN, 64 kbps - 16 Mbps
• 10BASE-T/100BASE-TX x 2 puertos
• Auto Negociación / Auto MDI/MDIX, efectiva
• Tabla de 1024 Direcciones MAC, aprendiendo y envejeciendo automáticamente.
• Máximo tamaño de la trama 1548 bytes
• Cumple con la IEEE 802.3x, la Pausa del Control del Flujo de la Trama, efectiva (Full Duplex)
• Half Duplex Back Pressure, efectiva
• Función Link Loss Forwarding (LLF)
• Función RMON
Módulo Caracteristicas
Módulo H3020A 4P • Máxima capacidad de rendimiendo de LAN, 2 Mbps - 100 Mbps
LAN INTFC • 10BASE-T/100BASE-TX x 4 puertos
• Auto Negociación / Auto MDI/MDIX, efectiva
• Tabla de 1024 Direcciones MAC, aprendiendo y envejeciendo automáticamente.
• Máximo tamaño de la trama 1548 bytes
• Cumple con la IEEE 802.3x, la Pausa del Control del Flujo de la Trama, efectiva (Full Duplex)
• Half Duplex Back Pressure, efectiva
• Función Link Loss Forwarding (LLF)
• Función RMON
Módulo Caracteristicas
H2965A LAN/WS • Máxima capacidad de rendimiendo de LAN
INTFC Slot1 : 50 Mbps - 100 Mbps (Port1 + Port2; Máxima 150 Mbps)
Slot2 : 64 kbps - 2 Mbps
• 10BASE-T/100BASE-TX x 2 puertos
• Auto Negociación / Auto MDI/MDIX, efectiva
• Tabla de 1024 Direcciones MAC, aprendiendo y envejeciendo automáticamente.
• Máximo tamaño de la trama 1548 bytes
• Cumple con la IEEE 802.3x, la Pausa del Control del Flujo de la Trama, efectiva (Full Duplex)
• Half Duplex Back Pressure, efectiva
• Función Link Loss Forwarding (LLF)
• Función RMON
3. EJEMPLO DE APLICACION
Modo
Módulo (1) (2) (3) (4) (5)
Guaranteed Switching Data Best E1 Network
Bandwidth HUB Distribution Effort Connection
(a) 16E1 INTFC √ √ √ — √
(b) E3 INTFC — √ √ — √
(c) 4P LAN INTFC √ √ √ — —
(d) LAN/WS INTFC √ √ √ √ √
Los dos (2) puertos se separan totalmente y el máximo rendimiento garantizado para cada
puerto.
Customer-A
(Port 2) (Port 2)
EJEMPLO DE APLICACION
A-4
PASOLINK NEO ROI-S05872
APENDICE
Entre los sitios distantes estos están conectados con la configuración HUB de
conmutación.
User-1 User-3
(Port 1) (Port 1)
Data Server
User-1
(Port 1) (Port 1)
EJEMPLO DE APLICACION
A-5
ROI-S05872 PASOLINK NEO
APENDICE
Los dos (2) puertos son separados y la señal de banda se comparte de acuerdo con la
cantidad de trafico de cada puerto.
Customer-A
(Port 2) (Port 2)
E1 Network
EJEMPLO DE APLICACION
A-6
PASOLINK NEO ROI-S05872
APENDICE
El ajuste de LAN INTFC es realizado con el LCT, PNMT ó PNMS. Los ítemes del menú en el
LCT son como sigue.
Provisioning
LAN Port Setting
Switching Function 4-3
2M Framing 4-4
Port Usage 4-5
Speed & Duplex 4-6
Flow Control 4-7
Collision Report 4-8
Link Loss Forwarding 4-9
Para el ajuste de la Capacidad de la LAN 2Port y de 2M, es necesario ajustar al mismo modo
entre los equipos locales y opuestos.
El ancho de banda de la transmisión se selecciona desde 64 kbps, 128 kbps y de 256 kbps.
Dependiendo de la selección de la capacidad de la señal LAN, la interfáz V.11/RS-232C
para usar la SC1/SC2/SC3/SC4 no puede ser usada.
(2) E3 INTFC
* Solamente dominios de las señales auxiliares de la señal son asignables para la señal
LAN.
b. Dominio de la Señal Wayside (WS)
El ancho de banda de la transmisión es seleccionado desde 64 kbps, 128 kbps y 256 kbps.
Dependiendo de la selección del ancho de banda de la transmisión, la interfáz V.11/RS-
232C a usar SC1/SC2/SC3/SC4 no pueden ser usados.
Cuando la LAN/WS INTFC está equipada en el Slot2, esta puede ser seleccionada. El
ancho de banda de la transmisión es 2 Mbps. Un canal WS (E1) no puede ser usado.
El ancho de banda de la transmisión se selecciona desde 64 kbps, 128 kbps y 256 kbps.
Dependiendo de la selección del ancho de banda de transmisión, la interfáz V.11/RS-232C
a usar SC1/SC2/SC3/SC4 no puede ser usada.
Hay dos modos del Uso del Puerto LAN; los puertos plurales comparten el dominio de la señal
en una sección de radio (Modo Compartido - Shared Mode) y el dominio independientemente
separados se asegura para cada puerto (Modo Separado - Separated Mode).
a. Port1-2 Shared
ST-A ST-B
A A B
PORT1 PORT1
A B
B A B
PORT2 PORT2
b. Port1-4 Shared
ST-A ST-B
A A B C D
PORT1 PORT1
B A B C D
PORT2 PORT2
A B C D
C
PORT3 A B C D
PORT3
D
PORT4 A B C D
PORT4
ST-A ST-B
A A B
PORT1 PORT1
A B
B A B
PORT2 PORT2
C C D
PORT3 PORT3
C D
D C D
PORT4 PORT4
Se permite que las señales pasen a trave's entre los puertos locales. Cuando el modo
compartido es ajustado, se recomienda usar el modo de conmutación junto.
ST-A ST-B
A A B
PORT1 PORT1
B
A B
B A B
PORT2 PORT2
A
a. Port1-2 Separated
ST-A ST-B
A A A
PORT1 PORT1
B B B
PORT2 PORT2
b. Port1-4 Separated
ST-A ST-B
A A A
PORT1 PORT1
B B B
PORT2 PORT2
C C C
PORT3 PORT3
D D D
PORT4 PORT4
(2) E3 INTFC
El ancho de banda seleccionable y el dominio de la señal compartida de la señal LAN son dados
en la siguiente tabla. Los códigos son usados para la Configuración del Sistema - System
Configuration y la Asignación del Canal - Channel Assignment en la tabla, refiérase a la Tabla
a. y la Tabla b.
Código Descripción
E1 2.048 Mbps (E1) Data
E3 34.368 Mbps (E3) Data
L1 LAN Port1
L2 LAN Port2
L3 LAN Port3
L4 LAN Port4
L LAN (Shared)
S V.11/RS-232C Data
/ Not Assignable
APENDICE
ROI-S05872
Capacidad de Transmisión: 40 Mbps
System LAN Capacity Channel Assignment
Configuration [bps] Main Traffic SC
Port1 Port2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4
Not Used ⎯ ⎯ E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 / / / / S S S S
[A-1] 8M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L S S S S
10M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L S S S S
12M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L S S S S
14M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L S S S S
16M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L S S S S
18M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L S S S S
20M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L S S S S
22M E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L S S S S
24M E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L S S S S
26M E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L S S S S
28M E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L S S S S
30M E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L S S S S
32M E1 E1 E1 E1 L L L L L L L L L L L L L L L L S S S S
34M E1 E1 E1 L L L L L L L L L L L L L L L L L S S S S
36M E1 E1 L L L L L L L L L L L L L L L L L L S S S S
38M E1 L L L L L L L L L L L L L L L L L L L S S S S
40M L L L L L L L L L L L L L L L L L L L L S S S S
[A-2] 4M 4M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L2 L2 L1 L1 S S S S
10M 10M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 S S S S
20M 20M L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 S S S S
PASOLINK NEO
PASOLINK NEO
Capacidad de Transmisión: 80 Mbps
System LAN Capacity Channel Assignment
Configuration [bps] Main Traffic SC
PORT1 PORT2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 2 3 4
Not Used ⎯ ⎯ E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 / / / / / / / / / / / / / / / / / / / / / / / / / / / /
[A-1] 48M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L S S S S
50M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
52M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
54M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
56M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
58M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
60M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
62M E1 E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
64M E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
66M E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
68M E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
70M E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
72M E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
74M E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
76M E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
78M E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
80M L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L S S S S
[A-2] 24M 24M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 S S S S
30M 30M E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 S S S S
40M 40M L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 S S S S
AJUSTE DEL MODULO
ROI-S05872
APENDICE
A-17
ROI-S05872 PASOLINK NEO
APENDICE
(2) E3 INTFC
APENDICE
ROI-S05872
Capacidad de Transmisión: 80 Mbps
System LAN Capacity Channel Assignment
Configuration [bps] Main Traffic
PORT1 PORT2 PORT3 PORT4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Not Used ⎯ ⎯ ⎯ ⎯ E1 E1 E1 E1 E1 E1 E1 E1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
[B-1] 64M E1 E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
66M E1 E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
68M E1 E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
70M E1 E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
72M E1 E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
74M E1 E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
76M E1 E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
78M E1 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
80M L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
[B-2] 32M 32M E1 E1 E1 E1 E1 E1 E1 E1 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1
40M 40M L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1
[B-3] 16M 16M 16M 16M E1 E1 E1 E1 E1 E1 E1 E1 L4 L4 L4 L4 L4 L4 L4 L4 L3 L3 L3 L3 L3 L3 L3 L3 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1
20M 20M 20M 20M L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L2 L2 L2 L2 L2 L2 L2 L2 L2 L2 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1
PASOLINK NEO
PASOLINK NEO ROI-S05872
APENDICE
Slot2
System LAN Capacity [bps] Channel Assignment
Configuration Wayside SC (64K×4)
(2Mbps)
PORT1 PORT2 1 2 3 4
Not Used ⎯ ⎯ E1 S S S S
[D-1] 2M L S S S S
[C-1] 64k E1 L S S S
128k E1 L L S S
256k E1 L L L L
[Ajuste 2M Framing]
[Provisioning]→[LAN Port Setup]→[2M Framing]
Unframed
32 x 8 bit time slots (125 μsec)
Multliframe
(16 frames)
Payload
15
PCM31/PCM31C
32 x 8 bit time slots (125 μsec)
0 TS0
TS0
Mutliframe Payload
(16 frames)
15 TS0
Frame/CRC
PCM30/PCM30C
32 x 8 bit time slots (125 μsec)
0 TS0 TS16
TS0 TS16
15 TS0 TS16
Frame/CRC CAS
Según el modo de ajuste del puerto del equipo conectado, se realiza el ajuste del puerto
LAN. Los ajustes del puerto aceptable son como sigue.
Equipo Externo
Auto 10BASE-T/ 10BASE-T/ 100BASE-TX/ 100BASE-TX /
Negotiation Half Duplex Full-Duplex Half-Duplex Full-Duplex
Auto Negotiation
√ √ ⎯ √ ⎯
(Auto MDI/MDIX)
10BASE-T/
√ √ ⎯ ⎯ ⎯
Half Duplex
10BASE-T/
Port Setting ⎯ ⎯ √ ⎯ ⎯
Full-Duplex
100BASE-TX/
√ ⎯ ⎯ √ ⎯
Half-Duplex
100BASE-TX /
⎯ ⎯ ⎯ ⎯ √
Full-Duplex
√: Effective ⎯ : Invalid
Cuando se aplica la Auto Negociación - Auto Negotiation, funciona con el MDI Auto ó
MDIX. Puede ser seleccionado MDI ó MDIX por el modo de ajuste manual.
[Flow Control]
[Provisioning]→[LAN Port Setup]→[Flow Control]
[Collision Report]
[Provisioning]→[LAN Port Setup]→[Collision Report]
* Cuando la alarma LOF/High BER ocurre en una sección de radio, sin importar el
ajuste de arriba, el enlace es obligatoriamente liberado.
* Cuando el ajuste del Puerto de Conmutación - Port Switching es ajustado a Enabled,
esta función no es operada.
La función proporciona el control para liberar el enlace en ambos terminales cuando falla de
la sección de radio ó falla del enlace del puerto LAN ocurre.
a. Control de la Liberación Obligatoriamente del Enlace por Falla del Canal de Radio
Cuando falla de la sección de radio ocurre, el enlace del puerto es liberado
obligatoriamente para ambos terminales extremos. Esta función opera sin importar el
ajuste de arriba de la función de Pérdida Hacia Adelante - Loss Forwarding.
Radio
[ST-A] [ST-B]
(local) (opposite)
Ethernet Ethernet
b. Control de la Liberación Obligatoriamente del Enlace por Falla del Enlace Opuesto
Cuando la función La Pérdida del Enlace Hacia Adelante - Link Loss Forwarding es
ajustada a Enabled, el enlace local es liberado obligatoriamente detectando la falla del
enlace de la estación opuesta.
Radio
[ST-A] [ST-B]
(local) (opposite)
Ethernet Ethernet
⎪
+ Alarm/Status ············································ Capítulo 5.2
⎪ ⎪
⎪ + LAN Link
⎪ + LAN Collision
⎪ + Link Loss Forwarding (LLF)
⎪ + Speed & Duplex
⎪
+ PMON (Current) ············································ Capítulo 5.3
⎪ ⎪
⎪ + RMON(Line)(15min)
⎪ + RMON(Line)(1day)
⎪ + RMON(DMR)(15min)
⎪ + RMON(DMR)(1day)
⎪
+ PMON (History)
⎪
+ RMON(Line)(24H/15min)
+ RMON(Line)(7days/day)
+ RMON(DMR)(24H/15min)
+ RMON(DMR)(7days/day)
ALM
2M IN/OUT-A 2M IN/OUT-B
100M PORT 1 PORT 2 100M
E3 CH1 E3 CH2
ALM
IN OUT IN OUT WS IN/OUT 100M PORT 1 PORT 2 100M
ALM
WS IN/OUT
100M PORT 1 PORT 2 100M
ALM
2M IN/OUT-A
100M PORT 1 PORT 2 100M 100M PORT 3 PORT 4 100M
*1 Refiérase al Capítulo 4.9 Pérdida del Enlace Hacia Adelante para liberación
obligatoria del enlace.
Objetivo
No. Item de Estadística Descripción
Línea DMR
1 Rx Unicast √ √ Número total de tramas recibidas dirigidas para unicast.
2 Rx Broadcast √ √ Número total de tramas recibidas dirigidas para broadcast.
3 Rx Multicast √ √ Número total de tramas recibidas dirigidas para multicast.
4 Rx Pause √ √ Número total de tramas recibidas de PAUSE.
5 Rx CRC Error √ √ Número total de tramas recibidas de error de FCS detectado.
6 Rx Alignment Error √ — Número total de tramas recibidas de error de alineación.
7 Rx Symbol Error √ — Número total de tramas recibidas de error de símbolo.
8 Rx Undersize √ √ Número total de tramas recibidas excluyendo tramas erradas
por tramas de menos de 63 bytes de longitud.
9 Rx Fragments √ √ Número total de tramas recibidas incluyendo tramas erradas por
tramas de menos de 63 bytes de longitud.
10 Rx 64 √ √ Número total de tramas recibidas de tramas de 63 bytes de
longitud.
11 Rx 65 to 127 √ √ Número total de tramas recibidas desde tramas de longitud de
65 bytes a 127 bytes.
12 Rx 128 to 255 √ √ Número total de tramas recibidas desde tramas de longitud de
128 bytes a 255 bytes.
13 Rx 256 to 511 √ √ Número total de tramas recibidas desde tramas de longitud de
256 bytes a 511 bytes.
14 Rx 512 to 1023 √ √ Número total de tramas recibidas desde tramas de longitud de
512 bytes a 1023 bytes.
15 Rx 1024 to 1536 √ √ Número total de tramas recibidas desde tramas de longitud de
1024 bytes a 1536 bytes.
16 Rx 1537 to Max Size √ √ Número total de tramas recibidas excluyendo tramas erradas
desde tramas de longitud de 1537 bytes a 1916 bytes.
17 Rx Jabbers √ √ Número total de tramas recibidas incluyendo tramas erradas
que exceden la trama de longitud de 1537 bytes.
18 Tx Unicast √ √ Número total de tramas transmitidas dirigidas para unicast.
19 Tx Broadcast √ √ Número total de tramas transmitidas dirigidas para broadcast.
20 Tx Multicast √ √ Número total de tramas transmitidas dirigidas para multicast.
21 Tx Pause √ √ Número total de tramas transmitidas de PAUSE.
22 Tx Total Collision √ — Número total de colisiones ocurridas.
6. MANTENIMIENTO/Control
⎪
+ Maintenance
⎪
+ Maintenance1
⎪ ⎪
⎪ + LAN Device Reset ············································ Capítulo 6.1
MANTENIMIENTO/Control
A-34
E