Documentos de Académico
Documentos de Profesional
Documentos de Cultura
FECHA FEBRERO DEL 2021 DISEÑO: ING RENZO ABEL ZEVALLOS BENAVENTE
P= 1.00 t Sobrecarga
q= 0.50 t/m
SUELO 2
SUELO 1
h3= 0.70
a1= 1.65 a2= 0.00 a3= 0.20 a4= 0.00 a5= 0.00
h1= 0.40
Punta Talon
This document was created by an application that isn’t licensed to use novaPDF.
Purchase a license to generate PDF files without this notice.
Acero Vertical Acero Horizontal
As flex Asmin As dis int As int As Ext As min As Int As ext
cm2 ρmin= 0.0015 cm2 φ φ ρmin= 0.0025 As min*(1/3) Varilla φ As min*(2/3) Varilla φ
3/8 3/8 3/8 3/8
(h2-h1)/3 0.40 3.00 3.00 @ 23.67 cm @ 23.67 cm 5.00 1.67 @ 42.60 cm 3.33 @ 21.30 cm
@ 20.00 cm @ 20.00 cm @ 35.00 cm @ 20.00 cm
3/8 3/8 3/8 3/8
(h2-h1)*2/3 2.38 3.00 3.00 @ 23.67 cm @ 23.67 cm 5.00 1.67 @ 42.60 cm 3.33 @ 21.30 cm
@ 20.00 cm @ 20.00 cm @ 35.00 cm @ 20.00 cm
3/8 3/8 3/8 3/8
(h2-h1) 7.42 3.00 7.42
@ 9.57 cm @ 23.67 cm 5.00 1.67 @ 42.60 cm 3.33 @ 21.30 cm
@ 10.00 cm @ 15.00 cm @ 35.00 cm @ 15.00 cm
@ 20.00 cm
DISEÑO DE LA PANTALLA POR CORTANTE
altura espesor (t) d Fuerza 1.7*F Vc Vc > 1.7*F
Descripcion m cm cm t t t
(h2-h1)/3 0.93 20.00 14.00 0.18
0.93 20.00 14.00 0.14 0.56 9.14 OK
(h2-h1)*2/3 1.87 20.00 14.00 0.73
1.87 20.00 14.00 0.29 1.73 9.14 OK
(h2-h1) 2.80 20.00 14.00 1.65
2.80 20.00 14.00 0.43 3.54 9.14 OK
DISEÑO DE LA PUNTA Y EL TALON POR FLEXION
Espesor (t) Mto Q Mto (S+Pp) Mto s/c 1.7*Mto d As
Descripcion
cm t-m t-m t-m Kg-cm cm cm2
Punta 40.00
40.00 7.20 1.31 0.00 1,002,066.81 34.00 9.75
Talon 40.00
40.00 0.00 - 0.00 - 34.00 -
As Longitudinal As Transversal
Descripcion
a As flexion ρmin=0.0015 As Varilla φ ρmin=0.0025 Varilla φ
cm cm2 cm2 Diseño
Punta 5/8 5/8
2.2932 8.06909 6.00 cm2 8.07 cm2 @ 24.54 cm 10.00 cm2 @ 19.80 cm
@ 30.00 cm @ 20.00 cm
Talon 5/8 5/8
- 0.00000 6.00 cm2 6.00 cm2 @ 33.00 cm 10.00 cm2 @ 19.80 cm
@ 30.00 cm @ 20.00 cm
Cortantes en Punta y Talon
espesor d VQ V (S+Pp) V s/c 1.7 V Vc Vc > 1.7*V
Descripcion
cm cm2 t t t t t
Punta 40.00 34.00 4.58 7.79 22.20 OK
Talon 40.00 34.00 0.00 0 0.00 - 22.20 OK
Por Suelo Por s/c Suelo+s/c Momento Resistente
h
F M x M Mto Ult As a d
m t t-m t t-m t-m cm2 cm cm
0 - - 0.15 - - 3.55 0.84 14.00
0.25 0.11 0.00 0.15 0.00 0.01 3.55 0.84 14.00
0.5 0.21 0.01 0.15 0.02 0.05 3.55 0.84 14.00
0.75 0.32 0.03 0.15 0.04 0.12 3.55 0.84 14.00
1 0.42 0.07 0.15 0.08 0.25 3.55 0.84 14.00
1.25 0.53 0.14 0.15 0.12 0.44 3.55 0.84 14.00
1.5 0.63 0.24 0.15 0.17 0.70 3.55 0.84 14.00
1.75 0.74 0.38 0.15 0.24 1.04 3.55 0.84 14.00
2 0.84 0.56 0.15 0.31 1.48 3.55 0.84 14.00
2.25 0.95 0.80 0.15 0.39 2.02 3.55 0.84 14.00
2.5 1.05 1.10 0.15 0.48 2.68 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
- - 0.15 - - 3.55 0.84 14.00
Altura de corte d Redondeo
- 0.50 1.00 1.50 2.00 2.50 3.00 Mto
0.5 0.14 0.64 0.75 m
0 resistente
t-m
1.82
0.5 1.82
1.82
1.82
1.82
1 1.82
φ 1.82
3/8 1.82
1.5 @ 20.00 cm 1.82
1.82
1.82
1.82
2 φ φ 1.82
3/8 3/8 1.82
@ 10.00 cm @ 10.00 cm 1.82
2.5 1.82
1.82
Mto resistente
1.82
Mto Ult 1.82
This document was created by an application that isn’t licensed to use novaPDF.
Purchase a license to generate PDF files without this notice.