Documentos de Académico
Documentos de Profesional
Documentos de Cultura
EJERCICIO 2
Daniel González Puntos.
The following figure shows an L-shaped bracket made of structural steel with
Young’s modulus E = 200 GPa and Poisson’s ratio ν = 0.3. The 4 cm thick L-shape
with the cross-sectional profile shown in the figure is rigidly connected to a
rectangular base of size 3 cm × 8 cm × 1 cm. The bracket is fixed on the right end
at the base. A surface pressure of 10 MPa is exerted on the left end as shown below.
(1) Determine if static failure or buckling failure occurs in the bracket.
(2) Find the life of the bracket if it is subjected to a fully reversed cyclic pressure of
magnitude 10 MPa on the left end.
4.- Determine the pressure and velocity distributions of the flow of water inside the
following circular chamber. The chamber has a depth of 2 m. Assume nonslip
boundary conditions at the walls. The velocity of water at the inlets is 10 cm/s, and
the outlets are at atmospheric pressure.
4.- Determine las distribuciones de presión y velocidad del flujo de agua dentro del
siguiente cámara circular. La cámara tiene una profundidad de 2 m. Suponga
antideslizante condiciones de contorno en las paredes. La velocidad del agua en
las entradas es de 10 cm / s, y las salidas están a presión atmosférica
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.
EXAMEN 2
EJERCICIO 4
Daniel González Puntos.