Documentos de Académico
Documentos de Profesional
Documentos de Cultura
REFERENCIAS
Abrahamson, N.A. y Silva W.J. (1997). “Empirical response spectral attenuation relations for
shallow crustal earthquakes”, Seismological Research Letters 68, 94-127.
Arboleda J. y Ordaz M. (1993). “Un mejor uso de los datos estadísticos para estimación de la
sismicidad local”, Memorias del X Congreso Nacional de Ingeniería Sísmica, 21-27,
Puerto Vallarta, México.
Cornell, C.A. (1968). “Engineering Seismic Risk Analysis”, Bulletin of the Seismological Society
of America, 63, 9-48.
Cornell, C.A. y Vanmarcke E. (1969). “The major influences on seismic risk”, Proceedings 4th
World Conference on Earthquake Engineering, Santiago de Chile.
Der Kiureghian, A. y Neuenhofer A. (1991), “A response spectrum method for multiple support
seismic excitations”, Earthquake Engineering Research Center, UCB/EERC-91/08.
Esteva, L. (1967). “Criterios para la construcción de espectros para diseño sísmico”, 3er
Simposio Panamericano de Estructuras, Caracas, Venezuela.
Esteva, L. (1970), Regionalización sísmica de México para fines de ingeniería, Serie Azul de
Instituto de Ingeniería, 246.
García, D., Singh, S.K., Herráiz, M., Ordaz, M. y Pacheco, J. (2005). “Inslab earthquakes of
Central Mexico: peak ground-motion parameters and response spectra”, Bull. Seism.
Soc. Am., 95, 2272-2282.
Hardin, B.O. y Drnevich V.P. (1972). "Shear Modulus and Damping in Soils -II. Design
Equations and Curves," Journal of the Soil Mechanics and Foundations Division, ASCE,
Vol. 98, No. SM7, July, 1972, pp. 667-692.
Jaime, A. (1987). “Características dinámicas de las arcillas del Valle de México”, Tesis Doctoral,
Facultad de Ingeniería, UNAM.
Joyner W.B. (1984). “A scaling law for the spectra of large earthquakes”, Bulletin of the
Seismological Society of America, 74, 1167-1188.
2
REFERENCIAS
Meli R (1976), “Bases para los criterios de diseño estructural del nuevo Reglamento de
Construcciones para el Distrito Federal”, Serie Azul 375, Instituto de Ingeniería,
Universidad Nacional Autónoma de México, México D.F
MDOC-DS (1993). “Manual de Diseño de Obras Civiles de CFE: Diseño por sismo”, Comisión
Federal de Electricidad – Instituto de Investigaciones Eléctricas.
Normas Técnicas Complementarias para Diseño por Sismo (1995), Diario Oficial del Gobierno
del Distrito Federal.
Normas Técnicas Complementarias para Diseño por Sismo (2004), Diario Oficial del Gobierno
del Distrito Federal.
Ordaz M., Jara J.M. y Singh S.K. (1989). "Riesgo sísmico y espectros de diseño en el estado de
Guerrero". Informe conjunto del II-UNAM y el Centro de Investigación Sísmica AC de la
Fundación Javier Barros Sierra al Gobierno del estado de Guerrero, Instituto de
Ingeniería, UNAM, proyectos 8782 y 9745, México.
Ordaz, M., Arboleda J. y Singh S. K. (1993). “Un nuevo método para simular acelerogramas
sintéticos usando registros de sismos pequeños como funciones de Green empíricas”,
X Congreso Nacional de Ingeniería Sísmica, 28-35, Pto Vallarta, Jalisco, México.
Pardo, M. y Suárez G. (1993). “Steep subduction geometry of the Rivera plate beneath the
Jalisco block in the western Mexico”, Geophys. Res. Lett., 20, 2391-2394.
Pardo, M. y Suárez G. (1994). “Shape of the subducted Rivera and Cocos plates in southern
Mexico: seismic and tectonic implications”, J. Geophys. Res.
Park, Y. J. (1995), “New conversion method from response spectrum to PSD functions”, Journal
of Engineering Mechanics, 121,12, 1391-1392.
Pérez Pérez A y Ordaz Mario (2003). “Métodos existentes para el cálculo de funciones de
densidad espectral compatibles con espectros de diseño”, XIV Congreso Nacional de
Ingeniería Sísmica, II-12, Guanajuato-León, México.
Ponce, L., Gaulon R., Suárez G. y Loma E. (1992). “Geometry and state of stress of the
downgoing Cocos plate in the Isthmus of Tehuantepec, Mexico”, Geophys. Res. Lett.,
19, 773-776.
Reyes C. (1999). El estado límite de servicio en el diseño sísmico de edificios, tesis doctoral,
División de Estudios de Posgrado de la Facultad de Ingeniería, Universidad Nacional
Autónoma de México.
Rosenblueth, E. (1976), "Optimum design for infrequent disturbances", Jour Struct Div, ASCE,
102, 1807-1825.
3
REFERENCIAS
Rosenblueth E. (1986). “Optimum reliabilities and optimum design,” Structural Safety, Vol.2,
No.2, pp. 69-83.
Seed, H.B. e Idriss I.M. (1970). "Soil moduli and damping factors for dynamic response
analysis," Report EERC 70-10, University of California, Earthquake Engineering
Research Center, Berkeley, CA, 1970.
Singh, S.K., Astiz L. y Havskov J. (1981). “Seismic gaps and recurrence period of large
earthquake along the Mexican subduction zone: a reexamination”, Bull. Seism. Soc.
Am., 71, 827 843.
Singh, S.K., Ponce L. y Nishenko S.P. (1985a). “The great Jalisco, Mexico earthquake of 1932:
subduction of the Rivera plate”, Bull. Seism. Soc. Am., 75, 1301 1313.
Singh, S.K., Suárez G. y Domínguez T. (1985b). “The Oaxaca, Mexico earthquake of 1931:
lithospheric normal faulting in the subducted Cocos plate”, Nature, 317, 56 58.
Singh, S.K., Ordaz M., Anderson J.G., Rodríguez M., Quaas R., Mena E., Ottaviani M., y Almora
D. (1989). “Analysis of near-source strong motion recordings along the Mexican
subduction zone”, Bull. Seism. Soc. Am., 79, 1697-1717.
Singh, S.K. y Pardo M. (1993). “Geometry of the Benioff zone and state of stress in the
overriding plate in central Mexico”, Geophys. Res. Lett., 20, 1483-1486.
Suárez, G., Monfret T., Wittlinger G. y David C. (1990). “Geometry of subduction and depth of
the seismogenic zone in the Guerrero gap”, Nature, 345, 336-338.
White, R.A. (1984). “Catalog of historic seismicity in the vicinity of the Chixoy-Polochic and
Motagua faults, Guatemala”, U. S. Geological Survey Open-file Report, 84-88, 34 pp.
Zúñiga, R., Suárez G., Ordaz M. y García-Acosta V. (1997). “Peligro Sísmico en Latinoamérica y
el Caribe”. Capítulo 2: México. Reporte Final, IPGH.
4
REFERENCIAS
Arias, J. G., A. Vázquez y S. M. Alcocer (2004), “Respuesta dinámica de modelos a escala 1:2
de viviendas de mampostería confinada de uno y tres pisos, ensayados en mesa
vibradora”, XIV Congreso Nacional de Ingeniería Estructural, Acapulco, CDROM,
Artículo II-05, pp. 1-6, noviembre.
ASCE-7 (2005), “Minimum design loads for buildings and other structures”, ASCE Standard
ASCE/SEI 7-05, American Society of Civil Engineers, ISBN 0-7844-0809-2.
5
REFERENCIAS
Basu, D. y S. K. Jain (2004), “Seismic analysis of asymmetric buildings with flexible floor
diaphragms”, ASCE Journal of Structural Engineering, Vol. 130, No. 8, pp.1169-1176,
agosto.
Bazán, E. y R. Meli (1999), Diseño sísmico de edificios, segunda edición, Editorial Limusa.
Chandler, A.M. y G. Hutchinson (1987), “Evaluation of code torsional provisions by a time history
approach”, Earthquake Engineering and Structural Dynamics, Vol. 15, pp. 491-516.
Chandler, A. M. y X. N. Duan (1993), “A modified static procedure for the design of torsionally
unbalanced multistorey frame buildings”, Earthquake Engineering and Structural
Dynamics, Vol. 22, pp. 447-462.
Clough, R. W. and J. Penzien (1995), Dynamic of Structures, tercera edición, McGraw Hill.
6
REFERENCIAS
Damy, J. y S. M. Alcocer (1987), “Obtención del centro de torsión de edificios”, VII Congreso
Nacional de Ingeniería Sísmica, Querétaro, México, pp. C-60 a C-67.
Damy, J. (1988), “Comentarios al inciso 8.6 de las normas técnicas complementarias para
diseño por sismo”, Revista de Ingeniería Sísmica, SMIS, No. 33, mayo-agosto pp. 66-99.
De la Colina, J. (1999a), “Effects of torsion factors on simple non-linear systems using fully-
bidirectional analyses”, Earthquake Engineering and Structural Dynamics , Vol. 28, pp.
691-706.
Fajfar, P. (1992), “Equivalent ductility factors taking into account low-cycle fatigue”, Earthquake
Engineering and Structural Dynamics, Vol. 21, pp. 837-848.
FEMA-302 (1997), “NEHRP recommended provisions for seismic regulations for new buildings
and other structures. Part 1: Provisions”, FEMA Publication 302. Federal Emergency
Management Agency, Washington, DC.
7
REFERENCIAS
FEMA-368 (2001), “NEHRP recommended provisions for seismic regulations for new buildings
and other structures. Part 1: Provisions”, FEMA Publication 368, Federal Emergency
Management Agency, Washington, DC.
Gatica, G. (2007), “Importancia del diseño del sistema de piso en edificios con base en marcos
dúctiles diseñados conforme al reglamento del Distrito Federal”, Tesis de Maestría,
División de Estudios de Posgrado de la Facultad de Ingeniería, Universidad Nacional
Autónoma de México.
Godínez, E. y A. Tena (2007). “Evaluación de los criterios de diseño sísmico del RCDF para
marcos dúctiles de concreto reforzado con contravientos”, XVI Congreso Nacional de
Ingeniería Sísmica, Ixtapa, México.
IBC-2006 (2006), “International Building Code, 2000 to 2006 Editions”, International Code
Council, ISBN-13:978-1-58001-302-4.
Ju, S. C. y M. C. Lin (1999), “Comparison of building analyses assuming rigid or flexible floors”,
ASCE Journal of Structural Engineering, Vol. 126, No. 1, pp. 25–31, enero.
López, A. (2007), “Estudio de las limitantes por torsión impuestas al método simplificado de
análisis de estructuras de mampostería”, Tesis de Maestría, División de Ciencias
Básicas e Ingeniería, Universidad Autónoma Metropolitana Azcapotzalco, marzo.
8
REFERENCIAS
Luna, J. L. (2000), “Estudio de los criterios del RCDF-93 y sus normas técnicas
complementarias para el diseño sísmico de edificios regulares a base de marcos de
concreto”, Tesis de Maestría, División de Estudios de Posgrado de la Facultad de
Ingeniería, Universidad Nacional Autónoma de México, enero.
Luna, J. L. y A. Tena (2000), “Estudio de los criterios del RCDF para el diseño sísmico de
edificios regulares con base en marcos de concreto reforzado con baja ductilidad”, XII
Congreso Nacional de Ingeniería Estructural, León, CDROM, noviembre.
Menum, C. y A. Der Kiureghian (1998), “A replacement for the 30%, 40% and SRSS rules for
multicomponent seismic analysis”, Earthquake Spectra, Vol. 14, No. 1, pp. 153-163.
Miranda, E. (1991), “Seismic evaluation and upgrading of existing buildings”, Tesis Doctoral,
Universidad de California, Berkeley.
MDOC-93 (1993), “Manual de diseño de obras civiles. Diseño por sismo”, Instituto de
Investigaciones Eléctricas, Comisión Federal de Electricidad, México.
NTCS-1987 (1987), “Normas técnicas complementarias para diseño por sismo”, Gaceta Oficial
del Departamento del Distrito Federal, México, noviembre.
9
REFERENCIAS
NTCS-2004 (2004), “Normas técnicas complementarias para diseño por sismo”, Reglamento de
Construcciones para el Distrito Federal, Gaceta Oficial del Departamento del Distrito
Federal.
Ordaz, M., E. Miranda y J. Avilés (2003), “Propuesta de espectros de diseño por sismo para el
DF”, Revista Internacional de Ingeniería de Estructuras, Vol. 8, No. 2, pp. 189–207.
Paulay, T. (1996), “Seismic design of concrete structures the present need of societies”, 11th
World Conference on Earthquake Engineering, Acapulco, México, CDROM.
Ruiz, S. E. y R. Diederich (1989), “The seismic performance of buildings with weak first story”,
Earthquake Spectra, Vol. 5, No. 1, pp 89-102.
Tapia, E. (2005), “Estudio de los criterios del RCDF-2004 y sus Normas Técnicas
Complementarias para el Diseño sísmico de edificios regulares con base en marcos de
acero”, Tesis de Maestría, División de Estudios de Posgrado de la Facultad de
Ingeniería, Universidad Nacional Autónoma de México, abril.
10
REFERENCIAS
Tapia, E. y A. Tena (2005), “Respuesta inelástica de edificios con marcos dúctiles de acero con
contraventeo concéntrico diseñados conforme al RCDF-2004”, XV Congreso Nacional
de Ingeniería Sísmica, México, DF, CDROM, Artículo No. IX-02, pp. 1-18, septiembre.
Tapia, E. y A. Tena (2007), “Estudio del comportamiento de marcos dúctiles de acero con
contraventeo concéntrico en edificios regulares en zonas sísmicas”, XVI Congreso
Nacional de Ingeniería Sísmica, Ixtapa, México, noviembre.
Tena, A., E. del Valle, C. Gómez, M. Basurto, G. Casillas y C. Cheja (1996), “Revisión de los
factores de comportamiento sísmico para diseño por sismo de estructuras irregulares”,
Reporte FJBS/CIS-96/08, Centro de Investigación Sísmica, AC, Fundación Javier Barros
Sierra, diciembre.
Tena, A. (1997), “Revisión de los factores de comportamiento sísmico para el diseño por sismo
de estructuras esbeltas y/o con piso débil”, Reporte FJBS/CIS-97/03, Centro de
Investigación Sísmica, AC, Fundación Javier Barros Sierra, AC, octubre.
Tena, A. y H. Correa (2006), “Evaluación de los criterios del Apéndice A de las normas por
sismo para el diseño de marcos dúctiles de concreto reforzado”, XV Congreso Nacional
de Ingeniería Estructural, Puerto Vallarta, Jalisco, CDROM, pp. 1-28, noviembre.
11
REFERENCIAS
Tena, A. (2007), Análisis de estructuras con métodos matriciales, primera edición, editorial
Limusa, septiembre.
Tena-Colunga, A. (1999), “International seismic zone tabulation proposed by the 1997 UBC
code: Observations for Mexico”, Earthquake Spectra, Vol. 15, No. 2, pp. 331-360, mayo.
Tena-Colunga, A. (2003), “Dynamic response of buildings with soft first story designed according
to the seismic guidelines of a modern building code”, Response of Structures to Extreme
Loading XL-2003, Toronto, Canadá, Artículo No. 190 (15-06), CD-ROM, agosto.
Tena-Colunga, A. y J. Cano (2007), “Improvements for the simplified method for the seismic
analysis of masonry shear-wall structures advocated in Mexican codes”, Tenth North
American Masonry Conference (10NAMC), Saint Louis, Missouri, CD-ROM, junio.
Terán, A. y M. A. Espinoza (2003), “Resistencia de diseño para sistemas simples que exhiben
degradación de rigidez y resistencia”, XIV Congreso Nacional de Ingeniería Sísmica,
León-Guanajuato, CDROM, Artículo IV-07.
12
REFERENCIAS
Terán, A. y J. O. Jirsa (2003), “Un modelo simple para predecir la ocurrencia de fatiga de bajo
número de ciclos”, XIV Congreso Nacional de Ingeniería Sísmica, León-Guanajuato,
CDROM. Artículo IV-06.
Terán-Gilmore, A., H. Juárez y M. Frausto (2000), “On the dynamic response of regular
structures exhibiting tilt”, Earthquake Engineering and Structural Dynamics, Vol. 29, pp.
1343-1374.
UBC-97 (1997), “Uniform Building Code, 1997 edition”, International Conference of Building
Officials, Whittier, California, Vol. 2.
13
REFERENCIAS
Dobry R. y Gazetas G., (1988), “Simple Method for Dynamic Stiffness and Damping of Floating
Pile Groups”, Geotechnique 38, No 4
Gazetas G. (1983), “Analysis of machine foundation vibrations: state of the art”, Soil Dynamics
and Earthquake Engineering, Vol. 2, No. 1
Paz M (1980), Structural Dynamics: Theory and computation, Van Nostrand Reinhold Co.,
Nueva York.
Poulos, H G (1968), “Analysis of the settlement of pile group”, Geotechnique, Vol 18, pp.449-471
Wolf J. (1985), Dynamic Soil-Structure Interaction, Prentice Hall, Inc., Nueva Jersey.
Anónimo (1983), “Guide specifications for seismic design of highway bridges”, American
Association of State Highway and Transportation Officials.
Arias, A., Sánchez-Sesma F.J. y Ovando-Shelley E. (1981). “A simplified elastic model for
seismic analysis of earth-retaining structures with limited displacements”, International
Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil
Dynamics, Vol I, Missouri-Rolla, pp 235-240.
14
REFERENCIAS
Idriss, I.M., Lysmer J., Hwang R. y Seed H.B. (1973). “QUAD-4: a computer program for
evaluating the seismic response of soil structures by variable damping finite element
procedures”, Report No EERC 73-16, Earthquake Engineering Research Center,
University of California, Berkely.
Richardson, G. y Lee K. (1975). “Seismic design of reinforced earth walls”, Journal of the
Geotechnical Engineering Division, ASCE, Vol 101, No GT2.
Schnabel, P., Lysmer J. y Seed H.B. (1972). “SHAKE: a computer program for earthquake
response analysis of horizontally layer sites”. Report EERC 72-12, Earthquake
Engineering Research Center, University of California, Berkely.
Housner G. (1963), “The Dynamic Behavior of Water Tanks”, Bulletin of the Seismological
Society of America”, Vol. 53, No. 2.
Legatos N.., Ardahl J., Dhingra A., Gogate A., Hendrickson W., Kianoush M., Mrazek L.,
Achnobrich W. (2001), “Seismic Design of Liquid-Containing Concrete Structures (ACI
350.3-01) and Commentary (350.3R-01)”, American Concrete Institute.
AASHTO (2004). American Association of State Highway and Transportation Officials, “Standard
Specifications for Highway Bridges”, Washington, D.C., 474 pp.
15
REFERENCIAS
ACI-318 (2005). “Requisitos del reglamento para concreto estructural y comentarios”, Comité
ACI 318, American Concrete Institute, P.O. BOX 9094, Michigan, USA.
Álvarez J. J., Jara M., Macías E. y Aparicio A. C. (2005). “Evaluación de la respuesta sísmica de
un puente en arco de concreto”, XV Congreso Nacional de Ingeniería Sísmica, Art. XI-
08, México.
Caltrans (2004). California Department of Transportation, “Seismic Design Criteria”, Versión 1.3,
Sacramento, Califronia, 97 pp.
Der Kiureghian A. (1996). “A coherency model for spatially varying ground motions”, Earthquake
Engineering and Structural Dynamics, Vol. 25, No. 1, pp 99-111.
Des Roches R. y Fenves G. L. (2001). “Simplified Restrainer Design Procedure for Multiple-
Frame Bridges”, Earthquake Spectra, Vol. 17, Issue 4, pp 551-567.
FIB (2004). “State of the art report. Displacement based-seismic design of reinforced concrete
buildings”. Task Group 7.2. Bulletin 25, 196 pp.
Franchin P., Monti G. y Pinto P. E. (2001). “On the accuracy of simplified methods for the
analysis of isolated bridges”, Earthquake Engineering and Structural Dynamics, Vol. 30,
pp 363-382.
Jara M. y Casas J. R. (2002 b). “Criterios de diseño de puentes con aisladores y disipadores de
energía”. Monografías de Ingeniería Sísmica. Monografía CIMNE IS-49, 2002. Centro
Internacional de Métodos Numéricos, Universidad Politécnica de Cataluña, Barcelona,
España ISBN: 84-95999-02-1, 115 pp.
JRA (1996). Japan Road Association,“Specifications for Highway bridges, Part V: Seismic
Design”, Japón.
16
REFERENCIAS
Priestley M. J. N., Seible F. y Calvi G. M. (1996). “Seismic Design and Retrofit of Bridges”. John
Wiley & Sons, Inc., Estados Unidos de América, 686 pp.
Roesset J. M., Whitman R. V. y Dobry R. (1973). “Modal analysis for structures with foundation
interaction”. Journal of the Structural Division. Proceedings of the American Society of
Civil Engineers, 99(ST3), pp 399-416.
Ariman T. y Muleski G., (1981), “ A review of the response of buried pipelines Ander seismic
excitations”, Earthquake Engineering and Structural Dynamics, Vol. 9.
Blevins R. (1979), Formulas for Natural Frequency and Mode Shape, Van Nostrand Reinhold
Co., Neva York.
Japan Society of Civil Engineering (JSCE), (1988). “Earthquake Resistant Design for Civil
Engineering Structures in Japan”. Compiled by Earthquake Engineering Committee.
Japan
Kennedy, R.P., Chow, A.W. and Williamson, R.A., (1977), “Fault Movement Effects on Buried Oil
Pipeline”, Journal of the Transportation Engineering Division, ASCE, May, vol. 103, no.
TE5, pp. 617-633.
Newmark, N.M, Hall, W. (1967). “Pipeline design to resist large fault displacement”, Proceedings
of the 1975 U.S. National Conference on Earthquake Engineering, Ann Arbor,
Michigan.
17
REFERENCIAS
Rascon Octavio y Muñoz Celso. (1985) “Análisis sísmico de tuberías enterradas”, Series del
Instituto de Ingeniería de la UNAM, No. 494.
Singh M.(1975), “Generation of seismic floor spectra”, Journal of the Engineering Mechanics
Division, ASCE, Vol 1001, No.EM5
Wang, L. (1978), “Quasi-static analysis formulation for straight buried piping systems”,
Rensselaer Polytechnic Institute, EUA.
Bolt, B, A. (1993) Abridged Modified Mercalli Intensity Scale, Earthquake – Newly Revised and
Expanded, Appendix C, W. H. Freeman and Co.
Chopra A. K. (1988) Earthquake Response Analysis of Concrete Dams. Capítulo 15, Advanced
Dam Engineering for Design, Construction and Rehabilitation. Ed R. B. Jansen, Van
Nostrand Reinhold, New York.
Ghobarah, A, El-Nady, A y Aziz, T. (1994) Simplified Dynamic Analysis for Gravity Dams,
Journal of Structural Engineering, ASCE, vol. 120 no. 9, 2697/2716
Hung, T-K y Chen B-F (1990) Nonlinear Hydrodynamic Pressure on Dams, Journal of
Engineering Mechanics, Vol. 116, No. 6, 1372-1391
IMTA (2001) Geotecnia en Ingeniería de Presas, Instituto Mexicano de Tecnología del Agua.
Li, X., Romo, M. P. y Avilés, J. (1995) Finite Element Analysis of Dam-Reservoir Systems Using
An Exact Far-Boundary Condition, Computers & Structures, Vol. 60, No. 5, 751-762.
18
REFERENCIAS
Makdisi, F.I., & Seed, H.B., (1978). “Simplified Procedure for Estimating Dam and Embankment
Earthquake-Induced Deformations”. JGED, ASCE, Vol. 104, No. GT7
NRC (1985) Safety of Dams: Flood and Earthquake Criteria. Committee on Safety Criteria for
Dams, Water Science and Technology Board, National Research Council, National
Academy Press, Washington, D. C.
Priscu, R, Popovici A, Stematiu D y Stere C (1985) Earthquake Engineering for Large Dams,
Editura Academiei and John Wiley & Sons. 2nd revised edition, Chi
USACE (1995) Earthquake Design and Evaluation for Civil Works Projects, EM 1110-2-1806,
U.S. Army Corps of Engineers, Department of the Army, Washington, D. C.
USACE (1999) Response Spectra and Seismic Analysis for Concrete Hydraulic Structures, EM
1110-2-6050, U.S. Army Corps of Engineers, Department of the Army, Washington, D.
C.
AASHTO, (1999). “Guide Specifications for Seismic Isolation Design”. American Association of
State Highway and Transportation Officials, 2nd edition, Washington, D.C.
Aiken I. D., Kelly J. M., y Mahmoodi P., (1990), “The Application of viscoelastic dampers to
seismically resistant structures”, Proceedings of Fourth U.S. National Conference on
Earthquake Engineering, Palm Springs, California, 459-468.
Anderson T. L., (1990). “Seismic isolation design and construction practice”, Proceedings of
Fourth U .S. National Conference on Earthquake Engineering, Palm Springs, California,
519-528.
ATC-32., (1996). “Improved Seismic Design Criteria for California Bridges: Provisional
Recommendations”, Applied Technology Council, Redwood City, California.
19
REFERENCIAS
Bozzo L. M, Foti D. y López-Almansa F., (1996). “Design criteria for earthquake resistant
buildings with energy dissipators”, 11th World Conference on Earthquake Engineering,
Acapulco, México.
Bozzo L., Mahins S. y Zayas V., (1990). “Design of friction base isolation systems”, Proceedings
of Fourth U.S. National Conference on Earthquake Engineering, Palm Springs,
California, 549-557.
Constantinou M. C., (2003). “Damping systems for new and retrofit construction”, FIB
Symposium: Concrete Structures in Seismic Regions, Keynote Lecture K-3 (CD-ROM),
Athens, Greece.
Constantinou M. C., Tsopelas P. C., Kim Y.-S. and Okamoto S., (1993). “NCEER-TAISEI
Corporation Research Program on Sliding Seismic Isolation Systems for Bridges:
Experimental and Analytical Study of Friction Pendulum System (FPS)”, Report No.
NCEER-93-0020, National Center for Earthquake Engineering, State University of New
York at Buffalo, New York.
Dargush G. F. y Soong T. T., (1995). “Behavior of metallic plate dampers in seismic passive
energy dissipation systems”, Earthquake Spectra, Vol. 11, No. 4, 545-568.
Foti D., Bozzo L. M. y López-Almansa F., (1996). “Non-linear energy dissipation in buildings: A
comparative study” Proceedings of the Structural Dynamics Conference, EURODYN’96,
Italy, 569-574.
Gómez C., Rosenblueth E., y Jara J. M., (1993). “Estudio paramétrico de estructuras con
disipadores de energía”, Boletín del Centro de Investigación Sísmica, Fundación Javier
Barros Sierra, Vol. 3, No. 1.
Hanson R D., Aiken I. D., Nims D. K., Richeter P. J. y Bachean R. E., (1993). “State-of-art and
estate-of the practice in seismic energy dissipation”, Proceedings of the Seminar on
Seismic Isolation, Passive Energy Dissipation, and Active Control, Applied Technology
Council, 2, 449-471.
Hwang J.S. y Sheng L.H., (1993). “Effective Stiffness and Equivalent Damping on Base Isolated
Bridges”, Journal of Structural Engineering. Vol. 119, No. 10, 3094-3101.
Ishiyama Y. (1984). “Motions of rigid bodies and criteria for overturning by earthquake
excitations”, Bull. of the New Zealand Society of Earthquake Engineering, Vol. 17, No.
1, 24-37.
20
REFERENCIAS
Jara J. M., (1994). “Estado del arte sobre dispositivos para reducir daños provocados por
temblores”, Revista de ingeniería Sísmica, SMIS, México, 47, 35-79.
Jara M., Jara J. M. y Casas J. R., (2006). “Protección sísmica de estructuras con dispositivos de
control”, Ed. Morevallado.
Limón L. A. y Ruiz S. E., (1997). “Un ejemplo sobre dos alternativas de refuerzo: disipadores de
energía o contravientos”, Revista Internacional de Ingeniería de Estructuras, Vol. 2, No.
1, 75-91.
Lin W.–H., y Chopra A. K., (2002). “Earthquake response of elastic SDF systems with non–linear
fluid viscous dampers”, Earthquake Engineering and Structural Dynamics, Vol. 31, No.
9, 1623-1642.
Makris N., Constantinou M. C. y Dargush G. F., (1993). “Analytical model of viscoelastic fluid
dampers”, Journal of Structural Engineering, ASCE, No. 119, 3310-3325.
Pong W. S., Tsai C. S. y Lee G. C., (1994). “Seismic Study of Building Frames with Added
Energy-Absorbing Devices”, National Center for Earthquake, Engineering Research,
NCEER-94-0016, State University of New York, Buffalo.
Priestley M. J., Seible F. y Calvi G. M., (1996). “Seismic design and retrofit of bridges”, Wiley
Interscience, John Wiley & Sons.
Reyes S. J. C., (1999).”El estado límite de servicio en el diseño sísmico de edificios”, Tesis
doctoral, División de Estudios de Posgrado de la Facultad de Ingeniería, Universidad
Nacional Autónoma de México.
Ruiz S. E., Urrego O. E., y Silva F., (1995). “Influence of the spatial distribution of energy-
dissipating bracing elements on the seismic response of multistory frames”, Earthquake
Engineering and Structural Dynamics, 24, 1511-1525.
Ruiz S. E., (1998). “Revisión sobre el desarrollo de disipadores de energía sísmica en México”,
V Simposio Nacional de Ingeniería Sísmica, Toluca, Estado de México, 155-166.
Ruiz S. E. y Badillo H., (2000). “Diseño Sísmico del Refuerzo de edificios con disipadores de
energía: Algunos estudios y aplicaciones en México”, Seminario sobre Desastres
Sísmicos, Centro de Ingeniería Sísmica, universidad Central de Venezuela, 1-15.
Ruiz S. E., (2001). “Recomendaciones preliminares para el diseño del refuerzo de edificios con
disipadores”, Informe a la Secretaría de Obras y Servicios del Gobierno del Distrito
Federal, Proyecto GDF-UNAM No. CA-033/00.
Ruiz S. E. y Esteva L. (2001). “Research and practice in the seismic design of buildings with
passive energy dissipating devices in Mexico”, 7th International Seminar on Seismic
Isolation, Passive Energy Dissipation and Active Control of Vibration of Structures,
Assisi, Italia.
21
REFERENCIAS
Ruiz S. E. y Donobhan G., (2007), “Métodos estático y dinámico modal para el diseño sísmico
de edificios con disipadores de energía”, Memorias del XVI Congreso Nacional de
Ingeniería Sísmica, Ixtapa-Zihuatanejo, México, 17, CD-ROM.
Shibata A. y Sozen M., (1976). “Substitute Structure Method for Seismic Design in Reinforced
Concrete”. Journal of the Structural Division. ASCE. Vol. 102, No. 6, 235-247.
Skinner R.I., Robinson W.H. y Mc Verry G.H., (1993). “An Introduction to Seismic Isolation”.
John Wiley & Sons.
Soong T. T., y Constantinou M. C., (1994). “Passive and Active Structural Vibration Control in
Civil Engineering”, Springer-Verlag, Wien-New York.
Stanton J.F., Roeder C.W. y Campbell T.I., (1993). “High Load Multi-Rotational Bridge
Bearings”, Final Report, National Cooperative Highway Research Program, NCHRP 10-
20A, Washington, DC.
Tsai K. C., Chen H. W., Hong C. P. y Su Y. F., (1993). “Design of steel triangular plate energy
absorbers for seismic-resistance construction”, Earthquake Spectral, 9, 505-528.
Wen Y. K. (1976). “Method for random vibration of hysteretic systems”, Journal of the
Engineering Mechanics Division, ASCE, 102, 249-263.
Amiri, G.G., McClure, G. (1996). Simplified Model for Seismic Behaviour of Tall Guyed
Telecommunication Towers. 1st Structural Specialty Conference, Canadian Society for
Civil Engineering, Vol. IIb, 823-834.
Amiri, G.G., McClure G. (1996). Seismic Response of Tall Guyed Telecommunication Towers.
11th World Conference on Earthquake Engineering, Acapulco, Gro. México.
Amiri, G.G., McClure G. (1998). Seismic Base Shear of Tall Guyed Telecommunication Towers.
11th European Conference on Earthquake Engineering, Paris, France.
22
REFERENCIAS
Amiri, G.G., Zahedi, M., Jalali, R.S. (2004). Multiple-Support Seismic Excitation of Tall Guyed
Telecommunication Towers. 13th World Conference on Earthquake Engineering,
Vancouver, B.C., Canada.
ANSI/TIA-222-G (2005). Structural Standard for Antenna Supporting Structures and Antennas.
Telecommunications Industry Association, 2500 Wilson Boulevard, Arlington, VA
22201, U.S.A.
AS 3995 (1994). Design of Steel Lattice Towers and Masts. Standards Association of Australia,
1 The Crescent, Homebush, NSW 2140.
ASCE/SEI 7-05 (2006). Minimum design Loads for Buildings and Other Structures. American
Society of Civil Engineers, Reston, 1801 Alexander Bell Drive, Reston, Virginia, 20191-
4400, U.S.A.
Assi, R., McClure, G., Yao, G.C. (2006). Seismic Force Amplification Factors for
Telecommunication Towers Mounted on Building Rooftops. 8th U.S. National
Conference on Earthquake Engineering, San Francisco, Ca.
Assi, R., McClure, G. (2007). A Simplified Method for Seismic Analysis of Rooftop
Telecommunication Towers. 9th Canadian Conference on Earthquake Engineering,
Ottawa, On.
Gálvez, C.A., McClure, G. (1995). A Simplified Method for Aseismic Design of Self-Supporting
Latticed Telecommunication Towers. 7th Canadian Conference on Earthquake
Enginnering, Montreal, Ca., 541-548.
Khedr, M., McClure, G. (1997). A Quasi-Static Method for Seismic Analysis of Self-Supporting
Latticed Telecommunication Towers. 25th Annual Conference of the Canadian Society
for Civil Enginnering, Sherbrooke, Ca., Vol. 6, 327-336.
Khedr, M.A., McClure, G. (2000). A Simplified Method for Seismic Analysis of Lattice
Telecommunication Towers. Canadian Journal of Civil Enginnering, Vol. 27, 533-542.
23
REFERENCIAS
Konno, T., Kimura, E., (1973). Earthquake Effects on Steel Tower Structures Atop Buildings.
World Conference on Earthquake Engineering, Tokyo/Kyoto, Japan, Vol. 1, 184-193.
Madugula, M.K.S. (2002). Dynamic Response of Lattice Towers and Guyed Masts. American
Society of Civil Engineers, Reston, 1801 Alexander Bell Drive, Reston, Virginia, 20191-
4400, U.S.A.
McClure, G., Guevara, E.I. (1994). Seismic Behaviour of Tall Guyed Telecommunication
Towers. IASS-ASCE International Symposium on Spatial Lattice and Tension
Structures, Atlanta, U.S.A., 259-268.
McClure, G., Georgi, L., Assi, R. (2004). Seismic Considerations for Telecommunication Towers
Mounted on Building Rooftops. 13th World Conference on Earthquake Engineering,
Vancouver, B.C., Canada.
Vieira, P.A., Gil, S.J.A. (1986). Earthquake Action Effects in Radio and TV Steel Towers and
Masts. 8th European Conf. on Earthquake Engineering, Laboratorio Nacional de
Engenharia Civil, Lisboa, Portugal, 71-78.
Dobry, R., Oweis, I. & Urzua, A. (1976), “Simplified Procedures for Estimating the Fundamental
Period of a Soil Profile”, Bulletin of the Seismological Society of America, 66:4.
Einstein, H. H. & Schwartz, C. W. (1979), “Simplified Analysis for Tunnel Supports”, Journal of
the Geotechnical Engineering Division, ASCE, 105.GT4: 499-518.
Flügge, W. (1960), “Stresses in Shells”, Springer-Verlag New York Inc., Third Printing, USA.
Hashash, Y. M A., Hook, J. J., Schmidt, B. & Chiang Yao, J. I. (2001), “Seismic design and
Analysis of underground Structures”, Tunneling and Underground Space Technology,
16: 247-293.
24
REFERENCIAS
Hashash, Y. M A., Park, D. & Chiang Yao, J. I. (2001), “Ovaling deformations of Circular Tunnels
under Seismic Loading, an update on Seismic Design and Analysis of Underground
Structures”, Tunneling and Underground Space Technology, 20: 435-441.
Kuesel, T. R. (1969), “Earthquake Design Criteria for Subways”, Journal of the Structural
Divisions, ASCE, 95:ST6: 1213-1231.
Mohraz, B., Hendron, A. J., Ranken, R. E. & Salem, H. (1975), “Liner-Medium Interaction in
Tunnels”, Journal of the Construction Divisions, ASCE, 101:CO1: 127-141.
Monsees, T. R. (1996), “Soft Ground Tunneling”, Tunnel Engineering Handbook, Edited by John
O. Bickel, Thomas R. Kuesel & Elwin H. King, Second Edition, Fifth printing, Kluwer
Academic Publishers, USA, 97-121.
Pakbaz, M. C. & Yareevand, A. (2005), “2-D Analysis of Circular Tunnel Against Earthquake
Loading”, Tunneling and Underground Space Technology, 20: 411-417.
Peck, R. B., Hendron, A. J. Y Mohraz, B. (1972), ”State of the Art of Soft Ground Tunneling”,
Proceedings of the Rapid Excavation and Tunneling Conference, Chicago, IL, 1: 259-
286.
Penzien, J. (2000), “Seismically Induced Racking of Tunnel Linings”, Earthquake Engineering &
Structural Dynamics, 29: 683-691.
St. John, C. M: & Zahrah, T. F. (1987), “Aseismic design of Underground Structures”, Tunneling
and Underground Space Technology, 2: 247-293.
USACE (1997), “Engineering and Design: Tunnels and Shafts in Rock”, EM110-2-2901.
Wang, J. N. (1993), “Seismic Design in Tunnels: A simple State of Art Design Approach”,
Published by Parsons Brinckerhoff Inc., First Edition, USA.
ASTM D1143-81, (1989a), “Standard Method of Testing Piles Under Static Axial Compressive
Load”, Philadelphia, 04.08: 179-189.
ASTM D3689-83, (1989b), “Standard Method of Testing Individual Piles Under Static Axial
Tensile Load”, Philadelphia, 04.08: 474-484.
25
REFERENCIAS
ASTM D3966-81, (1989c), “Standard Method of Testing Piles Under Lateral Load”, Philadelphia,
04.08: 494-508.
Balla, A. (1969), “The Resistance to Breaking out of Mushroom Foundations for Pylons”,
Proceedings V International Conference of Soil Mechanics and Foundation
Engineering, Paris, France, 1: 569 pp.
Brinch Hansen, J. (1961), “The Ultimate Resistance of Rigid Piles Against Transversal Forces”,
Danish Geotechnical Institute, Copenhagen, Bull. No. 12: 5-9.
Broms, B. (1964a), “The Lateral Resistance of Piles in Cohesive Soils”, Journal Soil Mechanics
and Foundation Division, ASCE, 90 (SM2): 27-63.
Broms, B. (1964b), “The Lateral Resistance of Piles in Cohesionless Soils”, Journal Soil
Mechanics and Foundation Division, ASCE, 90 (SM3): 123-156.
Bhudu, M. & Al-Karni, A. (1993), “Seismic Bearing Capacity of Soils”, Geotechnique, 43 (1): 181
– 187.
Das, B. M. (1999), “Shallow Foundations: Bearing Capacity and Settlement”, CRC Press LLC,
the United States of America.
Day, R. W. (2002), “Geotechnical Earthquake Engineering Handbook”, McGraw Hill, the United
States of America.
Duncan (2005), “Soil Strength and Slope Stability”, John Wiley & Sons, USA.
Hansen, B. (1961), “The Lateral Resistance of Piles in Cohesive Soils”, Journal Soil Mechanics
and Foundation Division, ASCE, 90 (SM3): 123-156.
26
REFERENCIAS
Hansen, J. B. (1970), “A Revised and Extended Formula for bearing Capacity”, Danish
Geotechnical Institute, Copenhagen, Bul. No. 28: 21.
Janbu, N. (1957), “Earth Pressures and Bearing Capacity Calculations by Generalized Method
of Slices”, Proceedings 4th International Conference in Soil Mechanics and Foundatins
Engineering, London, 2: 207–213.
Kramer, S. L. (1996), “Geotechnical Earthquake Engineering”, Prentice Hall, the United States of
America.
MDOC (1981), Estructuras, C.1.2, Criterios de Diseño. Acciones, IIE, CFE, México.
MDOC (2007); Diseño por sismo, Interacción suelo-estructura, IIE, CFE, México.
Merlos, J. & Romo, M. P. (2006), “Fluctuant Bearing Capacity of Shallow Foundations during
Earthquakes”, Soil Dynamics and Earthquake Engineering, 26: 103-114.
Meyerhof, G. G. & Adams, J. I. (1968), “The Ultimate Uplift Capacity of Foundations”, Canadian
Geotechnical Journal, 5:4: 225 pp.
Novak, M. (1974), “Dynamic Stiffness and Damping of Piles”, Canadian Geotechnical Journal,
11 (4): 574-598.
Novak, M. (1977), “Vertical Vibration of Floating Piles”, Journal Engineering Mechanics Division,
ASCE, 103 (EM1): 153-168.
Poulos, H. G. (1971a), “Behavior of Laterally Loaded Piles: I-Single Piles”, Journal Soil
Mechanics and Foundation Division, ASCE, 97 (SM5): 711-731.
Poulos, H. G. (1971b), “Behavior of Laterally Loaded Piles: II-Pile Groups”, Journal Soil
Mechanics and Foundation Division, ASCE, 97 (SM5): 733-751.
Poulos, H. G. & Davis, E. H. (1980), “Pile Foundation Analysis and Design”, Wiley, New York.
27
REFERENCIAS
Prakash, S. & Puri, V. K. (1988), “Foundations for Machines Analysis and Design”, Mc. Graw-
Hill, USA.
Prakash, S. & Sharma, H. D. (1990), “Pile Foundations in Engineering Practice”, John Wiley &
Sons, USA, 734 pp.
Reese, L. C. & Matlock, H. (1956), “Non-dimensional Solutions for Laterally Loaded Piles with
Soil Modulus Assumed Proportional to Depth”, Proceedings 8th Texas Conference on
Soil Mechanics and Foundation Engineering, Austin, TX, 1-41.
Richards, R., Elms, D. G. & Budhu, M. (1990), “Dynamic Fluidization of Soils”, Journal of the
Geotechnical Engineering, ASCE, 116 (5): 740–759.
Richards, R., Elms, D. G. & Budhu, M. (1993), “Seismic-Bearing Capacity and Settlements of
Foundations”, Journal of the Geotechnical Engineering, ASCE, 119 (4): 662–674.
Standard 691 IEEE (2001), “Guide for Transmission Structure Foundation Design and Testing”,
New York.
Vesic, A. S. (1973), “Analysis of Ultimate Loads of Shallow Foundation”, Journal Soil Mechanics
and Foundation Division, ASCE, 99 (SM1): 45-73.
Vesic, A. S. (1973), “Analysis of Ultimate Loads of Shallow Foundation”, Journal Soil Mechanics
and Foundation Division, ASCE, 99 (SM1): 45-73.
28