Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Revisores
Dr. Víctor Hugo Olivares Peregrino
Dra. Guadalupe López López
Dr. Jarniel García Morales
28 de enero del 2021 1
Contenido
1. Introducción.
2. Motivaciones.
3. Problemática.
4. Objetivos.
5. Trabajos previos.
6. Área de oportunidad.
7. Bibliografía.
2
1. Introducción
Energías renovables
Hidráulica Solar
3
1. Introducción
Aprovechamiento de la energía solar.
Efecto Fotoeléctrico.
Solar Fotovoltaica
Energía solar
Solar Térmica
4
1. Introducción
Sistemas CPV/T
[1] C. Renno, F. Petito, D. D’Agostino, and F. Minichiello, “Modeling of a CPV/T-ORC Combined System Adopted for an Industrial User,” Energies, vol.
13, no. 13, 2020. 5
2. Motivaciones
Evolución de costes (en dólares) por fuentes de energía.
[2] Lazard’s Levelized Cost, “Lazard’s levelized cost of energy analysis — version 13.0”, 2019. [En línea]. Disponible en:
https://www.lazard.com/media/451086/lazards-levelized-cost-of-energy-version-130-vf.pdf. [Accedido: 03/01/21]. 6
2. Motivaciones
Evolución histórica de la energía fotovoltaica en México.
[3] Secretaria de Energía del Gobierno Federal de la República Mexicana, “Reporte de Avance de Energías Limpias Primer Semestre 2018”, 2018. [En
línea]. Disponible en: https://www.gob.mx/cms/uploads/attachment/file/418391/RAEL_Primer_Semestre_2018.pdf. [Accedido: 03/01/21]. 7
2. Motivaciones
Mapa de radiación solar en México.
[4] Secretaria de Economía del Gobierno Federal de la República Mexicana, “Energías Renovables”, 2015. [En línea]. Disponible en:
https://www.gob.mx/cms/uploads/attachment/file/76391/DS_Energias_Renovables_ES.pdf. [Accedido: 06/01/21]. 8
3. Problemática
Problemática
[5] E. Skoplaki, J. a. Palyvos, “On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power
correlations,” Sol. Energy, Vol. 83, 2009, pp 614–624. 9
4. Objetivos
Objetivo general
10
4. Objetivos
Objetivos específicos
11
5. Trabajos previos
Temas de interés para este trabajo de tesis
Xiao et al. [6] presenta tres apartados importantes que se deben tomar en consideración
al estudiar las tecnologías enfocadas en el enfriamiento de panales fotovoltaicos
empleados en sistemas CPV/T.
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling Technologies for Concentrated Photovoltaics (CPV)
Systems,” Energies, vol. 11, no. 12, p. 3416, Dec. 2018. 12
5. Trabajos previos
Consideraciones de diseño en los métodos de enfriamiento
Bahaidarah et al. [7] señala una ausencia de estudios enfocados en el análisis de los
sistemas de enfriamiento CPV desde los aspectos económicos y ambientales.
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling Technologies for Concentrated Photovoltaics (CPV)
Systems,” Energies, vol. 11, no. 12, p. 3416, Dec. 2018.
[7] H. M. S. Bahaidarah, A. A. B. Baloch, and P. Gandhidasan, “Uniform cooling of photovoltaic panels: A review,” Renew. Sustain. Energy Rev., vol. 13
57, pp. 1520–1544, 2016.
5. Trabajos previos
Uniformidad de temperatura (Artículo 1)
[8] X. Guan, F. Yuan, H. Qiu and J. He, "Simulation of Concentrating Photovoltaic/Thermal System Based on Jet Cooling," 2019 International
Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), Istanbul, Turkey, 2019, pp. 1-6. 14
5. Trabajos previos
Uniformidad de temperatura (Artículo 1 – Continuación)
[8] X. Guan, F. Yuan, H. Qiu and J. He, "Simulation of Concentrating Photovoltaic/Thermal System Based on Jet Cooling," 2019 International
Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), Istanbul, Turkey, 2019, pp. 1-6. 15
5. Trabajos previos
Uniformidad de temperatura (Artículo 2)
[9] G. Xin, Y. Wang, Y. Sun, Q. Huang, and L. Zhu, “Experimental study of liquid-immersion III–V multi-junction solar cells with dimethyl silicon oil
under high concentrations,” Energy Convers. Manag., vol. 94, pp. 169–177, 2015. 16
5. Trabajos previos
Uniformidad de temperatura (Artículo 2 – Continuación)
Distribución de temperatura de la celda fotovoltaica de triple unión del concentrador sumergida en aceite de silicio de 2,5 mm de
espesor con diferentes caudales másicos: ( a , b ) representa la superficie frontal y la superficie posterior respectivamente [9].
[9] G. Xin, Y. Wang, Y. Sun, Q. Huang, and L. Zhu, “Experimental study of liquid-immersion III–V multi-junction solar cells with dimethyl silicon oil
under high concentrations,” Energy Convers. Manag., vol. 94, pp. 169–177, 2015. 17
5. Trabajos previos
Temas de interés para este trabajo de tesis (Recapitulación)
Xiao et al. [6] presenta tres apartados importantes que se deben tomar en consideración
al estudiar las tecnologías enfocadas en el enfriamiento de panales fotovoltaicos
empleados en sistemas CPV/T.
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling Technologies for Concentrated Photovoltaics (CPV)
Systems,” Energies, vol. 11, no. 12, p. 3416, Dec. 2018. 18
5. Trabajos previos
Tecnologías de refrigeración de los sistemas CPV
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling Technologies for Concentrated Photovoltaics (CPV)
Systems,” Energies, vol. 11, no. 12, p. 3416, Dec. 2018. 19
5. Trabajos previos
Refrigeración por intercambiador de calor tierra/agua o tierra/aire
[10] A. Sahay, V. K. Sethi, and A. C. Tiwari, “Design, optimisation and system integration of low cost Ground Coupled Central Panel Cooling System
(GC-CPCS)” Int. J. Curr. Eng. Technol. 2013. 20
5. Trabajos previos
Refrigeración combinada por microcanales e impacto de chorro
[11] A. Radwan, S. Ookawara, and M. Ahmed, “Analysis and simulation of concentrating photovoltaic systems with a microchannel heat sink,” Sol.
Energy, vol. 136, pp. 35–48, 2016.
[12] J. Barrau, J. Rosell, D. Chemisana, L. Tadrist, and M. Ibañez, “Effect of a hybrid jet impingement/micro-channel cooling device on the 21
performance of densely packed PV cells under high concentration,” Sol. Energy, vol. 85, no. 11, pp. 2655–2665, 2011.
5. Trabajos previos
Refrigeración combinada por microcanales e impacto de chorro ej.
Esquema del sistema CPV con celdas multiunión, integrado con un dispositivo de Funcionamiento del dispositivo de refrigeración del sistema híbrido por
enfriamiento activo [13]. microcanales e impacto de chorro [12].
[12] J. Barrau, J. Rosell, D. Chemisana, L. Tadrist, and M. Ibañez, “Effect of a hybrid jet impingement/micro-channel cooling device on the
performance of densely packed PV cells under high concentration,” Sol. Energy, vol. 85, no. 11, pp. 2655–2665, 2011.
[13] F. Al-Amri and T. K. Mallick, “Alleviating operating temperature of concentration solar cell by air active cooling and surface radiation,” Appl. 22
Therm. Eng., vol. 59, no. 1, pp. 348–354, 2013.
5. Trabajos previos
Estudio de los fluidos de refrigeración en múltiples escenarios
C. Renno [14] señala la falta de trabajos que reporten el comportamiento térmico de los
sistemas de refrigeración empleados en los CPV/T a lo largo de grandes periodos de
tiempo. Esto con el objetivo de observar las distintas condiciones de funcionamiento del
CPV/T a lo largo de un año.
Valores mensuales de TJ temperatura de la celda durante las horas de luz y todo el día [14].
[14] C. Renno, “Theoretical and Experimental Evaluation of the Working Fluid Temperature Levels in a CPV/T System,” Energies, vol. 13, no. 12, p.
3077, Jun. 2020. 24
6. Área de oportunidad
Áreas de oportunidad previstas.
- Xiao et al. [6] recomienda investigar a fondo los sistemas de enfriamiento basados en
tubería de calor, refrigeración por intercambiador de calor tierra/agua y los sistemas
híbridos como el de tipo microcanal/impacto de chorro.
- C. Renno [14] comenta la falta de trabajos que reporten el comportamiento térmico
de los sistemas de refrigeración en los CPV/Ta lo largo de periodos largo de tiempo.
- Bahaidarah et al. [7] señala una ausencia de estudios enfocados en el análisis de los
sistemas de enfriamiento CPV desde los aspectos económicos y ambientales.
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling Technologies for Concentrated Photovoltaics (CPV)
Systems,” Energies, vol. 11, no. 12, p. 3416, Dec. 2018.
[7] H. M. S. Bahaidarah, A. A. B. Baloch, and P. Gandhidasan, “Uniform cooling of photovoltaic panels: A review,” Renew. Sustain. Energy Rev., vol.
57, pp. 1520–1544, 2016.
[14] C. Renno, “Theoretical and Experimental Evaluation of the Working Fluid Temperature Levels in a CPV/T System,” Energies, vol. 13, no. 12, p.
3077, Jun. 2020.
25
6. Área de oportunidad
Contribución prevista.
26
Referencias 7. Referencias
[1] C. Renno, F. Petito, D. D’Agostino, and F. Minichiello, “Modeling of a CPV/T-ORC Combined System
Adopted for an Industrial User,” Energies, vol. 13, no. 13, 2020.
[2] Lazard’s Levelized Cost, “Lazard’s levelized cost of energy analysis — version 13.0”, 2019. [En línea].
Disponible en: https://www.lazard.com/media/451086/lazards-levelized-cost-of-energy-version-130-vf.pdf.
[Accedido: 06/01/21].
[3] Secretaria de Energía del Gobierno Federal de la República Mexicana, “Reporte de Avance de Energías
Limpias Primer Semestre 2018”, 2018. [En línea]. Disponible en:
https://www.gob.mx/cms/uploads/attachment/file/418391/RAEL_Primer_Semestre_2018.pdf. [Accedido:
03/01/21].
[4] Secretaria de Economía de México, “Energías Renovables”, 2015. [En línea]. Disponible en:
https://www.gob.mx/cms/uploads/attachment/file/76391/DS_Energias_Renovables_ES.pdf. [Accedido:
06/01/21].
[5] E. Skoplaki, J. a. Palyvos, “On the temperature dependence of photovoltaic module electrical
performance: A review of efficiency/power correlations,” Sol. Energy, Vol. 83, 2009, pp 614–624.
[6] M. Xiao, L. Tang, X. Zhang, I. Lun, and Y. Yuan, “A Review on Recent Development of Cooling
Technologies for Concentrated Photovoltaics (CPV) Systems,” Energies, vol. 11, no. 12, p. 3416, Dec.
2018.
[7] H. M. S. Bahaidarah, A. A. B. Baloch, and P. Gandhidasan, “Uniform cooling of photovoltaic panels: A
review,” Renew. Sustain. Energy Rev., vol. 57, pp. 1520–1544, 2016. 27
Referencias (Continuación) 7. Referencias
[8] X. Guan, F. Yuan, H. Qiu and J. He, "Simulation of Concentrating Photovoltaic/Thermal System
Based on Jet Cooling," 2019 International Conference on Power Generation Systems and Renewable
Energy Technologies (PGSRET), Istanbul, Turkey, 2019, pp. 1-6.
[9] G. Xin, Y. Wang, Y. Sun, Q. Huang, and L. Zhu, “Experimental study of liquid-immersion III–V multi-
junction solar cells with dimethyl silicon oil under high concentrations,” Energy Convers. Manag.,
vol. 94, pp. 169–177, 2015.
[10] A. Sahay, V. K. Sethi, and A. C. Tiwari, “Design, optimisation and system integration of low cost
Ground Coupled Central Panel Cooling System (GC-CPCS),” Int. J. Curr. Eng. Technol. 2013.
[11] A. Radwan, S. Ookawara, and M. Ahmed, “Analysis and simulation of concentrating photovoltaic
systems with a microchannel heat sink,” Sol. Energy, vol. 136, pp. 35–48, 2016.
[12] J. Barrau, J. Rosell, D. Chemisana, L. Tadrist, and M. Ibañez, “Effect of a hybrid jet
impingement/micro-channel cooling device on the performance of densely packed PV cells under
high concentration,” Sol. Energy, vol. 85, no. 11, pp. 2655–2665, 2011.
[13] F. Al-Amri and T. K. Mallick, “Alleviating operating temperature of concentration solar cell by air
active cooling and surface radiation,” Appl. Therm. Eng., vol. 59, no. 1, pp. 348–354, 2013.
[14] C. Renno, “Theoretical and Experimental Evaluation of the Working Fluid Temperature Levels in a
CPV/T System,” Energies, vol. 13, no. 12, p. 3077, Jun. 2020.
28
Por su atención
¡Gracias!
29