Documentos de Académico
Documentos de Profesional
Documentos de Cultura
de Valladolid 1
Dirección General
vidrios
Notas de autor
Instituto Tecnológico Superior
de Valladolid 2
Dirección General
TABLA DE CONTENIDO
Resumen ........................................................................................................................................... 3
Abstract............................................................................................................................................. 5
X. Resultados................................................................................................................................... 6
Conclusiones ................................................................................................................................... 6
Bibliografía ....................................................................................................................................... 6
Anexos .............................................................................................................................................. 6
Instituto Tecnológico Superior
de Valladolid 3
Dirección General
Resumen
Cada año incrementa los residuos plásticos en ríos, áreas verdes, lugares públicos,
aumenta la contaminación del suelo y el agua, sigue creciendo la emisión de gases hacia la
atmosfera y cada vez menos se toma acciones para poder eliminar o al menos reducir estos
factores que perjudican al ambiente) en lugar de los agregados finos convencionales a fin de
innovación aplicando los concretos modificados siendo una opción viable a las mejores
estructuras.
se pueden aplicar en varios trabajos de la ingeniería civil, así presentar el análisis de las
residuos.
Instituto Tecnológico Superior
de Valladolid 4
Dirección General
Residuos: residuo inservible, o todo material no deseado y del que se tiene intención de
desechar.
Instituto Tecnológico Superior
de Valladolid 5
Dirección General
Abstract
Every year the plastic waste in rivers, green areas, public places, soil and water
pollution increases, the emission of gases into the atmosphere continues to grow and less
and less action is taken to eliminate or at least reduce these problems that the world faces
every day.
the construction area and also in an open way to the society, the elaboration of a modified
concrete using inorganic wastes (being plastic and glass the factors that damage the
environment) instead of the conventional fine aggregates in order that the problems
traditional concretes using inorganic wastes. therefore, innovation works are used
applying the modified concretes being a viable option to the best structures.
Based on the research, it was found that the incorporation of inorganic elements in
conventional mixtures has revealed variations in the mechanical properties and its
behavior as an aggregate.
in various civil engineering works and to present the analysis of the mechanical properties
of modified concretes.
Instituto Tecnológico Superior
de Valladolid 6
Dirección General
Capitulo I. Introducción
Capitulo V. Objetivos
5.1 General
5.2 Específicos
VI. Justificación
VII. Hipótesis
VIII. Metodología
8.2 Delimitaciones
8.3 Técnicas
X. Resultados
Conclusiones
Bibliografía
Anexos