Documentos de Académico
Documentos de Profesional
Documentos de Cultura
a. Las inspecciones de código fuente son frecuentemente usadas en las pruebas de componentes.
b. Las Pruebas de componente buscan defectos en los programas que se pueden probar individualmente.
c. Las pruebas de componente son una parte importante de las pruebas de aceptación del usuario.
d. Las pruebas de componente tienen como objetivo exponer los problemas en las interacciones entre
los componentes de software y los componentes de hardware.
a. Variables no declaradas
b. Funciones no referenciadas
5. ¿Cuáles de las siguientes actividades de pruebas pueden ser automatizadas?
I. Inspecciones y Revisiones
V. Generación de datos
a. i, iii, iv.
b. i, ii, iii.
c. ii, iv, v.
d. ii, iii, v.
6. ¿Cuál de los siguientes es un objetivo de realizar un proyecto piloto para la introducción de una
herramienta de pruebas?
8. En un enfoque de pruebas REACTIVO ¿Cuándo se podría esperar que la mayor parte del trabajo
del diseño de pruebas empiece?
a. Durante el desarrollo
I. Localizar un defecto.
a. i, iii.
c. ii, iv.
d. i, ii.
¿Cuál es el resultado esperado para cada uno de los siguientes casos de prueba?
B. Caso de Prueba 3: Juan José tiene 65 años de edad, no es fumador y reside en Colombia.
b. A– No asegurar; B – No asegurar.
I. Encontrar defectos
a. i,ii, y iii.
c. i, ii y iv.
d. i,iii y iv.
III. Analizar los requisitos y especificaciones para determinar las condiciones de prueba.
13. ¿Cuál es el PRINCIPAL propósito del análisis de impacto para los probadores?
d. Determinar cómo los Sistemas existentes se verán afectados por los cambios.
14. ¿Cuál de los siguientes requerimientos podrían ser probados por un sistema de pruebas
funcional?
a. El sistema debería ser capaz de desempeñar sus funciones durante un promedio de 23 horas y
50 minutos por día.
a. S/. 28000.
b. S/. 33501.
c. S/. 32001.
d. S/. 1500.
16. ¿Cuál de los siguientes define la secuencia en la cual las pruebas deben ser ejecutadas?
a. Plan de Pruebas
a. A, B, E, B, C, F, D.
b. A, B, E, B, C, F, F.
c. A, B, E, B, C, D.
d. A, B, C, F, F, D.
Pasajero frecuente SI SI NO NO
Clase NEGOCIOS ECONOMICA NEGOCIOS ECONOMICA
Acciones
Actualizar a Primera SI NO NO NO
clase
Actualizar a Clase N/A SI N/A NO
Negocios
¿Cuál es el resultado esperado para cada uno de los siguientes casos de prueba?
19. Durante ¿Cuál actividad del proceso de pruebas básico se pueden determinar si son necesarias MAS
pruebas?
a. Riesgos del proyecto son potenciales fallas en el software o sistema; riesgos del producto son riesgos que se
asocian a la capacidad del proyecto para cumplir con sus objetivos.
b. Riesgos del proyecto son riesgos que se asocian a la capacidad del proyecto para cumplir con sus objetivos.;
riesgos del producto son potenciales fallas en el software o sistema.
c. Riesgos del proyecto están generalmente relacionados a temas relacionados al proveedor, factores
organizacionales o problemas técnicos; riesgos del producto están generalmente relacionados con la falta de
habilidad del personal.
d. Riesgos del proyecto son los riesgos de que el software entregado no funcione correctamente; riesgo del
producto están generalmente relacionados a temas relacionados al proveedor, factores organizacionales o
problemas técnicos.
21. Dada la siguiente especificación, ¿Cuál de los siguientes valores de edad están en LA MISMA
partición de equivalencia?
22. Considerando el siguiente pseudocódigo, calcular el MINIMO número de casos de prueba para
alcanzar la cobertura de sentencia y el MINIMO número de casos para alcanzar la cobertura de
decisión respectivamente.
LEER A
LEER B
LEER C
SI C>A ENTONCES
SI C>B ENTONCES
IMPRIMIR " ”C” DEBE SER MENOR QUE POR LO MENOS UN NÚMERO"
SINO
FIN DEL SI
SINO
FIN DEL SI
a. 3, 3.
b. 2, 3.
c. 2, 4.
d. 3, 2.
a. El código no puede ser actualizado en producción hasta que las pruebas independientes se
hayan completado.
24. ¿Cuál de las siguientes herramientas es más probable que contenga un comparador?
d. Herramientas de Seguridad
A B C D E F
SS S1
S1 S2
S2 S3 S1
S3 ES S3
ES
26. ¿Cuál de las siguientes es una característica de buenas prácticas de pruebas en algún modelo de
ciclo de vida?
27. ¿cuál actividad en el proceso de pruebas básico incluye la evaluación de la testeabilidad de los
requerimientos del sistema?
c. Cierre de Pruebas
28. Los siguientes enunciados son usados para describir la base para la creación de casos de prueba
usando técnicas de caja negra o técnicas de caja blanca:
¿Cuál combinación de sentencias describe la base para la elaboración de casos de prueba usando
técnicas de caja negra?
a. ii y iii.
b. ii y iv.
c. i y iv.
d. i y iii.
29. ¿Cúal es generalmente la más importante razón para dirigir los esfuerzos de pruebas basados en
riesgos?
b. Porque las pruebas basadas en el riesgo son un enfoque más eficiente para encontrar
defectos.
c. Porque las pruebas basadas en el riesgo es el camino más efectivo para mostrar
valores.
30. ¿Cuál de los siguientes define PRINCIPALMENTE el alcance del mantenimiento de pruebas?
c. El tiempo transcurrido desde que fue hecho el último cambio del sistema.
a. Un probador independiente puede encontrar defectos más rápido que la persona que escribió
el software.
b. Un probador independiente puede estar más enfocado en cómo trabaja el software que la
persona que escribió el software.
c. Un probador independiente puede ser más efectivo y eficiente, porque esta menos
familiarizado con el software, que la persona que escribió el software.
d. Un probador independiente puede ser más efectivo encontrando defectos que son
omitidos por la persona que escribió el software.
32. En las pruebas, ¿cuál de las siguientes representan las principales preocupaciones de Gestión de la
Configuración?
ii. Todos los elementos de prueba son usados en las pruebas de aceptación finales.
iv. Todos los elementos de prueba son trazados por los cambios
vi. Todos los elementos de prueba son relacionados con cada uno y otros elementos de
desarrollo.
a. i, iv, vi.
b. ii, iii, v.
c. i, iii, iv.
d. iv, v, vi.
33. ¿Cuál de los siguientes podria ser una medición válida del progreso de pruebas?
34. ¿Cuál de los siguientes enunciados es VERDADERO? Selecciona todas las opciones CORRECTAS
Las pruebas de regresión se debe realizar:
a. ii y iv.
c. i, ii y iii.
d. i y iii.
35. ¿En cuál orden podrían ocurrir las fases de una revisión formal?
36. ¿Cuál de los siguientes son objetivos válidos para el reporte de incidencias?
iv. Proporcionar a los probadores de un medio de seguimiento de la calidad del sistema bajo
prueba.
a. i, ii, iii.
b. i, ii, iv.
c. i, iii, iv.
37. Considere las siguientes Técnicas . ¿Cuales son técnicas estáticas y Cuales son Técnicas dinámicas?
i. Partición de Equivalencia.
iv.Pruebas exploratorias.
v. Decision Testing.
vi Inspecciones.
38. ¿Por qué las pruebas estáticas y las pruebas dinámicas son complementarias?
b. Porque tienen diferentes objetivos y difieren en los tipos de defectos que encuentran.
39. ¿Cuál de los siguientes son desventajas de la captura de pruebas y grabación de las actividades
manuales de n probador?
ii Los datos por un número similar de pruebas son automáticamente almacenados y separados del
script.
iii Los resultados esperados deben ser agregados en la captura del script.
iv El script capturado documenta las entradas exactas ingresadas por el probador.
v cuando se vuelve a ejecutar la prueba capturada , el probador podría requerir depurar el script si
este no funciona de manera correcta.
a. i, iii, iv, v.
b. ii, iv y v.
c. i, ii y iv.
d. i y v.
40. ¿Cuál de los siguientes está determinado por un nivel de riesgo del producto identificado?
Question Answer
No
1. A
2. B
3. D
4. B
5. C
6. C
7. B
8. A
9. D
10. C
11. C
12. A
13. D
14. C
15. B
16. B
17. A
18. C
19. B
20. B
21. C
22. A
23. D
24. B
25. B
26. C
27. A
28. A
29. A
30. B
31. D
32. A
33. C
34. B
35. D
36. B
37. B
38. D
39. A
40. A
EXAMEN 2
a) v-3,w-2,x-1,y-5,z-4
b) v-2,w-5,x-1,y-4,z-3
c) v-3,w-4,x-1,y-5,z-2
d) v-2,w-1,x-4,y-3,z-5
10 Cual de los siguientes enunciados acerca e las pruebas de sistema No es verdadero?
a) Pruebas del sistema son frecuentemente desarrolladas por equipos independientes..
b) Pruebas Funcionales son más usadas que las pruebas estructurales.
c) Los defectos encontrados en las pruebas de sistema son muy caros de corregir.
d) Usuarios finales deben estar involucrados en las pruebas del sistema
11 Cuáles de los siguientes es falso?
a) Los incidentes deben ser siempre corregidos.
b) Un incidente ocurre cuando un resultado planeado difiere del resultado real.
c) Incidentes deben ser analizados para ayudar al proceso de mejora de pruebas.
d) Un incidente puede ser contratado contra la documentación.
12 Se han realizado pruebas suficientes cuando:
a) El tiempo se agota
b) El nivel de confianza se ha logrado.
c) Ya no se encuentran mas fallos.
d) Los usuarios no encuentran defectos graves.
13 Cual de los siguientes no es verdadero acerca de los incidentes
a)La resolución de un Incidente es la responsabilidad del autor del software bajo prueba.
b) Los incidentes pueden ser comparados contra los requerimientos del usuario.
c) Los incidentes requieren investigación y / o corrección.
d) Los incidentes se produce cuando los resultados previstos y los reales difieren.
Examen Final CTFL
NOTA: Solo una respuesta por pregunta
14
a)
15 ¿Cuál de las siguientes es falsa?
a) Se establece que los módulos se prueban contra los requerimientos del usuario.
b) Es sólo un modelo de la fase de prueba.
c) Se especifican las técnicas de prueba a utilizar.
d) Se incluye verificación de diseños.
19 El supuesto oráculo de pruebas:
a) Hay algún sistema existente que puede predecir la salida de la prueba.
b) El probador de rutina puede identificar el resultado correcto de la prueba.
c) El probador sabe todo acerca del software bajo prueba.
d) Las pruebas deben ser sean revisados por evaluadores experimentados.
Examen Final CTFL
NOTA: Solo una respuesta por pregunta
20
a) Que más se encuentran en las fases de desarrollo temprano y la más cara en las fases de
prueba finales
b) Ellos son los más fáciles de encontrar durante las pruebas del sistema, pero el más caro
para fijar a continuación.
c) Las averías más se encuentran en las fases de desarrollo, pero la más cara para fijar a
continuación.
d) A pesar de las fallas más caras de encontrar durante las fases de desarrollo temprano, que
son los más baratos para fijar a continuación.
21
¿Cuál de las siguientes es la mejor fuente de “resultados esperados” para los scripts
de la aceptación del usuario?
a) Los resultados reales
b) La especificación del Programa.
c) Los Requisitos de usuario
d) Especificación del Sistema.
1 A
2 A
3 D
4 C
5 A
6 A
7 C
8 B
9 C
10 D
11 A
12 B
13 A
14 C
15 B
16 B
17 D
18 D
19 B
20 A
21 D
22 A
23 B
24 C
25 D
26 C
27 C
28 A
29 C
30 D
31 C
32 B
33 C
34 C
35 B
36 D
37 C
38 D
39 D
40 B
EXAMEN 3
a) Un error.
b) Una falta
c) Fallo
d) Defecto
V - Cada Semana.
3. El estándar IEEE 829 de documentación del Plan de pruebas estándar contiene todo lo
siguiente excepto:
a) Elementos de Prueba
b) Entregables de Prueba
c) Tareas de Prueba
d) Especificación de Pruebas
4. Cuándo deben finalizarse las pruebas?
d) Esto depende del riesgo del sistema que está siendo probado.
5. El orden de los números en un sistema de control de existencias puede oscilar entre 10.000 y 99.999
inclusive. ¿Cuál de los siguientes inputs podría ser el resultado de un diseño de pruebas válido de
clases de equivalencia y análisis de valores límite?
c) testing a system function using only the software required for that function
9. Q9 ¿Cuál de los siguientes is the PRINCIPAL purpose of the integration strategy for Pruebas de
Integración in the small?
iv. the incident record does not include information on test environments.
12. Q12ada la siguiente code, which statement is true about the MINIMO number of test cases required
for full statement y branch coverage?
Read p
Read q
IMPRIMIR "Large"
FIN DEL SI
IF p > 50 THEN
FIN DEL SI
b) testing that the components that comprise the system function together
a) requirements
b)ocumentation
c) test cases
15. Q16 ¿Cuál de los siguientes items would not come under Configuration Management?
a) operating systems
b) test documentation
c) live data
d) user requirement documents
c) memory leaks
18. Q19 ¿Cuál de los siguientes techniques is NOT a black box technique?
b) LCSAJ
c) syntax testing
21. Q21ada la siguiente types of tool, which tools would typically be used by developers, y which by an
independent system test team?
i. static analysis
iv.ynamic analysis
23. Q23 ¿Cuál de los siguientes statements about component testing is FALSE?
a)lack box test design techniques all have an associated test measurement technique
b) white box test design techniques all have an associated test measurement technique
d)lack box test measurement techniques all have an associated test design technique
25.
26. Q25 typical commercial test execution tool would be able to perform all of the following, EXCEPT:
a) re-testing ensures the original fault has been removed; Pruebas de Regresión looks for unexpected
side-effects
b) re-testing looks for unexpected side-effects; Pruebas de Regresión ensures the original fault has been
removed
c) re-testing is done after faults are fixed; Pruebas de Regresión is done earlier
a) walkthrough
b) inspection
c) management review
a)omponent testing
d) PRINCIPALtenance testing
31. Q30 What is NOT included in typical costs for an inspection process?
33. Q32 Which expression best matches the following characteristics of the review processes:
1. led by the author
2. undocumented
3. no management participation
s) inspection
t) peer review
u) informal review
v) walkthrough
a) s = 4 y 5, t = 3, u = 2, v = 1
b) s = 4, t = 3, u = 2 y 5, v = 1
c) s = 1 y 5, t = 3, u = 2, v = 4
d) s = 4 y 5, t = 1, u= 2, v = 3
c) usability testing
b) expected outcomes are derived from a especificación , not from the code
36. Q35 The standard that gives definitions of testing terms is:
a) ISO/IEC 12207
b)S 7925-1
c)NSI/IEEE 829
d)NSI/IEEE 729
a) is not important
38. Q37 ¿Cuál de los siguientes is NOT included in the Test Plan document of the Test
Documentation Standard?
c) quality plans
d) schedules y deadlines
39.
b) recovery testing
a) an error
b) a fault
c) a failure
d) a defect
e) a mistake
v) every week
3. IEEE 829 test plan documentation standard contains all of the following except
a) test items
b) test deliverables
c) test tasks
d) test environment
e) test especificación
4. Testing should be stopped when
d) both a) y c)
5. Order numbers on a stock control system can range between 10000 y 99999
inclusive. ¿Cuál de los siguientes inputs might be a result of designing tests for only
ii. faults found during early test design are more expensive to fix
d) testing a system feature using only the software required for that function
9. ¿Cuál de los siguientes is the PRINCIPAL purpose of the component build y integration
strategy?
iv. the incident record does not include information on test environments.
v. incidents should be raised when someone other than the author of the
12. Dada la siguiente code, which is true about the MINIMO number of test cases
Read P
Read Q
IMPRIMIR "Large"
FIN DEL SI
IF P > 50 THEN
FIN DEL SI
b) testing by users to check that the system will perform business functions
c) testing that the components that comprise the system function together
a) requirements
b) documentation
c) on-line help
d) test cases
a) Software
b) operating systems
c) test documentation
d) live data
b) complex code
a) Partición de Equivalencia
c) LCSAJ
d) syntax testing
21. Dada la siguiente types of tool, which tools can typically be used by developers, and
i. static analysis
v. test running
d) black box measurement techniques all have an associated test design technique.
e) white box measurement techniques all have an associated test design technique.
25. A typical commercial test execution tool would be able to perform all of the following,
EXCEPT:
a) re-testing is running a test that found a fault; Pruebas de Regresión looks for unexpected
side-effects
b) re-testing looks for unexpected side-effects; Pruebas de Regresión is repeating those tests
c) re-testing is done after faults are fixed; Pruebas de Regresión is done earlier
d) re-testing uses different environments, Pruebas de Regresión uses the LA MISMA environment
28. What type of review requires formal entry y exit criteria, including metrics:
a) informal review
b) walkthrough
c) inspection
d) management review
a) component testing
e) PRINCIPALtenance testing
32. Which expression best matches the following characteristics of the review processes:
2. undocumented
3. no management participation
s) inspection
t) peer review
u) informal review
v) walkthrough
a) s = 4, t = 3, u = 2 y 5, v = 1
b) s = 4 y 5, t = 3, u = 2, v = 1
c) s = 1 y 5, t = 3, u = 2, v = 4
d) s = 5, t = 4, u = 3, v = 1 y 2
e) s = 4 y 5, t = 1, u= 2, v = 3
33. ¿Cuál de los siguientes is NOT part of Pruebas de Sistema?
c) requirements-based testing
d) usability testing
b) expected outcomes are derived from a especificación , not from the code
a) ISO/IEC 12207
b) BS7925-1
c) BS7925-2
d) ANSI/IEEE 829
e) ANSI/IEEE 729
a) is not important
Documentation Standard?
c) Test environments
d) Quality plans
e) Schedules y deadlines
c) recovery testing
c) by inexperienced testers
1) C
2) C
3) E
4) E
5) C
6) A
7) B
8) B
9) C
10) E
11) B
12) B
13) E
14) D
15) E
16) D
17) C
18) C
19) C
20) A
21) B
22) D
23) A
24) D
25) A
26) A
27) D
28) C
29) E
30) D
31) C
32) B
33) E
34) A
35) B
36) B
37) D
38) D
39) C
40) B
Sample Paper - 1
ii.etermining the test approach (techniques,test items, coverage, identifying y interfacing the teams involved in
testing , testware)
4. One of the fields on a form contains a text box which accepts alphabets in lower or upper case.
Indentify the INVALIDOEquivalance class value.
a.LASS
b.LASS
c.Lass
d.La01ss
An employee has S/. 4000 of salary tax free. The next S/. 1500 is taxed at 10% The next S/. 28000 is taxed at
22% Any further amount is taxed at 40% Which of these groups of numbers would fall into the LA MISMA
equivalence class?
a) S/. 4800; S/. 14000; S/. 28000
6. ¿Cuál de los siguientes has highest level of independence in which test cases are :
7. We use the output of the requirement analysis, the requirement especificación as the input for writing
:-
d) Program especificación s
a)omponent testing
d) PRINCIPALtenance testing
Conditions
Actions
Ofrecer actualización a Gold Luxury Yes No No No
10.
11. Repeated Testing of an already tested program, after modification, to discover any defects introduced
or uncovered as a result of the changes in the software being tested or in another related or unrelated
software component:
a) Re Testing .
b) Confirmation Testing
c) Pruebas de Regresión
d) Negative Testing
b) Exit Criteria
b) testing that the components that comprise the system function together
a) OFF to ON
b) ON to OFF
c) FAULT to ON
15. Peer Reviews are also called as :-
a) Inspection
b) Walkthrough
c) Technical Review
d) Formal Review
17. The Kick Off phase of a formal review includes the following :-
c) Follow up
19. ¿Cuál de los siguientes is not phase of the Fundamental Test Process?
c) Requirement Analysis
c) syntax testing
c) i , iii , iv , ii is in correct
d) ii is correct
a) i , ii,iii,iv is correct
d) iv, ii is correct
a) Especificación s
b) Test Cases
c) Test Data
d) Test Design
24. ¿Cuál de los siguientes is true about White y Black Box Testing Technique:-
a) Equivalance partitioning, Decision Table y Control flow are White box Testing Techniques.
b) Partición de Equivalencia , Boundary Value Analysis , Data Flow are Black Box Testing Techniques.
c) Partición de Equivalencia , State Transition , Pruebas de Caso de Uso are black box Testing Techniques.
d) Equivalence Partioning , State Transition , Pruebas de Caso de Uso y Decision Table are White Box
Testing Techniques.
i. every week
Read P
Read Q
IMPRIMIR “Large”
End if
If p > 50 then
IMPRIMIR “pLarge”
End if
isc = 0
Order-qty = 0
Read Order-qty
isc = 0.05
isc =0.1
End if
End if
a) Statement coverage is 4
b) Statement coverage is 1
c) Statement coverage is 3
d) Statement Coverage is 2
29. The structure of an incident report is covered in the Standard for Software Test Documentation IEEE
829 y is called as : -
a)nomaly Report
b)efect Report
c) Test Defect Report
i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project.
ii. Write Test Summary Reports based on the information gathered during testing
i. We use explicit knowledge of the internal workings of the item being tested to select the test data.
ii. Uses specific knowledge of programming code to examine outputs y assumes that the tester knows
the path of logic in a unit or a program.
iv.nalyzing lessons.
33. ¿Cuál de los siguientes will be the best definition for Testing :-
c) The purpose of testing is to demonstrate that the program does what it is supposed to do.
a) Top down
b)ig-bang
c)ottom up
d) Functional incrementation.
i. Spade
iii. Scaffolding
iii. Residual risk such as defects not fixed or lack of test coverage in certain areas
i. Risk of Failure of the Project, hazards to the product y risks of product failure to humans
ii. Skills y experience of the people in the proposed technique, tools y methods
iii. The objective of the testing endeavor y the mission of the testing team.
40. The Provision y Management of a controlled library containing all the configurations items is called as
a)onfiguration Control
b) Status Accounting
c)onfiguration Identification
d)onfiguration Identification
Sample-1
nswer Key
1 11 21 31
2 12 22 32
3 13 23 33
4 14 24 34
5 15 25 35
6 16 26 36
7 17 27 37
8 18 28 38
9 19 29 39
10 20 30 40
Sample Paper - 2
41.esigning the test environment set-up y identifying any required infrastructure y tools are a part of which
phase
42. Implementación y ejecución de Pruebas has ¿Cuál de los siguientes major tasks?
i.eveloping y prioritizing test cases, creating test data, writing test procedures y optionally preparing the test
harnesses y writing automated test scripts.
ii.reating the test suite from the test cases for efficient test execution.
iii. Verifying that the test environment has been set up correctly.
i. Test Items
iv. Responsibilities
44. One of the fields on a form contains a text box which accepts numeric values in the range of 18 to 25.
Indentify the INVALIDOEquivalance class
a) 17
b) 19
c) 24
d) 21
45. In a Examination a candidate has to score MINIMO of 24 marks inorder to clear the exam. The
maximum that he can score is 40 marks. Identify the Valid Equivalance values if the student clears the exam.
a) 22,23,26
b) 21,39,40
c) 29,30,31
d) 0,15,22
v. Unit Testing
d) PRINCIPALtenance testing
50.
Conditions
Actions
b) Retesting
c)onfirmation Testing
d) Sanity Testing
53. The Phases of formal review process is mentioned below arrange them in the correct order.
i. Planificación
iii. Rework
v. Kick Off
vi. Follow Up
a) i,ii,iii,iv,v,vi
b) vi,i,ii,iii,iv,v
c) i,v,iv,ii,iii,vi
d) i,ii,iii,v,iv,vi
54.onsider the following state transition diagram of a two-speed hair dryer, which is operated by pressing its
one button. The first press of the button turns it on to Speed 1, second press to Speed 2 y the third press turns
it off.
¿Cuál de los siguientes series of state transitions below will provide 0-switch coverage?
a.,C,B
b.,C,A
c.,B,C
d.,B,A
a) Structural Testing
b)n input or output range of values such that only one value in the range becomes a test case
c)n input or output range of values such that each value in the range becomes a test case
d)n input or output range of values such that every tenth value in the range becomes a test case.
a)re most useful in uncovering defects in the process flows during real world use of the system
b)re most useful in uncovering defects in the process flows during the testing use of the system
c)re most useful in covering the defects in the process flows during real world use of the system
b) Is practically possible
c) Is impractical y impossible
d) Is always possible
59. ¿Cuál de los siguientes is not a part of the Implementación y ejecución de Pruebas Phase
a) Organizational Factors
vii. Implement Tests on all test levels, execute y log the tests.
c) Follow up
65. Person who documents all the issues, problems y open points that were identified during a formal review.
a) Moderator.
b) Scribe
c) Author
d) Manager
66. Who are the persons involved in a Formal Review :-
i. Manager
ii. Moderator
iv.ssistant Manager
d) Includes Metrics
c) memory leaks
a) requirements
b)ocumentation
c) test cases
70. Type of functional Testing, which investigates the functions relating to detection of threats, such as virus
from malicious outsiders.
a) Security Testing
b) Recovery Testing
c) Performance Testing
d) Functionality Testing
a)hecking test logs against the exit criteria specified in test Planificación.
72. Testing where in we subject the target of the test , to varying workloads to measure y evaluate the
performance behaviors y ability of the target y of the test to continue to function properly under these
different workloads.
a) Load Testing
b) Integration Testing
c) Pruebas de Sistema
d) Usability Testing
73. Testing activity which is performed to expose defects in the interfaces y in the interaction between
integrated components is :-
d)omponent Testing
75. One of the fields on a form contains a text box which accepts alpha numeric values. Identify the Valid
Equivalence class
a)OOK
b)ook
c)oo01k
d)ook
a) operating systems
b) test documentation
c) live data
a) 12,16,22
b) 24,27,17
c) 22,23,24
d) 14,15,19
Sample-2
nswer Key
1 11 21 31
2 12 22 32
3 13 23 33
4 14 24 34
5 15 25 35
6 16 26 36
7 17 27 37
8 18 28 38
9 19 29 39
10 20 30 40