Documentos de Académico
Documentos de Profesional
Documentos de Cultura
elevision programming Programming Device press “ ” button till the TV turnoff, lock on working for TV. Introduccion Apaga/Enciende el dispositivo
Muestra la Guia de programacion del
dia anterior/despues
» Modo de Búsqueda Automática
CableOnda The CableOnda remote control » Default Setting and then release all buttons. 2. Press & hold “ ” + “ ” buttons Gracias por subscribirse al servicio de Si no puede encontrar el número de
Replay the previous few seconds of a Canal pre-programado al 701
requires two AA Batteries. To install program (only available with DVR TV: LG 4. Please test other function keys till the LED flashes 2 times, release Cable de Cable Onda . Este manual ( Facturacion) 4 dígitos correcto después de probar
models) Teclado numerico
the batteries CBL: Motorola under TV working or not. If working all buttons, the Volume de usuario le indicaran como varias veces, utilice la búsqueda
Swap the PIP signal to the main
display (if available) no properly, please repeat step released & return to work for CBL programar su control remoto modelo
Selecion de video
automática para localizar el código
Display a list of program that you » Code Input Setting 1 – 3 to locate the correct codes. (default status) GDCT-890 para que funcione con su Cambiar tamaño de panatalla correcto:
recorded. This will allow you to select
1. Turn on the TV Power. TV y caja de cable. Pausa.Stop Play/ Grabar/Rew/Fast 1. Encienda el dispositivo de TV que
one for viewing (only available with
Note: If not keys pressed in 30 Composite Keys Forward
va a controlar.
DVR models)
2. Locate the 4 digit code corresponding Regresa al ultimo canal selecionado
Exit any on-screen display (OSD) and to your device in the code list. seconds, the LED will light off to exit Please press the following composite Instalacion de Bateria 2. Presione la tecla “ ” hasta que el
1. Remove the battery cover. return to regular viewing
the setting mode. keys to operate different STBs: Su control Cable Onda reuiere 2 Muestra Television Live LED se encienda Suelte todos los
3. Press “ ” button till the LED light
1) Pressing “ ” + “ ”, the remote
Configuración de Fabrica
Direct access to Video on Demand baterias AA. Para instalar las baterias : botones.
2. Insert the batteries, matching the up, and then release all buttons. Repite los ultimos segundos del
TV LG
(VOD), where available
Your Favorite works for Motorla programa ( solo disponible con
3. Apunte el control remoto al
batteries to the (+) and (-) marks 4. Input the 4 digital numbers you modelos de DVR)
CBL Motorola
Display channel and program
For future reference, please write 2) Pressing “ ” + “ ”, the remote dispositivo (TV), oprima “ ”
inside the battery compartment. information choose from the code list, the LED works for Cableonda MMDS
Cambia la señal PIP a la pantalla