Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Y EXPLORACIÓN PETROLERA
OIL DRILLING AND
EXPLORATION HOSES
TM
TM
Las mangueras para perforación y exploración petrolera Dunlop Argentina S.A. has been developing oil
son desarrolladas por Dunlop Argentina S.A. desde hace perforation and explorations hoses for more than 40
más de 40 años, conforme los avances tecnológicos y years, in accordance with technological advances and
los mejores materiales del mercado, cumpliendo con las using the best materials in the market, fulfilling the
especificaciones del Instituto Americano del Petróleo specifications of the American Petroleum Institute (API)
(API) y el Sistema de Calidad ISO 9001. Las and the ISO Quality System 9001. Such certifications
certificaciones obtenidas permiten el uso del allow the use of the API monogram on hoses according to
monograma API sobre las mangueras según la the corresponding specification API Spec. (7K-16C).
especificación API Spec. (7K – 16C) que corresponda.
The main applications of rotary hoses are:
Las principales aplicaciones son: - Injection of mud from the feeding tube to the swivel
- Inyección de lodo desde el tubo de alimentación al hook.
gancho giratorio. - Injection of mud from the tank, through the bomb to the
- Inyección de lodo desde la pileta a través de la bomba a pipe and its return.
la tubería y su retorno. - Cushioning vibration between rigid connections of the
- Amortiguación de vibraciones entre conexiones installation.
rígidas de la instalación. - Water injection in coke towers within refineries.
- Inyección de agua en torres de coque en refinerías. - Cementation, acidification and well profiling.
- Cementación, acidificación y perfilado de pozos. - General Choke and Kill service.
- Servicios Choke and Kill .
These hoses are provided with threaded couplings, LINE
Estas mangueras se proveen con conexiones roscadas PIPE kind, according to API Spec 5B or welded
tipo LINE PIPE de acuerdo a API Spec. 5B, uniones couplings or flanges according to API Spec 6A. Terminals
soldadas o bridas de acuerdo a API Spec 6A. La can be Built-in or Swaged- on process to the hose.
vinculación de los terminales al cuerpo de la manguera
puede ser por vulcanización o por laminación. These general conditions added to the specific
conditions of each type and grade of application make us
Estas condiciones generales sumadas a las particulares proud of our Rotary hoses, and grant us a vast and
en cada tipo y grado de aplicación conforman de nuestra prominent positioning at a local as well as at an
manguera Rotary un orgullo que nos permite un amplio y international level.
destacado posicionamiento tanto a nivel local como
internacional.
Aplicación Application
Las mangueras Rotary Drilling y Rotary Vibrator The Rotary Drilling and Rotary Vibrator hoses provide a
suministran una conexión flexible entre el tubo o columna flexible connection between the tube or feeding tower
de alimentación y el gancho giratorio, entre la bomba de and the swivel hook, between the mud pump and the
lodo y el tubo de alimentación, respectivamente; feeding tube, respectively; allowing it to conduct and
permitiendo conducir e inyectar a elevada presión el lodo inject at high pressure the lubrication mud of the bit, in
de lubricación del trépano en los trabajos de perforación perforation and exploration tasks.
y exploración.
Built-in Couplings
Grade ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP FSL Temp Range
50 2,0 104,0
64 2,5 116,7
C 76 3,0 130,2 4000 8000 2,5 10000 1 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
50 2,0 104,0
64 2,5 116,7
D 76 3,0 130,2 5000 10000 2,5 12500 1 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
64 2,5 125,7
E 76 3,0 139,2 7500 15000 2,5 18750 1 -20Cº/+82Cº
89 3,5 152,9
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
API Spec. 7K Standard - “Longitud máxima 47,25 Mts” - “Maximum length 155 Ft”
Aplicación Application
Las mangueras Rotary Drilling y Rotary Vibrator The Rotary Drilling and Rotary Vibrator hoses provide a
suministran una conexión flexible entre el tubo o columna flexible connection between the tube or feeding tower
de alimentación y el gancho giratorio, entre la bomba de and the swivel hook, between the mud pump and the
lodo y el tubo de alimentación, respectivamente; feeding tube, respectively; allowing it to conduct and
permitiendo conducir e inyectar a elevada presión el lodo inject at high pressure the lubrication mud of the bit, in
de lubricación del trépano en los trabajos de perforación perforation and exploration tasks.
y exploración.
Swaged-on Couplings
Grade ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP FSL Temp Range
50 2,0 104,0
64 2,5 116,7
C 76 3,0 130,2 4000 8000 2,5 10000 2 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
64 2,5 110,7
76 3,0 126,0 5000 10000 2,5 12500 2 -20Cº/+82Cº
D 89 3,5 138,7
101 4,0 161,0
76 3,0 133,4
E 89 3,5 146,1 7500 15000 2,5 18750 2 -20Cº/+82Cº
101 4,0 168,4
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
API Spec. 7K Standard - “Longitud máxima 47,25 Mts” - “Maximum length 155 Ft”
Aplicación Application
Especialmente diseñada para operaciones de Specially designed for cementing and acidizing
cementación y acidificación. operations.
Built-in Couplings
Grade ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP FSL Temp Range
50 2,0 104,0
64 2,5 116,7
CEMENT 76 3,0 130,2 4000 8000 2,5 10000 0 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
50 2,0 104,0
CEMENT 64 2,5 116,7
76 3,0 130,2 5000 10000 2,5 12500 0 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
64 2,5 125,7
CEMENT 76 3,0 139,2 7500 15000 2,5 18750 0 -20Cº/+82Cº
89 3,5 152,9
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
API Spec. 7K Standard - “Longitud máxima 47,25 Mts” - “Maximum length 155 Ft”
Aplicación Application
Especialmente diseñada para operaciones de Specially designed for cementing and acidizing
cementación y acidificación. operations.
Swaged-on Couplings
Grade ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP FSL Temp Range
50 2,0 104,0
CEMENT 64 2,5 116,7
76 3,0 130,2 4000 8000 2,5 10000 0 -20Cº/+82Cº
89 3,5 143,9
101 4,0 165,6
64 2,5 110,7
CEMENT 76 3,0 126,0
5000 10000 2,5 12500 0 -20Cº/+82Cº
89 3,5 138,7
101 4,0 161,0
76 3,0 133,4
CEMENT 89 3,5 146,1 7500 15000 2,5 18750 0 -20Cº/+82Cº
101 4,0 168,4
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
API Spec. 7K Standard - “Longitud máxima 47,25 Mts” - “Maximum length 155 Ft”
Aplicación Application
Empleada para aplicaciones en equipos de taladrado Employed for applications on portable drilling rigs, work-
portátil, equipos work-over, equipos slim hole y equipos over rigs, slim hole and seismograph rigs.
de sismógrafo. Designed to operate at a maximum of 3000 PSI working
Diseñada para operar a un máximo de presión de trabajo pressure.
de 3000 PSI.
Swaged-on Couplings
ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP FSL Temp Range
64 2,5 98,1
76 3,0 110,8 3000 6000 2,5 7500 -20Cº/+100Cº
101 4,0 143,6
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
Aplicación Application
Es empleada como conexión flexible entre el Choke & Kill It is used as a flexible connection between the Choke &
manifold y la válvula BOP, tanto en aplicaciones on-shore Kill manifold and BOP valve, on applications, on-shore
y off-shore. and off-shore.
Swaged-on Couplings
ID (mm) ID (inch) OD (mm) WP TP Safety Factor MBP Temp Range
50 2,0 95,2
76 3,0 126,2 5000 10000 2,5 12500 -20Cº/+121Cº
89 3,5 139,1
101 4,0 161,2
50 2,0 102,2
76 3,0 137,0 10000 20000 2,5 22500 -20Cº/+121Cº
89 3,5 149,9
101 4,0 173,3
Nota: ID: Inner Diameter - OD: Outer Diameter - WP: Work Pressure - TP: Test Pressure
MBP: Minimum Burst Pressure
API Spec. 16C Standard - “Longitud máxima 47,25 Mts” - “Maximum length 155 Ft”
Grado Grade
www.dunlop.com.ar