Documentos de Académico
Documentos de Profesional
Documentos de Cultura
818 PDF
818 PDF
RESUMEN ABSTRACT
En este trabajo se pretende describir la reciente This paper attempts to describe the recently approved
aprobada normativa UNE, analizando sistemticamente UNE standards through a systematic analysis of the main
las principales prescripciones contempladas y los valores specifications therein contained and the values
considerados para cada una de ellas, as como los considered for each of them, as well as the drafts for ISO
proyectos de Norma ISO, y EN sobre bloques de and EN concrete block standards. Furthermore, the study
hormign. Asimismo se intenta situar la normativa UNE tries to place the set of ISO standards in the
en al mbito internacional, haciendo un anlisis international environment through a comparative
comparativo con una representacin de Normas de analysis against a representative sample of the standards
distintas regiones geogrficas del mundo, determinando prevailing in various geographical regions of the globe to
sus analogas y diferencias. determine the analogies and differences among them.
INTRODUCCIN INTRODUCTION
En este trabajo se estudia la normativa This paper studies the Spanish concrete block
espaola sobre bloques de hormign, standard through a descriptive analysis of its
realizando un anlisis descriptivo de sus requirements, as well as the standard drafts
prescripciones, as como las propuestas de ISO and EN, standard organisations of which
Normas ISO y EN, organizaciones de Spain is a part. It also compares the UNE
normalizacin en las que participa Espaa. standard with a sample of 10 international
Asimismo, se compara la Norma UNE con una standards in respect of requirements and
muestra de 10 Normas internacionales, en lo values with the purpose of being aware of
referente a prescripciones y valores what has been done in other countries and at
especificados para, a la vez que se conoce lo the same time contrasting the different
que en este sentido se ha realizado en otros solutions given to each problem.
pases, confrontar las diversas soluciones
dadas a cada cuestin.
Las Normas ISO sobre bloques de hormign ISO concrete block standards are presently
estn siendo en este momento desarrolladas being developed by ISO/TC 179 MASONRY
por el ISO/TC 179 MASONRY, que elabora las whic works on the following DP:
siguientes DP:
Las Normas EN sobre bloques de hormign The EN concrete block standard is now being
son abordadas en este momento por el developed by CEN/TC 125 l\/IASONRY whose
CEN/ TC 125 MASONRY, cuyo task group 3 task group 3 Concrete Units is writing a
Concrete units, elabora el documento regulatory document establishing the material,
normativo que establece los materiales, manufacture and physical/mechanical
manufactura y propiedades fsicas y properties to be met by normal and exposed
mecnicas que deben cumplir los bloques de concrete blocks with the following terminology:
hormign normales y cara vista, con
nomenclatura:
La situacin existente en Espaa, en relacin The situation prevailing in Spain before the
a este sistema constructivo, previa a la preparation and experimental approval of UNE
elaboracin y aprobacin experimental de las standards in July 1989 was certainly
Normas UNE en Julio de 1989 era realmente precarious as only the NTE-EFB and NTE-FFB
precaria, solamente existan las Normas Technological Standards existed. The need
Tecnolgicas NTE-EFB y NTE-FFB. Era was evident to create a body of rules to cover
evidente la necesidad de crear un cuerpo de the existing legal void putting this system at
normas que, cubriendo el vaco legal existente, the same level as brick construction, for which
equiparara este sistema al de fbrica de there was since 1972 the MV-201 mandatory
ladrillo, sobre el cual ya desde 1972 exista basic rule, and to the international set of
una Norma bsica de obligado cumplimiento, standards.
MV-201, y a la normativa internacional.
En este sentido se cre en el A.E.N.O.R., In this respect, the technical committee 41 was
organismo fundado en 1986 como la entidad created within AENOR, an organisation
para desarrollar las tareas de normalizacin y founded in 1986 as the agency charged with
certificacin en Espaa, el comit tcnico 4 1 , standardisation and certification activities in
compuesto por representantes de ministerios, Spain. This technical committe 41, formed by
colegios profesionales, asociaciones representatives of several Ministries,
internacionales especializadas en trabajos de professional associations and other concerned
normalizacin y otras organizaciones organisations, has developed this set of
De esta manera se ha elaborado la Norma The committe has prepared the UNE 41166
UNE 41166, que clasifica por el tipo, standard that classifies concrete blocks by
categora, grado y/o uso, designa y fija las type, category, grade and/or use, designates
prescripciones que deben cumplir los bloques and establishes the requirements to be met by
de hormign y los materiales componentes, y concrete blocks and the component materials,
las Normas UNE (41167-41172) - v e r as well as the complementing 41167 and
Tabla 1 que la complementan, describiendo 41172 UNE standards (see Table 1), describing
los mtodos de ensayo a seguir para su the test methods to be performed for
caracterizacin. characterization.
TABLA 1 TABLE 1
Normativa UNE referente a bloques de hormign (UNE specifications for concrete masonry units)
NORMA UNE
(UNE STANDARD) TITULO (REFERENCES)
41167 Medicin de las dimensiones y comprobacin de la forma (Dimensions measurement and size
verification)
41168 Determinacin de la seccin bruta, seccin neta e ndice de macizo (Determination of gross
area, net area and solid index)
41169 Determinacin de la densidad real del hormign (Determination of concrete density)
41170 Determinacin de la absorcin del agua (Determination of water absorption)
41171 Determinacin de la succin (Determination of suction)
41172 Determinacin de la resistencia a compresin (Determination of compressive strength)
Las exigencias de la normativa UNE, como se The UNE standard specifications, as can be
puede apreciar en la Tabla 2, comprende una observed in Table 2, comprise a wide range of
amplia gama de prescripciones: caractersticas requirements: characteristics of aspect,
de aspecto, geomtricas (dimensiones geometric (modular dimensions, dimensional
modulares, tolerancias dimensionales, tolerances, thicknesses, etc.) physical
espesores, etc.), fsicas (absorcin, succin), (absorption, suction), mechanical, thermical,
mecnicas, trmicas, acsticas y de accoustic and fire resistence.
resistencia al fuego.
Basndose en estas Normas UNE, por Orden Based on these UNE standards, the f\Ainisterial
de 4 de Julio de 1990, se aprueba el "Pliego Order of 4 July, 1990 approved the "Sheet of
de prescripciones tcnicas generales para la General Technical Specifications for the
recepcin de bloques de hormign en las Acceptance of Concrete Blocks in
obras de construccin (RB-90)", que entrar Construction works (RB-90) that will be in
en vigor a los seis meses de su publicacin en force six months after its publication in the
el Boletn Oficial del Estado, el 11 de Julio de Official State Bulletin, i.e., on 11 July, 1990.
1990. Tiene por objeto establecer las The object of this document is to establish
prescripciones tcnicas que han de reunir los technical specifications to be met by concrete
bloques de hormign para su recepcin en las blocks delivered in construction works, the
obras de construccin, los mtodos de ensayo test methods to determine their characteristics
para determinar sus caractersticas y el and the general reception procedure,
procedimiento general de recepcin, siendo mandatory in any construction project financed
de obligatoria observancia a todas las obras in whole or in part by the State.
de construccin, en cuya financiacin participe
la Administracin del Estado.
Espe-
Resis- Absorcin mxima sor de
tencia (Absorption max) Suc- paredes
a com- cin a y tabi-
Tolerancia quillos ndice
presin 5 mits dimensional
(Com- (Dimen- Fecha mxima macizo
pressi- (Suc- (Dimensional sional (Deflection max) (Solid
Tipo de ve tion a tolerance) Shell index)
bloque stren- D 1900 5 mits) and
1600 D
gth) wed
(Type of > D D < thick-
block) 1900 1600 1300 1300 ness)
Reves- Reves-
C. vista C. vista
tido tido
MPA g/cm3 g/cm3 g/cm3 g/cm3 g/cm2 (Not mm (Not P
(Fa- (Fa-
facing) facing)
cing) cing)
Bloque
estructural 15
12
(Hllow 10 0.23 0.24 0.29 + 2 + 3 > 20 < 1.5 >3 N0<
0.29 0.05-0.1
load-bearing 8
block) 6
Bloque
cerramiento
(External 5
0.21 0.24 0.29 0.29 0.05-0.1 + 2 + 3 > 20 < 1.5 <3 AL
non-load 4
Bearing)
Bloque
divisin
3
(internal
0.32 0.05-0.1 + 2 + 3 > 20 < 1.5 <3 Nominal
non-load 2.5
bering)
Mtodo de
ensayo
nornja UNE
(UNE 41172 41170 41171 41167 41167 41167 41168
mettiods
test)
El objeto principal de este apartado es Tlie main object of tliis section is to compare
comparar las prescripciones fundamentales de tiie basic specifications of tfie UNE standard
la Norma UNE as como de sus valores and its specific values, determining tfie
especificados, determinando analogas y analogies and differences against a sampling
diferencias con una muestra de Normas de of standards in use in otiier countries on tfie
otros pases sobre el tema. same subject
TABLA 3 TABLE 3
Comparacin norma UNE con normativa nacional de otros pases
(UNE standard comparation with othercontrees rationaz standards)
Organismo de
normalizacin
(Pas)
Normas nacionales sobre bloques de hormign (Concrete blocks national standards)
[Standarization
organism u
(country)]
Con objeto de sistematizar el trabajo se The relevant specifications are listed below in
enumeran estas prescripciones, de la manera order to present this work in a systematic
que a continuacin se indica: fashion.
ABSORCIN ABSORPTION
ndice que representa el grado de compacidad This criterion represents the level of
0 porosidad del hormign. Es una prescripcin compaction or porosity of the concrete. This is
que se incluye en la casi totalidad de la a specification found in most standards
normativa estudiada, con un tratamiento studied, but differently treated in the several
diferente en los diversos grupos analizados. groups investigated.
25-
20H
5H
Promedio de
SI absorcin.
104 J1 YES (Absorption
average).
Wio%,1
40%
1 ft
^ 3 0 % ^
Grfico 2.--Absorcin. Nmero de normas 10. Graphic 2.Absorption. Standards number 10.
Grfico 3.Succin. Nmero de normas 10. Graphic 3.Suction. Standards number 10.
1. Resistencia en funcin del uso del bloque 1. Strength in terms of block usage
kp/cnn^
200
1604
120H
SI Promedio bloques
BOH YES estructurales.
(Load-bearing
blocks average).
Promedio bloques
4 0H cerramiento.
(External non load
bearing block average).
Grfico 5.Resistencia a compresin. Nmero de nor- Graphic 5.Compressive strength. Standards number 10.
mas 10.
Bloque macizo, con un ndice p > 0,80 Solid block, with a solid proportion p> 0.80 to
debe tener una resistencia mnima a have a minimum compressive strength of
compresin de 80 kp/cm2 para su uso en 80 kp/cm^ when used in structural walls.
muros estructurales.
Bloque hueco, con un ndice de macizo de Hollow block, with a solid proportion of
0,80 > p > 0,25 debe tener una resistencia 0.8 > p > 0.25 to have a minimum
mnima a compresin de 60 kp/cm2 para compressive strength of 60 kp/cm^ when
muros estructurales. used in structural walls.
Bloques de hormign normal, S > 1.700 Standard concrete blocks, 8 ^ 1.700 g/cm^ for
g/cm3 deben tener una resistencia para structural use, to have a 40-80 kp/cm^ strength
uso estructural de 40-80 kp/cm2 cuando for hollow blocks and higher than 80 kp/cm^
son huecos, y por encima de 80 kp/cm2 for solid blocks.
cuando son macizos.
C O N T E N I D O DE HUMEDAD MOISTURE C O N T E N T
ndice que proporciona una medida de las This criterion provides a measurement of the
condiciones del bloque para su utilizacin y, block use condition and its variations are the
debido a su variacin, es el principal causante main cause of cracked walls. The ideal
de las grietas que aparecen en los muros. El moisture content shall be near the average
contenido de humedad ideal de los bloques es atmospheric humidity existing in the use area.
aproximarse al valor de la humedad promedio
del ambiente en que se van a utilizar.
4CH M
30H
NO
Nor
2CH
10-
Grfico 7.Contenido de humedad. Nmero de normas 10. Graphic 7.Moisture content. Standards number 10.
%
OJ
0.08-
0,06H
SI
YES
0,04H
0,02^
Grfico 9.Contraccin lineal. Nmero de normas 10. Graphic 9.Linear contraction Standards number 10.
Observando el grfico 10, en el que se indican Observing graphics 10, where standards are
las Normas que contemplan, entre sus shown that include in their specifications some
prescripciones, ciertas adiciones que como las additives, such as fly ash, intented to improve
cenizas volantes pueden mejorar y favorecer performance, it can be noted that this
algunas prestaciones, se puede comprobar requirement is present in 50 % of the
que este requerimiento est presente en un standards under study, including the EN
50 % de la normativa analizada, incluyendo la standard. 40 % of these standards (IRAM,
Especificada (Specifity) 50 %.
Sin especificar fA/on specifity) 40 % (UNE).
Sin contemplar CA/on examined) 10 %.
Grfico lO.Adicin de cenizas volantes. Nmero de normas 10. Graphic 10.Fly-ash admixture. Standards number 10.
CONCLUSIONES CONCLUSIONS
Se puede observar que el sistema constructivo, It can be seen that this constructive system,
albailera a base de bloques de hormign, ya concrete block masonry, already possess an
tiene un marco normativo adecuado dentro de adequate standard framework in the Spanish
la legislacin espaola y prximamente en la regulations and soon in the EEC legislation
comunitaria, por lo cual las entidades y also. Therefore, organisation and individuals
personas relacionadas con el sector de la connected to the construction industry will
construccin tendrn que adaptarse a la have to adapt to the vocabulary and contents
terminologa y contenido de la legislacin of the national legislation as well as EEC
nacional, as como a las previsiones provisions, until recently insufficiently
comunitarias, hasta tiempo reciente poco developed, to enter in the present strong
desarrolladas, entrando en la actualidad en development stage.
una fase de gran impulso.
Se puede deducir, observando las distintas From an examination of the different standards
Normas consultadas, que cada una de ellas es under study one can deduce that each of them
la respuesta a una necesidad especfica de un responds to a specific need in its country and
pas y responde a un proceso de elaboracin answers to that country's own manufacturing
propio. Sin embargo, analizando cada una de process. This notwithstanding, if each
las prescripciones en las diversas Normas y specification in the standards is carefully
relacionndolas entre s, se descubren analysed and then all are compared, common
patrones comunes generalmente coincidentes patterns emerge generally related to the
con los mbitos geogrficos seleccionados. selected geographical areas.
BIBLIOGRAFA
(1) ASTM-C-90: Hollow load-bearing concrete masonry units. U.S.A.
(2) ASTM-C-129: Non load-bearing concrete masonry units. U.S.A.
(3) ASTM-C-145: Solid load-behng concrete masonry units. U.S.A.
(4) CSA-A-165-1: Standars concrete masonry units. Canad.
(5) CSA-A-251: Quantification code for manufacture of architectural and structural precast concrete. Canad.
(6) BS-6073: Precast concrete masonry units. Reino Unido.