Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1987.
LUYBEN, William. "Process Modeling, Simulation and Control for Chemical
1996.
OGATA, Katsuhiko. "Ingeniera de Control Moderna". Prentice-Hall, pg. 194-
261,1993.
HIMMELBLAU, David. "Anlisis y Simulacin de Procesos". Editorial Reverte, pg.
441-496, 1992.
harriot, Peter. "Process Control". McGraw-Hill, pg. 216-333, 1985
Ingham, J., Dunn, I.J., Keinzle, E., Prenosil, J.E., Snape, J.B. Chemical Engineering
Dynamics: an Introduction to Modelling and Computer Simulation, WILEY-VCH
Verlag, Weinheim (2007). BUO ref.: VD66 INGH, otras ediciones QE681-050, QE681-066,
QE681-068
Roffel, B., Betlem, B., Process Dynamics and Control: modeling for control and
prediction. Wiley (2006)
Bequette, B.W., Process Dynamics: Modeling, Analysis and Simulation, Prentice Hall,
New Jersey (1998). BUO ref.: QE66-463
Cutlip, M.B., Shacham, M., Resolucin de Problemas en Ingeniera Qumica y
Bioqumica con Polymath, Excel y MATLAB, Pearson-Prentice-Hall (2008). Versin
Elnashaie, A., Uhlig, F., Numerical Techniques for Chemical and Biological Engineers
using MATLAB, Springer, New York (2007)
CO: Considine, D.M., and Considine, G.D., "Process Instruments and Control
Handbook", McGraw-Hill (1985). BUO ref.: QE66-356
R.C.. Dorf & R.H. Bishop Sistemas de Control Moderno. Pearson Prentice Hall, 2005.
Advanced PID Control. K. Astrm, T. Hgglund. ISA-The Instrumentation, Systems,
and Automation Society, 2006.
K. Ogata Problemas de Ingeniera de Control utilizando Matlab.. Prentice-Hall, 1999.
L. Moreno, S. Garrido, C. Balaguer. Ingeniera de control. Modelado y control de
sistemas dinmicos. Ariel Ciencia, 2005.
G.C. Goodwin, S.F.Graebe, M.E. Salgado Control System Design. Prentice Hall, 2001.
C. Angulo, C. Raya Tecnologa de sistemas de control.. Ediciones UPC, 2004.
G.F.Franklin, J.D.Powell, M.Workman Digital Control of Dynamic Systems. Addison
Wesley, 1998.
Distefano, Stubberud and Williams "RETROALIMENTACIN Y SISTEMAS DE
CONTROL". Schaum-Mcgraw-Hill. 1992
Lewis, P., Yang, C., Sistemas de control en ingeniera, Prentice Hall, 1999
Woods, R., Lawrence, K., Modeling and simulation of dynamic systems, Prentice Hall,
1997
Wayne Bequete, B., Process dynamics. Modeling, analysis and simulation, Prentice
Hall, 1998
Astrm, K., Hgglund, T., Avandec PID control, Isa, 2006
Astrm, K., Witternmark, B., Computer controlled systems, Prentice Hall, 1997
Skogestas, S., Postlethwaite, I., Multivariable feedback control, John Wiley & Sons,
2005
Van den Bosch, P., Van der Klauw, Modeling, identification and simulation of dynamical
systems
Camacho, E. F. ; Bordons, C., Model Predictive Control, Springer Verlag, 2003
Recursos en red y otros recursos
Comit Espaol de Automtica CEA
http://www.cea-ifac.es/noticias/noticias/
RIAI: Revista Iberoamericana de Automtica e Informtica Industrial
http://riai.isa.upv.es/
ISA Seccin Espaola
http://www.isa-spain.org/
Revista Automtica e Instrumentacin
http://www.grupotecnipublicaciones.com/publicaciones/automatica-einstrumentacion.html
IEEE Control Systems Society
http://www.ieeecss.org/main/
Solar, I. & Prez, R. Control automtico de procesos qumicos, 2 ed. Ediciones
Universidad Catlica de Chile, 1998.
Astrom, K. J. & Bjorn Wittenmark, B. Computer Controlled Systems: Theory & Design.
Englewood Cliffs, Prentice-Hall, 1984.
Brosilow, C. & Joseph, B. Techniques of Model-Based Control. Prentice-Hall, 2002.
Denn, M.M. Process Modeling. New York & London, Longman, 1986.
Isermann, R. Digital Control Systems. Berlin, Springer-Verlag, 1981.
Ogata, K. Discrete-Time Control Systems. 2nd ed. Englewood Cliffs,Prentice-Hall, 1995.
Ogunnaike, B., & Ray, R. Process Dynamics, Modeling, and Control. New York, Oxford
University Press, 1994.
Seborg, D., et. al. Process Dynamics and Control. New York, John Wiley & Sons, 1989.
Solar, I. & Prez, R. Control automtico de procesos qumicos, 1 ed. Santiago, Ediciones
Universidad Catlica de Chile, 1993.
Luyben, W. L. & Luyben, M. L., Essentials of Process Control, New York, McGraw-Hill,
1997.
Luyben, W. L., Process Modeling, Simulation, and Control for Chemical Engineers, 2nd
Edition, New York, McGraw-Hill, 1990.
Seborg, D. E., Edgar, Th. F., Mellichamp, D. A., Process dynamics and control, New
York, John Wiley and Sons, 1989.
Coughanowr, D. R., Process Systems Analysis and Control, 2nd Edition, New York,
McGraw-Hill, 1991.
Bequette, B. W., Process Dynamics: Modeling, Analysis, and Simulation, Upper Saddle
River, N.J., Prentice-Hall, 1998.
Erickson, K. T., & J. L., Hedrick, Plant Wide Process Control, New York, Wiley, 1999.
Marlin, T. E., Process Control: Designing Processes and Control Systems for Dynamic
Performance, New York, McGraw-Hill, 1995.
A. Pollard. Process control. Helnemann Educational Books., J.M. Douglas. Process
dymalcs and control. Vol. I y II Prentice Hall.,Stephanppoulos (Lectura recomendada).
K.J. Astrm y B. Wittenmark. Sistemas Controlados por Computador. Paraninfo, 1988.
K.J. Astrm and B. Wittenmark. Adaptive Control. Addison Wesley, 1989.
J.G. Balchen and K.I. Mumm. Process Control. Structures and applications. Van
Nostrand Reinhold, 1988.
E.F. Camacho and C. Bordons. Model Predictive Control in the Process Industry.
Springer Verlag, 1995.
E.F. Camacho and C. Bordons. Model Predictive Control. Springer Verlag, 1999.
G.F. Franklin, D. Powell and M.L. Workman. Digital Control of Dynamic Systems.
Addison Wesley, 1990.
A. Jimnez et al. Curso de Control Inteligente de Procesos. Seccin de Publicaciones de
la Escuela Tcnica Superior de Ingenieros Industriales. Universidad Politcnica de Madrid,
1993.
W.S. Levine. The Control Handbook. CRC Press-IEEE Press, 1996.
A. Ollero. Control por Computador. Descripcin interna y diseo ptimo. Marcombo
Boixareu Editores, 1991.
P. Ollero y E.F. Camacho. Control e Instrumentacin de Procesos Qumicos. Ed. Sntesis,
1997.
R.H. Perry, D.W. Green and J.O. Mahoney. Perry Manual del Ingeniero Qumico.
McGraw Hill, 1994.
C.L. Phillips y H.T. Nagle. Sistemas de Control Digital. Anlisis y Diseo. Ediciones G.
Gili. 1987.
A. Porras y A.P. Montanero. Autmatas Programables. Mc-Graw Hill, 1990.
F.R. Rubio y M.J. Lpez. Control Adaptativo y Robusto. Universidad de Sevilla, 1996.
B. Shahian and M. Hassul. Control System Design using MATLAB. Prentice Hall, 1993.
F.G. Shinskey. Sistemas de control de procesos: aplicacin, diseo y sintonizacin.
McGraw Hill, 1996.
A. Simon. Autmatas Programables, Paraninfo, 1988.
D.E. SEBORG, T.F. EDGAR, D. A. MELLICHAMP, process dynamics
and control, editorial john wiley & sons, 1989
Jos Luis Guzmn Snchez, Ramn Costa Castell, Manuel Berenguel Soria,
Sebastin Dormido Bencomo Control automtico con herramientas interactivas
Karl J. Astrm, Tore Hgglund Control PID avanzado
Jos Acedo Snchez Instrumentacin y control Avanzado de Procesos Instrumentacin y
Pedro Ollero de Castro, Eduardo Fernndez Camacho control de plantas qumicas
Dale E. Seborg, Thomas F. Edgar, Duncan A. Mellichamp, Francis J. Doyle III Process
Dynamics and Control
G. F. Franklin, J. D. Powell and A. Emani-Naeni Feedback control of dynamic systems
Katsuhiko Ogata Ingeniera de Control Moderna
Antonio Creus Sol Instrumentacin Industrial
Wayne B. Bequette Process Control: Modeling, Design and Simulation
J.P. Corrpiou Process Control: Theory and Applications
B.A. Ogunnaike, W.H. Ray Process Dynamics, Modeling and Control
F.G. Shinskey Sistemas de control de procesos: aplicacin, diseo y sintonizacin
(Joseph Brosilow) Techniques of model-based control
Puede ver la bibliografa existente en la actualidad en el Sistema de Gestin de Biblioteca
consultando en la siguiente direccin:
http://almirez.ual.es/search/e?SEARCH=CONTROL
INSTRUMENTACION
DE
PROCESOS QUIMICOS
Jos Luis Guzmn Snchez, Ramn Costa Castell, Manuel Berenguel Soria,
Sebastin Dormido Bencomo Control automtico con herramientas interactivas
Karl J. Astrm, Tore Hgglund Control PID avanzado
Jos Acedo Snchez Instrumentacin y control Avanzado de Procesos
Pedro Ollero de Castro, Eduardo Fernndez Camacho Instrumentacin y control de
plantas qumicas
Dale E. Seborg, Thomas F. Edgar, Duncan A. Mellichamp, Francis J. Doyle III Process
Dynamics and Control
Sistemas de
Luyben, W.L. Process Modelling, Simulation and Control for Chemical Engineers.
McGraw Hill, 1992.
Matlab User's Guide. Toolbooks on Control Systems. The Matworks Inc. 1995.
Perry R.H. ; Chilton, C.H. Manual del Ingeniero Qumico. McGraw Hill, 1986.
D. R. Coughanowr, Process Systems Analysis and Control, 2nd Edition. McGraw-Hill,
(1991).
B. Wayne Bequette, Process Dynamics, Modeling, Analysis, and Simulation.
Prentice Hall PTR (1998).
M. L. Luyben Essentials of Process Control. McGraw-Hill (1997).
W. L. Luyben, Process Modeling, Simulation, and Control for Chemical Engineers, 2nd
Edition. McGraw-Hill (1996).
Seborg, D.E.; Edgar, Th.F.; Mellichamp, D.A.Process dynamics and control.
John Wiley and Sons (1989).
F. G. Shinskey Process Control Systems. Application, Design, and Tuning. Fourth
Edition.
Foxboro Co. McGraw Hill, New York (1996).
Ruel V. Churchill y James W. Brown, Variable Compleja y Aplicaciones. MacGraw-Hill,
2a. edicin 1978.
M.R. Spiegel, Variable Compleja. Serie Schaum. Mc. Graw-Hill
Coughanowr D.R. Process Systems Analysis and control Mc Graw Hill, 2nd. Edition,
1991
Marlin Thomas E. Process control, Designing Process and Control Systems for Dynamic
Performance, Mc Graw Hill , March 1995.
Babatunde A. Ogunnaike, W. Harmon Ray. Process Dynamics, Modeling and Control
(Topics in Chemical Engineering), Oxford, 1994.
Luyben W. "Process Modeling, Simulation and Control for Chemical Engineers. Mc Graw
Hill, 1973.
Coughanowr and Koppel. "Process Systems Analysis and Control, Mc Graw Hill, 1965.
Douglas J.M. Process Dynamics and Control. Vol II. Prentice Hall, 1972.
Curtis D .Johnson,Process control instrumentation technology, Prentice Hall , New
Jersey 2006.
Smith C.L and Corripio. A..B, Principles and Practice of Automatic Process Control,
John Wiley and Sons, New York, 2006.
Dale E. Seborg, Thomas F. Edgar, Duncan A. Mellichamp, Process Dynamics and
R.H. BISHOP. Modern Control Systems. Analisys and Design using Matlab, Addison
Wesley Publishing Company, Reading (1993)
J.G. BOLLINGER, N.A. DUFFIE. Computer Control of Machines and Processes, AddisonWesley, Reading (1989)
W. BOLTON. Control Engineering, Longman Scientific & Technical, London (1992)
C. CAMINA. Sistemas Continuos de Control, SPUPV, Valencia (1994)
F.J. CEMBRANOS. Sistemas de Control Secuencial, Paraninfo, Madrid (1998)
D.M. CONSIDINE, G.D. CONSIDINE. Process Instruments and Control Handbook, Mc
Graw Hill, New York (1985)
J.M. COULSON, J.F. RICHARDSON. Chemical Engineering. Chem. & Biochem. Reac.
Process Control, Pergamon, New York (1994)
A. CREUS SOLE. Simulacin y Control de Procesos por Ordenador, Marcombo,
Barcelona (1987)
A. CREUS SOLE. Control de Procesos Industriales: Criterios de Implantacin, Marcombo,
Barcelona (1988)
A. CREUS SOLE. Simulacin de Procesos con PC, Marcombo, Barcelona (1989)
A. CREUS SOLE. Instrumentos Industriales: su ajuste y calibracin. 2 ed., Marcombo,
Barcelona (1990)
A. CREUS SOLE. Instrumentacin Industrial. 5 ed, Marcombo Boixareu, Barcelona
(1993)
J.J. DISTEFANO III, A. R. STUBBERUD, I.J. WILLIAMS. Retroalimentacin y Sistemas
de Control 2 ed., Mc Graw-Hill, Madrid (1992)
R. FERREIRO. Nociones sobre Aplicacin de PLCs al Control de Procesos Industriales,
SPUC, La Corua (1995)
G.F. FRANKLIN. Control de Sistemas Dinmicos con Retroalimentacin. Addison-Wesley
Iberoamericana, Argentina (1991)
J.A. HASLAM, G.R. SUMMERS, D. WILLIAMS. Engineering Instrumentation and Control,
Arnold, London (1981)
IFAC. Advanced Control of Chemical Processes, Pergamon, Oxford (1994)
A. ISIDORI. Nonlinear Control Systems, Springer, Berln (1995)
C.D. JOHNSON. Process Control Instrumentation Technology. 5th ed., PrenticeHall
International, Inc., New Jersey (1997)
B.J. KUO. Sistemas de Control Digital.1 edicin en espaol. CECSA, Mxico (1997)
W.L LUYBEN, B.D. TYREUS, M.L. LUYBEN. Plantwide Process Control, McGraw-Hill,
New York (1999)
J.M. MACIEJWSKI. Multivariable Feedback Design, Addison Wesley, New York (1995)
V.A. MARTNEZ. Automatizar con Autmatas Programables, RA-MA, Madrid (1991)
K.S. NARENDRA, A.M. ANNASWAMY. Stable Adaptive Systems, Prentice-Hall
International Inc., London (1989)
J. N, J.M. ANGULO. Control de Procesos Industriales por Computador, Paraninfo,
Madrid
(1987)
K. OGATA. Designing Linear Control Systems with Matlab, Prentice Hall D.L., New
Jersey
(1994)
K. OGATA. Dinmica de sistemas, Prentice Hall Hispanoamericana, Mxico (1987)
K. OGATA. Discrete-time Control Systems, Prentice Hall D.L., New Jersey (1995)
K. OGATA. Ingeniera de Control Moderna. 3 ed. Prentice Hall Hispanoamericana,
Mxico (1998)
K. OGATA. Problemas de Ingeniera de Control utilizando Matlab. Prentice Hall, Madrid
(1998)
B.A. OGUNNAIKE, W.H. RAY. Process Dynamics Modelling and Control, Oxford
University
Press, Oxford (1994)
R.H. PERRY, D.W. GREEN, J.O. MALONEY. Manual del Ingeniero Qumico. 6 edicin,
Mc Graw-Hill interamericana, Mxico (1998)
C.L.PHILLIPS, H.T. NAGLE. Sistemas de Control Digital. Anlisis y Diseo. 2ed.,
Barcelona (1993)
M. POLKE. Process Control Engineering, VCH, Weinheim (1994)
J.B. RAWLINGS. Dynamics and Control of chemical reactors, distillation columns and
batch processes, Pergamon, Oxford (1995)
J. SALT, E. CASADO, M.MARTNEZ. Prcticas de Sistemas de Tiempo Real y de Control
de Procesos, SPUPV, Valencia (1988)
F.G. SHINSKEY. Sistemas de Control de Procesos: Aplicacin, Diseo y Sintonizacin,
Mc Graw-Hill, Mxico (1996)
otras informaciones de inters sobre la asignatura
http://www.uclm.es/profesorado/marodrigo/
Reid, Robert C The properties of gases and liquids. 4th ed. New York: McGraw-Hill, 1988.
ISBN 0070517991.
Ramrez, W. Fred. Computational methods for process simulation. 2nd ed. Boston:
Butterworths, 1997. ISBN 075063541X.
Bequette, B. Wayne. Process dynamics : modeling, analysis, and simulation. Upper
Saddle River: Prentice-Hall, 1998. ISBN
Bateson, Robert N. Introduction to control system technology. 7th ed. Upper Saddle
RiverColumbus: Prentice Hall, 2001. ISBN 0130306886.
Ollero de Castro, Pedro. Control e instrumentacin de procesos qumicos /. Madrid:
Sntesis, 1997. ISBN 8477385173.
Roberts, Nancy. Introduction to computer simulation : the system dynamics approach.
Reading: Addison-Wesley, 1983. ISBN 0201064146.
Crowe, C.M. Chemical plant simulation : an introduction to computer-aided steady-state
process analysis. Hamilton: McMaster University, 1969. ISBN 0131286862.
Luyben, William L. Process modeling, simulation, and control for chemical engineers. 2nd
ed. New York: McGraw-Hill, 1990. ISBN 0070391599.
Provder, Theodore. Computer applications in applied polymer science II : automation,
modeling, and simulation. Washington: American Chemical Society, 1989. ISBN
0841216622.
Colbourn, Elizabeth A. Computer simulation of polymers. New York: Longman Scientific
& Technical, 1994. ISBN 0582083745.
Smith, Carlos A.; Corripio, Armando B. Control automtico de procesos: teora y prctica.
Mxico: Limusa, 1996. ISBN 9681837916.
Mayol i Bada, Albert. Autmatas programables. Barcelona: Marcombo, 1987. ISBN
842670672X.
Shinskey, F. Greg. Process control systems: application, design and tuning. 4th ed. New
York: McGraw-Hill, 1996. ISBN 0070571015.
Creus Sol, Antonio. Instrumentacin industrial. 7a ed. Barcelona: Marcombo, 2005.
ISBN 8426713610.
Medina, Jos Luis. La automatizacin en la industria qumica [en lnea]. Barcelona:
Edicions UPC, 2010
[Consulta:
30/05/2011].
Disponible
9788498803983.
a:
<http://ccuc.cbuc.cat/record=b4360058~S23*cat>.
ISBN