Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Gasoducto Extensión
Sureste / South East Estaciones IOP - Inspecciones Operativas PRO - Proveedores NC - No Conformidad 01 / Mar / 2024
Extension Project
Título del Hallazgo / Title of the finding: Errores dimensionales en Soportes COMECI / Dimensional errors in supports COMECI
Se ha detectado desde Oficina Técnica que tenemos configuraciones diferentes en los soportes del tipo “PS6-A2”, una de estas configuraciones no esta respetando el típico de
soportería generado por ingeniería / It has been detected from the Technical Office that we have different configurations in the supports of type "PS6-A2", one of these
configurations is not respecting the typical support generated by engineering.
Firma / Fecha /
Elaboró / Issued by: Rafael Souza 01 / Mar / 2024
Signature: Date:
CAUSA BÁSICA / BASIC MET2 - Errores detectados en los procedimientos / normativa / especificación / elaborados de Ingeniería luego de emitidos a obra. /
CAUSE: Errors detected in the procedures / standards / specifications / Engineering's elaborations after issued to the site.
MAT4 - Los materiales son inadecuados / no cumplen con las especificaciones, por causas inherentes al proveedor (error o falla de
CAUSA INMEDIATA / fabricación, entrega de material equivocado, dañado durante el transporte a cargo del proveedor, etc.). / Materials are inadequate /
INMEDIATE CAUSE: do not meet specifications, due to causes inherent to the supplier (manufacturing error or failure, wrong material delivered,
damaged during transport at supplier's expense, etc.).
La configuracion del soporte se realizo de acuerdo a las vistas principales del tipico/The configuration of the stand was done according to the
main views of the typical.
DISPOSICIÓN / RESPONSE
No obstante, el tipico del soporte no es claro en las diferentes vistas principales de fabricacion/The typical support is not clear in the different
main manufacturing views.
Comeci solicita fotografias del soporte fabricado correctamente y trabajar sobre las fotos para el ajuste y fabricación de los soportes PS6/Comeci requests
photographs of the correctly manufactured support and work on the photos for the adjustment and manufacture of the supports PS6.
ACCIÓN CORRECTIVA (Únicamente aplicable para NCC o NC) / CORRECTIVE ACTIONS (Only applicable for NCC or NC)
Ajuste y fabricación de soportes PS6 (trazo, corte, habilitado de material nuevo, armado, soldadura, limpieza mecanica y sand blast, y aplicación de
recubrimiento anticorrosivo)/Adjustment and fabrication of supports PS6 (tracing, cutting, fitting of new material, assembly, welding, mechanical
cleaning, sand blast, and application of anti-corrosion coating).
Comments:
SI / YES NO
FECHA DE VERIFICACIÓN /
VERIFICATION DATE:
Efectividad / Alta / Media / Baja / Verificó / Firma /
Effectivity High Medium Low Verified by: Signature
REPORTE DE HALLAZGO (ANEXO FOTOGRÁFICO) / FINDING REPORT (PHOTOGRAPHIC ANNEX)
Informe / SEE-QA-PF-03-002 -
Report N°: ANEXO 1 - 077
Sheet 2 of 2