Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Contents
Creando un NE Manualmente............................................................................................................2
Creating Optical NEs...........................................................................................................................3
Creating Subnets................................................................................................................................5
Modifying NE ID and Extended ID......................................................................................................6
Modifying the NE IP Address..............................................................................................................8
Sincronización de tiempo (NE Time Synchronization)......................................................................10
Habilitación del monitoreo del desempeño (Performance).............................................................11
Creando un NE Manualmente
Procedimiento
1. Abre la aplicación Administración de redes. Haga clic con el botón derecho en el área vacía
de la topología física y seleccione Nuevo > NE en el menú contextual
On NCE, WDM NEs are placed in different optical NEs or in the Physical Topology
for management. There are four types of optical NEs: WDM_OADM, WDM_OEQ,
Prerequisite
1. Abre la aplicación Administración de redes. Haga clic con el botón derecho en el área vacía
de la topología física y seleccione Nuevo > NE en el menú contextual.
2. En el cuadro de diálogo que se muestra, seleccione un tipo de ONE y defina los parámetros
relacionados. Haga clic en Aceptar
3. Click Basic Attributes, then enter the basic attributes such as the name of the
4. Click Resource Division, then select an NE or a board from the idle optical
5. Click OK.
Prerequisites
Context
Subnets are used to simplify the topology view without impact on NEs. It is
Procedure
Step 1 Open the Network Management app and choose Topology > View > Physical
Step 2 In the Physical Topology, right-click in the blank area and choose New > Subnet
Step 3 In the dialog box that is displayed, set Name, Alias, Parent Path, Position, and
Remarks.
Step 4 (Optional)Click the Select Objects. Select objects in the Available Objects area
----End
Modifying NE ID and Extended ID
Modifying the NE ID may interrupt NE communication and reset the NE.
Procedure
Step 1 In the physical topology, select an NE. Click to expand the information panel,
Step 2 In the NE Explorer, choose Function Tree > Configuration > NE Properties.
Step 3 Click Modify NE ID. In the Modify NE ID dialog box, set New ID and New
Step 4 In the Warning dialog box, click OK. A dialog box is displayed, indicating that the
----End
Modifying the NE IP Address
Procedure
Step 1 In the physical topology, select an NE. Click to expand the information panel,
Step 2 In the NE Explorer, select an NE and choose Function Tree > Communication >
Communication Parameters.
Step 3 Set the IP Address, Subnet Mask, Gateway IP address, and click Apply.
Step 4 Click Yes in the Confirm dialog boxes that are displayed twice.
----End
Sincronización de tiempo (NE Time Synchronization)
Procedimiento
2. Haga clic con el botón derecho en un registro y elija Sincronizar con NM Time en el menú
contextual.
Procedimiento