Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Contenido
1. NE Attributes:.............................................................................................................................2
2. Configuring the Board Port Attributes........................................................................................2
3. Optical Power Management:.....................................................................................................3
4. Viewing the Board Manufacturer Information Report...............................................................3
INVENTARIO
El estado del láser debe ser Habilitado cuando la tarjeta está en uso o se está
poniendo en servicio.
Establezca los parámetros de interfaz de las tarjetas WDM de acuerdo con los requisitos de
ingeniería. Diferentes tarjetas soportan diferentes parámetros, pero los procedimientos de
configuración son los mismos. También puede consultar todos los parámetros de la interfaz
1. NE Attributes:
Llenar la siguiente Tabla
NE Name
NE ID
NE IP
Sub mask
Procedure
In the NE Explorer, select a board and choose Configuration > WDM Interface from the
navigation tree.
Click By Board/Port (Channel) and select Channel from the drop-down list. If you click By
Function, you can query and set the parameters for the board and channel according to
different functions.
On the Basic Attributes and Advanced Attributes tab pages, double-click the parameter
fields to modify or set the attribute values of each optical port or board.
Click Apply.
Click Query. The Operation Result dialog box is displayed. Click Close. The board attributes
are the same as the configured values.
Seleccione al menos 1 Tarjeta de Línea y 1 Tarjeta Tributaria para llenar los siguientes Cuadros
Line Board
Tributary Board
Current Valores de
Sensibilidad
NE / Slot / Board / Optical Referencia de
Unit y OL
Port Power Entrada
In Out Sen OL Inferior Superior
OTU (WDM
side)
Step Operation
1 In the Main Menu, choose Inventory > Project Document > Board
Manufacturer Information.
2 Select the board that you want to query in the left NE node, and then
click .
3 The Query dialog box is displayed to show the query progress. When
the query is complete, an operation result dialog box is displayed. Click
Close.
Completar la Siguiente Tabla.
Seleccione una Tarjeta Transponde LSC y una LTX, además de dos modelos de amplificadores
EDFA, un MUX y un DMUX, para luego Completar el siguiente cuadro
Tunable or not
Dispersion tolerance(ps/nm)
Gain range(dB)
Working band
Para el OCH Trail. Analice los niveles de Potencia Óptica para todo el Trail, en ambos
sentidos.
Para el Client Trail. Analice la Matriz de Crossconexión que realiza el servicio seleccionado