Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Grupo de lanas B
---------------------------------------- ---------------
TALLA:
S - M - L - XL - XXL - XXXL
Medidas terminadas:
MATERIALES:
PUNTO:
AGUJAS: AGUJAS
--- -------------------------------------------------- -
(*) Pattern prices are calculated from the smallest size / cheapest colour. You will find a prices table in this print to help
you calculate the price for other sizes.
All yarns are DROPS yarns. Color charts and updated retailer lists at www.garnstudio.com
-------------------------------------------------------
PATTERN:
To calculate how to increase/decrease evenly, use the total number of stitches on row (e.g. 225
stitches) and divide stitches by number of increases/decreases to be done (e.g. 9) = 25.
In this example increase by making 1 yarn over after approx. every 25th stitch. On next row work
yarn overs twisted to avoid holes.
To decrease in this example work every 24th and 25th stitch together.
Work until 1 stitch remains before marker thread, 1 yarn over, knit 2 (marker thread is in the middle
of these stitches), 1 yarn over. Work yarn overs twisted on next round to avoid holes - work the new
stitches in A.2.
-------------------------------------------------------
-------------------------------------------------------
Piece is knitted in the round on circular needle up to armhole, then divide the piece and work front
piece and back piece separately. Work sleeves in the round on a short circular needle/double
pointed needles before decreasing for sleeve cap, and continue sleeve back and forth on needle.
BODY:
Continue this pattern. REMEMBER THE KNITTING GAUGE! When piece measures 25-26-27-28-
29-30 cm = 9 3/4”-10 1/4”-10 5/8”-11”-11 3/8”-11 3/4”, work next round as follows: Bind off the 3-
3-3-4-4-4 first stitches on round, work 96-102-114-124-136-148 stitches, bind off 6-6-6-8-8-8
stitches, work 96-102-114-124-136-148 stitches, bind off the last 3-3-3-4-4-4 stitches. Each part is
worked separately back and forth on needle. Slip the first 96-102-114-124-136-148 stitches on a
stitch holder, and work over the last 96-102-114-124-136-148 stitches on back piece.
BACK PIECE:
= 96-102-114-124-136-148 stitches. Continue with pattern as before, and continue to bind off for
armhole in each side on every other row as follows: 2 stitches 1-1-2-3-4-5 times and 1 stitch 1-2-4-
5-6-8 times = 90-94-98-102-108-112 stitches.
When piece measures 46-48-50-52-54-56 cm = 18”-19”-19 3/4"-20 1/2"-21 1/4"-22", bind off the
middle 38-40-40-42-42-44 stitches for neck, and finish each shoulder separately. Then bind off 1
stitch on next row towards the neck = 25-26-28-29-32-33 stitches. Continue with pattern until
piece measures 48-50-52-54-56-58 cm = 19”-19 3/4"-20 1/2"-21 1/4"-22"-22 3/4" (= 23-24-25-26-
27-28 cm = 9”-9 1/2”-9 3/4”-10 1/4”-10 5/8”-11” from beginning of armhole), bind off. Work the
other shoulder the same way.
FRONT PIECE:
= 96-102-114-124-136-148 stitches. Continue with pattern and to bind off for armhole in the sides
as on back piece = 90-94-98-102-108-112 stitches. When piece measures 42-44-46-48-49-51 cm =
16 1/2”-17 1/4”-18”-19”-19 1/4”-20”, slip the middle 30-32-32-34-34-36 stitches on a stitch holder
for neck, and finish shoulders separately. Then bind off stitches on every row from neck as follows:
Bind off 2 stitches 1 time and 1 stitch 3 times = 25-26-28-29-32-33 stitches remain on each
shoulder. Continue with pattern until piece measures 48-50-52-54-56-58 cm = 19”-19 3/4"-20
1/2"-21 1/4"-22"-22 3/4" (= 23-24-25-26-27-28 cm = 9”-9 1/2”-9 3/4”-10 1/4”-10 5/8”-11” from
beginning of armhole), bind off. Work the other shoulder the same way.
ASSEMBLY:
SLEEVE:
Work sleeves in the round on double pointed needles/ circular needle, bottom up. Divide piece
when decreasing for sleeve cap and work back and forth on needle.
Cast on 54-54-54-63-63-63 stitches on double pointed needles size 4 mm = US 6 with Puna. Knit 1
round, then work pattern over all stitches according to A.1 (= 6-6-6-7-7-7 repetitions of 9 stitches
on round). Continue with A.1 over all stitches until piece measures approx. 11 cm = 4 3/8”, adjust
after one whole repetition of A.1 vertically. Work 2 ridges in GARTER STITCH over all stitches – see
explanation above, on last round adjust number of stitches to 54-56-58-60-64-66. Insert a marker
thread at beginning of round = mid under sleeve. Continue as follows: 1 stitch in stockinette stitch,
work A.2 over the next 52-54-56-58-62-64 stitches, finish with 1 stitch in stockinette stitch.
Continue this pattern, AT THE SAME TIME when piece measures 12 cm = 4 3/4”, increase 1 stitch
on each side of marker thread - READ INCREASE TIP. Increase on every 2-1½-1½-1½-1-1 cm =
3/4”-1/2”-1/2”-1/2”-3/8”-3/8” 17-18-20-21-23-24 times in total = 88-92-98-102-110-114 stitches.
When piece measures 46-46-45-43-42-40 cm = 18”-18”-17 3/4”-17”-16 1/2”-15 3/4”, bind off 3
stitches on each side of marker thread (= 6 stitches bind off mid under sleeve), then work sleeve
back and forth. Bind off for sleeve cap at beginning of every row in each side as follows: 2 stitches 4-
4-4-5-5-6 times, 1 stitch 0-0-1-2-3-4 times. Then bind off 2 stitch in each side until piece measures
52 cm = 20 1/2” in all sizes, bind off 3 stitches in each side, then bind off the remaining stitches.
Sleeve measures 53 cm = 21” in all sizes. Work another sleeve the same way.
NECK EDGE:
Begin from right side with Puna and a short circular needle size 4 mm = US 6 - pick up approx. 96 to
106 stitches (including stitches from stitch holder and divisible by 2). Purl 1 round, knit 1 round, purl
1 round, knit 1 round. Work rib (knit 1/purl 1) in the round for 10 cm = 4”. Bind off stitches with knit
over knit and purl over purl.
ASSEMBLY:
Sew in sleeves.
Diagram explanations
= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= slip 1 stitch on cable needle behind piece, knit 1, knit 1 from cable needle
= slip 1 stitch on cable needle behind piece, knit 1, purl 1 from cable needle
= slip 1 stitch on cable needle in front of piece, purl 1, knit 1 from cable needle
= slip 1 stitch on cable needle behind piece, knit 2, purl stitch from cable needle
= slip 2 stitches on cable needle in front of piece, purl 1, knit 2 from cable needle
= slip 2 stitches on cable needle in front of piece, knit 2, knit 2 from cable needle
Have you made this or any other of our designs? Tag your pictures in social media with
#dropsdesign so we can see them!
Use me to measure your project!
To get the measurement tape to be 100 % accurate, you have to print out the pattern in full scale (and not use the print
option "fit to page").
We take pride in providing patterns that are correct and easy to understand. All patterns are translated from
Norwegian and you can always check the original pattern for measurements and calculations.
If we get a report of a potential error, we will review the pattern and make the correction if necessary. This will be done
normally within 7 to 10 working days. If no correction is made, it means that we weren't able to find any error/mistake.
Wondering where you can buy the yarn for this pattern?
Try a DROPS Super Store!