Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Bienvenido: cr080dcvi
Producto: WHEEL LOADER
Modelo: 928G WHEEL LOADER 6XR
Configuración: 928G Wheel Loader 6XR00001-UP
(MACHINE) POWERED BY 3116 Engine
Especificaciones
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System
Número de medio -SENR1223-01Fecha de publicación -01/09/2001Fecha de actualización -01/09/2001
i01395128
Service Brake
SMCS - 4251
Note: The following information is for the 117-1615 Brake and Planetary on machines with the following
serial numbers: (6XR1-18257SR1-11998CR1-20469AR1-599).
(2) Thickness of new 117-3321 Friction Disc ... 8.30 ± .13 mm (0.327 ± 0.005 inch)
Note: The following chart shows the wear rate for the 117-3321 Friction Disc.
Table 1
Friction Disc Wear Chart
Percent of Remaining Life Disc Thickness
100
8.30 mm (0.327 inch)
80
8.17 mm (0.322 inch)
60
8.04 mm (0.317 inch)
40
7.91 mm (0.311 inch)
20
7.78 mm (0.306 inch)
0
7.65 mm (0.301 inch)
Minimum thickness of worn disk ... 7.65 mm (0.301 inch)
Note: When you replace friction disc (2), replace the two O-ring seals (4) and (5) and replace the three
springs (6) .
Note: The following information is for the 163-5775 Brake and Planetary on machines with the following
serial numbers: (6XR1826-UP7SR1200-UP8CR2047-UP9AR600-UP).
(1) Thickness of new 170-4698 Reaction Plate ... 24.99 mm (0.984 inch)
(2) Thickness of new 170-0048 Friction Disc ... 9.10 ± .08 mm (0.358 ± 0.003 inch)
Note: The following chart shows the wear rate for the 170-0048 Friction Disc.
Table 2
Friction Disc Wear Chart
Percent of Remaining Life Disc Thickness
100
9.10 mm (0.358 inch)
80
8.81 mm (0.347 inch)
60
8.52 mm (0.335 inch)
40
8.22 mm (0.324 inch)
20
7.93 mm (0.312 inch)
0
7.65 mm (0.301 inch)
Note: When you replace friction disc (2), replace the two seals (4) and (5) and replace the three springs (6) .
Copyright 1993 - 2017 Caterpillar Inc. Tue Dec 12 2017 11:46:35 GMT-0500 (Hora est. Pacífico, Sudamérica)
Todos los derechos reservados. cr080dcvi
Red privada para licenciados del SIS.