Documentos de Académico
Documentos de Profesional
Documentos de Cultura
I. OBJETIVO DE LA PRACTICA
II. ABSTRACT
On this lab, we have essayed the adsorption of gold on carbon coming from burnt
coconut shells, we have tested the parameters used on the process, especially
the pH and the amount of carbon used.
There are some properties that the Barren solution must have such as, low
concentration of cyanicide metals, low presence of carbonated minerals that
could clog the holes on the carbon.
Finally we could make an isotherm curve which provides information of the yield
of the process and the required amount to obtain the best recovery of the gold
Procedimiento:
Para comenzar el laboratorio se dio a conocer los motivos por los cuales se usa
el carbon activado para adsorcion del oro en lugar de utilizar la cementacion
mediante polvo de zinc (Merril Crowe): la solucion posee muchos cianicidas (Fe
y Cu), ademas de usarse principalmente en minerales cianurados con bajos
contenidos de plata.
Imagen: Carbon activado utilizado previamente
Ley en Ley en
mg Au en mg Au en
Carbón (g) solución carbón
solución carbón
mg/L mg/L
0.5 7 5 0.35 0.25
0.8 6.3 5.7 0.315 0.285
1.2 4.2 7.8 0.21 0.39
1.4 2.1 9.9 0.105 0.495
EFICIENCIA ADSORCION
90.0%
80.0%
70.0%
60.0%
50.0%
40.0%
30.0%
20.0%
10.0%
0.0%
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Carbon (g)
Isoterma de adsorcion
1.6
1.4
1.2
Carbon (g)
0.8
0.6
0.4
0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55
Au Adsorbido (mg)
Adsorción
kgC/gAu
2.0000
2.8070
3.0769
2.8283
V. DISCUSION DE RESULTADOS
VI. CONCLUSIONES
Por otro lado se obtuvo que la cantidad de carbón más eficiente para la obtención
de Au seria alrededor de 2.8 kg/g de Au a considerar para un proceso real, el
cual puede ser reutilizado luego de haber descargado el oro adsorbido en el.
VII. CUESTIONARIO
Datos iniciales:
Peso del carbón = 0.05 g,
Concentración de oro inicial = 5.0 mg/l,
Solución = 1 litro.
La fila (mg Au/g CA) de la tabla anterior se completo haciendo uso de la siguiente
relación:
𝒎𝒈 𝑨𝒖 𝑪𝒊 − 𝑪𝒇
= × 𝑽𝒐𝒍𝒖𝒎𝒆𝒏
𝒈𝒓 𝑪𝑨 𝑾𝑪𝑨
Isoterma de Adsorción
100
80
mg Au/g C.A
60
40
20
0
0 1 2 3 4 5
mg Au/L.
60 90 mg Au/gr CA
50
40
30
20
10
0
0 2 4 6 8 10 12 14
Tiempo en horas
VIII. BIBLIOGRAFIA
ALFARO, Edmundo
2017 Guía de laboratorio de Metalurgia extractiva. PUCP
PUCP
2016 “Laboratorio de mineralurgia”. Consulta: 27/11/2016
http://departamento.pucp.edu.pe/ingenieria/minas/laboratorio
s/