Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Andrs Lamas 9251, Jos Len Surez (1655) Buenos Aires Argentina TeleFax: 54 11 4 735 7026 / 4735 7031
Email: sys@sisinfo.com.ar
NDICE
3 5 7 9
HERRAMIENTAS DE FIJACIN
WIRELINE Taponera Medida 20 S&S Cabeza de Fuego Taponera Medida 20 S&S Instrucciones Para Carga de Aceite Taponera Medida 20 S&S Instrucciones Generales Fijacin a Cable
10 11 12 13 13 14
Indice
Aplicaciones
Abandono de pozos Aislacin temporaria o permanente de zonas especficas Inyeccin de cemento (junto a Retenedor de Cemento S&S)
Caractersticas
Presin mxima de trabajo: 10.000 PSI Elemento empaquetador soporta altas temperaturas: hasta 400 F Diseo comprobado en campo Construido en materiales fcilmente rotables Antiextrusores expansibles Fijacin con cable o caos con herramientas de uso standard Disponible en las diferentes medidas de casing: 5 a 95/8
Applications
Well abandonment Temporary and permanent zonal isolations Squeeze cement operations (joint the S&S Retainer Cement)
Features
Maximum working pressure: 10.000 PSI Packing element supports high temperatures: until 400 F Field proven design Constructed of drillable materials Expansible non extrusion rings Can run on wireline or tubings with standard setting tools Available in different casing sizes: 5 a 95/8
Especificaciones Tcnicas / Technical Specifications Tapn Reperforable S&S 10.0 / S&S 10.0 Redrillable Bridge Plug
CASING
Dimetro Ext. O.D in Peso Weigth lb / ft Dimetro Ext. O.D in (mm)
TAPN / PLUG
Rango de fijacin Setting range Min. Max. in (mm) in (mm) * Cdigo Prod. Product Code
9.5 13.5 11.5 21.0 13.0 25.0 22.5 25.2 10.5 12.0 17.0 34.0 23.0 40.0 17.0 22.0 17.0 35.0 29.3 53.5
3.78 (96.01) 4.25 (107.95) 5.34 (135.64) 5.62 (142.75) 7.99 (202.95)
3.92 (99.57) 4.58 (116.33) 5.60 (142.24) 5.99 (152.15) 8.43 (214.22)
4.56 (115.82) 5.05 (128.27) 6.35 (161.29) 6.65 (168.91) 9.06 (230.12)
272X10
S274281
S274272
B400-69
1 BB
272X20
S274271
S274272
B400-69
2 AA
272340
S174273
S274277
272X60
S274276
S274277
B400-69
3 BB
272X80
S274286
S274277
B400-69
6 AA
X = 3 (Wireline); X = 5 (Tubing)
in
4 - 5
lb - (kg)
33,000 (15,000) 5
in
5 7 22,000 (10,000) 31,000 (14,000) 35,300 (16,000)
lb - (kg)
31,000 (14,000) 44,000 (20,000) 48,500 (22,000) 26,500 (12,000) 37,500 (17,000) 41,900 (19,000)
5/8 6 5/8
55,100 (25,000)
9 5/8 5/8
Aplicaciones
Abandono de pozos Aislacin temporaria o permanente de zonas especficas Inyeccin de cemento (junto a Retenedor de Cemento S&S)
Caractersticas
Presin mxima de trabajo: 6.000 PSI Elemento empaquetador soporta altas temperaturas: hasta 200 F Diseo comprobado en campo Construido en materiales fcilmente rotables Antiextrusores expansibles Fijacin con cable con herramientas de uso standard Disponible en diferentes medidas de casing: 5 a 7
Applications
Well abandonment Temporary and permanent zonal isolations Squeeze cement operations (joint the S&S Retainer Cement)
Features
Maximum working pressure: 6.000 PSI Packing element supports high temperatures: until 200 F Field proven design Constructed of drillable materials Expansible non extrusion rings Can run on wireline with standard setting tools Available in different casing sizes: 5 a 7
Especificaciones Tcnicas / Technical Specifications Tapn Reperforable S&S 6.0 / S&S 6.0 Redrillable Bridge Plug
CASING
Dimetro Ext. O.D in Peso Weigth lb / ft Dimetro Ext. O.D in (mm)
TAPN / PLUG
Rango de fijacin Setting range Min. Max. in (mm) in (mm) Cdigo Prod. Product Code
5 5
5/8 6 5/8
272720
S274275
S274274
272760
S274276
S274277
in
5 - 5
lb - (kg)
33,000 (15,000) 55,100 (25,000)
Aplicaciones
Inyeccin de cemento (junto al Tapn Reperforable S&S) Abandono de pozos
Caractersticas
Presin mxima de trabajo: 10.000 PSI Elemento empaquetador soporta altas temperaturas: hasta 400 F Permite prueba de presin de tubings antes de la inyeccin de cemento La vlvula de rentencin cierra automticamente en la inyeccin, al retirar el stinger Construido en materiales fcilmente rotables Fijacin con cable o caos con herramientas de uso standard Puede ser utilizado como tapn Disponible en las diferentes medidas de casing: 5 a 95/8
Applications
Squeeze cement operations (joint the S&S Redrillable Bridge Plug) Well abandonment
Features
Maximum working pressure: 10.000 PSI Packing element supports high temperatures: until 400 F Allows pressure-testing before squeeze Retainer valve closes automatically in the squeeze, when the stinger is removed Constructed of drillable materials Can run on wireline or tubings with standard setting tools Simple conversion to bridge plug Available in different casing sizes: 5 a 95/8
Especificaciones Tcnicas / Technical Specifications Retenedor de Cemento S&S 10.0 / S&S 10.0 Cement Retainer
CASING
Dimetro Ext. Peso Weigth O.D in lb / ft Dimetro Ext. O.D in (mm)
RETENEDOR / RETAINER
Rango de fijacin Setting range Min. Max. in (mm) in (mm) * Cdigo Prod. Product Code
9.5 13.5 11.5 21.0 13.0 25.0 22.5 25.2 10.5 12.0 17.0 34.0 23.0 40.0 17.0 22.0 17.0 35.0 29.3 53.5
3.78 (96.01) 4.25 (107.95) 5.34 (135.64) 5.62 (142.75) 7.99 (202.95)
3.92 (99.57) 4.58 (116.33) 5.60 (142.24) 5.99 (152.15) 8.43 (214.22)
4.56 (115.82) 5.05 (128.27) 6.35 (161.29) 6.65 (168.91) 9.06 (230.12)
272X10
S274281
S274272
B400-69
1 BB
272X20
S274271
S274272
B400-69
2 AA
272440
S272293
S274292
272X60
S274291
S274292
B400-69
3 BB
272X80
S274296
S274292
B400-69
6 AA
X = 4 (Wireline); X = 6 (Tubing)
in
4 - 5
lb - (kg)
33,000 (15,000) 5
in
5 7 22,000 (10,000) 31,000 (14,000) 35,300 (16,000)
lb - (kg)
31,000 (14,000) 44,000 (20,000) 48,500 (22,000) 26,500 (12,000) 37,500 (17,000) 41,900 (19,000)
6 5/8 5/8 6 5/8 5/8 - 9 5/8 5/8 55,100 (25,000) 9 5/8 5/8
ITEM CA NTIDA D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 14 2 1 1 1 1
DESCRIPCIN CM ARA DE PRESIN PISTN FLOTANTE CILINDRO SUPERIOR INTERM EDIO PISTN PERNO EJE DE PISTN CABEZA DE CILINDRO SEGURO DE CHAVETA CHAVETA CAM PANA M ANDRIL FIJADOR VSTAGO RETENEDOR ASIENTO O'RING 2-334 D90 O'RING 2-216 D90 O'RING 2-213 D90 O'RING 2-012 D90 TORNILLO ALLEN (VARIOS) GUSANO ALLEN
10
ITEM CANTIDAD 1 2 3 4 5 - 15 6 7 8 9 10 11 12 13 14 15 - 5 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1
DESCRIPCIN CONTACTO RETRACTIL HEX 7/16 10x32 NF AISLADOR SUPERIOR CABEZA AISLADOR INFERIOR ESPRRAGO RESORTE PIN AISLADOR ANILLO TRABA TAPA FULMINANTE ASIENTO FULMINANTE O'RING 2-112 D 90 O'RING 2-325 D90 O'RING 2-328 D90 ESPRRAGO
11
Tem peratura C ( F ) Hasta 95 (200) 95 - 135 (200 - 275) 135 - 175 (275 - 350) 175 - 205 (350 - 400)
12
5 7
11 9
4. En caso de no llegar a roscar la cantidad de vueltas mnimas en alguna de las dos roscas, retire el punto dbil y verifique que ambas roscas estn libres de todo tipo de residuos, de ser necesario limpie las mismas y repita la operacin del punto 3.
NUNCA! SE DEBER UTILIZAR UN TAPN O RETENEDOR QUE NO CUMPLA CON LO INDICADO EN EL PUNTO 3. SI SE UTILIZA, SE CORRE EL RIESGO DE BARRER LOS FILETES ROSCADOS SIN LOGRAR CORTAR EL PUNTO DBIL, FRACASANDO LA OPERACIN DE FIJADO CON LA CONSIGUIENTE PRDIDA DE TIEMPO QUE ESO IMPLICARA.
La correcta colocacin de los Puntos Dbiles en los Conjuntos Fijadores y Tapones o Retenedores, es responsabilidad exclusiva del operador que los utilice. Si se registrara cualquier tipo de problema con un Tapn o Retenedor, por favor enviar una nota detallando la fecha que figura grabada en nuestros Tapones y Retenedores y el nmero de partida grabada en el Punto Dbil. Ante cualquier duda rogamos dirigirse a nuestro representante comercial de la zona, quien atender todas sus consultas y observaciones.
13
CAUSA
SOLUCIN
Verificar los sellos taponera Verificar asiento vlvula alivio Verificar piezas componentes vlvula alivio manual taponera
Verificar nivel de aceite y viscosidad en Verificar nivel de pozo disminuir velocidad
al aproximarse al nivel
CAUSA
SOLUCIN
dbil
14
CAUSA
SOLUCIN
Cementar con cuchara sobre tapn Verificar datos en catlogos Verificar datos en catlogo Verificar tensin recomendada en catlogo
CAUSA
SOLUCIN
Ante cualquier otro problema o consulta no dude en dirigirse a nuestra oficina central.
15
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
CANTIDAD 1 1 1 1 5 6 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 2
DESCRIPCIN TOPE SUPERIOR VSTAGO PORTAFLEJE SUPERIOR ARO RETENEDOR DE FLEJE TORNILLO ALLEN (VARIOS) FLEJE ANILLO SEGER P/EJ 55 TPN LS 5 1/2 PORTAFLEJE INFERIOR CAMISA DE CONTROL TUERCA DE CONTROL O'RING 2-219 D90 CAMISA DE RETENCIN RETENEDOR DE PERRO PERRO CAMISA COLOCADORA CONECTOR ROSCADO CUERPO PORTACEMENTADOR SELLO O'RING 2-025 D90 CEMENTADOR RESORTE GUSANO ALLEN
16
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
CANTIDAD 1 1 1 1 3 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
DESCRIPCIN TOPE SUPERIOR VSTAGO PORTAFLEJE SUPERIOR ARO RETENEDOR DE FLEJE SUPERIOR TORNILLO ALLEN (VARIOS) FLEJE PORTAFLEJE INFERIOR ARO RETENEDOR DE FLEJE INFERIOR ANILLO TRABA GUSANO ALLEN ANILLO TOPE CAMISA DE CONTROL TUERCA DE CONTROL O'RING 2-225 D90 GUSANO ALLEN RESORTE DE PERRO PERRO CAMISA COLOCADORA CONECTOR ROSCADO CUERPO PORTACEMENTADOR O'RING 2-131 D90 SELLO CEMENTADOR GUSANO ALLEN
17
- Colocar la herramienta fijadora en la morza, sujetndola del Tope Superior. - Colocar el juego de mordazas superiores aflojando la abrazadera de seguridad lo suficiente para que entre en la cresta del Conector Roscado, alinear las mordazas, lubricar la parte superior de las mordazas, deslizar la Camisa Colocadora, roscarla en la Camisa de Control hasta que trabe al conjunto de mordazas, retroceder unas vueltas. - Verificar el Conjunto de Flejes, si retrocede hasta el tope, reajustar la Camisa Colocadora. - Lubricar la rosca izquierda del Conector Roscado, retirar el prisionero del TPN, marcar el lugar del prisionero sobre el cono, deslizar el TPN sobre el cuerpo Portacementador roscar el TPN al Conector Roscado hasta que haga tope, retroceder hasta el primer alojamiento del prisionero alinear y colocar prisionero. - Terminar de roscar la Camisa Colocadora verificando que no quede juego en el Conjunto de Flejes, apretar los prisioneros.
18
- Colocar la herramienta fijadora en la morza, sujetndola del Tope Superior, lubricar y colocar el Sello, lubricar y roscar el Cementador. - Colocar el juego de Mordazas superiores aflojando la abrazadera de seguridad lo suficiente para que entre en la cresta del Conector Roscado, alinear las Mordazas, lubricar la parte superior de las Mordazas, deslizar la Camisa Colocadora, roscarla en el Camisa de Control hasta que trabe al conjunto de Mordazas, retroceder unas vueltas. - Verificar el Conjunto de Flejes, si retrocede hasta el tope, reajustar la Camisa Colocadora.. - Lubricar la rosca izquierda del Conector Roscado , retirar el prisionero del TPN, marcar el lugar del prisionero sobre el cono, lubricar el Sello deslizar el TPN sobre el Cementador, sello, # roscar el TPN al Conector Roscado hasta que haga tope, retroceder hasta el primer alojamiento del prisionero alinear y colocar prisionero. ( # ayudar golpeando el TPN con precaucin del culote) - Terminar de roscar la Camisa Colocadora verificando que no quede juego en el conjunto, apretar los prisioneros. - Aflojar la morza y dejar la Herramienta Fijadora inclinada 45, comprobar circulacin de fluido desde el Cabezal y orificios de circulacin del TPN K observando de esta manera la apertura de la vlvula del TPN.
19