Documentos de Académico
Documentos de Profesional
Documentos de Cultura
CCNA 1 Capitulo 6 Exam
CCNA 1 Capitulo 6 Exam
0 exam Respuestas
Espaol- English
1. Durante el proceso de reenvo de trfico, lo que har el router inmediatamente
despus de contrastar la direccin IP de destino a una red en una entrada de la
tabla de enrutamiento conectado directamente?
1. conmutar el paquete a la interfaz conectada directamente
1. switch the packet to the directly connected interface
2. buscar la direccin del siguiente salto para el paquete
3. descartar el trfico tras consultar la tabla de rutas
4. analizar la direccin IP de destino
2. Cmo garantizan anfitriones que sus paquetes se dirigen hacia el destino correcto
de la red?
1. Ellos tienen que mantener su propia tabla de enrutamiento local que contiene una ruta a
la interfaz de bucle de retorno, una ruta de red local, y una ruta por defecto a distancia.
1. They have to keep their own local routing table that contains a route to the
loopback interface, a local network route, and a remote default route.
2. Ellos siempre dirigen sus paquetes a la puerta de enlace predeterminada, que ser
responsable de la entrega de paquetes.
3. enviar un paquete de consulta a la puerta de enlace predeterminada pidiendo la mejor
ruta.
4. Buscan en su propia tabla de enrutamiento local para una ruta a la direccin de destino de
la red y pasar esta informacin a la puerta de enlace predeterminada.
3. Cundo sera la imagen de Cisco IOS celebrada en ROM se utiliza para arrancar
el router?
1. completa cuando el IOS no se puede encontrar
2. cuando la configuracin en ejecucin dirige el router para hacer esto
3. durante un proceso de arranque normal
4. durante una operacin de transferencia de archivos
4.
Un paquete dejando PC-1 tiene que atravesar tres saltos para llegar a PC-4.
5.
El router tiene suficiente memoria RAM y memoria flash para apoyar el nuevo
IOS?
1. El router tiene suficiente memoria RAM y memoria flash para la actualizacin del IOS
23.
English
1. During the process of forwarding traffic, what will the router do immediately after
matching the destination IP address to a network on a directly connected routing table
entry?
1. switch the packet to the directly connected interface
2. How do hosts ensure that their packets are directed to the correct network
destination?
1. They have to keep their own local routing table that contains a route to the
loopback interface, a local network route, and a remote default route.
2. They always direct their packets to the default gateway, which will be responsible for the
packet delivery.
3. They send a query packet to the default gateway asking for the best route.
4. They search in their own local routing table for a route to the network destination address
and pass this information to the default gateway.
3. When would the Cisco IOS image held in ROM be used to boot the router?
1. when the full IOS cannot be found
2. when the running configuration directs the router to do this
3. during a normal boot process
4. during a file transfer operation
4.
5.
Does the router have enough RAM and flash memory to support the new IOS?
1. The router has enough RAM and flash memory for the IOS upgrade
2. The router needs more RAM and more flash memory for the IOS upgrade.
3. The router has enough RAM, but needs more flash memory for the IOS upgrade.
4. The router has enough flash memory, but needs more RAM for the IOS upgrade.
7. Which three commands are used to set up a password for a person who attaches a
cable to a new router so that an initial configuration can be performed? (Choose
three.)
1. password cisco
2. line console 0
3. login
8. Why is NAT not needed in IPv6?
1. Any host or user can get a public IPv6 network address because the number of
available IPv6 addresses is extremely large.
2. line vty 0 4
3. interface fastethernet 0/0
4. enable secret cisco
9. After troubleshooting a router, the network administrator wants to save the router
configuration so that it will be used automatically the next time that the router
reboots. What command should be issued?
1. copy running-config startup-config
2. copy startup-config flash
3. copy running-config flash
4. reload
5. copy startup-config running-config
10. What is a service provided by the Flow Label field of the IPv6 header?
1. It informs network devices to maintain the same path for real-time application
packets
2. It identifies the total length of the IPv6 packet.
3. It limits the lifetime of a packet.
4. It classifies packets for traffic congestion control.
11. When connectionless protocols are implemented at the lower layers of the OSI
model, what are usually used to acknowledge the data receipt and request the
retransmission of missing data?
1. upper-layer connection-oriented protocols
2. Transport layer UDP protocols
3. connectionless acknowledgements
4. Network layer IP protocols
12. Fill in the blank. In a router,_____is the nonvolatile memory where the diagnostic
software, the bootup instructions, and a limited IOS are stored.
ROM
13. Which two commands can be used on a Windows host to display the routing table?
(Choose two.)
1. route print, netstat -r
2. tracert
3. show ip route
4. netstat -s
14. A technician is manually configuring a computer with the necessary IP parameters
to communicate over the corporate network. The computer already has an IP address,
a subnet mask, and a DNS server. What else has to be configured for Internet access?
1. the default gateway address
2. the MAC address
3. the domain name of the organization
4. the WINS server address
15. Which command displays a summary chart of all router interfaces, their IP
addresses, and their current operational status?
1. show ip interface brief
2. show interfaces
3. show version
4. show ip route
16. Which two files, if found, are copied into RAM as a router with the default
configuration register setting boots up? (Choose two.)
1. IOS image file
2. startup configuration
3. POST diagnostics
4. running configuration
17. Which two interfaces will allow access via the VTY lines to configure the router?
(Choose two.)
1. LAN and WAN interfaces
2. console interfaces
3. USB interfaces
4. aux interfaces
18. Which IPv4 header field is responsible for defining the priority of the packet?
1. differentiated services
2. traffic class
3. flow label
4. flags
19. A computer has to send a packet to a destination host in the same LAN. How will
the packet be sent?
20. Match the configuration mode with the command that is available in that mode
23.