Documentos de Académico
Documentos de Profesional
Documentos de Cultura
TRANSFORMADORES
INTEGRANTES:
GUSTAVINO TYRONE
GARCIA ANGELO
CABEZA DANTE
INTRODUCCION
DEFINICION REGULACION DE
TRANSFORMADORES
La regulación de voltaje se refiere a la
capacidad de un transformador para
mantener un voltaje de salida constante
dentro de límites específicos, a pesar de
las fluctuaciones en el voltaje de entrada
o las variaciones de carga.
RV
METODOS DE REGULACION DE
TRANSFORMADORES
El método de HH es más efectivo,
reduce el riesgo de saturación y ofrece
una regulación de voltaje superior
preferida para ajustar el voltaje de
salida de un transformador
Cambiadores Cambiadores
de tomas en de tomas sin
carga (OLTC ) carga
CAMBIADORES DE TOMA EN
TRANSFORMADORES DE POTENCIA
Cambiadores de toma
TIPOS DE CAMBIADORES DE TOMAS EN EL
TRANSFORMADOR
Cambiador de tomas sin carga (NLTC) Cambiador de tomas bajo carga (OLTC
• [1] A. Oleas and C. Barrera, “Control de Voltaje en Sistemas Eléctricos de Potencia,” p. 86, 2012, [Online]. Available:
https://dspace.ups.edu.ec/bitstream/123456789/17361/1/UPS - ST004101.pdf
• [2] P. Rivera, A. E. Oleas, and C. A. Barrera, Control De Voltaje En Sistemas Eléctricos De Potencia Usando
Transformadores Con Taps. 2019.
• [3] M. Todorovski, “Transformer voltage regulation - Compact expression dependent on tap position and primary/secondary
voltage,” IEEE Trans. Power Deliv., vol. 29, no. 3, pp. 1516–1517, 2014, doi: 10.1109/TPWRD.2014.2311959.
• [4] A. G. Lavrov and E. N. Popov, “Process analysis of transformer’s secondary voltage regulation,” Proc. 2017 IEEE 2nd
Int. Conf. Control Tech. Syst. CTS 2017, pp. 376–377, 2017, doi: 10.1109/CTSYS.2017.8109572.
• [5] S. A. Martín Carrara, “RTGD-DIS - Regulaci ´ on de tensi ´ on con generaci ´ on distribuida en distribuci ´ on,” 2018.
• [6] C. Zhou, T. Wang, H. Liu, D. Cai, and K. Cao, “The selection of rated voltage on medium and low voltage side of
transformer,” China Int. Conf. Electr. Distrib. CICED, no. 201805280000072, pp. 405–409, 2018, doi:
10.1109/CICED.2018.8592046.
• [7] M. A. Rodríguez Pozueta, “Propiedades de los transformadores,” Univ. Cantab., vol. 1, pp. 7–61, 2012.
• [8] M. E. El-Hawary, “Power engineering letters,” IEEE Power Eng. Rev., vol. 22, no. 10, p. 43, 2002, doi:
10.1109/mper.2002.981342.
• [9] R. Bhuyan, A. R. Mor, P. Morshuis, G. C. Montanari, and W. Erinkveld, “Analysis of the arcing process in on-
load tap changers by measuring the acoustic signature,” EIC 2014 - Proc. 32nd Electr. Insul. Conf., no. June, pp. 193–
197, 2014, doi: 10.1109/EIC.2014.6869374.
• [10] E. I. N. Hau, “Vacutap ® vr el cambiador de tomas bajo carga multifuncional.”.
• [11] S. B. Mirov, V. V. Fedorov, D. Martyshkin, I. S. Moskalev, M. Mirov, and S. Vasilyev, “Progress in Mid-IR
Lasers Based on Cr and Fe-Doped II-VI Chalcogenides,” IEEE J. Sel. Top. Quantum Electron., vol. 21, no. 1, pp. 292–
310, 2015, doi: 10.1109/JSTQE.2014.2346512.
• [12] I. Power and E. Society, IEEE Standard Terminology for Power and Distribution Transformers, vol. 2010, no.
December. 2010.
• [13] “Deetap ® Du”.
• [14] P. A. P. De Lima and S. H. L. Cabral, “Computer simulation as an aid in the rating of a transformer on-load tap
changer,” IEEE Electr. Insul. Mag., vol. 30, no. 4, pp. 34–38, 2014, doi: 10.1109/MEI.2014.6843766.
• [15] R. Trujillo, J. Carlos, G. Prada, and J. Carlos, “Métodos de diagnóstico de averías para transformadores con
cambiadores de tomas en carga,” 2007.
• [16] ABB Power Technology Products AB Components, “Cambiadores de tomas en carga, tipo UCGuía técnica,”
2002.