Documentos de Académico
Documentos de Profesional
Documentos de Cultura
RUEDAS RECTAS
ENGRANAJE RECTO
Valores Caracteristicos:
Número de dientes, z
Módulo, m en mm
Paso= m
NOMENCLATURA
ENGRANAJE RECTO
Geometría de las
ruedas rectas
RUEDAS RECTAS
FUERZAS GENERADAS
Fuerza Tangencial:
Ft = Mt / R
Fuerza Radial:
Fr = Ft Tg
, ángulo de contacto.
Valor habitual, =20º
RUEDAS HELICOIDALES
Valores Caracteristicos:
Número de dientes, z
Módulo, m en mm
Paso= m
a, ángulo de hélice.
Valores habituales de 15º
20º
FUERZAS GENERADAS
Fuerza Tangencial:
Ft = Mt / Ra
Fuerza Radial:
Fr = Ft Tg a
Tg a = Tg / Cos a
Fuerza axial:
Fr = Ft Tg a
RUEDAS CONICAS
Valores Caracteristicos:
Número de dientes, z
Módulo, m medio en mm
Paso= m
1 - 2, ángulos de paso.
Ejes perpendiculares:
1 + 2 = 90º
FUERZAS GENERADAS
Fuerza Tangencial:
Ft = Mt / Rmedio
Fuerza Radial:
Fr = Ft Tg Cos
Fuerza axial:
Fr = Ft Tg Sen
Aplicación de los diferentes tipos de ruedas
En la figura se
muestra una batidora
industrial, en la que
podemos ver los
diferentes tipos de
engranajes.
Engranaje, tornillo sin fín
18 0.005 0.006 - - -
12 0.006 0.007 0.009 - -
8 0.007 0.008 0.010 0.014 -
5 - 0.010 0.012 0.016 -
3 - 0.014 0.016 0.020 0.028
2 - - 0.021 0.025 0.033
1.25 - - - 0.034 0.042
Figure 14.19 Effect of Brinell Hardness on allowable contact stress for two grades of
through-hardened steel. [ANSI/AGMA Standard 1012-F90, Gear Nomenclature,
Definition of Terms with Symbols, American Gear Manufacturing Association, 1990.]
Table 14.4 Lewis form factors for various numbers of teeth (pressure
angle 20°, full depth involute).
Figure 14.22 Spur gear geometry factors for pressure angle of 20° and full-
depth involute. [ANSI/AGMA Standard 1012-F90, Gear Nomenclature,
Definition of Terms with Symbols, American Gear Manufacturing
Association, 1990.]
Text Reference: Figure 14.21, page 643
Application Factor
Driven Machines
Table 14.5 Application factor as a function of driving power source and driven
machine.
Figure 14.25 Helical gear. (a) Front view; (b) side view.