Documentos de Académico
Documentos de Profesional
Documentos de Cultura
PROCEDURE
To make this artifact, the central part of the plastic bottle
must be cut out, followed by making some holes in the back
of the bottle/, then the metallic container is cut out in a
circular shape next to the bottle, we proceed to make a hole
in it. hole in the center and fold it to form a fan/, then we
will glue the motor to the fan, followed by an opening
where the fan and motor will be positioned on the inside of
the bottle, after putting double-sided tape on the edge of
the inside of
the bottle where we will proceed to put a cylindrical metal
ring that fits right into the inside of the bottle, then we will
glue a mesh to the metal ring with hot silicone, then we will
join the mesh with the ring to the bottle plastic, followed by
the whole procedure we will join the two parts of the plastic
bottle, then we will put the plastic tube in the spout of the
bottle and the whole procedure of reinforcing with duct
tape to reinforce the vacuum cleaner body.