Documentos de Académico
Documentos de Profesional
Documentos de Cultura
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
ATENCIÓN
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
1 STANDBY-ON
DIGITAL SOUND DISPLAY
2 IM
AL JA
ZZ
T
OP
DSC £
3
TE
H
C
SLEEP NO RO
MASTER
4 BAND
TUNER
TAPE 1 • 2
TAPE
CDR/VIDEO
AUX
VOLUME
™
5
MIC
NTSC/ LEVEL
¡
PAL
1 2 3
L
DY
TR
6
N
SOUND CON
AM
)
IC BASS BO
ALBUM- ALBUM+
OPEN/
CLOSE
7
MIC
MP3-CD
(
L
ITA
OS
TITLE- TITLE+
IG
T
D
*
CHANGE
9 &
0 ^
! PLAYBACK PLAY / REC
%
@
# $
3 3
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
English
English ------------------------------------------------ 6
Español
Español --------------------------------------------- 35
English
PLEASE NOTE THAT THE VOLTAGE
SELECTOR LOCATED AT THE REAR OF ● Before operating the system, check that the
THIS SYSTEM IS PRESET AT 220V FROM operating voltage indicated on the typeplate (or
THE FACTORY. FOR COUNTRIES THAT the voltage indication beside the voltage
OPERATE AT 110V-127V, PLEASE ADJUST selector) of your system is identical with the
TO 110V-127V BEFORE YOU SWITCH ON voltage of your local power supply. If not, please
THE SYSTEM. consult your dealer.
● Place the system on a flat, hard and stable
Supplied accessories surface.
● Place the system in a location with adequate
– 2 speaker boxes
ventilation to prevent internal heat build-up in
– remote control
your system. Allow at least 10 cm (4 inches)
– AM loop antenna
clearance from the rear and the top of the unit
– One Video cinch cable
and 5 cm (2 inches) from each side.
● Do not expose the system, batteries or discs to
Environmental information
excessive moisture, rain, sand or heat sources
All unnecessary packaging has been omitted. We
caused by heating equipment or direct sunlight.
have tried to make the packaging easy to
separate into three materials: cardboard (box), ● No naked flame sources, such as lighted candles,
polystyrene foam (buffer) and polyethylene (bags, should be placed on the apparatus.
protective foam sheet). ● No objects filled with liquids, such as vases, shall
Your system consists of materials which can be be placed on the apparatus.
recycled and reused if disassembled by a ● Don’t expose the system to dripping or
specialised company. Please observe the local splashing.
regulations regarding the disposal of packaging
materials, exhausted batteries and old ● The lens may cloud over when the system is
equipment. suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
"The making of unauthorized copies of copy-
● The mechanical parts of the set contain self-
protected material, including computer
lubricating bearings and must not be oiled or
programmes, files, broadcasts and sound
lubricated.
recordings, may be an infringement of
copyrights and constitute a criminal offence. ● When the system is switched to Standby
This equipment should not be used for such mode, it is still consuming some power.
purposes." To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
TV
AM loop L
VIDEO
IN
AM
ANTENNA
VIDEO
speaker B OUT
speaker
(right) FM
ANTENNA
D (left)
AUX/CDR
R L
E
SUBWOOFER
OUT
+
R
–
–
C VOLTAGE
VOLTAGE
SELECTOR
SELECTOR
220V-
240V
110V-
110V-
127V
220V-
240V
127V
L
+
SPEAKERS 6Ω
A
AC power cord
voltage.
– All other connections have been made. FM Antenna
It is unnecessary to connect the FM pigtail
WARNING! antenna since it is fixed to the main unit.
– For optimal performance, use only the
● Adjust the FM antenna for optimal FM stereo
original power cable.
reception.
– Never make or change any connections
with the power switched on.
English
system
Front Speakers
Use a cinch cable to connect AUX/CDR IN to
Connect the speaker wires to the SPEAKERS
the analogue audio out terminals of an external
terminals, right speaker to "R" and left speaker to
equipment (TV, VCR, Laser Disc player, DVD
"L", coloured (marked) wire to "+" and black
player or CD Recorder).
(unmarked) wire to "-".
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
1 2 the AUX/CDR IN left terminal. Alternatively, you
can use a “single to double” cinch cable (the output
sound still remain mono).
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
1
D Video Out Connection
Connect the VIDEO OUT terminal at the rear 2
of the system to the TV or VCR VIDEO IN for
viewing or recording.
Note:
– To avoid magnetic interference with the picture
CAUTION!
on your TV, do not position the front speakers too
– Remove batteries if they are exhausted
close to the TV.
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
10
English
PBC – to view the current status of the system.
– to switch on or off the playback control mode. ≤ Disc tray
RETURN ∞ VCD operations (on remote control only)
– to return to the previous menu level during
OSD
playback (for VCD with PBC switched on).
– to switch on or off the On Screen Display on
# Tape deck 1 the TV.
$ Tape deck 2 ZOOM
% Tape deck operations – to enlarge a still picture of the VCD on the TV
screen.
A. REPLAY
– to select continuous playback in either AUTO RESUME
REPLAY or ONCE mode only. – to continue playback again from where you have
stopped (for VCD with PBC switched off).
RECORD
– to start recording on tape deck 2. VOCAL
– to fade out the original vocal from a Karaoke
^ PROG
VCD or to switch between mono or stereo
for CD/VCD/MP3-CD…to programme disc
mode during audio disc playback.
tracks.
for Tuner ............. to programme preset radio KEY CONTROL ( IÈ i )
stations. – to change the VCD key tone level to suit your
for Clock ............ to select 12- or 24-hour clock vocal range.
mode. I ........................... to decrease the key tone level.
È .............................. to restore the key tone level to
& CLOCK•TIMER
original setting.
– to view the clock, set the clock or set the timer.
i ............................. to increase the key tone level.
* DIM
ECHO -/+
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF. – to adjust the VCD echo level for karaoke after
inserted the microphone.
(n
– to connect headphones. SLOWÖ
– to watch the VCD at a slower speed.
) MIC
– to connect microphone jack. A-B
– to playback a certain scene or passage of a CD/
¡ MIC LEVEL VCD repeatedly.
– to adjust the mixing level for karaoke or
microphone recording. DIGEST
– to scan through a VCD or a specific track.
™ MASTER VOLUME (VOLUME +/-)
– to increase or decrease the volume. § IS (not functional for this model)
11
•
∞ ∞
12
English
DIGITAL SOUND DISPLAY
STANDBY-ON
AL JA
IM ZZ
T
OP
DSC
TE
H
C
SLEEP NO RO
MASTER
BAND TAPE 1 • 2 CDR/VIDEO VOLUME
CD
O
DY
TR
N
SOUND CON
AM
ALBUM- ALBUM+
OPEN/
CLOSE
MIC
MP3-CD
L
ITA
OS
TITLE- TITLE+
IG
T
D
13
The system has a demonstration mode that You can select the desired brightness for the
shows the various features offered by the system. display.
To activate the demonstration ● In any source mode (except standby mode),
● In standby mode, press and holdÇon the press DIM repeatedly to select : DIM 1, DIM 2,
system until "WELCOME" is displayed. DIM 3 or DIM OFF display mode.
➜ The demonstration will begin. ➜ DIM is shown, except for DIM OFF mode.
3 half off
Note: OFF normal on
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
Note:
to standby mode.
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Switching the system on
In standby/demonstration mode Volume control
● Press STANDBY ON to switch on the last Adjust MASTER VOLUME (or press
selected source. VOLUME + or - on the remote control) to
● Press VCD 1/2/3 (VCD.CD 1/2/3), TUNER, increase or decrease the volume level.
TAPE (TAPE 1/2) or AUX.
To listen through the headphones
● Press OPEN/CLOSE.
● Connect the headphones plug to
➜ The system will switch to CD mode.
the n socket at the front of the
MIC
system.
Switching the system to standby ➜ The speakers will be muted.
mode
In demonstration mode
● Press and hold Ç on the system.
14
English
The best DBB setting is generated automatically
Digital Sound Control (DSC) for each DSC selection. You can manually select
The DSC feature enables you to enjoy special the DBB setting that best suits your listening
sound effects that have preset equaliser settings, environment.
providing the best music reproduction.
DSC DBB
1 Press DSC.
JAZZ off
➜ The selected DSC is shown.
ROCK on (3)
2 Adjust the jog control (or press DSC on the
TECHNO on (3)
remote control repeatedly) to select : JAZZ,
ROCK, TECHNO or OPTIMAL. OPTIMAL on (2)
L
O
DY
TR
N
SOUND CON
AM
IC BASS BO
2
L
ITA
OS
IG
T
D
DISC
NGE
1 1
1 Press DBB.
➜ The selected DBB is shown, except for
DBB OFF mode.
2 Adjust the jog control (or press DBB on the
remote control repeatedly) to select : DBB 1,
DBB 2, DBB 3 or DBB OFF.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
15
AL JA
IM
ZZ
T
OP
DSC
TE
H
C
SLEEP NO RO
MASTER
BAND TAPE 1 • 2 CDR/VIDEO VOLUME
CD
O
DY
TR
N
SOUND CON
AM
ALBUM- ALBUM+
OPEN/
CLOSE
MIC
MP3-CD
L
ITA
OS
TITLE- TITLE+
IG
T
D
16
English
Take note that MP3-CD compilations should
best contain only MP3 tracks (.mp3). To
achieve a good MP3 quality, a bit rate of a disc is loaded in the disc tray
128 kbps is recommended. the current selected disc tray is empty
17
Notes:
– During programme play mode, it is not possible
to repeat playback the current disc (Repeat Disc
mode).
– Pressing theÇ button will cancel all repeat
modes.
18
English
Programming the disc tracks
Programming tracks is possible when playback is ● Stop playback and pressí or ë repeatedly.
stopped. Up to 99 tracks can be stored in the ● To exit review mode, press Ç.
memory in any order.
Notes:
– To programme from a video CD, the PBC mode
has to be switched off.
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
– If you attempt to programme more than 99
tracks, "FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
19
Note:
– Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
Note:
– You can also view the information from a
MP3-CD or normal CD.
20
English
functions (for VCD version 2.0 only) This feature allows you to scan through a VCD
VCD with PBC (Playback Control) will be for a quick review. PBC mode must be
indicated on the display of the set as soon as switched off. There are four digest modes for
they are inserted. PBC is a predefined play selection.
sequence stored in the VCD.
1 Press DIGEST on the remote control.
1 Switch on the TV, insert a VCD with PBC and ➜ "DIGEST" is displayed.
pressÉÅ to start playback. ➜ "1.INTRO SCAN" , "2.DIGEST DISC" ,
2 MENU appears on the TV screen. "3.DIGEST TRACK" and "4.EXIT DIGEST
MENU" appear on TV screen.
If the menu consists of a list of tracks,
you can select a track directly
1. INTRO SCAN
● Press numeric keys 0–9 on the remote
2. DIGEST DISC
control to select your choice.
➜ The VCD starts playing of the selected 3. DIGEST TRACK
sequence automatically.
4. EXIT DIGEST MENU
Note:
– If a menu consists of more than one page, press
¡ / ™ to go through the pages. ● Press digit 1 on the remote control to select
"INTRO SCAN".
Switching off PBC ➜ The first 10 seconds of each track is played.
● In stop mode, press PBC. ● Press digit 2 on the remote control to select
➜ “PBC OFF” is displayed on TV screen. "DIGEST DISC".
➜ The first frame of each track appears on the
Notes: TV screen.
– When PBC mode is switched on, it is not ➜ Press digit 0 – 9 on the remote control to
possible to programme the disc track. playback the desired tracks.
– The menu structure depends on the information ➜ Press í or ë to view the previous or next
stored in the VCD. Please refer to the information page for additional information.
supplied with the disc. ● Press digit 3 on the remote control to select
"DIGEST TRACK".
Returning to menu screen ➜ The first track of the selected disc will be
divided into 9 sessions and displayed on the TV
● Press RETURN to return to the previous VCD
screen.
disc menu level. PBC mode must be
➜ Press digit 0 – 9 on the remote control to
switched on.
playback the desired session.
➜ Press í or ë to digest the next track.
2 To exit Digest mode, press digit 4 on the
remote control to select "EXIT DIGEST
MENU".
21
repeatedly
Slow
This feature is also applicable to audio CD
(except for MP3-CD). To play a cer tain scene or 1 Press SLOW on the remote control to watch a
passage of the disc repeatedly. VCD at a slower speed. There are three types of
slow modes to select.
1 Press A-B on the remote control during
➜ The sound is muted.
playback to mark the start of the chosen scene ➜ On TV screen, “SLOW 1”, “SLOW 2” or
or passage.
“SLOW 3” is displayed.
➜ "SET A" is displayed
2 To resume playback at normal speed, press ÉÅ.
2 Press A-B again to mark the end of the chosen
scene or passage.
➜ "SET B" is displayed Zoom
This feature enables you to view a still picture
● The selected scene or passage is played
frame in an enlarge mode.
repeatedly.
➜ "PLAY AB" is displayed 1 During playback, press ÉÅ to have a still
3 Press A-B once more to return to normal picture on the TV screen.
playback. ➜ The sound is muted.
➜ "CLEAR AB" is displayed ➜ On TV screen, “PAUSE” is displayed.
2 Press ZOOM on the remote control once to
Notes: enlarge the still picture by two times.
– You can also cancel A-B Repeat by pressingí ➜ On TV screen, “ZOOM” is displayed.
orë.
● You can move the zoomed picture left or right
– You are able to set the A-B marking within the
by pressing à or á respectively.
same track only. Once it crosses from one track to
the next, the A-B marking is reset. ● You can move the zoomed picture down or up
by pressing í or ë respectively.
Resume playback from the last 3 Press ZOOM once more to return to normal
still frame.
stop point
This feature is also applicable to audio CD 4 Press ÉÅ to continue playback.
(except for MP3-CD).
● In stop mode, press RESUME on the remote
control to start playback again from where you
have stopped.
Note:
– Resume information is lost if you have changed
the disc, opened the disc tray, change source or
disconnected the system from the power supply.
– Resume is not available when PBC mode is
switched on.
22
English
This feature allows you to fade out the original This feature allows you to change the key tone
vocal from a karaoke VCD. You can also use it to of your vocal range.
select the desired language.
● Press I on the remote control to decrease
● Press VOCAL on the remote control vocal key level.
repeatedly to select the following modes : ➜ "KEY -X" is displayed.
➜ STEREO ™ STEREO VOCAL LEFT ™ ● Press i on the remote control to increase vocal
STEREO VOCAL RIGHT ™ MONO LEFT ™ key level.
MONO RIGHT ™ STEREO … ➜ "KEY +X" is displayed.
Notes:
– “X” denotes the echo level.
– You are advised to switch off the echo effect
when not using the feature.
– If microphone is not inserted, “INSERT MIC”
is displayed.
– Echo will switch off automatically when unplug
the microphone from the system.
23
AL JA
IM
ZZ
T
OP
DSC
TE
H
C
SLEEP NO RO
MASTER
BAND TAPE 1 • 2 CDR/VIDEO VOLUME
CD
O
DY
TR
N
SOUND CON
AM
ALBUM- ALBUM+
OPEN/
CLOSE
MIC
MP3-CD
L
ITA
OS
TITLE- TITLE+
IG
T
D
24
English
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former 1 Press í or ë to select the preset radio station
presets will be overridden. to be erased.
2 Press and hold Çon the system until
Manual Preset Programming “PRESET DELETED” is displayed.
➜ The deleted radio frequency remains on the
1 Tune to your desired radio station (refer to
display.
“Tuning to radio stations”).
➜ The preset numbers of all other preset radio
2 Press PROG. stations in the band with higher numbers are
➜ PROG starts flashing. also decreased by one.
➜ The next available preset number is displayed
● Repeat steps 1–2 to erase other preset radio
for selection.
stations.
To store the radio station to another
preset number
Changing tuning grid (not available for
● Press í or ë to select the desired preset
number. all versions)
In North and South America, the frequency step
3 Press PROG again to store the radio station. between adjacent channels in the MW band is
➜ PROG disappears.
10 kHz (9 kHz in some areas). The preset
● Repeat steps 1–3 to store other radio stations. frequency step in the factory is 9 kHz.
Changing the tuning grid will erase all
To exit manual preset mode
previously stored preset radio stations.
● Press Ç on the system.
Notes:
1 Disconnect the system from the AC power
supply (pull out the AC power cord).
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed. 2 While holding down TUNER and á on the
– During programming, if no key is pressed within system, reconnect the system to the AC power
20 seconds, the system will exit the programme supply.
mode automatically. ➜ The display will show "GRID 9" or
"GRID 10".
Tuning to preset radio stations
Notes:
● Once you’ve programmed the radio stations, – GRID 9 and GRID 10 indicate that the tuning
press í or ë to select the desired preset grid is in step of 9 kHz and 10 kHz respectively.
number. – The FM tuning grid also will be changed from
➜ The preset number, radio frequency, and 50 kHz to 100 kHz or vice versa.
waveband are displayed.
25
AL JA
IM
ZZ
T
OP
DSC
TE
H
C
SLEEP NO RO
MASTER
BAND TAPE 1 • 2 CDR/VIDEO VOLUME
CD
O
DY
TR
N
SOUND CON
AM
ALBUM- ALBUM+
OPEN/
CLOSE
MIC
MP3-CD
L
ITA
OS
TITLE- TITLE+
IG
T
D
26
English
1 Stop playback, press à or á. 1 Press TAPE to select TAPE 2.
➜ The tape will stop automatically at the end of 2 Load a recordable tape into tape deck 2 with full
rewinding or fast forwarding. spool to the left.
2 Press Ç to stop rewinding or fast forwarding. 3 Prepare the source to be recorded.
VCD – load the disc(s).
Note: TUNER – tune to the desired radio station.
– During rewinding or fast forwarding of a tape, it TAPE – load the prerecorded tape into tape
is also possible to select another source (VCD or deck 1 with the full spool to the left.
TUNER, for example). AUX – connect external equipment.
27
Karaoke
2 Press VCD 1/2/3, TUNER, TAPE or AUX to
MIC
LEVEL
select the source to be mixed and start playback.
3 Adjust the volume level of the source with
MASTER VOLUME control.
MIC
4 Adjust the microphone volume with microphone
MIC LEVEL control.
Note:
– Keep the microphone away from the speakers to
Microphone mixing prevent howling.
Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
For Recording, please refer to “Tape
1 Connect a microphone to the MIC jack. Operation/Recording”.
● Before connecting the microphone, set the
microphone MIC LEVEL to the minimum level
to prevent howling sound.
28
English
DIGITAL SOUND DISPLAY
STANDBY-ON
AL JA
IM ZZ
T
OP
DSC
TE
H
C
SLEEP NO RO
MASTER
BAND TAPE 1 • 2 CDR/VIDEO VOLUME
CD
O
DY
TR
N
SOUND CON
AM
ALBUM- ALBUM+
OPEN/
CLOSE
MIC
MP3-CD
L
ITA
OS
TITLE- TITLE+
IG
T
D
29
30
English
DIGITAL SOUND DISPLAY
– All the sound control features (DSC or DBB, for
IM
AL JA
example) are available for selection.
ZZ
T
OP
H
C
NO RO
NTSC/
PAL
For Recording, please refer to “Tape
CD 1 CD 2 CD 3
Operation/Recording”.
L
RO
Maintenance
Cleaning the Cabinet Cleaning the Heads and the Tape Paths
● Use a soft cloth slightly moistened with a mild ● To ensure good recording and playback quality,
detergent solution. Do not use a solution clean the heads A , the capstan(s) B, and
containing alcohol, spirits, ammonia or abrasives. pressure roller(s) C after every 50 hours of
tape operation.
Cleaning Discs ● Use a cotton swab slightly moistened with
● When a disc becomes dirty, cleaning fluid or alcohol.
clean it with a cleaning cloth. ● You can also clean the heads by playing a
Wipe the disc from the centre cleaning tape once.
out.
● Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
31
32
English
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service centre.
Problem Solution
CD OPERATION
“UNREADABLE DISC” is displayed. – Check if the disc is inserted upside down.
– Wait until the moisture condensation at the lens
has cleared.
– Replace or clean the disc, see “Maintenance”.
– Use a finalised CD-RW or a correct MP3-CD
format disc.
“NO DISC” is displayed. – Insert a disc.
No picture on TV screen. – Connect the cable betwen the system and TV.
No colour on TV screen. – Change the system to the respective PAL or
NTSC setting.
Cannot adjust the TV system to – Remove the MP-3 CD from disc tray 1 or press
PAL or NTSC. DISC CHANGE to select a non MP3 disc tray
RADIO RECEPTION
Radio reception is poor. – If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the Mini HiFi
System and your TV or VCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made. – Clean deck parts, see “Maintenance”.
– Use only NORMAL (IEC I) tape.
– Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open. – Remove and reconnect the AC power plug and
switch on the system again.
33
The system does not react when – Remove and reconnect the AC power plug and
buttons are pressed. switch on the system again.
Sound cannot be heard or is of poor – Adjust the volume.
quality. – Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Make sure the MP3 disc was recorded within
32-256 kbps bit rate with sampling frequencies at
48 kHz, 44.1 kHz or 32 kHz.
The left and right sound outputs are – Check the speaker connections and location.
reversed.
The remote control does not function – Select the source (VCD 1/2/3 or TUNER, for
properly. example) before pressing the function button
(É,í,ë).
– Reduce the distance between the remote
control and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly towards the IR
sensor .
The timer is not working. – Set the clock correctly.
– Press and hold CLOCK•TIMER to switch on the
timer.
– If recording or tape dubbing is in progress, stop
recording.
The Clock/Timer setting is erased. – Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features – Press and hold Çon the system to switch off
automatically. the demonstration.
34