Documentos de Académico
Documentos de Profesional
Documentos de Cultura
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#enable
S2#show running-config
Building configuration...
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#
S2#erase starup-config
^
% Invalid input detected at '^' marker.
S2#config t
Enter configuration commands, one per line. End with CNTL/Z.
S2(config)#erase startup-config
^
% Invalid input detected at '^' marker.
S2(config)#^Z
S2#ers
*Mar 1 00:11:10.232: %SYS-5-CONFIG_I: Configured from console by console
S2#erase startup-config
Erasing the nvram filesystem will remove all configuration files! Continue?
[confirm]
[OK]
Erase of nvram: complete
S2#
*Mar 1 00:11:29.224: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
S2#reload
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Password:
Password:
Password:
S2>
S2>
S2>
S2>
S2>enable
Password:
S2#hostname SWX
^
% Invalid input detected at '^' marker.
S2#CONFIG T
Enter configuration commands, one per line. End with CNTL/Z.
S2(config)#HOSTANME SWX
^
% Invalid input detected at '^' marker.
S2(config)#hostaname swx
^
% Invalid input detected at '^' marker.
S2(config)#hostname
% Incomplete command.
S2(config)#hostname ?
WORD This system's network name
S2(config)#hostname w
w(config)#hostname swx
swx(config)#banner motd k ACCION NO PERMITIDA K
Enter TEXT message. End with the character 'k'.
ACCION NO PERMITIDA K
^Z
Unterminated message string
swx#
*Mar 1 00:06:58.818: %SYS-5-CONFIG_I: Configured from console by console
swx#
swx#BANNER ?
% Unrecognized command
swx#CONFIG T
Enter configuration commands, one per line. End with CNTL/Z.
swx(config)#BANNER
% Incomplete command.
swx(config)#BANNER ?
LINE c banner-text c, where 'c' is a delimiting character
config-save Set message for saving configuration
exec Set EXEC process creation banner
incoming Set incoming terminal line banner
login Set login banner
motd Set Message of the Day banner
prompt-timeout Set Message for login authentication timeout
slip-ppp Set Message for SLIP/PPP
swx(config)#HOSTNAME SWX
SWX(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
access-session Access Session Global Configuration Commands
alias Create command alias
archive Archive the configuration
arp Set a static ARP entry
authentication Auth Manager Global Configuration Commands
auto Configure Automation
banner Define a login banner
beep Configure BEEP (Blocks Extensible Exchange
Protocol)
boot Modify system boot parameters
buffers Adjust system buffer pool parameters
call-home Enter call-home configuration mode
cdp Global CDP configuration subcommands
cef Cisco Express Forwarding
cisp Set CISP parameters
class-map Configure CPL Class Map
clock Configure time-of-day clock
cluster Cluster configuration commands
cns CNS agents
crypto Encryption module
default Set a command to its defaults
default-value Default character-bits values
define interface range macro definition
device-sensor IOS Sensor Commands
diagnostic Configure diagnostic information
do-exec To run exec commands in config mode
dot1x IEEE 802.1X Global Configuration Commands
downward-compatible-config Generate a configuration compatible with older
software
eap EAP Global Configuration Commands
enable Modify enable password parameters
end Exit from configure mode
energywise EnergyWise Global Configuration Commands
epm EPM Global Configuration Commands
errdisable Error disable
exception Exception handling
exit Exit from configure mode
fallback Fallback configuration commands
file Adjust file system parameters
format Format the output
global-address-family Enter address-family base routing topology mode
help Description of the interactive help system
hostname Set system's network name
hw-module Control of individual components in the system
identity Identity Configuration Commands
interface Select an interface to configure
ip Global IP configuration subcommands
ipc Configure IPC system
ixi IXI Config command
key Key management
kron Kron interval Facility
lacp LACP configuration
li-view LI View
line Configure a terminal line
link Enable Link State Tracking feature
lldp Global LLDP configuration subcommands
location Global location configuration commands
logging Modify message logging facilities
login Enable secure login checking
mab MAC Authentication Bypass Global Configuration
Commands
mac Global MAC configuration subcommands
macro Macro configuration
map-class Configure static map class
map-list Configure static map list
memory Configure memory management
mls mls global commands
monitor Monitoring different system events
mvr Enable/Disable MVR on the switch
netconf Configure NETCONF
network-policy Network Policy
nmsp NMSP configuration commands
no Negate a command or set its defaults
ntp Configure NTP
parser Configure parser
password Configure encryption password (key)
platform platform specific config commands
policy-manager Policy Manager configuration commands
policy-map Configure CPL Policy Map
port-channel EtherChannel configuration
power Power configure
priority-list Build a priority list
privilege Command privilege parameters
process Configure process
process-max-time Maximum time for process to run before
voluntarily relinquishing processor
psp Enable PSP
qos Global QoS configuration subcommands
queue-list Build a custom queue list
regexp regexp commands
resource Configure Resource settings
rmon Remote Monitoring
route-map Create route-map or enter route-map command mode
router Enable a routing process
sasl Configure SASL
scheduler Scheduler parameters
scripting Configure options for scripting languages
sdm Switch database management
service Modify use of network based services
setup Configure setup options
shell Configure shell command
shutdown Shutdown system elements
snmp Modify non engine SNMP parameters
snmp-server Modify SNMP engine parameters
spanning-tree Spanning Tree Subsystem
stackmaker Specify stack name and add its member
stacks Configure stacks
standby Global HSRP configuration commands
system Set the system configuration
table-map Configure Table Map
tacacs-server Modify TACACS query parameters
template Select a template to configure
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
track Object tracking configuration commands
udld Configure global UDLD setting
username Establish User Name Authentication
vlan Vlan commands
vmps VMPS settings
vstack Configure vstack parameters and enable or disable
SmartInstall
vtp Configure global VTP state
wsma Configure Web Services Management Agents
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#
SWX(config)#CLOCK SET
^
% Invalid input detected at '^' marker.
SWX(config)#^Z
SWX#CL
*Mar 1 00:11:35.692: %SYS-5-CONFIG_I: Configured from console by console
SWX#CLOCK SET
% Incomplete command.
SWX#CLOCK SET ?
hh:mm:ss Current Time
SWX#config t
Enter configuration commands, one per line. End with CNTL/Z.
SWX(config)#enable password ccna
SWX(config)#exit
SWX#
Aug 25 11:56:41.132: %SYS-5-CONFIG_I: Configured from console by console
SWX#config t
Enter configuration commands, one per line. End with CNTL/Z.
SWX(config)#enable passwoord ccna
^
% Invalid input detected at '^' marker.
SWX(config)#exit
SWX#
Aug 25 11:58:20.016: %SYS-5-CONFIG_I: Configured from console by console
SWX#enable password ccna
^
% Invalid input detected at '^' marker.
SWX#config t
Enter configuration commands, one per line. End with CNTL/Z.
SWX(config)#enable password ccna
SWX(config)#login
% Incomplete command.
SWX(config)#login?
login
SWX(config)#login
% Incomplete command.
SWX(config)#
SWX(config)#show interface brief
^
% Invalid input detected at '^' marker.
SWX(config)#exit
SWX#sh
Aug 25 12:00:28.715: %SYS-5-CONFIG_I: Configured from console by console
SWX#show interface brief
^
% Invalid input detected at '^' marker.
SWX#config t
Enter configuration commands, one per line. End with CNTL/Z.
SWX(config)#show vlan brief
^
% Invalid input detected at '^' marker.
SWX(config)#exit
SWX#sh
Aug 25 12:06:03.873: %SYS-5-CONFIG_I: Configured from console by console
SWX#show
% Type "show ?" for a list of subcommands
SWX#show vlan briefg
^
% Invalid input detected at '^' marker.
SWX(config-if)#ip address
^
% Invalid input detected at '^' marker.
SWX(config-if)#ip
% Incomplete command.
SWX(config-if)#ip ?
Interface IP configuration subcommands:
access-group Specify access control for packets
admission Apply Network Admission Control
arp Configure ARP features
auth-proxy Apply authenticaton proxy
device IP device tracking
dhcp Configure DHCP parameters for this interface
igmp IGMP interface commands
verify verify
SWX(config-if)#exit
SWX(config)#interface g00
% Incomplete command.
SWX(config)#interface g0?
. / <0-64>
SWX(config)#interface g0/0
^
% Invalid input detected at '^' marker.
SWX(config)#exit
SWX#sho
Aug 25 12:15:40.565: %SYS-5-CONFIG_I: Configured from console by console
SWX#show interface brief
^
% Invalid input detected at '^' marker.
SWX#config t
Enter configuration commands, one per line. End with CNTL/Z.
SWX(config)#show interface brief
^
% Invalid input detected at '^' marker.
SWX(config)#exit
SWX#
Aug 25 12:16:07.970: %SYS-5-CONFIG_I: Configured from console by console
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#
SWX#show interface brief
^
% Invalid input detected at '^' marker.
SWX(config)#interface g0/0
^
% Invalid input detected at '^' marker.
SWX(config)#interface
Aug 25 12:21:25.018: %IP-4-DUPADDR: Duplicate address 192.168.1.11 on Vlan1,
sourced by 10e7.c63d.1462
SWX(config)#interface
% Incomplete command.
SWX(config)#
SWX(config)#interface
Aug 25 12:21:38.372: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed
state to down
Aug 25 12:21:39.370: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/5, changed state to down
SWX(config)#interface
Aug 25 12:21:41.384: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/5, changed state to up
SWX(config)#interface g0/0
^
% Invalid input detected at '^' marker.
SWX(config)#interface
Aug 25 12:22:00.082: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/5, changed state to down
SWX(config)#interface
Aug 25 12:22:02.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/5, changed state to up
SWX(config)#interface
Aug 25 12:22:16.238: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/5, changed state to down
SWX(config)#interface
Aug 25 12:22:17.237: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to
down
SWX(config)#interface interf
Aug 25 12:22:38.091: %LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to
up
Aug 25 12:22:39.097: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/11, changed state to up
SWX(config)#interface f0/1
SWX(config-if)#ip address 192.168.1 21 255.255.255.0
^
% Invalid input detected at '^' marker.
SWX(config-if)#exit
SWX(config)#interface vlan 1
SWX(config-if)#ip address 192.168.1.21 255.255.255.0
% 192.168.1.0 overlaps with Vlan99
SWX(config-if)#show vlan brief
^
% Invalid input detected at '^' marker.
SWX(config-if)#exit
SWX(config)#exit
SWX#
Aug 25 12:25:09.748: %SYS-5-CONFIG_I: Configured from console by console
SWX#show vlan brief