Documentos de Académico
Documentos de Profesional
Documentos de Cultura
LY
N
O
EL
A8
D
O
M
3D
C Caracolmaker
VIEW IN BROWSER
Summary
Esturcutura iM8 para anet A8 o similar. Para montar una estructura
economica con tubo de 25mm de espesor.
1mm offset on the Z axis. Better tighten the bolts and nuts (make video
about it). designed to reduce the need for supports much more. possibility
of increasing print sizes at a low cost.
Printing tips:
50% fill or more 5 outer perimeters and also up and down layer height
2mm temperature 220 oC (that's my opinion)
im8-esquina-4.stl 54.4 KB
updated 5. 2. 2020
im8-esquina-1.stl 54.4 KB
updated 5. 2. 2020
im8-esquina-3.stl 54.4 KB
updated 5. 2. 2020
im8_refuerzo2.stl 58.9 KB
updated 5. 2. 2020
im8_refuerzo1.stl 58.9 KB
updated 5. 2. 2020
im8_refuerzo3.stl 58.9 KB
updated 5. 2. 2020
im8_motory.stl 87.9 KB
updated 5. 2. 2020
im8_soportevarillay_1.stl 46.8 KB
updated 5. 2. 2020
im8-esquina-2.stl 54.4 KB
updated 5. 2. 2020
im8_soportevarillay_2.stl 46.8 KB
updated 5. 2. 2020
im8_tensory.stl 60.2 KB
updated 5. 2. 2020
im8_soportevarillay_3.stl 46.8 KB
updated 5. 2. 2020
im8_xyz_motorz_left.stl 115.0 KB
updated 5. 2. 2020
im8_soportevarillay_fincarrera.stl 47.0 KB
updated 5. 2. 2020
im8_refuerzo4.stl 58.9 KB
updated 5. 2. 2020
im8_xyz_motorz_rigth.stl 115.0 KB
updated 5. 2. 2020
im8_zl_motor_25left.stl 372.0 KB
updated 5. 2. 2020
im8_ysoprtevarillayfincarrera.stl 154.4 KB
updated 5. 2. 2020
im8_ejezx_rodamientosleft.stl 95.5 KB
updated 5. 2. 2020
im8-soporte-extrusor.stl 61.2 KB
updated 5. 2. 2020
im8_ejezx_rodamientosrigt.stl 95.5 KB
updated 5. 2. 2020
soporte-extrusor.stl 133.5 KB
updated 5. 2. 2020
Attribution