Documentos de Académico
Documentos de Profesional
Documentos de Cultura
htm
Topología de laboratorio
Procedimientos de laboratorio
Tarea 1: Inicie sesión en CUCM
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 1/7
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm
En esta tarea, verificará que algunos de los servicios que podrían ac varse en CUCM se inicien y
ac ven. Tanto el Estudiante 1 como el Estudiante 2 pueden completar este ejercicio
simultáneamente.
Disposi vo Habla a
administración Ci5co123!
2. From your assigned desktop, launch Internet Explorer. Browse to the CUCM Console at
h ps://10.1.1.100/ccmadmin (or use the shortcut in the Favorites bar), and log in with username
admin and password Ci5co123!.
CUCM users are divided into two categories beginning with release 5.0:
Applica on Users: Administrators and other voice applica ons (IPMA, A endant Console, IPCC
Express, External servers, etc.)
3. Navigate to User Management > User Se ngs > Creden al Policy. Inspect the Default Creden al
Policy.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 2/7
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm
4. Navigate to User Management > User Se ngs > Creden al Policy Default. Inspect the list of default
creden al policies.
5. Select the End User Password Default Creden al Policy. Change the creden al to Ci5co123! then
click Save. This will be the default end user password.
6. Select Back To Find/List in the Related Links drop-down box and click Go. Select the End User PIN
Creden al Policy. Change the creden al to 12345 and click Save. This will be the default end user
PIN.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 3/7
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm
9. Use the following table to iden fy what user you will create in following lab steps.
User Profile UP UP
10. Fill out the new end-user fields with the se ngs from the table above. Student 1 is shown as an
example. Click Save when you have completed all the fields.
11. A er saving the user, scroll a li le further down the page to Permissions Informa on Sec on and
select Add to Access Group.
12. When the Find and List Access Control Groups window pops up, click Find.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 5/7
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm
13. From the list of Access Control Group, select Standard CCM End Users. Scroll to the bo om of the
page and click Add Selected.
14. On the End User Configura on page, click Save. Log out of the CUCM Administra on page in the
upper right corner.
15. Test the login of your newly created end user. This will be janderson for Student 1 and showe for
Student 2. Browse to h ps://10.1.1.100/ucmuser. Student 1 is shown as an example.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 6/7
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm
16. Explore the available op ons in the Self Care Portal. Note that no phone is assigned to this user at this
me.
Lab Complete
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L07.htm 7/7