Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1
Laboratorio de Física I, Departamento de Ciencias Exactas,
Universidad de las Fuerzas Armadas ESPE, Sede Matriz, Sangolqui Ecuador.
E-mail: robertoc25izaa@gmail.com
Resumen
Abstract
In the present laboratory report is written the way in which, through experimentation, it is possible to determine the
coefficient of friction of the known surfaces, the force of friction is which opposes the movement when a body is in
movement and this in turn will depend on two parameters as they are; the normal force, and the coefficient of friction,
it is known that by free body diagram the normal force can be determined, but the coefficient of friction is more
experimental, as previously mentioned, this information is here, and it has been achieved determine in three different
ways, these are; Critical angle, dynamometer, and angles that have been given in order to tabulate how much force
has been necessary for the body to move.
I. OBJETIVO
- Analizar cómo obtener experimentalmente el coeficiente de rozamiento estático o dinámico µ
entre distintas substancias que se encuentran en contacto y verificar las leyes de rozamiento.
- Identificar los tipos de rozamientos existentes entre superficies.
N=mg·cosθ (3)
μ=0.268 W
N ΣFy=0
F
N−Wy =0
Fr
α N=W ∗cos α
α
N=2.3∗cos 45
ΣFy=0 W
N=1.62
N−Wy =0 VI. ACTIVIDAD – PREGUNTAS
N=W ∗cos α Considerando la primera parte del experimento
realice los gráficos: Fuerza de tracción – Fuerza
N=2.3∗cos 15 Normal.
N=2.22
N
F
Fr
α
ANALISIS MATEMÁTICO
α
∆y
W m=
∆x
0.89−0.72
m=
ΣFy=0 4−3
N−Wy =0 m=0.17
N=W ∗cos α Calculamos la ecuación de la recta con la
ecuación punto pendiente.
N=2.3∗cos 30
P (3, 0.72)
N=1.99
y=m ( x−x 1 ) + y 1
y=0.17 ( x −3 ) +0.72
DCL --- 45º
y=0.17 x−0.51+0.72
N
F y=0.17 x+0.21
ANALISIS DE UNIDADES y=−0.03 x +0.12+0.21
F .Tracción y=−0.03 x +0.33
=x
F .N
( µ∗N ) ANALISIS DE UNIDADES
x=
N
F . Normal
x=µ X=
C . Rozamiento
Conclusión
N
X=
µ--- representa o hace referencia al coeficiente µ
de fricción o también llamado coeficiente de
rozamiento.
ANALISIS FÍSICO
ANALISIS MATEMÁTICO
∆y
m=
∆x
ANALISIS MATEMÁTICO
0.24−0.21
m=
3−4 ∆y
m=
m=−0.03 ∆x