Documentos de Académico
Documentos de Profesional
Documentos de Cultura
IT T
Ag./Irrigation,
Agr/Irrigación
Goulds Pumps
Ag-Flo
Cast Iron Bronze Fitted End-Suction Flanged
Pumps, Bombas horizontales con brida en hierro
fundido o hierro fundido y bronce
2
Performance Coverage, Campo de desempeño
METERS FEET
METROS PIES
350
105 1 x 2-7 (3500)
1 x 2-8 (3500)
11/2 x 2-6 (3500)
90 300 11/2 x 2-8 (3500)
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
2 x 2-5 (3500)
21/2 x 21/2-5 (3500)
250 21/2 x 3-7 (3500)
75 3 x 3-5 (3500)
11/2 x 2-8 3 x 4-7 (3500)
1 x 2-8 4 x 4-5 (3500)
60 200 5 x 5-6 (3500)
2 x 21/2-7 (1750)
2 x 21/2-7 (3500)
2 x 21/2-7
45 150 2 /2 x 3-7
1
30 100 3 x 4-7
11/2 x 2-6
1 x 2-7
2 x 21/2-7
15 50
3 x 3-5 5 x 5-6
2 x 2-5 4 x 4-5
21/2 x 21/2-5
0 0
0 100 200 300 400 500 600 700 800 900 1000 GPM
0 50 100 150 200 250 300 400 500 750 1000 m3/hr
CAPACITY (CAPACIDAD)
3
Goulds Pumps
Ag. / Irrigation
METERS FEET
METROS PIES
300
90 11/2 x 2-10 (1750)
21/2 x 3-8 (1750)
21/2 x 3-9 (1750)
80 21/2 x 3-10 (1750)
250
TOTAL DYNAMIC HEAD (CARGA DÍNAMICA TOTAL)
50
150
40
21/2 x 3-13
30 100
11/2 x 2-10
21/2 x 3-9 3 x 4-10
20 1 /4 x 1 /2-9 /2
1 1 1
50 21/2 x 3-7
10 2 x 21/2-7 3 x 4-8 21/2 x 3-10
0 0
0 100 200 300 400 500 600 GPM
4
Pump Reference Numbers, Pump Reference Numbers
The following Pump Reference Number is provided to help you quickly find The following Pump Reference Number is provided to help you quickly find
the performance curve, dimensions and price for your Ag-Flo selection. the performance curve, dimensions and price for your Ag-Flo selection. Pump
Pump curves are listed in discharge order and grouped by operating speed. curves are listed in discharge order and grouped by operating speed.
5
Goulds Pumps
Ag. / Irrigation
Model 1CC7MS / Size (Tamaño) 1 x 2 – 7 NOTE: Not recommended for operation Optional Impeller
beyond printed H-Q curve.
3500 RPM Curve (Curva) CN0724R00 NOTA: No se recomienda la operación más allá
Impulsor optativo
de la curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METERS FEET NPSH FEET (PIES)
Código de pedido Diá. Shaft Dia.
METROS PIES 40% EFF 46% 50% 6'
A 63/4'' DIA. 54% 56% A 6¾"
58% 8'
180 B 67⁄16
B 67/16 60% C 6
50
160
60% 10' 20' D 5¾
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
140 C6 58% E 5½
40 D 53/4 F 51⁄16 7
⁄8"
120 E 5 /2 1
G 413⁄16
H 49⁄16
30 100 F 51/16 56%
5 HP J 43⁄8
G 4 /16
13
0 0
0 20 40 60 80 100 U.S. GPM 120
0 5 10 15 20 25 m3/hr
CAPACITY (CAPACIDAD)
Model 1CC8MS / Size (Tamaño) 1 x 2 – 8 NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
3500 RPM Curve (Curva) CN0722R00 NOTA: No se recomienda la operación más allá de la
Impulsor optativo
METERS FEET curva impresa de H-Q (carga-capacidad).
METROS PIES Ordering Code Dia. Shaft Dia.
300 Código de pedido Diá. Shaft Dia.
90 A 81/16'' DIA. 30 35 40 4' NPSHR – FEET (PIES)
45 % EFF A 81⁄16"
50 6'
80 B 75⁄16
250 7
⁄8"
10' C 61⁄2
B 7 5/16
70
50 D 53⁄8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
40 D 53/8 71/2 HP
30 100
5 HP
3 HP
20
50
10
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 U.S. GPM
0 5 10 15 20 25 m3∨hr
CAPACITY (CAPACIDAD)
6
Performance Curves, Curvas de desempeño
Model 11/4CC91/2MS / Size (Tamaño) 11/4 x 11/2 – 91/2 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
3525 RPM Curve (Curva) Impulsor optativo
NOTA: No se recomienda la operación más allá
METERS FEET
METROS PIES
de la curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
150 500 Código de pedido Diá. Shaft Dia.
A 9½"
450 30 % EFF 40
A 91/2'' DIA. B 9
45 50
53 55 56
7
⁄8"
400 57 C 8½
B9 58
57 D 8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
350 56
E 7½
C 8 /2 1
100 30 HP
F 7
NPSH REQ 10
50 25
3500 RPM
0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 U.S. GPM
0 5 10 15 20 25 30 35 40 45 m3∨hr
CAPACITY (CAPACIDAD)
11/2CC6MS / Size (Tamaño) 11/2 x 2 – 6 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
3500 RPM Curve (Curva) CN0747R00 NOTA: No se recomienda la operación más allá de la curva
Impulsor optativo
impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METERS FEET
METROS PIES NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
A 515⁄16"
5.5' 7
⁄8"
50 40 6' B 51⁄8
50 7'
160 8'
60 65 10' 12'
NOTE: Pump will pass a sphere to
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
A 515/16" DIA.
5
⁄16" diameter.
72 14'
40 70 NOTA: La bomba dejará pasar una esfera
16'
73 18' de hasta 5⁄16 de pulgada de diámetro.
120 72
B 51/8" 70
30 65 % EFF
80
20 5 HP
40
10
3 HP
0 0
0 20 40 60 80 100 120 140 160 180 U.S. GPM
0 10 20 30 40 m3∨hr
CAPACITY (CAPACIDAD)
7
Goulds Pumps
Ag. / Irrigation
11/2CC6HMS / Size (Tamaño) 11/2 x 2 – 6H NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
3500 RPM Curve (Curva) CN0748R00 May utilize 1.15 motor service factor. Impulsor optativo
METERS FEET
H = High Head Impeller H = Impulsor de carga alta Ordering Code Dia. Shaft Dia.
NOTA: No se recomienda la operación más allá de la
METROS PIES NPSHR – FEET (PIES) curva impresa de H-Q (carga-capacidad). Código de pedido Diá. Shaft Dia.
5.5' 6' Puede utilizar factor de servicio 1.15.
A 515⁄16" 7
⁄8"
50 B 51⁄8
7'
160
40
50
NOTE: Pump will pass a sphere to
8' 5
⁄16" diameter.
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60
40 A 515/16" DIA. 65
67
10' NOTA: La bomba dejará pasar una esfera
120 B 5 /8" 5 12' de hasta 5⁄16 de pulgada de diámetro.
67
14'
30
16'
65
18'
80
60
20
50
40 % EFF
40
10
3H
P
0 0
0 20 40 60 80 100 120 140 160 U.S. GPM
0 10 20 30 m3∨hr
CAPACITY (CAPACIDAD)
Model 11/2CC8MS / Size (Tamaño) 11/2 x 2 – 8 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
3500 RPM NOTA: No se recomienda la operación más allá de la Impulsor optativo
curva impresa de H-Q (carga-capacidad).
METERS FEET Ordering Code Dia. Shaft Dia.
METROS PIES
NPSHR – FEET (PIES)
Código de pedido Diá. Shaft Dia.
8' 10' A 81⁄16"
12' 14'
300 40 50
60 16'
E 7¾
A 81/16" DIA.
E 73/4" 65
18'
B 75⁄8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
80 65
250 B 7 /8"
5
F 7
20' 7
⁄8"
22' C 6¾
F 7" 67 60
G 6¼
60 200 C 63/4"
70 H 61⁄8
G 61/4"
D 5¾
150 H 6 /8"
1
20
40 D 53/4"
50 % EFF
5
⁄16" diameter.
100 NOTA: La bomba dejará pasar una esfera
15
5
10
HP
20
HP
71
/2
50 HP
0 0
0 50 100 150 200 250 U.S. GPM
0 10 20 30 40 50 60 m3/hr
CAPACITY (CAPACIDAD)
8
Performance Curves, Curvas de desempeño
Model 11/2CC10MS / Size (Tamaño) 11/2 x 2 – 10 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
3500 RPM Curve (Curva) CN0207R01 NOTA: No se recomienda para funcionamiento Impulsor optativo
METERS FEET
METROS PIES superior al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
160
Código de pedido Diá. Shaft Dia.
500 A 101/16" DIA. 50 % EFF A 101⁄16"
8' 54 12' NPSHR – FEET (PIES)
10' B 93⁄16
140
58 14' 16' C 83⁄8
1¼"
400
B 93/16" 60 D 7¾
120 58
E 7¼
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
54
C 83/8" F 7
100
300 D 73/4" NOTE: Pump will pass a sphere to
40 HP
5
⁄32" diameter.
80 E 7 /4"
1
F 7"
NOTA: La bomba dejará pasar una esfera
30 HP de hasta 5⁄32 de pulgada de diámetro.
60 200
25 HP
20 HP
40
15 HP
100
3500 RPM
20
0 0
0 50 100 150 200 250 U.S. GPM 300
0 10 20 30 40 50 60 m3/hr
CAPACITY (CAPACIDAD)
2CC5MS / Size (Tamaño) 2 x 2-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 3450 Curve (Curva) CN0703R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
5' NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
30% EFF 43 50 55 6' A 4"
A 4" DIA. 60
50 64 B 37⁄8"
15 B 37/8"
7
⁄8"
7' C 31⁄2"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
D 31⁄4
9'
40
64 NOTE: Pump will pass a sphere to
C 31/2"
5
⁄32" diameter.
60
10 NOTA: La bomba dejará pasar una esfera
30 de hasta 5⁄32 de pulgada de diámetro.
D 31/4"
2
HP
20 11
/2
HP
5
1H
10 P
3
/4
0 0
0 20 40 60 80 100 120 140 160 U.S. GPM 180
0 10 20 30 m3∨hr 40
CAPACITY (CAPACIDAD)
9
Goulds Pumps
Ag. / Irrigation
Model 2CC7MS / Size (Tamaño) 2 x 21/ 2 – 7 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
3500 RPM Curve (Curva) NOTA: No se recomienda la operación más allá
Impulsor optativo
METERS FEET de la curva impresa de H-Q (carga-capacidad).
METROS PIES Ordering Code Dia. Shaft Dia.
220 Código de pedido Diá. Shaft Dia.
% EFF
A 7'' DIA. 40 50 60 65 68
200 70
72 73
A 7"
60
74 B 6½
180 74
B 61/2 74 C 6 7
⁄8"
50
160 73 D 5½
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
72
C6
70 E 5
140
68
40 20 HP NOTE: Pump will pass a sphere to
120 D 5 /2
1
40 40 12
10
8
20 NPSH REQ 20
4
0 0 0 0
0 50 100 150 200 250 300 350 400 450 U.S. GPM
0 20 40 60 80 100 m3∨hr
CAPACITY (CAPACIDAD)
21/2CC5MS / Size (Tamaño) 21/2 x 21/2-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 3450 Curve (Curva) CN0705R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
40% EFF 9' NPSHR – FEET (PIES)
50 A 43⁄16"
A 43/16" DIA. 60
50 65 B 315⁄16
15 11' 7
⁄8"
72 C 33⁄4
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
B 315/16" D 39⁄16
13'
40
NOTE: Pump will pass a sphere to
72
C 33/4" 5
⁄32" diameter.
10 NOTA: La bomba dejará pasar una esfera
30 65
de hasta 5⁄32 de pulgada de diámetro.
D 39/16" 60
20
3
5 H
P
2H
P
10 1 1/
1H 2
HP
P
0 0
0 40 80 120 160 200 240 280 320 U.S. GPM 360
0 10 20 30 40 50 60 70 m3∨hr 80
CAPACITY (CAPACIDAD)
10
Performance Curves, Curvas de desempeño
Model 21/2CC7MS / Size (Tamaño) 21/2 x 3 – 7 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
METERS FEET 3450 RPM Curve (Curva) CN0709R00 NOTA: No se recomienda para funcionamiento superior
Impulsor optativo
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
250 Código de pedido Diá. Shaft Dia.
70 6' NPSHR – FEET (PIES) A 71⁄16"
60 8' 10' B 67⁄8
A 71/16'' DIA. 64 12' 14'
68 C 6
60 200 B 6 /8'' 7
70
7
⁄8"
16' 18' D 57⁄16
71
71 E 43⁄4
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
50 70 F 41⁄16
150 C 6'' 68
NOTE: Pump will pass a sphere to
7
⁄16" diameter.
40
D 57/16'' NOTA: La bomba dejará pasar una esfera
15 HP
de hasta 7⁄16 de pulgada de diámetro.
30 100
E 4 /4''
3
F 41/16'' 10 HP
20
50
3500 RPM
7.5 HP
10 5 HP
0 0
0 50 100 150 200 250 300 350 400 U.S. GPM
0 10 20 30 40 50 60 70 80 90 m3∨hr
CAPACITY (CAPACIDAD)
Model 21/2CC8MS / Size (Tamaño) 21/2 x 3 – 8 NOTE: Not recommended for operation beyond printed H-Q curve. Optional Impeller
3500 RPM Curve (Curva) CN208R00 NOTA: No se recomienda para funcionamiento superior al impreso Impulsor optativo
en la curva H-Q.
Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
METERS FEET 6' NPSHR – FEET (PIES) 8' A 715⁄16"
METROS PIES 7'
73 B 77⁄16 11⁄4"
300 40% EFF 50 60 10'
65 70
A 7 /16" DIA.
15
75 12' C 73⁄16
78
80 D 613⁄16
15' 18'
250 B 77/16" E 63⁄8 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
78
75 F 63⁄16
73
C 73/16"
NOTE: Pump will pass a sphere to
60 200 D 6 /16"
13
70 5
⁄16" diameter.
E 63/8" NOTA: La bomba dejará pasar una esfera
F 63/16" 25 HP
de hasta 5⁄16 de pulgada de diámetro.
150 65
40
20 HP
60
100
15 HP
20
50
0 0
0 50 100 150 200 250 300 350 400 U.S. GPM
0 20 40 60 80 100 m3/hr
CAPACITY (CAPACIDAD)
11
Goulds Pumps
Ag. / Irrigation
Model 21/2CC9MS / Size (Tamaño) 21/2 x 3 – 9 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
3550 RPM Curve (Curva) CN0715R00 NOTA: No se recomienda para funcionamiento
Impulsor optativo
METERS FEET
METROS PIES superior al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
450 Código de pedido Diá. Shaft Dia.
90 K 101/16" DIA.
L 97/8" 60 % EFF K 101⁄16"
400 8' NPSHR – FEET (PIES) L 97⁄8
80 M 91/2" 65 10'
14' M 91⁄2 11⁄4"
68
70 350 16' N 81⁄2
70
20' P 83⁄16
N 81/2"
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60 300
P 83/16"
65 NOTE: Pump will pass a sphere to
5
⁄16" diameter.
50 250 NOTA: La bomba dejará pasar una esfera
60 HP de hasta 5⁄16 de pulgada de diámetro.
50 HP
40 200
40 HP
30 150 30 HP
20 HP 25 HP
20 100
10 50
0 0
0 100 200 300 400 500 600 700 U.S. GPM 800
Model 21/2CC10MS / Size (Tamaño) 21/2 x 3 – 10 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
3550 RPM Curve (Curva) CN0717R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
METERS FEET
METROS PIES al impreso en la curva H-Q.
Ordering Code Dia. Shaft Dia.
180
Código de pedido Diá. Shaft Dia.
10' NPSHR – FEET (PIES)
K 101⁄16"
160 12' 14' 16'
64 % EFF
L 95⁄8
500 72 18'
K 101/16" DIA. 70 74 20' N 9
140 11⁄4"
76 22' P 85⁄8
L 95/8"
400 N 9"
76 R 8
120 74
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
S 71⁄8
P 85/8"
100 NOTE: Pump will pass a sphere to
300 R 8" 75 HP
5
⁄16" diameter.
80
NOTA: La bomba dejará pasar una esfera
S 71/8" 60 HP de hasta 5⁄16 de pulgada de diámetro.
60 200 50 HP
40 HP
40 30 HP
100 25 HP
20
0 0
0 100 200 300 400 500 600 700 U.S. GPM 800
12
Performance Curves, Curvas de desempeño
3CC5MS / Size (Tamaño) 3 x 3-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 3450 Curve (Curva) CN350R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
40% EFF
52
Código de pedido Diá. Shaft Dia.
A 43/8" DIA. 60
A 43⁄8"
15 68 12' NPSHR – FEET (PIES)
50 B 43⁄16
74 C 4 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
14'
B 43/16"
D 313⁄16
40 E 35⁄8
74
10 C 4" 18' NOTE: Pump will pass a sphere to
5 5
⁄32" diameter.
68 HP
30
D 313/16" NOTA: La bomba dejará pasar una esfera
de hasta 5⁄32 de pulgada de diámetro.
20 E 35/8" 3
HP
5
2H
P
10
3500 RPM
0 0
0 50 100 150 200 250 300 350 400 U.S. GPM 450
0 20 40 60 80 m3∨hr 100
CAPACITY (CAPACIDAD)
Model 3CC7MS / Size 3 x 4-7 NOTE: Not recommended for operation beyond
printed H-Q curve. Optional Impeller
3500 RPM Curve (Curva) CN0727R00 May utilize 1.15 motor service factor. Impulsor optativo
NOTA: No se recomienda la operación más allá de la
METERS FEET curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METROS PIES
NPSHR – FEET (PIES)
Puede utilizar factor de servicio 1.15. Código de pedido Diá. Shaft Dia.
200
B 63⁄8"
60
6' D 51⁄2 7
⁄8"
175 8' E 51⁄8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
50 % EFF 50 10'
B 63/8" DIA.
60 65 68 70 12' NOTE: Pump will pass a sphere to
150 1
⁄2" diameter.
40 74 NOTA: La bomba dejará pasar una esfera
125 de hasta 1⁄2 de pulgada de diámetro.
70
D 51/2" 68
30 100
65
E 51/8"
75 15
HP
20
60
50 10
HP
50
10 7 1/
25
2 HP
0 0
0 100 200 300 400 500 600 U.S. GPM
13
Goulds Pumps
Ag. / Irrigation
Model 3CC8MS / Size (Tamaño) 3 x 4 – 8 NOTE: Not recommended for operation beyond printed
H-Q curve.
Optional Impeller
Impulsor optativo
METERS FEET 3500 RPM Curve (Curva) CN374R00 NOTA: No se recomienda para funcionamiento superior al impreso
METROS PIES en la curva H-Q. Ordering Code Dia. Shaft Dia.
300 Código de pedido Diá. Shaft Dia.
90 45% EFF 58 68 11' 13'
73
A 81/16" DIA. 76 A 81⁄16"
80 B 77⁄16
250 D 6¾
16' 21' NPSHR – FEET (PIES)
70 B 77/16"
76 E 63⁄8
1¼"
73
27'
F 515⁄16
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60 200 68 G 5½
D 63/4"
H 51⁄8
E 63/8" 58
50 J 45⁄8
150
F 515/16" NOTE: Pump will pass a sphere to
40 3
⁄8" diameter.
G 5 /2"
1
50
H 51/8"
100 de hasta 3⁄8 de pulgada de diámetro.
HP
30
40
HP
J 45/8" 30
20 HP
25
50 20 HP
HP
10 15
10 HP
7 1/ HP
2
HP
0 0
0 100 200 300 400 500 600 700 800 U.S. GPM 900
Model 3CC10MS / Size (Tamaño) 3 x 4 – 10 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
3550 RPM Impulsor optativo
METERS FEET NOTA: No se recomienda la operación más allá
METROS PIES de la curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
400
Código de pedido Diá. Shaft Dia.
60% EFF. 70
10' NPSHR – FEET (PIES)
74 76
11' G 91⁄8"
350 G 9 /8 DIA.
1
78
80 13'
H 8¾
100 H 83/4
15' J 89⁄16
300 J 8 /16
9
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
80 K 81⁄8
K 81/8 78
76 18' L 7¾ 1¼"
74
250 L 7 /54
3
M 7 /8
20'
M 75⁄8
70
N 71/4 N 7¼
200 P 71/16 60 P 71⁄16
R 63/4
50 R 6¾
150
NOTE: Pump will pass a sphere to
75 HP 1
⁄2" diameter.
100
60 HP
NOTA: La bomba dejará pasar una esfera
50 HP de hasta 1⁄2 de pulgada de diámetro.
40 HP
50
30 HP
0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200U.S. GPM
0 50 100 150 200 250 300 350 m3/hr
CAPACITY (CAPACIDAD)
14
Performance Curves, Curvas de desempeño
4CC5MS / Size (Tamaño) 4 x 4-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 3450 Curve (Curva) CN666R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
20
10' NPSHR – FEET (PIES) 14'
55% EFF
60 66
A 413⁄16"
60 18'
22' 70 B 45⁄8
A 413/16" DIA. 72 26' C 41⁄2 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
74 28'
15 50 B 4 /8"
5 74 72 D 43⁄16
70 E 4
C 41/2"
7 1∨2
40 HP NOTE: Pump will pass a sphere to
66 5
⁄32" diameter.
10 60 NOTA: La bomba dejará pasar una esfera
30
D 43/16" de hasta 5⁄32 de pulgada de diámetro.
E 4"
20
5H
5 P
10
3H
P
3500 RPM
0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 U.S. GPM
Model 4CC8MS / Size (Tamaño) 4 x 5 – 8 NOTE: Not recommended for operation beyond printed
H-Q curve.
Optional Impeller
3550 RPM Curve (Curva) CN0078R00 NOTA: No se recomienda para funcionamiento superior al impreso Impulsor optativo
METERS FEET en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
% EFF NPSHR – FEET (PIES)
275 50 60 20' A 77⁄8"
80 70 75
A 77/8" DIA. 78 80 B 7¾
250 B 73/4" 82
C 7 /2"
1 22' C 6½
70
225 24' D 63⁄16
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
D 71/4"
E 7 1¼"
60 200
E 7" 80 26' F 6¼
175 F 63/4" 78
30' G 6½
50 75
G 61/2" H 61⁄16
150 70
H 61/16" J 5¾
40
125
J 53/4" 60 NOTE: Pump will pass a sphere to
100
5
⁄16" diameter.
30
75
HP
NOTA: La bomba dejará pasar una esfera
75 60 de hasta 5⁄16 de pulgada de diámetro.
20 50 HP
HP
50 40
HP
10
25 30
HP
0 0
0 200 400 600 800 1000 1200 1400 1600 U.S. GPM
15
Goulds Pumps
Ag. / Irrigation
5CC6MS / Size (Tamaño) 5 x 5-6 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
METERS FEET
RPM 3450 Curve (Curva) CN669R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METROS PIES impreso en la curva H-Q.
70 Ordering Code Dia. Shaft Dia.
54% EFF 15' 60 18'
A 51/2" x 41/2" DIA.
62 NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
20 65 20'
68
A 51⁄2" x x 41⁄2"
B 55/16" x 45/16"
60 24' B 55⁄16 x 45⁄16
70
72 C 5 x 37⁄8 7
⁄4"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
10
0 0
0 100 200 300 400 500 600 700 800 900 1000 U.S. GPM
CAPACITY (CAPACIDAD)
40
NOTE: Pump will pass a sphere to
120 C 6 60 HP 1
⁄2" diameter.
NPSH IN METERS (NPSH METROS)
75
16
Performance Curves, Curvas de desempeño
Model 1CC7MS / Size (Tamaño) 1 x 2 – 7 NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
1750 RPM Impulsor optativo
NOTA: No se recomienda la operación más allá de la
curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METERS FEET Código de pedido Diá. Shaft Dia.
METROS PIES
A 6¾"
30% EFF
40% 52%
B 57⁄8
50 47% C 5¼
A 6 /4'' DIA.
3
15 D 413⁄16
2' NPSH
55% E 5½
B 67/16
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
40 C 6
F 51⁄16 7
⁄8"
4'
D 5 /4
3 55% G 413⁄16
18'
52%
H 49⁄16
10 30 E 51/2
J 43⁄8
F 51/16 47%
K 41⁄16
G 413/16
L 313⁄16
20 H 49/16
J 43/8 NOTE: Pump will pass a sphere to
K 41/16
5 .75 HP 3
⁄16" diameter.
L 313/16
1750 RPM
0 0
0 10 20 30 40 50 60 70
U.S. GPM
0 5 10 15 m3/hr
CAPACITY (CAPACIDAD)
Model 1CC8MS / Size (Tamaño) 1 x 2 – 8 NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
1750 RPM Curve (Curva) CN0723R00 Impulsor optativo
NOTA: No se recomienda la operación más allá de la
curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METERS FEET
METROS PIES Código de pedido Diá. Shaft Dia.
A 81⁄16"
20 25 30 35
70 A 81/16'' DIA. 40 B 75⁄16
20 NPSHR – FEET (PIES) 3’
7
⁄8"
45
C 61⁄2
4'
60 D 53⁄8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
B 7 5/16 45 % EFF
NOTE: Pump will pass a sphere to
15 50 3
⁄16" diameter.
C 61/2
NOTA: La bomba dejará pasar una esfera
de hasta 3⁄16 de pulgada de diámetro.
40
11
/2
HP
10
30 D 53/8
1H
P
20 3
/4
HP
5
1
/2 H
10 P
0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 U.S. GPM
0 2 4 6 8 10 12 14 16 m3∨hr
CAPACITY (CAPACIDAD)
17
Goulds Pumps
Ag. / Irrigation
Model 11/4CC91/2MS / Size (Tamaño) 11/4 x 11/2 – 91/2 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
1750 RPM Curve (Curva) Impulsor optativo
NOTA: No se recomienda la operación más allá
METERS FEET
METROS PIES
de la curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
35 120 Código de pedido Diá. Shaft Dia.
% EFF A 9½"
A 91/2'' DIA. 40 45
30 50
53
B 9
100 55
56
7
⁄8"
57
57
C 8½
B9
25 D 8
57
56
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
80 C 81/2 55
5 HP
E 7½
53
F 7
20 20
5 5
NPSH REQ
10
0 0 0 0
0 20 40 60 80 100 120 140 U.S. GPM
0 5 10 15 20 25 30 m3∨hr
CAPACITY (CAPACIDAD)
11/2CC6MS / Size (Tamaño) 11/2 x 2 – 6 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
1750 RPM Curve (Curva) CN0749R00 Impulsor optativo
NOTA: No se recomienda la operación más allá de la
METERS FEET
curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METROS PIES Código de pedido Diá. Shaft Dia.
NPSHR – FEET (PIES)
A 515⁄16"
% EFF 50 3' 7
⁄8"
35 60 B 51⁄8
A 515/16" DIA. 65
10 68 4' NOTE: Pump will pass a sphere to
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
5
⁄16" diameter.
30
68 NOTA: La bomba dejará pasar una esfera
5'
8
B 51/8" de hasta 5⁄16 de pulgada de diámetro.
65
25
9'
60
6 20
50
15
4
3 4
/
HP
10
2 /12
HP
5
0 10 20 30 40 50 60 70 80 90 U.S. GPM
0 5 10 15 20 m3∨hr
CAPACITY (CAPACIDAD)
18
Performance Curves, Curvas de desempeño
11/2CC6HMS / Size (Tamaño) 11/2 x 2 – 6H NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
1750 RPM Curve (Curva) CN0750R00 NOTA: No se recomienda la operación más allá de la
Impulsor optativo
H = High Head Impeller H = Impulsor de carga alta
METERS FEET curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METROS PIES
Código de pedido Diá. Shaft Dia.
NPSHR – FEET (PIES)
A 515⁄16"
% EFF 40
7
⁄8"
35
3'
B 51⁄8
50
10 55
A 515/16" DIA. 60 66 NOTE: Pump will pass a sphere to
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
30
4' 5
⁄16" diameter.
9 B 55/8"
NOTA: La bomba dejará pasar una esfera
8 5'
de hasta 5⁄16 de pulgada de diámetro.
25
7 66
6'
60
6 20
55 7'
5 50
15
4
3 10
1 2
/
HP
1750 RPM
2
5
0 10 20 30 40 50 60 70 80 U.S. GPM
0 5 10 15 20 m3∨hr
CAPACITY (CAPACIDAD)
Model 11/2CC8MS / Size (Tamaño) 11/2 x 2 – 8 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
1750 RPM Curve (Curva) CN0729R00 Impulsor optativo
NOTA: No se recomienda la operación más allá de la
METERS FEET
curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METROS PIES
NPSHR – FEET (PIES)
Código de pedido Diá. Shaft Dia.
A 81⁄16"
70 % EFF 50 60 C 75⁄8
70 3' 7
⁄8"
20 A 81/16" DIA. E 63⁄4
5'
G 53⁄4
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60
C 75/8" 7'
72 NOTE: Pump will pass a sphere to
70
5
⁄16" diameter.
15 50 11'
NOTA: La bomba dejará pasar una esfera
E 63/4" de hasta 5⁄16 de pulgada de diámetro.
2
H 60
40 P
10 G 53/4" 11
/2
30 HP
20 1
5 H
P
/34
HP
10
0 20 40 60 80 100 120 140 160 U.S. GPM
0 10 20 30 40 m3∨hr
CAPACITY (CAPACIDAD)
19
Goulds Pumps
Ag. / Irrigation
Model 11/2CC10MS / Size (Tamaño) 11/2 x 2 – 10 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
Impulsor optativo
METERS FEET
METROS PIES 1750 RPM NOTA: No se recomienda para funcionamiento
superior al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
120
30% EFF 5' NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
35 35
40 A 101⁄16"
110 A 101/16" DIA. 42
45 6'
47
48 B 93⁄16
30 100 C 83⁄8 7
⁄8"
B 93/16" D 83⁄4
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
90 48
7'
47 F 7
25 45
80
C 83/8" 42 NOTE: Pump will pass a sphere to
5
⁄32" diameter.
70 40
20 D 73/4" NOTA: La bomba dejará pasar una esfera
de hasta 5⁄32 de pulgada de diámetro.
60
35
F 7"
15 50
5
HP
40
10
30
20
2
5
3
HP
HP
10
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 U.S. GPM
0 5 10 15 20 25 30 35 m3/hr
CAPACITY (CAPACIDAD)
2CC5MS / Size (Tamaño) 2 x 2-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 1725 Curve (Curva) CN0704R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
30% EFF
40 A 4"
48
4 52
A 4" DIA. C 31⁄2 7
⁄8"
56
D 31⁄4
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
30
0 0
0 10 20 30 40 50 60 70 80 U.S. GPM
0 5 10 15 m3∨hr 20
CAPACITY (CAPACIDAD)
20
Performance Curves, Curvas de desempeño
Model 2CC7MS / Size (Tamaño) 2 x 21/ 2 – 7 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
1750 RPM Curve (Curva) NOTA: No se recomienda la operación más allá
Impulsor optativo
METERS FEET de la curva impresa de H-Q (carga-capacidad).
METROS PIES Ordering Code Dia. Shaft Dia.
60 Código de pedido Diá. Shaft Dia.
% EFF A 7"
16 A 7'' DIA. 40 50 55
50
60 65 B 6½
67 68
69 69.5
C 6 7
⁄8"
14
B 61/2
D 5½
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
69
4 40 4
10 10
1 HP
2 NPSH REQ 2
1750 RPM
0 0 0 0
0 50 100 150 200 250 U.S. GPM
0 10 20 30 40 50 m3∨hr
CAPACITY (CAPACIDAD)
21/2CC5MS / Size (Tamaño) 21/2 x 21/2-5 NOTE: Not recommended for operation beyond printed
H-Q curve. Optional Impeller
RPM 1725 Curve (Curva) CN0706R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
40% EFF 4' NPSHR – FEET (PIES)
50
60 A 43⁄16"
4 A 43/16" DIA. 64 4.5'
B 315⁄16
67 7
⁄8"
C 33⁄4
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
67
B 315/16" 5' D 39⁄16
3 10 64
C 33/4"
NOTE: Pump will pass a sphere to
6'
5
⁄32" diameter.
60
NOTA: La bomba dejará pasar una esfera
1
de hasta 5⁄32 de pulgada de diámetro.
/2
2 D 39/16" HP
5
1 1
/4 /3
HP HP
1
0 0
0 20 40 60 80 100 120 140 160 U.S. GPM 180
0 10 20 30 m3∨hr 40
CAPACITY (CAPACIDAD)
21
Goulds Pumps
Ag. / Irrigation
Model 21/2CC7MS / Size (Tamaño) 21/2 x 3 – 7 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
METERS FEET 1750 RPM Curve (Curva) CN0711R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
60
18 Código de pedido Diá. Shaft Dia.
60 3' NPSHR – FEET (PIES)
64 66
A 71⁄16"
A 71/16" DIA.
16 68
70 4'
5'
B 67⁄8
B 67/8"
50
C 6
70 7
⁄8"
14 68 6' D 57⁄16
66
E 43⁄4
64
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
12 40 C 6'' F 41⁄16
NOTE: Pump will pass a sphere to
10 D 57/16''
7
⁄16" diameter.
30 NOTA: La bomba dejará pasar una esfera
2 HP
de hasta 7⁄16 de pulgada de diámetro.
8
E 43/4''
6 20 11/2 HP
F 41/16''
4 1 HP
3 /4 HP
10
2 1/2 HP
0 0
0 20 40 60 80 100 120 140 160 180 200 U.S. GPM
0 5 10 15 20 25 30 35 40 45 m3∨hr
CAPACITY (CAPACIDAD)
Model 21/2CC8MS / Size (Tamaño) 21/2 x 3 – 8 NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
Impulsor optativo
METERS FEET 1750 RPM NOTA: No se recomienda para funcionamiento superior
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
70
A 715/16" DIA. 50% EFF 55 4' 60 6' NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
64
20
65 66
A 715⁄16"
8'
B 77⁄16
68
60 B 77/16" C 73⁄16 7
⁄8"
66 9'
D 613⁄16
55 C 73/16"
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
64 10' F 63⁄16
15 50 D 613/16" NOTE: Pump will pass a sphere to
11'
60 5
⁄16" diameter.
45 NOTA: La bomba dejará pasar una esfera
55
de hasta 5⁄16 de pulgada de diámetro.
40 F 63/16"
50
35
10
30 5 HP
25
3 HP
20
2 HP
5
15
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 U.S. GPM
0 10 20 30 40 50 60 70 m3/hr
CAPACITY (CAPACIDAD)
22
Performance Curves, Curvas de desempeño
Model 21/2CC9MS / Size (Tamaño) 21/2 x 3 – 9 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve. Impulsor optativo
1750 RPM Curve (Curva) CN0716R00 NOTA: No se recomienda para funcionamiento
METERS FEET
METROS PIES superior al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
120 Código de pedido Diá. Shaft Dia.
A 101⁄16"
A&K 10 /16" DIA.
1
64 % EFF 65 B 97⁄8
4' NPSHR – FEET (PIES)
100 B&L 97/8" 3' 66 68 C 91⁄2 7
⁄8"
30
70
C 9 /2"
1
8'
D 81⁄2
5' E 83⁄16
70
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
80 68 K 101⁄16
66
11⁄4"
D 8 /2"1
L 97⁄8
E 8 /16"
3
1750 RPM
20
0 0
0 50 100 150 200 250 300 350 U.S. GPM 400
0 10 20 30 40 50 60 70 80 90 m3∨hr 100
CAPACITY (CAPACIDAD)
Model 21/2CC10MS / Size (Tamaño) 21/2 x 3 – 10 NOTE: Not recommended for operation beyond Optional Impeller
METERS FEET printed H-Q curve.
METROS PIES
1750 RPM Curve (Curva) CN0751R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
al impreso en la curva H-Q.
Ordering Code Dia. Shaft Dia.
130
Código de pedido Diá. Shaft Dia.
35 62 % EFF 6' NPSHR – FEET (PIES)
120 A&K 101/16" DIA. 65 A 101⁄16"
70
8'
110 72 B 91⁄2
30 10'
7
⁄8"
B&M 91/2" 72 C 81⁄4
100
70 D 71⁄8
25 90 K 101⁄16
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
11⁄4"
65 M 91⁄2
80 C 8 /4"
1
20
NOTE: Pump will pass a sphere to
70
10 HP
5
⁄16" diameter.
60 D 71/8" 71/2 HP
NOTA: La bomba dejará pasar una esfera
15 de hasta 5⁄16 de pulgada de diámetro.
50
40
5 HP
10
3 HP
30
20
5
10
0 0
0 50 100 150 200 250 300 350 400 U.S. GPM
0 10 20 30 40 50 60 70 80 90 m3∨hr
CAPACITY (CAPACIDAD)
23
Goulds Pumps
Ag. / Irrigation
Model 21/2CC13MS / Size (Tamaño) 21/2 x 3 – 13 NOTE: Not recommended for operation beyond
printed H-Q curve.
Optional Impeller
1750 RPM Curve (Curva) CN0104R00 NOTA: No se recomienda para funcionamiento Impulsor optativo
superior al impreso en la curva H-Q.
Ordering Code Dia. Shaft Dia.
METERS FEET
METROS PIES Código de pedido Diá. Shaft Dia.
8' NPSHR – FEET (PIES) A 131⁄16"
% EFF
60 50 B 12¾
200 55
60
A 131/16" DIA. 12' C 117⁄8
63 1¼"
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
40
20
10
HP
15
20
10
HP
HP
0 0
0 100 200 300 400 500 600 700 800 U.S. GPM
3CC5MS / Size (Tamaño) 3 x 3-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 1725 Curve (Curva) CN351R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
40% EFF 50 4' NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
60
68
A 4 / " DIA.
3 8
A 43⁄8"
4 74
6' B 43⁄16
C 4 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
B 43/16"
D 313⁄16
3 10 E 35⁄8
10'
74
C 4" NOTE: Pump will pass a sphere to
5
⁄32" diameter.
68
D 313/16"
NOTA: La bomba dejará pasar una esfera
2 1
/2 de hasta 5⁄32 de pulgada de diámetro.
HP
5 E 35/8"
1
/3
HP
1 1
/4
HP
0 0
0 25 50 75 100 125 150 175 200 U.S. GPM 225
0 10 20 30 40 m3∨hr 50
CAPACITY (CAPACIDAD)
24
Performance Curves, Curvas de desempeño
Model 3CC7MS / Size (Tamaño) 3 x 4 – 7 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
1750 RPM Curve (Curva) CN0728R00 NOTA: No se recomienda la operación más allá de la
Impulsor optativo
METERS FEET
curva impresa de H-Q (carga-capacidad). Ordering Code Dia. Shaft Dia.
METROS PIES
NPSHR – FEET (PIES)
Código de pedido Diá. Shaft Dia.
A 71⁄16"
50
B 63⁄8
15 4'
7
⁄8"
5' C 6
A 7 /16" DIA.
1 35 48
E 51⁄8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60
65 8'
40 67 NOTE: Pump will pass a sphere to
16'
B 63/8" 67
1
⁄2" diameter.
65
10 NOTA: La bomba dejará pasar una esfera
C 6"
30 de hasta 1⁄2 de pulgada de diámetro.
60 % EFF
E 51/8"
3
20 HP
5
2
HP
10 1 1/
1H
2
HP
P
1750 RPM
0 0
0 50 100 150 200 250 300 350 U.S. GPM
0 10 20 30 40 50 60 70 80 90 m3∨hr
CAPACITY (CAPACIDAD)
Model 3CC8MS / Size (Tamaño) 3 x 4 – 8 NOTE: Not recommended for operation beyond printed
H-Q curve.
Optional Impeller
METERS FEET
1750 RPM Curve (Curva) CN375R00 NOTA: No se recomienda para funcionamiento superior al impreso Impulsor optativo
METROS PIES en la curva H-Q.
100
Ordering Code Dia. Shaft Dia.
30 Código de pedido Diá. Shaft Dia.
A 81⁄16"
C 77⁄16
25
80 D 6¾
NPSHR – FEET (PIES) 4'
45% EFF 58
68 73 E 63⁄8 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
76
A 81/16" DIA. 6' F 515⁄16
20
76 8'
G 5½
60
C 77/16"
73
68 H 51⁄8
58
J 45⁄8
15
D 63/4" NOTE: Pump will pass a sphere to
40 E 63/8"
3
⁄8" diameter.
7
1 2
/
0 10 20 30 40 50 60 70 80 90 m3/hr 100
CAPACITY (CAPACIDAD)
25
Goulds Pumps
Ag. / Irrigation
Model 3CC10MS / Size (Tamaño) 3 x 4 – 10 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve. Impulsor optativo
1750 RPM Curve (Curva) CN0096R00 NOTA: No se recomienda para funcionamiento
METERS
superior al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
FEET
METROS PIES NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
% EFF A 101⁄16"
50 60 6' 8' 11⁄4"
70 75 78 B 93⁄4
110 A 101/16" DIA. 10'
80 12'
C 9
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
B 93/4"
30 100 D 85⁄8
80 7
⁄8"
E 81⁄8
90 78
C 9" 75 F 75⁄8
15'
25
80 D 85/8"
70 NOTE: Pump will pass a sphere to
1
⁄2" diameter.
70 E 81/8"
20 NOTA: La bomba dejará pasar una esfera
60
60 F 75/8" de hasta 1⁄2 de pulgada de diámetro.
50
15 50
40
10
30
15
HP
5
20
H
5
P
10
7
∨ 1 2
HP
H
0 10
P
0 100 200 300 400 500 600 700 800 U.S. GPM
Model 3CC13MS / Size (Tamaño) 3 x 4 – 13 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve. Impulsor optativo
1750 RPM Curve (Curva) CN0112R00 NOTA: No se recomienda para funcionamiento superior
al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
METERS FEET
METROS PIES Código de pedido Diá. Shaft Dia.
A 131⁄16"
NPSHR – FEET (PIES) 4'
C 125⁄16
60 200 5'
60 % EFF 70 E 11¾
75
6' 1¼"
180 A 131/16" DIA. G 10¾
50 78 J 91⁄8
8'
160 78
C 125/16" L 8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
75
140 E 113/4"
40 70 10'
12' NOTE: Pump will pass a sphere to
3
⁄8" diameter.
120
G 103/4"
60 NOTA: La bomba dejará pasar una esfera
30 100 de hasta 3⁄8 de pulgada de diámetro.
50
J 91/8"
80
30
20 HP
60 L 8"
25
40 HP
10 20
HP
20 15
7 1/ 10 HP
2
HP HP
0 0
0 100 200 300 400 500 600 700 800 U.S. GPM 900
26
Performance Curves, Curvas de desempeño
4CC5MS / Size (Tamaño) 4 x 4-5 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 1725 Curve (Curva) CN667R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
NPSHR – FEET (PIES) 3' 4'
60% EFF 64
Código de pedido Diá. Shaft Dia.
70 72
6' A 413⁄16"
14 A 4 /16" DIA.
13
B 45/8"
8' B 45⁄8
4 10'
C 41⁄2 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
12
C 4 /2"
1 72 D 43⁄16
70 E 4
3 10
NOTE: Pump will pass a sphere to
64 5
⁄32" diameter.
8
D 43/16"
60 NOTA: La bomba dejará pasar una esfera
2 E 4" de hasta 5⁄32 de pulgada de diámetro.
6
3
/4 HP
4
1 1
/2 HP
1750 RPM
0 0
0 50 100 150 200 250 300 U.S. GPM 350
0 10 20 30 40 50 60 70 m3∨hr
CAPACITY (CAPACIDAD)
Model 4CC8MS / Size (Tamaño) 4 x 5 – 8 NOTE: Not recommended for operation beyond printed
H-Q curve.
Optional Impeller
Impulsor optativo
METERS FEET
METROS PIES
1750 RPM NOTA: No se recomienda para funcionamiento superior al impreso
en la curva H-Q. Ordering Code Dia. Shaft Dia.
70 6' NPSHR – FEET (PIES) Código de pedido Diá. Shaft Dia.
50% EFF 60
20 70
75
8' A 77⁄8"
65 A 77/8" DIA. 78
80 82 C 6½
60 C 71/2" D 7¼ 7
⁄8"
F 6¾
55 D 71/4" 10'
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
82 G 6½
80 11'
15 50 J 5¾ 1¼"
78
F 6 /4"
3
45
NOTE: Pump will pass a sphere to
75 5
⁄16" diameter.
12'
40 G 1
70 NOTA: La bomba dejará pasar una esfera
6 /2"
de hasta 5⁄16 de pulgada de diámetro.
60
35
10
J 5 3/4"
30
25
3
10
HP
7
/1 2
HP
HP
20
5
5
HP
15
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 U.S. GPM
27
Goulds Pumps
Ag. / Irrigation
Model 4CC10MS / Size (Tamaño) 4 x 6 – 10 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
1750 RPM Curve (Curva) CN0720R00 NOTA: No se recomienda para funcionamiento superior
Impulsor optativo
METERS FEET al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
METROS PIES Código de pedido Diá. Shaft Dia.
35
8' NPSHR – FEET (PIES) K 101⁄16"
110 60 70 75 L 99⁄16 11⁄4"
K 101/16'' DIA.
82
M 81⁄8
30 100 80
83
NOTE: Pump will pass a sphere to
10' 7
⁄16" diameter.
90 L 9 /16'' 9
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
83
14' NOTA: La bomba dejará pasar una esfera
25 de hasta 7⁄16 de pulgada de diámetro.
80 82
80
70
20 M 8 /8''
1
75
60
15 50
20
40 HP
15
10
HP
10
30
HP
0 0
0 200 400 600 800 1000 1200 U.S. GPM
Model 4CC13MS / Size (Tamaño) 4 x 6 – 13 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
METERS FEET 1750 RPM Curve (Curva) CN0698R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
200
60 Código de pedido Diá. Shaft Dia.
6' NPSHR – FEET (PIES) 8'
K 131/16'' DIA.
76
10' 12'
K 131⁄16"
180
80
82 L 121⁄2
L 121/2''
50 160
M 1111⁄16
82
11⁄4"
M 1111/16''
84 N 111⁄16
80
140 76
P 101⁄4
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
N 111/16''
40 Q 93⁄8
50 HP
120 NOTE: Pump will pass a sphere to
P 101/4''
7
⁄16" diameter.
30 100 Q 93/8'' NOTA: La bomba dejará pasar una esfera
40 HP
de hasta 7⁄16 de pulgada de diámetro.
30 HP
80
25 HP
20
60 20 HP
15 HP
40
10
20
0 0
0 200 400 600 800 1000 1200 U.S. GPM
28
Performance Curves, Curvas de desempeño
Model 4CC16MS / Size (Tamaño) 4 x 6 – 16 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
METERS FEET 1780 RPM Curve (Curva) CN0447R01 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METROS PIES impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
350 Código de pedido Diá. Shaft Dia.
70
60% EFF. 5' NPSHR – FEET (PIES) A 16"
A 16" DIA. 65 B 155⁄8
300 70
60 B 155/8" 73
6' 74 C 153⁄16 15⁄8"
C 15 /16"
3
74
8' 73 D 14½
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
250
50 D 141/2"
10' E 13¾
E 133/4"
NOTE: Pump will pass a sphere to
200 10 5
⁄8" diameter.
40 0H
P
NOTA: La bomba dejará pasar una esfera
de hasta 5⁄8 de pulgada de diámetro.
75
30 150 HP
60
HP
20 100
10 50
1750 RPM
0 0
0 200 400 600 800 1000 1200 U.S. GPM 1400
0 100 200 300 400 500 600 700 800 900 m3/ hr
CAPACITY (CAPACIDAD)
5CC6MS / Size (Tamaño) 5 x 5-6 NOTE: Not recommended for operation beyond printed Optional Impeller
H-Q curve.
RPM 1725 Curve (Curva) CN671R00 NOTA: No se recomienda para funcionamiento superior al Impulsor optativo
METERS FEET impreso en la curva H-Q.
METROS PIES Ordering Code Dia. Shaft Dia.
Código de pedido Diá. Shaft Dia.
7' NPSHR – FEET (PIES)
18 8' A 51⁄2" x x 41⁄2"
50% EFF 60
A 51/2" x 41/2" DIA. B 55⁄16 x 45⁄16
5 65
16 B 55/16" x 45/16" 68 70 C 5 x 37⁄8 7
⁄8"
TOTAL DYNAMIC HEAD (CARGA DINAMICA TOTAL)
9'
14
D 5 x 39⁄16
4 C 5" x 37/8" E 5 x 31⁄32
12 D 5" x 39/16" 70
NOTE: Pump will pass a sphere to
68
11∨2 HP
5
⁄32" diameter.
3 10 E 5" x 3 / " 1 32
65
NOTA: La bomba dejará pasar una esfera
8
de hasta 5⁄32 de pulgada de diámetro.
2
6 1 HP
4
1
0 0
0 50 100 150 200 250 300 350 400 450 500 U.S. GPM
0 25 50 75 100 m3∨hr
CAPACITY (CAPACIDAD)
29
Goulds Pumps
Ag. / Irrigation
10
5 HP 30
4 3 HP
10 20
5
2 NPSH REQ
10
0 0 0 0
0 200 400 600 800 1000 1200 U.S. GPM
Model 6CC91/ 2MS / Size (Tamaño) 6 x 8 – 91/ 2 NOTE: Not recommended for operation
beyond printed H-Q curve.
Optional Impeller
1770 RPM Curve (Curva) NOTA: No se recomienda la operación más allá Impulsor optativo
METERS FEET de la curva impresa de H-Q (carga-capacidad).
METROS PIES Ordering Code Dia. Shaft Dia.
30 100
Código de pedido Diá. Shaft Dia.
% EFF
90
A 91/2'' DIA. 60 65 70
A 9½"
75
25 80
83
B 9
80
85
B9 C 8½ 7
⁄8"
NPSH IN METERS (NPSH METROS)
70 83
D 8
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
20 C 81/2 80
E 7½
NPSH IN FEET (NPSH PIES)
60
75
D8 NOTE: Pump will pass a sphere to
15 50
40 HP 5
⁄32" diameter.
E 71/2
40 30 HP NOTA: La bomba dejará pasar una esfera
10 70
25 HP
de hasta 5⁄32 de pulgada de diámetro.
30 40
20 HP
10
20 15 HP 30
5
10 NPSH REQ 20
5
0 0 10
0 0
0 500 1000 1500 2000 2500 3000 U.S. GPM
30
Performance Curves, Curvas de desempeño
Model 6CC13MS / Size (Tamaño) 6 x 8 – 13 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
METERS FEET RPM 1780 Curve (Curva) CN0697R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
250 Código de pedido Diá. Shaft Dia.
4' NPSHR – FEET (PIES)
70 U 13"
200
60% EFF. 70 5' V 125⁄16
74 78 82 7'
60
U 13" DIA. W 115⁄8 15⁄8"
175 84
85
X 10 ⁄8
7
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
V 125/16"
9'
Z 10
50 150 85 11'
M&W 115/8" 84 M 115⁄8
125
82 N 107⁄8 11⁄4"
N&X 107/8"
40 Q 10
Q&Z 10" 75
100 HP NOTE: Pump will pass a sphere to
30 60
7
⁄8" diameter.
HP
75 NOTA: La bomba dejará pasar una esfera
de hasta 7⁄8 de pulgada de diámetro.
20 40 50
50 HP HP
30
HP
10
1750 RPM
25
0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 U.S. GPM
0 50 100 150 200 250 300 350 400 450 500 m 3∨hr
CAPACITY (CAPACIDAD)
Model 8CC13MS / Size (Tamaño) 8 x 10 – 13 NOTE: Not recommended for operation beyond Optional Impeller
printed H-Q curve.
METERS FEET RPM 1750 Curve (Curva) CN0707R00 NOTA: No se recomienda para funcionamiento superior Impulsor optativo
METROS PIES al impreso en la curva H-Q. Ordering Code Dia. Shaft Dia.
180 Código de pedido Diá. Shaft Dia.
64 11' NPSHR – FEET (PIES)
U 13'' DIA. 70
75
50
78
80
U 13"
160 14' 84
17' W 1115⁄16
15⁄8"
20' X 107⁄8
W 1115/16''
140 Y 913⁄16
40 84
NOTE: Pump will pass a sphere to
24'
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
120 X 107/8'' 7
⁄8" diameter.
80 NOTA: La bomba dejará pasar una esfera
30 100 de hasta 7⁄8 de pulgada de diámetro.
Y 913/16''
150 HP
80
125 HP
20
60 100 HP
75 HP
40
60 HP
10
20
0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 U.S. GPM
0 100 200 300 400 500 600 700 800 900 1000 1100 m3∨hr
CAPACITY (CAPACIDAD)
31
Goulds Pumps
Ag. / Irrigation
55
350 3200 RPM
100
3000 RPM
300
2800 RPM 30 HP
75 250
2600 RPM 25 HP
1800 RPM 10 HP
100 1600 RPM
7.5 HP
25
5 HP
50
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 U.S. GPM
0 10 20 30 40 50 m3/hr
CAPACITY (CAPACIDAD)
Model 11/2SAE10MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
Size (Tamaño) 11/2 x 2 – 10 (Velocidad variable) NOTA: No se recomienda para funcionamiento
FEET
PIES
101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0733R00 superior al impreso en la curva H-Q.
30
NPSHR – FEET (PIES)
20
10
400 0
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
30% EFF.
35
300 40
45
50
2400 RPM
200
2200 RPM 45
2000 RPM
1800 RPM
100 1600 RPM 10
HP
5
HP
0
0 25 50 75 100 125 150 175 200
CAPACITY (CAPACIDAD) U.S. GPM
32
Performance Curves, Curvas de desempeño
Model 21/2SAE8MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
Size (Tamaño) 21/2 x 3 – 8 (Velocidad variable) NOTA: No se recomienda para funcionamiento
FEET
PIES 715/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0734R00 superior al impreso en la curva H-Q.
250 30
50% EFF.
60
65
150 70
2400 RPM 75
2200 RPM
100 2000 RPM 10
HP
7.5
1800 RPM HP
1600 RPM
5H
P
50 3H
P
Variable
Speed
0
0 50 100 150 200 250 300 350 400 U.S. GPM 450
CAPACITY (CAPACIDAD)
400
30
20
10
350 0
300
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60% EFF.
250
66
1800 RPM 60
100 1600 RPM
20
15 HP
50 HP
10
HP
0
0 100 200 300 400 500 600 U.S. GPM 700
CAPACITY (CAPACIDAD)
33
Goulds Pumps
Ag. / Irrigation
Model 21/2SAE10MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
Size (Tamaño) 21/2 x 3 – 10 (Velocidad variable) NOTA: No se recomienda para funcionamiento
FEET 101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0736R00 superior al impreso en la curva H-Q.
300
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60% EFF.
250 65
2400 RPM
68
200
2200 RPM
65
2000 RPM
150 60
1800 RPM
0
0 100 200 300 400 500 600 700 U.S. GPM 800
CAPACITY (CAPACIDAD)
400 30
2400 RPM 20
50% EFF.
60 10
350 0
63
2200 RPM
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
300 65
2000 RPM
250 63
1800 RPM 60
200
50
1600 RPM HP
150 50
40
HP
100 30
25 HP
20 HP
15 HP
50 HP
0
0 100 200 300 400 500 600 U.S. GPM 700
CAPACITY (CAPACIDAD)
34
Performance Curves, Curvas de desempeño
Model 3SAE10MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET
Size (Tamaño) 3 x 4 – 8 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES 81/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0738R00 al impreso en la curva H-Q.
300
250
20
10
200 0
58% EFF.
68
73 76
150
2400 RPM
2200 RPM 73
68
100 2000 RPM
58
1800 RPM
20
15 HP
50 1600 RPM HP
5 10
HP
Variable
7. HP
5
Speed
HP
0
0 100 200 300 400 500 600 700 800 U.S. GPM 900
CAPACITY (CAPACIDAD)
Model 3SAE10MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET
Size (Tamaño) 3 x 4 – 10 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES
91/8 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0739R00 al impreso en la curva H-Q.
400
30
NPSHR – FEET (PIES)
350 20
10
300 0
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
250
60% EFF. 70
200 75 78
2400 RPM 80
78
150 2200 RPM 75
2000 RPM 70
60
100 1800 RPM
1600 RPM
50 30
20 HP
HP
10 HP 15 HP
0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400
CAPACITY (CAPACIDAD) U.S. GPM
35
Goulds Pumps
Ag. / Irrigation
Model 3SAE13MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET Size (Tamaño) 3 x 4 – 13 (Velocidad variable) NOTA: No se recomienda para funcionamiento
PIES 131/16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0740R00 superior al impreso en la curva H-Q.
500
75
60
250 2000 RPM
50
200 1800 RPM
12
1600 RPM
0
150
HP
10
0
100
HP
75
60 HP
50 HP
50 40 HP
30 HP
20 HP
HP
0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400
CAPACITY (CAPACIDAD) U.S. GPM
Model 4SAE8MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
Size (Tamaño) 4 x 5 – 8 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
FEET
PIES 77/8 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0741R00 al impreso en la curva H-Q.
250
30
NPSHR – FEET (PIES)
20
10
200 0
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
50% EFF.
60
70
150 75
80
2400 RPM
82
2200 RPM
100
2000 RPM 80
1800 RPM 75
1600 RPM
50 70
25
20 HP
15 HP
10 HP
7 1∨2 HP
HP
0
0 200 400 600 800 1000 1200 1400 U.S. GPM 1600
CAPACITY (CAPACIDAD)
36
Performance Curves, Curvas de desempeño
Model 4SAE10MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET
Size (Tamaño) 4 x 6 – 10 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES 101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0742R00 al impreso en la curva H-Q.
200
80
125
1800 RPM
75
100
1600 RPM
50
HP
75 40
HP
30
HP
50
20
15 HP
HP
25
Variable
Speed
0
0 200 400 600 800 1000 1200 1400 U.S. GPM 1600
CAPACITY (CAPACIDAD)
Model 4SAE13MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET Size (Tamaño) 4 x 6 – 13 (Velocidad variable) NOTA: No se recomienda para funcionamiento
PIES 131/16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0743R00 superior al impreso en la curva H-Q.
400 30
NPSHR – FEET (PIES)
20
78
2400 RPM 60% EFF. 10
350
82 0
82
300 2200 RPM 78
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
72
250 2000 RPM
1800 RPM
200
60
1600 RPM
150
12
5
HP
100
10
0
HP
60 75
50 50 HP HP
40 HP
HP
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200
CAPACITY (CAPACIDAD) U.S. GPM
37
Goulds Pumps
Ag. / Irrigation
Model 4SAE16MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET Size (Tamaño) 4 x 6 – 16 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES
16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0746R00 al impreso en la curva H-Q.
700
15
500 0
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
60% EFF. 65
2200 RPM 70 73
74
400 2000 RPM 73
17
1800 RPM 5H
300 15 P
0H
12 P
1600 RPM 5H
10 P
200 0H
P
75
HP
50
100 HP
0
0 200 400 600 800 1000 1200 1400 1600
CAPACITY (CAPACIDAD) U.S. GPM
70 80
20
75
60
1400 RPM
15 50
1200 RPM
40 40 HP
10 30 HP
25 HP
30 1000 RPM
20 HP
15 HP
20
5
10
0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400U.S. GPM
38
Performance Curves, Curvas de desempeño
Model 6SAE13MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET Size (Tamaño) 6 x 8 – 13 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES
13" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0744R00 al impreso en la curva H-Q.
550
85
350 84
2400 RPM
82
300
2200 RPM
25
250 2000 RPM 0H
P
20
0H
200 1800 RPM P
15
1600 RPM 0H
150 12 P
5H
P
10
100 75 0H
HP P
Variable
50
Speed
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200
CAPACITY (CAPACIDAD) U.S. GPM
Model 8SAE13MS Variable Speed NOTE: Not recommended for operation beyond
printed H-Q curve.
FEET Size (Tamaño) 8 x 10 – 13 (Velocidad variable) NOTA: No se recomienda para funcionamiento superior
PIES 13" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0745R00 al impreso en la curva H-Q.
350
NPSHR – FEET (PIES)
60% EFF. 30
325 20
2400 RPM 70 10
300 80 0
85
275 86
2200 RPM
TOTAL DYNAMIC HEAD (CARGA DINÁMICA TOTAL)
250
35
0H
225 P
2000 RPM
30
200 0H
P
25
175 1800 RPM 85 0H
P
150 80
1600 RPM
20
125 0H
P
100
15
0H
75 P
10
0H
50 75 P
HP
25
0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
CAPACITY (CAPACIDAD) U.S. GPM
39
Goulds Pumps
Ag. / Irrigation
7
⁄8" Impeller Bore 11⁄4" Impeller Bore 15⁄8" Impeller Bore
and 11⁄4" Seal Bore and 15⁄8" Seal Bore, and 2" Seal Bore,
Seal Code, Rotary, Stationary, Elastomers, Metal Parts, Diámetro interior, Diámetro interior, Diámetro interior,
Código del sello Rotativo Estacionario Elastómeros Partes metálicas del impulsor 7⁄8" del impulsor 11⁄4" del impulsor 15⁄8"
y diámetro interior y diámetro interior y diámetro interior
del sello 11⁄4" del sello 15⁄8" del sello 2"
0 Ceramic, Cerámica BUNA-N 10K13 10K16 10K84
1 Carbon, Carbono EPR 10K19 10K20 NA
3 10K27 10K45 10K112
316SS
5 Sil-Carb., 10K64 10K65
Viton
8A* Sil-Carb., Carburo de silicona NA NA 10K144
8B** Carburo de silicona 10K64 10K65
9† Packed Box with BUNA O-Ring, Caja prensaestopas con junta tórica de BUNA 15K17 15K3 15K4
* Prime Safe option with oiler, Opción Prime Safe con engrasador
** Prime Safe option with grease, Opción Prime Safe con grasa
† Not available for 51, 52, 53, 54, 55 (BZ, FE) sizes., No disponible para 51, 52, 53, 54, 55 (BZ, FE) tallas.
3 5
Location, Description,
6 Ubicación Descripción
1 Stationary Face, Cara estacionaria
2 Rotating Face, Cara rotativa
3 Spring – 316SS, Resorte – 316SS
Bellows (Elastomer),
4 Fuelle (Elastómero)
4 2 1 Retainer – 316SS,
MECHANICAL SEAL ASSEMBLY, INSTALACIÓN DEL SELLO MECÁNICO 5 Dispositivo de retención – 316SS
6 Cup (Elastomer), Cubeta (Elastómero)
7
23
Location, Description,
Ubicación Descripción
8
26 Grease Feeder – shown, Canal de
alimentación de grasa – aparece en
el gráfico
7 Oiler – not shown
(for 18BZ, 19BZ and 20BZ only),
Engrasador – no aparece en el gráfico
(únicamente para 18BZ, 19BZ y 20BZ)
Lip Seal – BUNA,
8 Sello con reborde – BUNA
Gland – Aluminum,
9 Casquillo – Aluminio
9
24 Mechanical Seal (seal code 8A or 8B),
– Sello mecánico (código del sello
8A o 8B)
198
AISI 1045 steel motor shaft exten- 353
sion (typical)
199 Extensión del eje del motor de
355
acero AISI 1045 (típico)
103
126
383 Packed Box Arrangement
408 370 371 Caja prensaestopas
Item No. Description Materials, Materiales
No. Ítem Descripción All Iron Bronze Fitted All Bronze 1 For separate seal housing and adapter
Todo hierro Accesorios de bronce Todo bronce construction, all bronze material only,
100 Casing, Carcasa 1001 see repair parts page.
1101
101 Impeller, Impulsor 1101 Para la construcción separada del
103 Casing wear ring, 1001 1618 1618 compartimiento del sello y el adaptador,
Anillo de desgaste de la carcasa materiales de bronce únicamente, consul-
108 Adapter, Adaptador 1001 1001 te la página de piezas de repuesto.
184 Seal housing, Cubierta del sello 1 One piece with adapter, Una pieza con adaptador 1101 NOTE:
126 Shaft sleeve, Camisa del eje Pumps will be shipped with top-vertical
178 Impeller key, Chaveta del impulsor AISI Type 300 series stainless steel discharge position as standard. For other
198 Impeller bolt, Perno del impulsor Acero inoxidable serie AISI tipo 300 orientations, remove casing bolts – rotate
199 Impeller washer, Arandela del impulsor discharge to desired position – replace
370 Hex head cap screw (adapter to case), Tornillo de and tighten bolts to 25 ft./lbs. Note that
cabeza hexagonal (del adaptador a la cubierta) Steel SAE 1200 Grade 5 discharge may extend below motor
371 Hex head cap screw (adapter to motor), Tornillo de Acero SAE 1200 grado 5 mounting surface in bottom-horizontal
cabeza hexagonal (del adaptador al motor) position; adequate clearance must be
383 Mechanical seal, Sello mecánico See seal chart on page 39, Ver tabla del sello página 39 provided.
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de 1⁄4 de pulgada ó 3⁄8 de pulgada Steel, Acero Bronze, Bronce NOTA:
513 O-ring, Anillo en O BUNA-N, BUNA-N Las bombas salen de la fábrica con la des-
Material Code, Código de material Engineering Standard, Norma de ingeniería carga orientada en posición vertical superior
1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 de manera estándar. Para modificar la orien-
1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 tación, retirar los pernos de la carcasa, hacer
1618 Bizmuth brass, Latón al bismuto girar la descarga hasta la posición deseada
Packed Box Arrangement, Caja prensaestopas y volver a colocar los pernos, ajustándolos
Item No., No. Ítem Description, Descripción Materials, Materiales a una torsión de 25 pies/libras. Se ha de
105 Lantern ring, Aro de linterna TeflonTM notar que la descarga se puede extender
106 Packing, 5 rings; Empaquetadura, 5 aros Teflon Impregnated, Impregnado de Teflon por debajo de la superficie de montaje del
107 Gland, Casquillo AISI 316SS motor en la posición horizontal inferior; por
126 Shaft sleeve, Camisa del eje AISI Type 300 Series Stainless Steel lo tanto, debe proveerse suficiente espacio.
353 Gland stud, Perno del casquillo Acero inoxidable serie AISI tipo 300
355 Gland nut, Tuerca del casquillo
AG-FLO Sizes,
Tamaños de AG-FLO
1CC7 – 1 x 2-7 2½CC5 – 2½ x 2½-5
1CC8 – 1 x 2-8 3CC5 – 3 x 3-5
1½CC6H – 1½ x 2-6 (H) 4CC5 – 4 x 4-5
1½CC8 – 1½ x 2-8 5CC6 – 5 x 5-6
2½CC7 – 2½ x 3-7 5CC7 – 5 x 6-7
2CC7 – 3 x 4-7
2CC7 – 2 x 2½-7
2CC5 – 2 x 2-5
41
Goulds Pumps
Ag. / Irrigation
108
105 106 107
ANSI 1045 steel motor
shaft extension (typical)
101
126
ANSI 1045 Extensión del eje
del motor de acero (típica)
178
198
353
199
355
126
103
383
Packed Box Arrangement
408 Caja prensaestopas
370 371
Item No. Description Materials, Materiales Material Code Engineering Standard
No. Descripción All Iron Bronze Fitted Código de material Norma de ingeniería
Ítem Todo Accesorios 1003 Cast iron ASTM A48 CL30
hierro de bronce Hierro fundido ASTM A48 CL20
100 Casing, Carcasa 1003 1618 Bismuth Bronze – Lead Free,
Bismuth Bronze – Lead Free
101 Impeller, Impulsor 1101
1001 Cast iron ASTM A48 CL20
103 Casing wear ring, Anillo de desgaste de 1618 Hierro fundido ASTM A48 CL20
1001
la carcasa 1101 ASTM B584, Modified C87500 – Lead Free
108 Adapter/seal housing, Adaptador/ 1001 ASTM B584, modified C87500 – Lead Free
Cubierta del sello Packed Box Arrangement, Caja prensaestopas
126 Shaft sleeve, Camisa del eje Item No. Description Materials
No. Ítem Descripción Materiales
178 Impeller key, Chaveta del impulsor AISI Type 300 Series SS
105 Lantern ring TeflonTM
198 Impeller bolt, Tornillo del impulsor Acero inoxidable serie
Aro de linterna
AISI tipo 300
199 Impeller washer, Arandela del impulsor 106 Packing, 5 rings Teflon Impregnated
370 Hex head cap screw (adapter to case), Tornillo Empaquetadura, 5 aros Impregnado de Teflon
de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5 107 Gland, Casquillo AISI 316SS
371 Hex head cap screw (adapter to motor), Acero SAE 1200 grado 5 126 Shaft sleeve
Tornillo de cabeza hexagonal Camisa del eje
(del adaptador al motor) 353 Gland stud AISI Type 300 Series Stainless Steel
383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello Perno del casquillo Acero inoxidable serie AISI tipo 300
355 Gland nut
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc Platted Steel Tuerca del casquillo
1
⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Steel
513 O-ring, Anillo en O BUNA-N – Standard, NOTE: NOTA:
EPR – Optional Seal housing wear ring (item El anillo de desgaste del compartimiento
Viton – Optional number 203) not shown. See repair de sello (ítem número 203) no se muestra.
parts page for detail. (Required for Consulte la página de piezas de repuesto
AG-FLO Sizes, all models except 3 x 4 – 10.) para mayor detalle. (Se requiere para todos
Tamaños de AG-FLO los modelos con excepción del 3 x 4 – 10).
1¼CC9½ – 1¼ x 1½-9½ 3CC13 – 3 x 4-13
6CC9½ – 6 x 8-9½ 4CC13 – 4 x 6-13
2½CC8 – 2½ x 3-8 AG-FLO Sizes,
3CC8 – 3 x 4-8 Tamaños de AG-FLO
4CC8 – 4 x 5-8 6CC13 – 6 x 8-13
12CC10 – 1½ x 2-10 8CC13 – 8 x 10-13
2½CC10 – 2½ x 3-10 4CC16 – 4 x 6-16
3CC10 – 3 x 4-10
2½CC10 – 2½ x 3-10
4CC10 – 4 x 6-10
2½CC13 – 2½ x 3-13
42
Power Frame Materials of Construction
Materiales de construcción del cuadro de fuerza
513 108 168 228 122 112 370C 105 106 107
134 126
100
101
178
353
198
199 355
103 333A
126
108
105 106 107
100
134 112 126
101
178
353
198
199 355
103 333A
L-Group Arrangement
126 Arreglo de grupo en L
382 Packed Box Arrangement
Caja prensaestopas
383
Item No. Description Materials, Materiales Item No. Description Materials, Materiales
No. Descripción All Iron Bronze Fitted No. Descripción All Iron Bronze Fitted
Ítem Todo Accesorios Ítem Todo Accesorios
hierro de bronce hierro de bronce
100 Casing, Carcasa 1003 122 Pump shaft, Eje de la bomba Steel, Acero
101 Impeller, Impulsor 1101 168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero
103 Casing wear ring, Anillo de desgaste de 1618 112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero
la carcasa 1001
382 Retaining ring, bearing, Anillo de retención, cojinete Steel Zinc Platted
108 Adapter/seal housing, Adaptador/ 1001 Grade 5,
370C Hex head cap screw (bearing frame to cover), Tornillo de Acero Zinc Platted
Cubierta del sello
cabeza hexagonal (de la cubierta de cojinetes al marco) grado 5
126 Shaft sleeve, Camisa del eje
333A Lip seal, Sello con reborde BUNA-N
178 Impeller key, Chaveta del impulsor AISI Type 300 Series SS
Acero inoxidable serie AISI 193 Grease fitting, Accesorio grasa Steel, Acero
198 Impeller bolt, Tornillo del impulsor tipo 300 123 V-ring deflector, Anillo en V (Deflector) BUNA-N
199 Impeller washer, Arandela del impulsor
Packed Box Arrangement, Caja prensaestopas
370 Hex head cap screw (adapter to case),Tornillo Item No. Description Materials
de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5 No. Ítem Descripción Materiales
370B Hex head cap screw (adapter to bearing frame), Acero Zinc Platted grado 5 105 Lantern ring TeflonTM
Tornillo de cabeza hexagonal
Aro de linterna
(del adaptador al motor) 106 Packing, 5 rings Teflon Impregnated
383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello Empaquetadura, 5 aros Impregnado de Teflon
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc PlattedSteel, 107 Gland, Casquillo AISI 316SS
1
⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Acero 126 Shaft sleeve
Camisa del eje
513 O-ring, Anillo en O BUNA-N – Standard, Standard
EPR – Optional, Optional 353 Gland stud AISI Type 300 Series Stainless Steel
Perno del casquillo Acero inoxidable serie AISI tipo 300
Viton – Optional, Optional
355 Gland nut
Power End Components, Componentes del extremo de fuerza Tuerca del casquillo
228 Bearing frame, Marco de cojinete Cast iron ASTM A48 CL20 Material Code Engineering Standard
134 Bearing cover, Cubierta del cojinete Hierro fundido ASTM A48 CL20 Código de material Norma de ingeniería
1001 Cast iron ASTM A48 CL20
AG-FLO Sizes, 2½FRM13 – 2½ x 3-13 Hierro fundido ASTM A48 CL20
Tamaños de AG-FLO 3FRM13 – 3 x 4-13
Sil-Brass ASTM B584, Modified C87500 –
2½FRM8 – 2½ x 3-8 4FRM13 – 4 x 6-13
1102 Lead Free
3FRM8 – 3 x 4-8 AG-FLO Sizes,
Sil-Brass ASTM B584, Modified C87500 –
4FRM8 – 4 x 5-8 Tamaños de AG-FLO
Lead Free
1½FRM10 – 1½ x 2-10 6FRM13 – 6 x 8-13
2½FRM10 – 2½ x 3-10 8FRM13 – 8 x 10-13 1003 Cast Iron ASTM A48 CL30
3FRM10 – 3 x 4-10 4FRM16 – 4 x 6-16 Cast Iron ASTM A48 CL30
2½FRM10 – 2½ x 3-10 1¼FRM9½ – 1¼ x 1½-9½ 1618 Bismuth Bronze – Lead Free
4FRM10 – 4 x 6-10 6FRM9½ – 6 x 8-9½ Bismuth Bronze – Lead Free
44
SAE Drive Materials of Construction
Materiales de construcción del mando SAE
333A
228 108
513 371C 382 193
123 105 106 107
100
165
126
101 126
Keyed Shaft Shown
(Spline Shaft Optional)
178
353
198
355
103 112
Item No. Description Materials, Materiales Item No. Description Materials, Materiales
No. Descripción All Iron Bronze Fitted No. Descripción All Iron Bronze Fitted
Ítem Todo Accesorios Ítem Todo Accesorios
hierro de bronce hierro de bronce
100 Casing, Carcasa 1003 122 Pump shaft, Eje de la bomba AISI 4140
101 Impeller, Impulsor 1101 168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero
103 Casing wear ring, Anillo de desgaste de 1618 112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero
1001
la carcasa 382 Retaining ring, bearing, Anillo de retención, cojinete Steel SAE 1200
108 Adapter/seal housing, Adaptador/ 1001 Grade 5,
370C Hex head cap screw (bearing frame to cover), Tornillo de Acero SAE 1200
Cubierta del sello cabeza hexagonal (de la cubierta de cojinetes al marco) grado 5
126 Shaft sleeve, Camisa del eje 333A Lip seal, Sello con reborde BUNA-N
AISI Type 300 Series SS
178 Impeller key, Chaveta del impulsor Acero inoxidable serie AISI 193 Grease fitting, Accesorio grasa Steel, Acero
198 Impeller nut, Tornillo del impulsor tipo 300
123 V-ring deflector, Anillo en V (Deflector) BUNA-N
370 Hex head cap screw (adapter to case),Tornillo Packed Box Arrangement, Caja prensaestopas
de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5
Item No. Description Materials
370B Hex head cap screw (adapter to bearing frame), Acero Zinc Platted grado 5
No. Ítem Descripción Materiales
Tornillo de cabeza hexagonal
105 Lantern ring TeflonTM
(del adaptador al motor)
Aro de linterna
383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello 106 Packing, 5 rings Teflon Impregnated
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc Platted Steel, Empaquetadura, 5 aros Impregnado de Teflon
1
⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Acero 107 Gland, Casquillo AISI 316SS
513 O-ring, Anillo en O BUNA-N – Standard, Standard 126 Shaft sleeve
EPR – Optional, Optional Camisa del eje
Viton – Optional, Optional 353 Gland stud AISI Type 300 Series Stainless Steel
Perno del casquillo Acero inoxidable serie AISI tipo 300
Power End Components, Componentes del extremo de fuerza
355 Gland nut
228 Bearing frame, Marco de cojinete 1003
Tuerca del casquillo
134 Bearing cover, Cubierta del cojinete 1001
Material Code Engineering Standard
340 Adapter/Engine, Adaptador/Motor 1003 Código de material Norma de ingeniería
371C Hex head cap screw (adapter to bearing frame) Steel SAE 1200 grade 5 1001 Cast iron ASTM A48 CL20
501N Cover/adapter, Cubierta/Adaptador Galvinized steel Hierro fundido ASTM A48 CL20
327C Cap screw (cover to adapter) Steel SAE 1200 grade 5 1003 Cast iron ASTM A48 CL30
AG-FLO Sizes, 2½SAE10 – 2½ x 3-10 Group 2, Grupo 2 Hierro fundido ASTM A48 CL30
Tamaños de AG-FLO 3SAE10 – 3 x 4-10 6SAE13 – 6 x 8-13 Sil-Brass ASTM B584, Modified C87500 –
Group 1, Grupo 1 2½SAE9 – 2½ x 3-9 8SAE13 – 8 x 10-13 1101 Lead Free
2½SAE8 – 2½ x 3-8 4SAE10 – 4 x 6-10 4SAE13 – 4 x 6-13 Sil-Brass ASTM B584, Modified C87500 –
3SAE8 – 3 x 4-8 2½SAE13 – 2½ x 3-13 1¼SAE9½ – 1¼ x 1½-9½ Lead Free
4SAE8 – 4 x 5-8 3SAE13 – 3 x 4-13 6SAE9½ – 6 x 8-9½ 1618 Bismuth Bronze – Lead Free,
1½SAE10 – 1½ x 2-10 4SAE13 – 4 x 6-13 Bismuth Bronze – Lead Free
45
Goulds Pumps
Ag. / Irrigation
AB DISCHARGE, CREF
Z R DESCARGA Y W
MAX.
X SUCTION,
SUCCIÓN
P.
MAX
DC DD
G D MAX.
L F F
E E H – 4 HOLES,
⁄4" NPT
1 B
A H – 4 AGUJEROS
Close Coupled Dimensions Determined by Pump, Dimensiones del Acople Cerrado Determinadas por la Bomba
Dimension “L” NOTES:
Identifier Pump Size, DC Wt. Motor Frame Size, 1. Pumps will be shipped with top
Number, Tamaño Suction, Discharge, Max., (lbs.), Tamaño del bastidor
Identifier de la DC DD R W X Y Z Peso del motor de
vertical discharge as standard.
Succión Descarga
Number Bomba Máx. (libras) dimensión “L” For other orientations, remove
140 180 casing bolts, rotate to desired
2CC5 2 x 2 – 5 2 2 315⁄16 215⁄16 15⁄8 41⁄8 5 35⁄16 26 10 105⁄8 position, replace and tighten
3 bolts to 37 lb. – ft.
2½CC5 2½ x 2½ – 5 2½ 2½ 4¾ 3¾ 33⁄8 4¼ 3½ 31 101⁄8 10¾
6
3CC5 3 x 3 – 5 3 3 55⁄16 45⁄16 23⁄16 4½ 3½ 37⁄8 37 107⁄8 11½ 2. Dimensions are in inches.
Dimensions Determined by Motor, Dimensiones Determinadas por el Motor 3. Motor dimensions may vary
Motor Frame, with motor manufacturer.
AB Max., P. Max.,
Armazón del A B CREF D E F G H 4. Not to be used for construction
AB Máx. P. Máx.
Motor
purposes.
143JM 2
6½ 5¼ 6 11¼ 3½ 2¾ 1
⁄8 ⁄32
11
65⁄8
145JM 2½ NOTAS:
182JM 2¼ 1. Las bombas se transportarán
8½ 57⁄8 6½ 15 4½ 3¾ ⁄16
3
⁄32
13
77⁄8
184JM 2¾ con la descarga vertical superior
213TCZ 10½ 73⁄8 8 18½ 5¼ 4¼ 2¾ ¼ ⁄32
13
95⁄8 como estándar. Para otras ori-
entaciones, retirar los tornillos
Horsepowers, Fuerzas de la carcasa, rotar a la posición
Motor Frame, HP @ 3500 RPM HP @ 1750 RPM Wt. deseada, reemplazar y apretar los
(lbs.), tornillos 37 libras – pies.
Armazón del 1 Phase, Monofásicos 3 Phase, Trifásicos 1 Phase, Monofásicos 3 Phase, Trifásicos Peso
Motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC (libras) 2. Las dimensiones son en pulgadas.
143JM ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½, ¾, 1 ½, ¾, 1 41
145JM 2 2 2,3 2,3 1 1 1½, 2 1½, 2 57 3. Las dimensiones del motor
182JM 3 3 5 3 3 – 3 3 77 pueden que varíen con los
184JM 5 3, 5 7½ 5, 7½ 3 – 5 5 97 fabricantes.
213TCZ – – 10 10 – – – – 133 4. No debe usarse para propósitos
de construcción.
46
Close-Coupled Dimensions and Weights
Pesos y dimensiones del acoplamiento corto
AB Z R DISCHARGE
MAX. DESCARGA Y W
C
X SUCTION
SUCCIÓN
P MAX.
D DC DD
G MAX.
L F F H – 4 HOLES
E E 4 ORIFICIOS
A ¼ NPT DRAIN B
DRENAJE NPT
Close Coupled Dimensions Determined by Pump, Dimensiones del Acople Cerrado Determinadas por la Bomba
Dimension “L” NOTES:
Identifier Pump DC Wt. Motor Frame Size, 1. Pumps will be shipped with top
Size,
Number,
Tamaño Suction*, Discharge*, Max., (lbs.), Tamaño del bastidor vertical discharge as standard.
Identifier DC DD R W X Y Z Peso del motor de
de la Succión Descarga
Number Máx. (libras) dimensión “L” For other orientations, remove
Bomba casing bolts, rotate to desired
140 180 210
4CC5 4 x 4 – 5 4 6½ 5¼ 4½ 7 4½ 110 position, replace and tighten
4¼ 4 11 ⁄8 12
3
12 ⁄8
7
5CC6 5 x 5 – 6 5 8 6¼ 5 8 5½ 125 bolts to 37 lb. – ft.
* ANSI Class 125 flanges, Bridas ANSI Clase 125 2. Dimensions are in inches.
3. Motor dimensions may vary
Dimensions Determined by Motor, Dimensiones Determinadas por el Motor with motor manufacturer.
Motor Frame,
Armazón del A
AB Max.,
B C D E F G H P. Max., 4. Not to be used for construction
AB Máx. P. Máx. purposes.
Motor
143JM 2
6½ 5¼ 6 11¼ 3½ 2¾ 1
⁄8 11
⁄32 65⁄8 NOTAS:
145JM 2½
182JM 2¼ 1. Las bombas se transportarán
8½ 57⁄8 6½ 15 4½ 3¾ 3
⁄16 13
⁄32 77⁄8 con la descarga vertical superior
184JM 2¾
213JM
como estándar. Para otras ori-
18½ 2¾ entaciones, retirar los tornillos
213TCZ 10½ 73⁄8 8 5¼ 4¼ ¼ 13
⁄32 95⁄8
215JM 20 3½
de la carcasa, rotar a la posición
deseada, reemplazar y apretar los
tornillos a 37 libras – pies.
Horsepowers, Fuerzas 2. Las dimensiones son en pulgadas.
Motor Frame, HP @ 3500 RPM HP @ 1750 RPM Wt.
(lbs.), 3. Las dimensiones del motor
Armazón del 1 Phase, Monofásicos 3 Phase, Trifásicos 1 Phase, Monofásicos 3 Phase, Trifásicos Peso
Motor pueden que varíen con los
ODP TEFC ODP TEFC ODP TEFC ODP TEFC (libras)
fabricantes.
143JM ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½,¾, 1 ½, ¾, 1 41
145JM 2 2 2,3 2,3 1 1 1½, 2 1½, 2 57 4. No debe usarse para propósitos
182JM 3 3 5 3 3 – 3 3 77 de construcción.
184JM 5 3, 5 7½ 5, 7½ 3 – 5 5 97
213JM 7½ – 7½, 10 7½ – – – – 133
213TCZ – 7½ – 7½ – – – – 133
215JM 10 7½, 10 7½, 10, 15 7½, 10, 15 – – – – 154
47
Goulds Pumps
Ag. / Irrigation
X SUCTION
SUCCIÓN
P
MAX.
D DD
DC
G MAX
L F F
E E H - 4 HOLES
⁄4" NPT
1
B 4 ORIFICIOS
A
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)
Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
Identifier Pump Suction Discharge CP DC Wt. (lbs.) Motor Frame Size, Bastidor
No.,
Pesos 140 180 210 250
Bomba Succión Descarga Max. Max. DD R W X Y Z
Ident.No. (libras)
L
1CC7MS 1 x 2 – 7 3½ 41⁄8 5½ 3 4 52 10¾ – –
1 27 11⁄16 10
1CC8MS 1 x 2 – 8 4 1⁄4 4 315⁄16 5¾ 33⁄16 4¼ 52 – –
2
1½CC6MS 1½ x 2 – 6 11⁄2 23¾ 3½ 1¼ 4½ 5 3½ 34 9¾ 10½ – –
2 ⁄8
1½CC8MS 1½ x 2 – 8 271⁄8 53⁄8 45⁄8 4¼ 5 4¼ 54 113⁄8 115⁄8
2½CC7MS 2½ x 3 – 7 3 21⁄2 255⁄8 51⁄8 4½ 113⁄16 3 4 49 101⁄8 10¾ 11¾ –
6
3CC8MS 3 x 4 – 7 4* 3* 25¼ 5¾ 5 1
⁄8 3 3
⁄4 43
⁄8
2½ 4½ 82 9¾
10 3
⁄ 8
113
⁄ 8
–
2CC7MS 2 X 2½-7 2½ 2 257⁄8 5½ 4¾ 3 4¾ 6½ 3½ 4¾ 66 111⁄8 115⁄8 12¾ –
*For use with ANSI class 150 mating flange. All others are NPT connections.
* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
48
Close-Coupled Dimensions and Weights Mechanical Seal
Pesos y dimensiones del acoplamiento corto Sello mecánico
DISCHARGE/DESCARGA NOTE: NOTA:
R 1. All pumps shipped in 1. Todas las bombas se
AB CP MAX.
Z Y W vertical discharge position. embarcan con la descarga
APPROX.
For other orientations, en posición vertical. Para
remove casing bolts, otras orientaciones, retire
X rotate to desired position, los pernos de la carcasa,
and tighten 3⁄8 - 16 casing haga rotar la descarga hasta
P bolts to 37 ft./lbs. torque., la posición deseada y ajuste
MAX. 1
⁄2 - 13 casing bolts to 90 los 16 pernos de 3/8 de
D ft./lbs. torque. pulgada a una torsión de 37
SUCTION 2. Dimensions in inches, pies/libra, y los 13 pernos de
SUCCIÓN
L F F weight in pounds. 1
/2 pulgada a 90 pies/libra.
G E E
A DRAIN PLUG B 4 H-HOLES 3. Not to be used for 2. Dimensiones en pulgadas,
APPROX. MAX. TAPÓN DE DRENAJE 4 ORIFICIOS construction purposes. peso en libras.
APROX. MÁX. 3. No utilizar con fines de
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor) construcción.
Peso y dimensiones de la bomba (la dimension “L” esta determinada por la bomba y el motor)
NPT Weight L
Identifier
Pump Suction Discharge CP DC DD R Drain W X Y Z (lbs)
No., Motor Frame, Bastidor del motor
Bomba Succión Descarga Max. Max. Drenaje Pesos
Ident.No.
NPT (libras) 140 180 210 250/280 320 360
1½CC10MS 1½ x 2 –10 2* 1½* 30¼ 6¾ 57⁄8 1¼ 5 3 5½ 93 10 7⁄8 11½ 12½ 12¾ – –
1¼ 6
2½CC8MS 2½ x 3 – 8 3* 2½* 30¾ 6¼ 5¼ 113⁄16 51⁄8 33⁄8 5 78 113⁄8 12 13 13¼ – –
2½CC9MS 2½ x 3 – 9 85
33½ 7 ⁄8 61
7½ 2¾ 5½
10 ⁄8 11¼
5
12¼ 12½ 13 135⁄8
2½CC10MS 2½ x 3 – 10 3 2½ 3½ 3
⁄8 5
2½CC13MS 2½ x 3 – 13 30¼ 87⁄8 75⁄8 9 3 7½ 139 – – 12½ 12¾ – –
3CC8MS 3 x 4 – 8 309⁄16 6¼ 53⁄8 ¼ 55⁄16 7 55⁄8 82 113⁄16 1113⁄16 1213⁄16 131⁄16 135⁄8 –
3CC10MS 3 x 4 – 10 4 3 303⁄8 7 3⁄8 6½ 3¾ 51⁄8 7½ 5½ 99 11 115⁄8 125⁄8 127⁄8 – –
3
3CC13MS 3 x 4 – 13 33¼ 9½ 81⁄8 5 9 7½ 155 – – 12½ 12¾ – –
4CC8MS 4 x 5 – 8 5 34¼ 67⁄8 5¾ 3
⁄8 5½ 8 5 99 113⁄8 12 13 13¼ 13¾ 143⁄8
4CC10MS 4 x 6 – 10 4 307⁄8 85⁄8 7½ 4½ 5½ 8½ 31⁄8 7 135 – – 131⁄8 133⁄8 – –
6
4CC13MS 4 x 6 – 13 32 9¾ 81⁄8 5¼ 9 3 7½ 171 – – 12½ 12¾ 13¼ –
1¼CC9½MS** 1¼ x 1½ – 9½ 1½* 1¼* 255⁄8 61⁄8 57⁄16 1¼ 1
⁄8 45⁄8 8 3¼ 5½ 68 10¾ 11½ 123⁄8 – – –
5CC7MS** 5 X 6-7 6 5 28 77⁄8 615⁄16 53⁄8 ¼ 513⁄16 8½ 513⁄16 6¼ 200 – 159⁄16 167⁄16 – – –
6CC9½MS 6 x 8 – 9½
6CC13MS 6 x 8 – 13 See Packed Box Dimension Page. (pumps utilize JP motors), Ver la página de dimensiones de la caja empacada. (JP motors)
8CC13MS 8 x 10 – 13
4CC16MS 4 x 6 – 16
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges. Motor Frames and Horsepower
Dimensions in inches, weights in lbs. Do not use for construction purposes. Bastidores del motor y potencia en HP
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción. Frame Size JM
T amaño del bastidor JM ODP TEFC RPM
**For JM motors through 215 see packing for larger motors., **Para JM los motores con 215 ven el embalaje para motores 143 JM 1 1
más grandes. 145 JM 11⁄2, 2 11⁄2, 2
Motor Dimensions and Weights (may vary with manufacturer)* 182 JM 3 3
Pesos y dimensiones del motor (pueden variar de acuerdo al fabricante)* 184 JM 5 5
213 JM 7 1⁄2 71⁄2
Motor Frame AB P* Weight (lbs.) 215 JM, 215 TCZ 10 10
Bastidor A (Max.) B D E F G H (Max.) Pesos (libras) 254 JM 15 15
del motor 256 JM 20 20 1750
143JM 41 284 JM 25 25
6 ⁄2
1
5 ⁄4
1
6 3 ⁄2 2 ⁄4
1 3
2 1
⁄8 5
⁄16 6 ⁄8
5
145JM 57 286 JM 30 30
182JM 2 1
⁄ 4 77 324 JM 40 40
8 ⁄2
1
5 ⁄8
7
6 ⁄2 4 ⁄2 3 ⁄4
1 1 3 3
⁄ 16 3
⁄ 8 7 7
⁄ 8
184JM 23⁄4 97 326 JM 50 50
213JM 2 3⁄4 122 143 JM 11⁄2 11⁄2
1
⁄4 1
⁄2 9 ⁄8
5
145 JM 2, 3 2
215JM 8 51⁄4 41⁄4 3 3 ⁄2
1
155
9 1⁄2 73⁄8 182 JM 5 3
213TCZ 2 ⁄4 122
3
⁄16 3
⁄8 9 ⁄8
5
184 JM 7 1⁄2 5
215TCZ 3 1⁄2 155 213 JM 10 71⁄2
254JM 4 1⁄8 265 215 JM 15 10
111⁄4 9 91⁄2 6 1⁄4 5 1
⁄4 1
⁄2 111⁄2
256JM
5 320 215 TCZ 15 –
284JM 121⁄4 12 1⁄4 103⁄4 7 51⁄2 4 1 ⁄4
3
419 254 JM 20 15 3500
1
⁄4 1
⁄2 131⁄4
286JM 5 ⁄2 422 256 JM 25 20
324JM 284 JM 30 25
8 6 1⁄4 5 ⁄4
1
562
131⁄4 131⁄4 12 5
⁄16 5⁄8 151⁄8 286 JM 40 30
326JM 6 588
364TCZ 5 ⁄ 324 JM 50 40
8 775
5
17 ⁄2 15 ⁄8 14 ⁄2 9
1 1 1
7 1 5
⁄8 18 ⁄83
326 JM 60 50
365TCZ 61⁄8 1005 364 TCZ 75 60
49 365 TCZ – 75
Goulds Pumps
Ag. / Irrigation
SUCTION
X
SUCCIÓN
P
MAX.
D DC DD
G MAX
L F F
E E H - 4 HOLES
⁄4" NPT
1
B
A 4 ORIFICIOS
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)
Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
Identifier Pump Suction Discharge CP DC Wt. (lbs.) Motor Frame Size, Bastidor
140 180 210 250
No., Bomba Succión Descarga Max. Max. DD R
W X Y Z Pesos
Ident.No.
(libras) L
1CC7PK 1 x 2 – 7 3½ 1 73⁄16 5½ 3 4 52 – –
1 30 1 ⁄16 131⁄16 1313⁄16
1CC8PK 1 x 2 – 8 4 1⁄4 4 7 5¾ 33⁄16 4¼ 52 – –
2
1½CC6PK 1½ x 2 – 6 26¾ 3½ 4½ 5 3½ 34 – –
1½ 1¼ 2 ⁄8 1213⁄16 139⁄16
1½CC8PK 1½ x 2 – 8 301⁄8 53⁄8 45⁄8 75⁄16 5 4¼ 54 147⁄16 115⁄16
2½CC7PK 2½ x 3 – 7 3 2½ 285⁄8 51⁄8 4½ 113⁄16 3 4 49 133⁄16 1313⁄16 1413⁄16 –
6
8CC7PK 3 x 4 – 7 4* 3* 28¼ 5¾ 51⁄8 3¾ 77⁄16 2½ 4½ 82 1213⁄16 137⁄16 147⁄16 –
2CC7PK 2 x 2½ – 7 2½ 2 293⁄8 5½ 4¾ 3 85⁄8 6½ 3½ 4¾ 71 14¼ 15 165⁄8 –
*For use with ANSI class 150 mating flange. All others are NPT connections.
* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
X SUCTION
SUCCIÓN
PUMP CENTERLINE
LÕNEA CENTRAL DE LA BOMBA
P MAX
K 2 HOLES DC DD
.62 DIA. G D MAX
J F F H - 4 HOLES
E E L 4 ORIFICIOS
N A B
M NPT DRAIN ADAPTER FOOT
ADAPTER FOOT DRENAJE NPT BASE ADAPTADORA
BASE ADAPTADORA
Pump Dimensions and Weights, Peso y dimensiones de la bomba
NPT Drain Wt. (lbs.) Motor Frame, Bastidor del motor
Ident. No. Pump Suction Discharge CP DC DD J K M N R Drenaje W X Y Z Pesos L
Ident. No. Bomba Succión Descarga Max. Max. NPT (libras) 140 180 210 250/280 320 360 400 440
1½CC10PK 11⁄2 x 2 –10 2* 1½* 341⁄8 63⁄4 57⁄8 – – – – 1¼ 77⁄8 3 5½ 105 – – 163⁄8 12¾ – – – –
1
⁄4 6
2½CC8PK 2 1⁄2 x 3 – 8 3* 2½* 345⁄8 61⁄4 51⁄4 – – – – 113⁄16 8 33⁄8 5 90 – – 167⁄8 13¼ – – – –
2½CC9PK 2 1⁄2 x 3 – 9
37 ⁄8 7 ⁄8
3 1
6 – – – – 7½ 2¾ 5½ 95 – – 16 ⁄8 12½ 157⁄8 16½ – –
1
2½CC10PK 21⁄2 x 3 – 10 3 2½ 31⁄2 3
⁄8 77⁄8
2½CC13PK 21⁄2 x 3 – 13 341⁄8 87⁄8 75⁄8 – – – –
9 3 7½ 155 – – 163⁄8 12¾ – – – –
3CC9PK 3 x 4 – 8 347⁄16 61⁄4 53⁄8 – – – – 1
⁄4 83⁄16 7 55⁄8 90 – – 1611⁄16 131⁄16 161⁄2 – – –
3CC10PK 3 x 4 – 10 4 3 341⁄4 7 3⁄8 61⁄2 – – – – 33⁄4 8 71⁄2 51⁄2 110 – – 161⁄2 127⁄8 – – – –
3 1
3CC13PK 3 x 4 – 13 371⁄8 91⁄2 81⁄8 – – – – 77⁄8 9 7 ⁄2 170 – – 163⁄8 123⁄4 – – – –
4CC8PK 4 x 5 – 8 5 381⁄8 67⁄8 53⁄4 – – – – 83⁄8 8 5 110 – – 167⁄8 131⁄4 165⁄8 171⁄4 – –
4CC10PK 4 x 6 – 10 343⁄4 85⁄8 71⁄2 – – – – 3
⁄8 83⁄8 81⁄2 31⁄8 7 145 – – 17 133⁄8 – – – –
4 4½
4CC13PK 4 x 6 – 13 6 357⁄8 93⁄4 81⁄8 – – – – 81⁄8 9 3 71⁄2 185 – – 163⁄8 123⁄4 161⁄8 – – –
4CC16PK ■ 4 x 6 – 16 471⁄8 123⁄4 11 115⁄16 93⁄4 8 7 85⁄8 12 4 101⁄2 390 – – 1611⁄16 173⁄16 1711⁄16 185⁄16 191⁄4 –
6CC13PK ■ 6 x 8 – 13 8 6 457⁄8 123⁄4 101⁄2 23⁄8 71⁄2 61⁄2 51⁄2 51⁄2 83⁄8 11 3 83⁄4 290 – – 163⁄4 171⁄4 173⁄4 183⁄8 187⁄8 193⁄4
8CC13PK ■ 8 x 10 – 13 10 8 481⁄8 143⁄4 13 23⁄8 71⁄2 61⁄2 51⁄2 63⁄4 85⁄8 123⁄4 4 10 520 – – 171⁄8 175⁄8 181⁄8 183⁄4 191⁄4 201⁄8
1¼CC9½PK 1¼ x 1½ – 9½ 1½* 1¼ 335⁄8 61⁄8 57⁄16 – – – – 1¼ 1
⁄8 8½ 8 3¼ 5½ 162 137⁄8 145⁄8 16¼ 16¾ – – – –
5CC7PK 5 x 6 – 7 6 5 42 77⁄8 615⁄16 – – – – 53⁄8 ¼ 911⁄16 8½ 513⁄16 6¼ 204 – – 205⁄16 2013⁄16 215⁄16 – – –
6CC9½PK 6 x 8 – 9½ 8 6 42 103⁄8 9¼ – – – – 61⁄16 ¼ 107⁄32 10½ 7 8¼ 369 – – – 22¼ 22¾ – – –
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
■ Indicates “L” Group pump (dimensions valid for packed box or mechanical seal)., ■ Indica una bomba Grupo “L” (dimensiones válidas para caja empacada o sella mecánico).
Motor Dimensions and Weights (may vary with manufacturer)*, Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
Horsepower
Motor Frame 3500 RPM 1750 RPM
A AB B D E F G H P Wt.
Bastidor
1 Phase 3 Phase 1 Phase 3 Phase
Max. Max. Max.
del motor
ODP TEFC ODP TEFC ODP TEFC ODP TEFC
145JP 6½ 5¼ 6 3½ 2¾ 2½ 1
⁄8 11
⁄32 65⁄8 – – 3 2 & 3 – – 1½ & 2 1½ & 2 57
182JP 2¼ 7 3 – 5 – – – 3 3 77
8½ 5 ⁄8
7
6½ 4½ 2¾ 3
⁄16 13
⁄32 7 ⁄8
184JP 2¾ 5 – 7½ 5 – – 5 5 88
213JP 9½ 73⁄8 8 5¼ 4¼ 2¾ ¼ 13
⁄32 95⁄8 7½ – 10 – 5 – 7½ 7½ 125
215JP 3½ 10 – 15 10 & 15 71⁄2 & 10 – 10 10 155
254JP 11¼ 9 11¾ 6¼ 5 41⁄8 111⁄2 – – 20 – – – 15 15 255
256JP 5 1
⁄4 17
⁄32 – – 25 20 – – 20 20 280
284JP 12¼ 12¼ 12¼ 7 5½ 4¾ 13¼ – – 30 25 – – 25 25 410
286JP 5½ – – 40 30 – – 30 30 425
324JP 13¼ 13¼ 131⁄2 8 61⁄4 5¼ 5
⁄16 151⁄8 – – 50 40 – – 40 40 560
326JP
6 21
⁄32 – – 60 50 – – 50 50 590
364TCZ 171⁄2 143⁄8 151⁄8 9 7 55⁄8 1 18 3
⁄ 8
– – 75 60 & 75 – – 60 60 775
365TCZ 61⁄8 – – – – – – 75 75 1005
404TCZ 191⁄2 171⁄2 165⁄8 10 8 61⁄8 1 201⁄8 – – – – – – 100 100 1110
405TCZ 67⁄8 13
⁄16 – – – – – – 125 – 1163
444TCZ 21½ 191⁄8 19½ 11 9 7¼ 1 22½ – – – – – – 150 125 1600
445TCZ 8¼ – – – – – – – 150 1708
NOTE: 1. All pumps shipped in vertical torque., ½ - 13 casing bolts to 90 ft./lbs. torque. NOTA: 1. Todas las bombas se embarcan y ajuste los 16 pernos de 3/8 de pulgada a una
discharge position. For other orientations, re- 2. Dimensions in inches, weight in pounds. con la descarga en posición vertical. Para otras torsión de 37 pies/libra, y los 13 pernos de 1/2
move casing bolts, rotate to desired position, 3. Not to be used for construction purposes. orientaciones, retire los pernos de la carcasa, pulgada a 90 pies/libra.
and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. haga rotar la descarga hasta la posición deseada 2. Dimensiones en pulgadas, peso en libras.
51 3. No utilizar con fines de construcción.
Goulds Pumps
Ag. / Irrigation
3
X
SUCTION, 1.125
SUCCIÓN DIA.
1.124
KEYWAY ¼ x 1⁄8,
DC DD CHAVETERO ¼ x 1⁄8
5¾ MAX. H – 4 HOLES, 7⁄16 DIA.
½ H – 4 AGUJEROS, 7⁄16 DIA.
2¾ 2¾ L 5 ¾
7 ¼" NPT 6½
CP
Z R DISCHARGE Y W
DESCARGA
3
X
SUCTION 1.125 DIA.
1.124
SUCCIÓN
KEYWAY
CHAVETERO
DC DD 1
⁄4 x 1⁄8
MAX 4 HOLES
51⁄4 4 ORIFICIOS
⁄2
1 7
⁄16 DIA.
23⁄4 23⁄4 L 5 3
⁄4
7 ⁄4" NPT
1 6 1⁄2
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor) NOTE:
Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor) All pumps shipped in vertical
Ident. No., Pump Suction Discharge CP DC DD L R W X Y Z Wt.(lbs.) discharge position. May
Ident. No. Bomba Succión Descarga Max. Max. Pesos (libras) be rotated in 90º increments.
1FRM7MS 1 x 2 –7 3½ 41⁄8 5½ 3 4 84 Tighten casing bolts to
1 16¾ 8 11⁄16 25 ft./lbs. torque.
1FRM8MS 1 x 2 – 8 4¼ 4 3 15⁄16 5¾ 33⁄16 4¼ 84
2 Dimensions in inches,
1½FRM6MS 1½ x 2 – 6 3½ 4½ 3½ 66
1½ 16½ 7¾ 1¼ 25⁄8 weights in lbs. Do not use for
1½FRM8MS 1½ x 2 – 8 53⁄8 45⁄8
4¼ 5 4¼ 86
2½FRM7MS 2½ x 3 – 7 3 2½ 167⁄8 51⁄8 4½ 81⁄8 113⁄16 3 4 81 construction purposes.
6
3FRM7MS 3 x 4 – 7 4* 3* 16½ 5¾ 51⁄8 7¾ 3¾ 43⁄8 2½ 4½ 114 NOTA:
*For use with ANSI class 150 mating flange. All others are NPT connections. Todas las bombas se embarcan
* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP. con la descarga en posición
vertical. Esta posición puede
rotarse en incrementos de
90°. Ajustar los pernos de la
carcasa a una torsión de 25
pies/libras.
Dimensiones en pulgadas,
peso en libras. No utilizar para
fines de construcción.
53
Goulds Pumps
Ag. / Irrigation
Power Frame Dimensions and Weights, Pesos y dimensiones del cuadro de fuerza
CP
DISCHARGE
Z R Y W
DESCARGA
37⁄8
X
PUMP SUCTION 1.125 DIA.
CENTERLINE SUCCIÓN 1.124
LÍNEA
CENTRAL
DE LA BOMBA KEYWAY
¼ x 1⁄8
2 HOLES DC DD CHAVETERO
.62 DIA. MAX ¼ x 1 ⁄8
5¾ 4 HOLES
7
⁄16 DIA.
4 ORIFICIOS
½
N 2¾ 2¾ ¼ NPT
M L 5 ¾
7 6½
ADAPTER FOOT
BASE ADAPTADORA
Frame Mounted Dimensions Determined by Pump, NOTES:
Dimensiones del Armazón Montado Determinadas por la Bomba 1. Pumps will be shipped with top
Ident. Pump Size, HL Motor Frame vertical discharge as standard. For
No. Tamaño de la Suction*, Discharge*, DC Max., Armazón del Wt. (lbs.), other orientations, remove casing
Ident. Bomba Succión Descarga CP DC Máx.
DD L R W X Y Z Motor HL Peso (libras) bolts, rotate to desired position,
No. 140-180 210 replace and tighten bolts to
4FRM5 4 x 4 – 5 4 6½ 5¼ 8¾ 4½ 7 4½ 10¼ 8¾ 142 37 lb. – ft.
177⁄8 4¼ 4
5FRM6 5 x 5 – 6 5 8 6¼ 921⁄32 5 8 5½ 115⁄32 921⁄32 157
2. Dimensions are in inches.
* ANSI Class 125 Flanges, Bridas ANSI Clase 125
Dimensions Determined by Bedplate, Dimensiones Determinadas por la Fundación 3. Motor dimensions may vary with
motor manufacturer.
Motor Frame, Wt. (lbs.), Motor Shim, Bearing Frame Shim,
HA HB HD HE HF HG HP Peso (libras) Deflector del Motor Armazón de Balineras
Armazón del Motor 4. Not to be used for construction
143T purposes.
1¾ –
145T
10 28 8 3¾ 24 2¾ ¾ 47
182T NOTAS:
¾ –
184T 1. Las bombas se transportarán con
213T/215T 12 31 8¼ 4¼ 29 3 1 65 – – la descarga vertical superior como es-
Horsepowers, Fuerzas tándar. Para otras orientaciones, retirar
Motor Frame, HP @ 3500 RPM HP @ 1750 RPM AB C P Wt. los tornillos de la carcasa, rotar a la
Armazón del 1 PH, Monofásicos 3 PH, Trifásicos 1 PH, Monofásicos 3 PH, Trifásicos Max., Max., Max., (lbs.), posición deseada, reemplazar y apretar
AB C P Peso los tornillos a 37 libras – pies.
Motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Máx. Máx. Máx. (libras)
143T ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½, ¾, 1 ½, ¾, 1 14 45 2. Las dimensiones son en pulgadas.
5¼ 65⁄8
145T 2 2 2,3 2,3 1 1 2 2 14¼ 53
182T 3 3 5 3 2 2, 3 3 3 165⁄8 7 74 3. Las dimensiones del motor pueden que
63⁄8 7 ⁄8
184T 5 3, 5 7½ 5 3 – 5 5 181⁄8 95 varíen con los fabricantes.
213T 7½ – 10 7½ 5 – 7½ 7½ 116
8½ 20 95⁄8 4. No debe usarse para propósitos de
215T 10 – 15 10, 15 – – 10 10 136
construcción.
CP 3¾ C MAX.
AB SPACER COUPLING, ACOPLAMIENTO ESPACIADOR
DISCHARGE COUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
MAX. Z R DESCARGA Y W 3
1.125 DIA.
1.124 SINGLE PHASE ONLY
X SUCTION MONOFÁSICO SOLAMENTE
SUCCIÓN P
MAX.
DC DD (4) HOLES
MAX. KEYWAY 1⁄8 x ¼
HD CHAVETERO 1⁄8 x ¼
5
⁄8 DIA.
4 ORIFICIOS
HG NPT DRAIN
HE HE DRENAJE NPT HL HF HP
HA HB
54
Power Frame Dimensions and Weights Mechanical Seal
Pesos y dimensiones del cuadro de fuerza Sello mecánico
CP
DISCHARGE
Z R DESCARGA Y W
37⁄8
X
PUMP SUCTION 1.625 DIA.
CENTERLINE SUCCIÓN 1.624
LÍNEA
CENTRAL
DE LA BOMBA KEYWAY
3
⁄16 x 3⁄8
2 HOLES DC DD CHAVETERO
.62 DIA. K MAX
3
⁄16 x 3⁄8
61⁄4 4 HOLES
9
⁄16 DIA.
4 ORIFICIOS
DRAIN PLUG 1
⁄2
TAPÓN DE J
N 3 ⁄2
1
3 ⁄2
1
DRENAJE
M L 61⁄2 1
81⁄2 81⁄2
ADAPTER FOOT ADAPTER FOOT
BASE ADAPTADORA BASE ADAPTADORA
2½CC13PK 2½ x 3 – 13 21 ⁄8 8 ⁄8 7 ⁄8 9 ⁄8 — — — —
7 7 5 3
9 3 7½ 201
3CC8PK 3 x 4 – 8
223⁄16 61⁄4 53⁄8 911⁄16 — — — — ½ 55⁄16 7 55⁄8 144
3CC10PK 3 x 4 – 10 4 3 22 73⁄8 61⁄2 91⁄2 — — — — 33⁄4 51⁄8 7½ 5½ 161
3
3CC13PK 3 x 4 – 13
217⁄8 91⁄2 81⁄8 93⁄8 — — — — 5 9
7½ 217
4CC8PK 4 x 5 – 8 5
223⁄8 67⁄8 53⁄4 97⁄8 — — — — 5½ 8 5 161
4CC10PK 4 x 6 – 10 22½ 85⁄8 7½ 10 — — — — 5½ 8½ 31⁄8 7 200
4
4½ ⁄8
3
4CC13PK 4 x 6 – 13 6 221⁄8 93⁄4 81⁄8 95⁄8 — — — — 5¼ 9 3 7½ 233
4CC16PK ■ 4 x 6 – 16 26½ 123⁄4 11 1213⁄16 29⁄16 93⁄4 8 7 85⁄8 12 4 10½ 430
6CC13PK ■ 6 x 8 – 13 8 6 251⁄4 123⁄4 10½ 135⁄8 3¾ 7½ 6½ 5½ 5½ 83⁄8 11 3 8¾ 330
8CC13PK ■ 8 x 10 – 13 10 8 26½ 143⁄4 13 14 3¾ 7½ 6½ 5½ 6¾ 85⁄8 12¾ 4 10 515
1¼CC9½PK 1¼ x 1½ – 9½ 1½* 1¼* 255⁄8 61⁄8 57⁄16 127⁄8 – – – – 1¼ 1
⁄8 8½ 8 3¼ 5½ 144
2CC7PK 2 x 2½ – 7 2½ 2 26 5½ 4¾ 13¼ – – – – 3 ¼ 85⁄8 6½ 3½ 4¾ 158
5CC7PK 5 x 6 – 7 6 5 293⁄8 77⁄8 615⁄16 165⁄8 – – – – 53⁄8 ¼ 911⁄16 8½ 513⁄16 6¼ 278
6CC9½PK 6 x 8 – 9½ 8 6 313⁄32 103⁄8 9¼ 1811⁄32 – – – – 61⁄16 ¼ 107⁄32 10½ 7 8¼ 429
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.
Dimensions in inches, weights in lbs. Do not use for construction purposes.
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.
■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE: NOTA:
1. All pumps shipped in vertical 2. Dimensions in inches, weight in 1. Todas las bombas se embarcan con 2. Dimensiones en pulgadas, peso
discharge position. For other orien- pounds. la descarga en posición vertical. Para en libras.
tations, remove casing bolts, rotate 3. Not to be used for construction otras orientaciones, retire los pernos 3. No utilizar con fines de construc-
to desired position, and tighten purposes. de la carcasa, haga rotar la descarga ción.
3
⁄8 - 16 casing bolts to 37 ft./lbs. hasta la posición deseada y ajuste los
torque., 1⁄2 - 13 casing bolts to 90 16 pernos de 3/8 de pulgada a una
ft./lbs. torque. torsión de 37 pies/libra, y los 13 per-
nos de 1/2 pulgada a 90 pies/libra.
55
Goulds Pumps
Ag. / Irrigation
3
X
SUCTION 1.125 DIA.
1.124
SUCCIÓN
KEYWAY
CHAVETERO
DC DD 1
⁄4 x 1⁄8
MAX 4 HOLES
51⁄4 4 ORIFICIOS
1
⁄2
7
⁄16 DIA.
23⁄4 23⁄4 L 5 3
⁄4
7 1
⁄4" NPT 6 1⁄2
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor) NOTE:
Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor) All pumps shipped in vertical
Ident. No. discharge position. May
Pump Suction Discharge DC Wt.(lbs.)
CP DD L R W X Y Z Pesos be rotated in 90º increments.
Ident. No. Bomba Succión Descarga Max.
(libras) Tighten casing bolts to
1FRM7PK 1 x 2 –7 31⁄2 73⁄16 51⁄2 3 4 84 25 ft./lbs. torque.
1 197⁄16 111⁄16 11⁄16
1FRM8PK 1 x 2 – 8 41⁄4 4 7 53⁄4 33⁄16 41⁄4 84
1½FRM6PK 11⁄2 x 2 – 6
2
31⁄2 41⁄2 5 31⁄2 66
Dimensions in inches,
1½FRM8PK 1 ⁄2 x 2 – 8
1 11⁄2 199⁄16
5 ⁄8
3
4 ⁄8
5 1013⁄16 11⁄4
7 ⁄16
5
5
2 ⁄8
41⁄4 86
weights in lbs. Do not use for
2½FRM7PK 21⁄2 x 3 – 7 3 21⁄2 1915⁄16 51⁄8
41⁄2 113⁄16 113⁄16 3 4 81 construction purposes.
6
3FRM7PK 3 x 4 – 7 4* 3* 199⁄16 53⁄4 51⁄8 1013⁄16 33⁄4 77⁄16 21⁄2 41⁄2 114 NOTA:
*For use with ANSI class 150 mating flange. All others are NPT connections. Todas las bombas se embarcan
* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP. con la descarga en posición
vertical. Esta posición puede
rotarse en incrementos de
90°. Ajustar los pernos de la
carcasa a una torsión de 25
pies/libras.
Dimensiones en pulgadas,
peso en libras. No utilizar para
fines de construcción.
56
Power Frame Dimensions and Weights Packed Box
Pesos y dimensiones del cuadro de fuerza Caja prensaestopas
CP
DISCHARGE
Z R DESCARGA Y W
37⁄8
X
SUCTION 1.625 DIA.
PUMP SUCCIÓN
CENTERLINE 1.624
LÕNEA
CENTRAL KEYWAY
DE LA BOMBA 3
⁄16 x 3⁄8
2 HOLES DC DD CHAVETERO
.62 DIA. K MAX 3
⁄16 x 3⁄8
61⁄4 4 HOLES
9
⁄16 DIA.
4 ORIFICIOS
DRAIN PLUG ADAPTER 1
⁄2
TAPÓN DE FOOT, BASE J
N 3 ⁄2
1
3 ⁄2
1
ADAPTADORA
DRENAJE L 61⁄2 1
M
8 ⁄2 1
81⁄2
ADAPTER FOOT
BASE ADAPTADORA
NOTE: NOTA:
1. All pumps shipped in vertical 1. Todas las bombas se embarcan con la
discharge position. For other orien- descarga en posición vertical. Para otras
tations, remove casing bolts, rotate orientaciones, retire los pernos de la
to desired position, and tighten carcasa, haga rotar la descarga hasta la
3
⁄8 - 16 casing bolts to 37 ft./lbs. posición deseada y ajuste los 16 pernos
torque., 1⁄2 - 13 casing bolts to 90 de 3/8 de pulgada a una torsión de 37
ft./lbs. torque. pies/libra, y los 13 pernos de 1/2 pulgada
2. Dimensions in inches, weight in a 90 pies/libra.
pounds. 2. Dimensiones en pulgadas, peso en
3. Not to be used for construction libras.
purposes. 3. No utilizar con fines de construcción.
57
Goulds Pumps
Ag. / Irrigation
P MAX
DC DD 4 HOLES
MAX 5
⁄8 DIA.
KEYWAY
HD CHAVETERO 4 ORIFICIOS
1
⁄8 x ¼
HG
¼" NPT
HE HE HL HF HP
(Motor End Only)
HA HB
(Extremo del motor
Pump Dimensions and Weights (Dimension “HL” determined by Pump and Motor) únicamente)
Peso y dimensiones de la bomba (la dimensión “HL” está determinada por la bomba y el motor)
Wt.(lbs.) Motor Frame Size, Tamaño del bastidor
Ident. No. Pump Suction Discharge CP DC DD R W X Y Z
Pesos 140 / 180 210 250 / 280
Ident. No. Bomba Succión Descarga Max. Max.
(libras) HL
1FRM7MS 1 x 2 – 7 1 163⁄8 3½ 41⁄8 5½ 3 4 84 – –
1 ⁄16
1
1FRM8MS 1 x 2 – 8 4¼ 4 315⁄16 5¾ 33⁄16 4¼ 84 –
2 9¼
1½FRM6MS 11⁄2 x 2 – 6 11⁄2 16½ 3½ 4½ 5 3½ 66 7¾ –
1¼ 2 ⁄8
1½FRM8MS 1 ⁄2 x 2 – 8
1
5 ⁄8
3
4 ⁄4
1
5 4¼ 86
–
2½FRM7MS 21⁄2 x 3 – 7 3 21⁄2 167⁄8 51⁄8 4½ 113⁄16 3 4 81 95⁄8 81⁄8 43⁄8
6
3FRM7MS 3 x 4 – 7 4* 3* 16½ 53⁄4 51⁄8 3¾ 43⁄8 2½ 4½ 114 9¼ 7¾ 7
*For use with ANSI class 150 mating flange. All others are NPT connections. , * Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
58
Bedplate Assembly Mechanical Seal
Instalación de la placa de asiento Sello mecánico
Channel Steel Bedplate. Clockwise rotation viewed from drive end.
Placa de asiento de acero acanalado. Rotación dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
CP 3¾ C MAX.
SPACER COUPLING, ACOPLAMIENTO ESPACIADOR
DISCHARGE COUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
AB MAX. Z R Y W 3 ⁄8
7
DESCARGA
1.625
1.624 DIA. SINGLE PHASE ONLY
MONOFÁSICO SOLAMENTE
X SUCTION
SUCCIÓN P
MAX.
(4) HOLES
DC MAX. DD
*
5
⁄8 DIA.
HD KEYWAY 3⁄16 x 3⁄8 4 ORIFICIOS
CHAVETERO 3⁄16 x 3⁄8
HG
NPT DRAIN
HE HE DRENAJE NPT L HF 1¾
HA HB
* Dimension will include any special shims required to match pump centerline to motor. NOTE: 1. All pumps shipped in
* La dimensión incluye cualquier cuña especial que se requiera para hacer coincidir la línea central vertical discharge position. For
de la bomba con el motor. other orientations, remove casing
Pump Dimensions and Weights, Peso y dimensiones de la bomba bolts, rotate to desired position,
NPT
and tighten 3⁄8 - 16 casing bolts to
Weight
Ident No. Pump Suction Discharge CP DC DD L R Drain W X Y 37 ft./lbs. torque., ½ - 13 casing
Z (lbs)
Ident. No. Bomba Succión Descarga Max. Max. Drenaje bolts to 90 ft./lbs. torque.
Pesos
NPT 2. Dimensions in inches, weight
(libras)
1½FRM10MS 1½ x 2 –10 2* 1½* 217⁄8 6¾ 57⁄8 93⁄8 1¼ 5 3 5½
in pounds.
155
2½FRM8MS 2½ x 3 – 8 3* 2½* 223⁄8 6¼ 5¼ 97⁄8 113⁄16
1¼
51⁄8
6
33⁄8 5
3. Not to be used for construction
140
purposes.
2½FRM9MS 2½ x 3 – 9
21 ⁄8 7 ⁄8 6 9 ⁄8
5 1 1
7½ 2¾ 5½ NOTA: 1. Todas las bombas
147
2½FRM10MS 2½ x 3 – 10 3 2½ 3½ 3
⁄8 5
se embarcan con la descarga
2½FRM13MS 2½ x 3 – 13 21 ⁄8 8 ⁄8 7 ⁄8 9 ⁄8
7 7 5 3
9 3 7½ 201
en posición vertical. Para otras
3FRM8MS 3 x 4 – 8 223⁄16 6¼ 53⁄8 97⁄16 ¼ 55⁄16 7 55⁄8 144
orientaciones, retire los pernos de
3FRM10MS 3 x 4 – 10 4 3 22 7 3⁄8 6½ 9½ 3¾ 51⁄8 7½ 5½ 161
3 la carcasa, haga rotar la descarga
3FRM13MS 3 x 4 – 13 217⁄8 9½ 81⁄8 93⁄8 5 9 7½ 217
hasta la posición deseada y ajuste
4FRM8MS 4 x 5 – 8 5 223⁄8 67⁄8 5¾ 97⁄8 3
⁄8 5½ 8 5 161
los 16 pernos de 3⁄8 de pulgada
4FRM10MS 4 x 6 – 10 4 22½ 85⁄8 7½ 10 4½ 5½ 8½ 31⁄8 7 200
a una torsión de 37 pies/libra, y
6
4FRM13MS 4 x 6 – 13 221⁄8 9¾ 81⁄8 95⁄8 5¼ 9 3 7½ 233
los 13 pernos de ½ pulgada a 90
1¼FRM9½MS 1¼ x 1½ – 9½ 1½* 1¼* 255⁄8 61⁄8 57⁄16 127⁄8 1¼ 1
⁄8 8½ 8 3¼ 5½ 144
pies/libra.
2FRM7MS 2 x 2½ – 7 2½ 2 26 5½ 4¾ 13¼ 3 ¼ 85⁄8 6½ 3½ 4¾ 158
5FRM7MS 5 x 6 – 7 6 5 293⁄8 77⁄8 615⁄16 165⁄8 53⁄8 ¼ 911⁄16 8½ 513⁄16 6¼ 2. Dimensiones en pulgadas, peso
278
6FRM9½MS 6 x 8 – 9½ 8 6 313⁄32 103⁄8 9¼ 1811⁄32 61⁄16 ¼ 107⁄32 10½ 7 8¼ en libras.
429
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.
3. No utilizar con fines de
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
construcción.
Motor and Bedplate Dim. and Weights (may vary with manufacturer.) Peso y dim. del motor y la placa de asiento (pueden variar de acuerdo al fabricante)
Motor HP @ 3500 RPM HP @ 1750 RPM - T- Wt. Bedplate Data, Datos de la placa de asiento
Frame Frame Only, Bastidor Weight Motor Bearing Frame
T únicamente AB C P (lbs.)
Bastidor HA HB HD HE HF HG (lbs) Shim Shim, Cuña del
Single phase, Monofásico Three phase, Trifásico Max. Max. Max. Pesos
del Pesos Cuña del bastidor de
(libras) (libras)
motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC motor cojinetes
143T – – – – – – – – 5¼ 13 ⁄8 5¼ 45 2¾
3
145T – – – – – – 1 1 14¼ 53
–
182T – – 5 – 1,1½ 1,1½ 1,1½ 1,1½ 57⁄8 165⁄8 57⁄8 74
1¾
184T – – – – — —
5 5 57⁄8 18 8 95
13 42 10¼ 5¼ 38½ 4 111
213T – – – – — —
7½ 7½ 73 ⁄8 18 116
95⁄8 1 –
215T – – – – 15 — 10 10 191⁄8 136
254T – – – – 20 15 15 15 101⁄8 213⁄8
5
266
13 – –
256T – – – – 25 20 20 20 23 ⁄8 264
284TS/T – – – – 30 25 25 25 12 5⁄8 247⁄8 392
15 15 44 101⁄2 53⁄4 401⁄2 31⁄2 124 – ¾
286TS/T – – – – 40 30 30 30 265⁄8 422
324TS/T – – – – 50 40 40 40 141⁄8 28¾ 173⁄8 592 12
– 1¾
326TS/T – – – – 60 50 50 50 30¼ 634 71⁄4 441⁄2 4
18 48 183
364TS/T – – – – 75 60 60 60 31 5
⁄8 834
151⁄8 187⁄8 13 – 2¾
356TS/T – – – – 100 75 75 75 325⁄8 1000
59
Goulds Pumps
Ag. / Irrigation
P MAX
DC DD 4 HOLES
MAX 5
⁄8 DIA.
KEYWAY
HD CHAVETERO 4 ORIFICIOS
1
⁄8 x 1⁄4
HG
1
⁄4" NPT
HE HE HL HF HP
(Motor End Only)
HA HB (Extremo del motor
únicamente)
Pump Dimensions and Weights (Dimension “HL” determined by Pump and Motor)
Peso y dimensiones de la bomba (la dimensión “HL” está determinada por la bomba y el motor)
Wt.(lbs.) Motor Frame Size, Tamaño del bastidor
Ident. No. Pump Suction Discharge CP DC DD R W X Y Z
Pesos 140 / 180 210 250 / 280
Ident. No. Bomba Succión Descarga Max. Max.
(libras) HL
1FRM7PK 1 x 2 – 7 3½ 73⁄16 5½ 3 4 84 – –
1 197⁄16 11⁄16
1FRM8PK 1 x 2 – 8 4¼ 4 7 5¾ 33⁄16 4¼ 84 –
2 125⁄16
1½FRM6PK 1½ x 2 – 6 1½ 199⁄16 3½ 4½ 5 3½ 66 1013⁄16 –
1¼ 2 ⁄8
1½FRM8PK 1½ x 2 – 8 53⁄8 75⁄16 5 4¼ 86
–
2½FRM7PK 2½ x 3 – 7 3 2½ 1915⁄16 51⁄8 4½ 113⁄16 3 4 81 1211⁄16 113⁄16 77⁄16
6
3FRM7PK 3 x 4 – 7 4* 3* 199⁄16 5¾ 51⁄8 3¾ 77⁄16 21⁄2 4½ 114 125⁄16 1013⁄16 101⁄16
*For use with ANSI class 150 mating flange. All others are NPT connections., * Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
Motor Dimensions and Weights, Peso y dimensiones del motor
Motor Frame 3500 RPM 1750 RPM Wt. (lbs.)
Bastidor 1 Phase 3 Phase 1 Phase 3 Phase AB C P Pesos
del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max. (libras)
143 T 1⁄2,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 1⁄2,3⁄4 1⁄2,3⁄4 1⁄2,3⁄4,1 1⁄2,3⁄4,1 133⁄8 45
51⁄4 51⁄4
145 T 2 2 2,3 2,3 1,1 ⁄2 1,1 ⁄2 1 ⁄2,2 1 ⁄2,2
1 1 1 1
141⁄4 53
182 T 3 3 5 3 2 2,3 3 3 16 ⁄8
5
74
57⁄8 57⁄8
184 T 5 3,5 71⁄2 5 3 – 5 5 181⁄8 95
213 T 7 ⁄2
1
– 10 7 ⁄2
1
5 – 7 ⁄2
1
7 ⁄2
1
18 116
73⁄8 73⁄8
215 T 10 – 15 10,15 – – – – 191⁄8 136
254 T – – 20 – – – – – 1 21 ⁄8 1
5
266
10 ⁄8 10 ⁄8
256 T – – 25 20,25 – – – – 233⁄8 264
284 TS/T – – 30 25 – – – – 12 ⁄8
5
24 ⁄8
7
15 392
60
Engineering Data – Bedplate Assembly Packed Box
Datos de ingeniería – Instalación de la placa de asiento Caja prensaestopas
Channel Steel Bedplate. Clockwise rotation viewed from drive end.
Placa de asiento de acero acanalado. Rotación dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
CP 33⁄4 C MAX.
SPACER COUPLING, ACOPLAMIENTO ESPACIADOR
DISCHARGE COUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
AB MAX. Z R Y W 37⁄8
DESCARGA
1.625
1.624 DIA. SINGLE PHASE ONLY
MONOFÁSICO SOLAMENTE
X SUCTION
SUCCIÓN
P
MAX. (4) HOLES
DC DD
* MAX.
5
⁄8 DIA.
HD KEYWAY 3⁄16 x 3⁄8 4 ORIFICIOS
CHAVETERO 3⁄16 x 3⁄8
HG
NPT DRAIN
HE HE DRENAJE NPT L HF 13⁄4
HA HB
* Dimension will include any special shims required to match pump centerline to motor. NOTE: 1. All pumps shipped
in vertical discharge position.
* La dimensión incluye cualquier cuña especial que se requiera para hacer coincidir la línea central de la bomba con el motor. For other orientations, remove
Pump Dimensions and Weights, Peso y dimensiones de la bomba casing bolts, rotate to desired
NPT Weight position, and tighten 3⁄8 - 16
Ident. No. Pump Suction Discharge CP DC DD L R Drain W X Y Z (lbs) casing bolts to 37 ft./lbs.
Ident. No. Bomba Succión Descarga Max. Max. Drenaje Pesos torque., 1⁄2 - 13 casing bolts to
NPT (libras) 90 ft./lbs. torque.
1½FRM10MS 1½ x 2 –10 2* 1½* 24¾ 63⁄4 57⁄8 12¼ 1¼ 77⁄8 3 51⁄2 165 2. Dimensions in inches,
¼ 6 weight in pounds.
2½FRM8MS 2½ x 3 – 8 3* 2½* 25¼ 6¼ 5¼ 12¾ 113⁄16 8 33⁄8 5 150
3. Not to be used for con-
2½FRM9MS 2½ x 3 – 9 struction purposes.
24½ 7 ⁄8 6 12
1
7½ 2¾ 5½ 160
2½FRM10MS 2½ x 3 – 10 3 2½ 31⁄2 3
⁄8 77⁄8
NOTA: 1. Todas las bombas
2½FRM13MS 2½ x 3 – 13 24¾ 8 ⁄8 7 ⁄8 12¼
7 5
9 3 7 ⁄2
1
215 se embarcan con la descarga
3FRM8MS 3 x 4 – 8 221⁄16 6¼ 53⁄8 125⁄16 ¼ 83⁄16 7 55⁄8 155 en posición vertical. Para otras
3FRM10MS 3 x 4 – 10 4 3 247⁄8 7 3⁄8 6½ 123⁄8 3¾ 8 71⁄2 51⁄2 170 orientaciones, retire los pernos
3
3FRM13MS 3 x 4 – 13 24¾ 9½ 81⁄8 12¼ 77⁄8 9 71⁄2 230 de la carcasa, haga rotar la
4FRM8MS 4 x 5 – 8 5 25¼ 67⁄8 53⁄4 12¾ 3
⁄8 83⁄8 8 5 170 descarga has–ta la posición de-
4FRM10MS 4 x 6 – 10 4 253⁄8 85⁄8 7½ 127⁄8 41⁄2 81⁄2 31⁄8 7 210 seada y ajuste los 16 pernos de
6 3
⁄8 de pulgada a una torsión de
4FRM13MS 4 x 6 – 13 25 9¾ 81⁄8 12½ 81⁄8 9 3 71⁄2 245
1¼FRM9½MS 1¼ x 1½ – 9½ 1½* 1¼* 255⁄8 61⁄8 57⁄16 127⁄8 1¼ 1
⁄8 8½ 8 3¼ 5½ 144 37 pies/libra, y los 13 pernos
2FRM7MS 2 x 2½ – 7 2½ 2 26 5½ 4¾ 13¼ 3 ¼ 85⁄8 6½ 3½ 4¾ 158 de 1/2 pulgada a 90 pies/libra.
5FRM7MS 5 x 6 – 7 6 5 293⁄8 77⁄8 615⁄16 165⁄8 53⁄8 ¼ 911⁄16 8½ 513⁄16 6¼ 278 2. Dimensiones en pulgadas,
6FRM9½MS 6 x 8 – 9½ 8 6 313⁄32 103⁄8 9¼ 1811⁄32 61⁄16 ¼ 107⁄32 10½ 7 8¼ 429 peso en libras.
3. No utilizar con fines de
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges. construcción
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Motor and Bedplate Dim. and Weights (may vary with manufacturer.) Peso y dim. del motor y la placa de asiento (pueden variar de acuerdo al fabricante)
Motor HP @ 3500 RPM HP @ 1750 RPM - T- Wt. Bedplate Data, Datos de la placa de asiento
Frame Frame Only, Bastidor AB Weight Motor
Bearing Frame
C P (lbs.)
Bastidor T únicamente (lbs) Shim
Shim, Cuña del
del Single phase, Monofásico Three phase, Trifásico Max. Max. Max. Pesos HA HB HD HE HF HG
Pesos Cuña del
bastidor de
(libras) (libras)
motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC motorcojinetes
143T – – – – – – – – 5¼ 133⁄8 5¼ 45 2¾
145T – – – – – – 1 1 14¼ 53 –
182T – – 5 – 1,1½ 1,1½ 1,1½ 1,1½ 57⁄8 165⁄8 57⁄8 74
1¾
184T – – – – — —
5 5 57⁄8 18 8 95
13 42 10¼ 5¼ 38½ 4 111
213T – – – – — —
7½ 7½ 73 ⁄8 18 116
9 5
⁄8 1 –
215T – – – – 15 — 10 10 191⁄8 136
254T – – – – 20 15 15 15 21 ⁄8
5
266
10 ⁄8
1
13 – –
256T – – – – 25 20 20 20 233⁄8 264
284TS/T – – – – 30 25 25 25 12 5⁄8 247⁄8 392
15 15 44 101⁄2 53⁄4 401⁄2 31⁄2 124 – ¾
286TS/T – – – – 40 30 30 30 265⁄8 422
324TS/T – – – – 50 40 40 40 28¾ 173⁄8 592 12
14 ⁄8
1
– 1¾
326TS/T – – – – 60 50 50 50 30¼ 634 71⁄4 441⁄2 4
18 48 183
364TS/T – – – – 75 60 60 60 315⁄8 834
151⁄8 187⁄8 13 – 2¾
356TS/T – – – – 100 75 75 75 325⁄8 1000
61
Goulds Pumps
Ag. / Irrigation
CP
Z R DISCHARGE Y W V1 V2
DESCARGA
X
SUCTION 1.625 DIA.
SUCCIÓN 1.624
KEYWAY
3
⁄16 x 3⁄8
DD CHAVETERO
3
⁄16 x 3⁄8
K DC
MAX.
SAE #1 – 5
N N NPT DRAIN
2 HOLES DRENAJE NPT J SAE drive number is determined by
.56 DIA. M
the engine flywheel housing size.
2 ORIFICIOS
El número del mando SAE se determina
por el tamaño de la caja del volante
Dimensions and Weights del motor.
Pesos y dimensiones
Ident. No. Pump Suction Discharge DC NPT Drain Weight (lbs.)
Ident. No. Bomba Succión Descarga CP (Max.) DD J K M N R Drenaje W X Y Z Pesos
NPT (libras)
1½SAE10PK 1½ x 2 –10 2* 1½* 257⁄16 6¾ 57⁄8 — — — — 1¼ 77⁄8 6 3 5½ 235
¼
2½SAE8PK 2½ x 3 – 8 3* 2½* 2515⁄16 6¼ 5¼ — — — — 113⁄8
8
33⁄8 5 220
2½SAE9PK 2½ x 3 – 9
25 ⁄16 7 ⁄8
3 1
6 — — — —
7½ 2¾ 5½ 230
2½SAE10PK 2½ x 3 – 10 3 2½
3½ 3
⁄8 77⁄8
2½SAE13PK 2½ x 3 – 13 25 ⁄16 8 ⁄8
5 7
7 ⁄8 — — — —
5
9 3 7½ 285
3SAE8PK 3 x 4 – 8
22¾ 61⁄4 53⁄8 — — — —
¼ 83⁄16 7 55⁄8 225
3SAE10PK 3 x 4 – 10 4 3 259⁄16 73⁄8 6½ — — — — 3¾ 8 7½ 5½ 240
3
3SAE13PK 3 x 4 – 13
257⁄16 91⁄2 81⁄8 — — — —
77⁄8 9
7½ 300
4SAE8PK 4 x 5 – 8 5
2513⁄16 67⁄8 5¾ — — — —
83⁄8 8 5 240
4SAE10PK 4 x 6 – 10 271⁄16 85⁄8 7½ — — — — 83⁄8 8½ 31⁄8 7 280
4 4½ ⁄
3
8
4SAE13PK 4 x 6 – 13 6 2511⁄16 93⁄4 81⁄8 — — — —
81⁄8 9 3 7½ 315
4SAE16PK ■ 4 X 6 – 16 273⁄16 12¾ 11 115⁄16 9¾ 16 7 85⁄8 12 4 10½ 500
6SAE13PK ■ 6 X 8 – 13 8 6 2515⁄16 12¾ 10½ 23⁄8 7½ 13 5½ 5½ 83⁄8 11 3 8¾ 400
8SAE13PK ■ 8 x 10 – 13 10 8 27 ⁄16 14¾
3
13 2 ⁄8 7½ 13 5½ 6¾
3
85⁄8 12¾ 4 10 585
1¼SAE9½PK 1¼ x 1½ – 9½ 1½* 1¼* 265⁄16 61⁄8 57⁄16 – – – – 1¼ 1
⁄8 8½ 8 3¼ 5½ 267
6SAE9½PK 6 x 8 – 9½ 8 6 3125⁄32 103⁄8 9¼ – – – – 61⁄16 ¼ 107⁄32 10½ 7 8¼ 499
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges. SAE # V1 V2
Dimensions in inches, weights in lbs. Do not use for construction purposes.
1, 3, 5 13¼ 1½
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción. 2, 4 13 1¾
■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE: NOTA:
1. All pumps shipped in horizontal dis- 1. Todas las bombas se embarcan con la
charge position. For other orientations, descarga en posición horizontal. Para otras
remove casing bolts, rotate to desired orientaciones, retire los pernos de la carcasa,
position, and tighten 3⁄8 - 16 casing haga rotar la descarga hasta la posición de-
bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing seada y ajuste los 16 pernos de 3/8 de pulgada
bolts to 90 ft./lbs. torque. a una torsión de 37 pies/libra, y los 13 pernos
2. Dimensions in inches, weight in de 1/2 pulgada a 90 pies/libra.
pounds. 2. Dimensiones en pulgadas, peso en libras.
3. Not to be used for construction 3. No utilizar con fines de construcción.
purposes.
63
Goulds Pumps
Ag. / Irrigation
CP
Z R DISCHARGE Y W V1 V2
DESCARGA
X
1.625 DIA.
SUCTION 1.624
SUCCIÓN
KEYWAY
3
⁄16 x 3⁄8
DD CHAVETERO
3
⁄16 x 3⁄8
K DC
MAX.
SAE #1 – 5
N N NPT DRAIN
2 HOLES DRENAJE NPT J SAE drive number is determined by
.56 DIA. M
the engine flywheel housing size.
2 ORIFICIOS
El número del mando SAE se determina
por el tamaño de la caja del volante
Dimensions and Weights del motor.
Pesos y dimensiones
Ident. No. Pump Suction Discharge DC NPT Drain Weight (lbs.)
Ident. No. Bomba Succión Descarga CP (Max.) DD J K M N R Drenaje W X Y Z Pesos
NPT (libras)
1½SAE10MS 1½ x 2 –10 2* 1½* 229⁄16 63⁄4 57⁄8 — — — — 1¼ 5 6 3 5½ 235
¼
2½SAE8MS 2½ x 3 – 8 3* 2½* 23 ⁄16 6 ⁄4
1 1
51⁄4 — — — — 113⁄16
51⁄8
33⁄8 5 220
2½SAE9MS 2½ x 3 – 9 7½ 2¾ 5½ 230
225⁄16 71⁄8 6 — — — —
2½SAE10MS 2½ x 3 – 10 3 2½
3½ 3
⁄8 5
2½SAE13MS 2½ x 3 – 13 227⁄16 87⁄8 75⁄8 — — — — 9 3 7½ 285
3SAE8MS 3 x 4 – 8
19 ⁄8 6 ⁄4
7 1
53⁄8 — — — —
¼ 55⁄16 7 55⁄8 225
3SAE10MS 3 x 4 – 10 4 3 2211⁄16 73⁄8 6½ — — — — 3¾ 51⁄8 7½ 5½ 240
3
3SAE13MS 3 x 4 – 13
229⁄16 9½ 81⁄8 — — — —
5 9
7½ 300
4SAE8MS 4 x 5 – 8 5
2215⁄16 67⁄8 5¾ — — — —
5½ 8 5 240
4SAE10MS 4 x 6 – 10 4 245⁄16 85⁄8 7½ — — — — 4½ 3
⁄8 5½ 8½ 31⁄8 7 280
4SAE13MS 4 x 6 – 13 6 2213⁄16 9¾ 81⁄8 — — — —
5¼ 9 3 7½ 315
4SAE16MS ■ 4 x 6 – 16 273⁄16 12¾ 11 17⁄8 93⁄4 16 7 85⁄8 12 4 10½ 500
5SAE13MS ■ 6 x 8 – 13 8 6 2515⁄16 12¾ 10½ 23⁄8 7½ 13 5½ 5½ 83⁄8 11 3 8¾ 400
8SAE13MS ■ 8 x 10 – 13 10 8 273⁄16 14¾ 13 23⁄8 7½ 13 5½ 63⁄4 85⁄8 12¾ 4 10 585
1¼SAE9½MS 1¼ x 1½ – 9½ 1½* 1¼* 265⁄16 61⁄8 57⁄16 – – – – 1¼ 1
⁄8 8½ 8 3¼ 5½ 265
6SAE9½MS 6 x 8 – 9½ 8 6 31 ⁄32 10 ⁄8 9¼ –
25 3
– – – 6 ⁄16
1
¼ 107⁄32 10½ 7 8¼ 497
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges. SAE # V1 V2
Dimensions in inches, weights in lbs. Do not use for construction purposes.
1, 3, 5 13¼ 1½
* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción. 2, 4 13 1¾
■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE: NOTA:
1. All pumps shipped in horizontal dis- 1. Todas las bombas se embarcan con la descar-
charge position. For other orientations, ga en posición horizontal. Para otras orientacio-
remove casing bolts, rotate to desired nes, retire los pernos de la carcasa, haga rotar la
position, and tighten 3⁄8 - 16 casing bolts descarga hasta la posición deseada y ajuste los
to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts 16 pernos de 3/8 de pulgada a una torsión de 37
to 90 ft./lbs. torque. pies/libra, y los 13 pernos de 1/2 pulgada a 90
2. Dimensions in inches, weight in pies/libra.
pounds. 2. Dimensiones en pulgadas, peso en libras.
3. Not to be used for construction 3. No utilizar con fines de construcción.
purposes.
64
Notes, Notas
65
Goulds Pumps
Ag. / Irrigation
Notes, Notas
66
Notes, Notas
67
Specifications Especificaciones Typical Applications Aplicaciones típicas
Capacities to: Capacidad hasta: • Booster service • Servicio de refuerzo
1600 GPM (363 m3/hr) at 1600 GPM (363 m 3/hr) a 3500 RPM
3500 RPM 4500 GPM (1020 m 3/hr) a 1750 RPM
• Spraying systems • Sistemas de rociado
4500 GPM (1020 m3/hr) at
Cargas hasta:
1750 RPM
490 pies (150 m) carga dinámica total
• Irrigation • Sistemas de riego
Heads to: a 3500 RPM
490 feet TDH (150 m) at 300 pies (90 m) carga dinámica total a
3500 RPM 1750 RPM • Water circulation • Circulación de agua
300 feet TDH (90 m) at
Presión de operación hasta:
1750 RPM • Liquid transfer • Transferencia de líquidos
75 PSIG (12 bars)
Working pressure to:
175 PSIG (12 bars) Presión de succión hasta:
100 PSIG (7 bars) • General purpose pumping • Aplicaciones de bombeo
Suction pressure to: en general
100 PSIG (7 bars) Temperatura máxima:
212 °F (100 °C) con sello estándar o
Maximum temperature to: 250 °F (121 °C) con sello optativo.
212°F (100°C) with standard seal or
250°F (121°C) with optional seal. Motor:
NEMA JM estándar en el modelo
Motor: 3656 y bastidor NEMA T estándar en
NEMA standard JM frame or el modelo 3756 con sello mecánico,
T-frame for mechanical seal, JP or bastidor JP o T para caja prensaestopas.
T-frame for packed box. Open drip Las cubiertas disponibles son: abierta a
proof, totally enclosed fan cooled and prueba de filtración, totalmente
explosion proof enclosures available. encerrada con enfriamiento por
Single phase (115/230 V), ½-3 HP, ventilador y a prueba de explosiones.
(230 V) 5-7½ HP, and three phase Motores monofásicos (115/230 V),
(208 – 230/460 V) 2 – 150 HP are ½-3 HP (230 V) 5-7½ HP,
available at 1750 or 3500 RPM. y trifásicos (208 – 230/460 V)
Direction of Rotation: 2 – 150 HP disponibles a
Clockwise viewed from motor end. 1750 ó 3500RPM.
Dirección de rotación:
Dextrorsa (sentido de las agujas del
reloj) cuando se mira desde el extremo
del motor.
ITT
2881 East Bayard Street, Seneca Falls, NY 13148
IT T
Phone: (315) 568-7123 • Fax: (315) 568-7973
www.goulds.com
Goulds Pumps is a registered trademark of ITT Corporation. ITT, the Engineered Blocks Symbol
and Engineered for Life are registered trademarks of ITT Manufacturing Enterprises, Inc. Engineered for life
Copyright © 2009 ITT Corporation BAGFLO June, 2009 Printed in U.S.A.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
68