Documentos de Académico
Documentos de Profesional
Documentos de Cultura
M315C Excavator W5M00001-UP (MACHINE) POWERED by C4.4 Engine (SEBP4893 - 41) - Sistemas y Componentes
M315C Excavator W5M00001-UP (MACHINE) POWERED by C4.4 Engine (SEBP4893 - 41) - Sistemas y Componentes
Pantalla anterior
Bienvenido: nodiers
Producto: EXCAVADORA DE RUEDAS
Modelo: M315D EXCAVADORA DE RUEDAS W5M00350
Configuración: Excavadora M315D W5M00001-UP (MÁQUINA) ALIMENTADA
POR EL MOTOR C4.4
Pruebas y
ajustes Excavadoras de ruedas M313D, M315D, M316D, M318D y M322D y manipuladores de
materiales con ruedas M318D MH y M322D Sistema hidráulico
Número de medio -RENR9465-14 Fecha de publicación -01/08/2015 Fecha de actualización -04/08/2015
i04393083
Introducción
Realice el siguiente procedimiento para limitar la velocidad de desplazamiento de la máquina.
Herramientas requeridas
tabla 1
Herramientas requeridas
Preparación de la máquina
1. Elimine a todo el personal de la máquina y del área alrededor de la máquina.
2. Encender el motor.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 1/6
20/4/2019 M315D Excavator W5M00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP4893 - 41) - Sistemas y componentes
Ilustración 1 g02449876
Marcación rápida del motor
5. Coloque la máquina en una superficie nivelada. Verifique la visibilidad y ajuste los espejos para obtener la
mejor visión cerca de la máquina.
6. Presione completamente el pedal del freno de servicio hasta que el pedal del freno de servicio se bloquee
mecánicamente.
8. Baje los estabilizadores, la punta de la cuchilla y / o el implemento para elevar el eje delantero y el eje
trasero. Esto permitirá que las ruedas giren libremente.
Nota: Todos los neumáticos deben estar completamente despegados del suelo.
Illustration 2 g02447061
Service connector located on the right side of cab behind the seat
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 2/6
20/4/2019 M315D Excavator W5M00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP4893 - 41) - Sistemas y componentes
13. Connect tooling (E1) Cat ET and communication adapter (E2) to the service connector.
Illustration 3 g02552721
Power mode control button located on the soft panel switch
16. Push down on the power mode control button in order to activate power mode.
Note: The indicator light will be illuminated when power mode is activated.
17. Use the Monitor in the cab in order to disable the Automatic Engine Speed Control.
a. Select the "Performance" menu from the main menu on the monitor.
b. Select "AESC Status" from the "Performance" menu and change the value to "Inactive".
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 3/6
20/4/2019 M315D Excavator W5M00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP4893 - 41) - Sistemas y componentes
Illustration 4 g02447064
Joystick (front switch)
18. Disable the hydraulic modulation control, if equipped. Press the front switch on the right joystick in order to
deactivate hydraulic modulation.
19. The air conditioning should be turned off for the following test.
To prevent injury or death, make sure that the area around the machine
is clear of personnel and obstructions before operating the machine.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 4/6
20/4/2019 M315D Excavator W5M00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP4893 - 41) - Sistemas y componentes
Illustration 5 g01340103
ET Configuration Screen
5. Enter the value that corresponds with the limit that is to be set. Refer to Table 2 for the proper values.
Worksheet
Table 2
"Travel Speed - Test and Adjust"
Date: Machine Serial Number:
Travel
Speed 20 to 37 20 to 34 20 to 37 20 to 37 20 to 25 20 to 25
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 5/6
20/4/2019 M315D Excavator W5M00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP4893 - 41) - Sistemas y componentes
km/h (12 to km/h (12 to km/h (12 to km/h (12 to km/h (12 to km/h (12 to
23 mph) 21 mph) 23 mph) 23 mph) 16 mph) 16 mph)
Copyright 1993 - 2019 Caterpillar Inc. Sat Apr 20 2019 07:39:19 GMT-0500 (hora estándar de Colombia)
Todos los derechos reservados.
nodiers
Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 6/6