Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Los índices de vegetación son cocientes de bandas que indican qué tan sana está la vegetación (con hojas).
La vegetación sana refleja una gran cantidad de energía infrarroja (entre los 700 y los 1,300 nm [0.700 y 1.3 um]),
refleja en una buena medida la energía del color verde (entre los 495 y 570 nm) menor cantidad la energía del rojo
(entre los 620 y 700 nm) y absorbe casi la totalidad del color azul (entre los 450 y 495 nm).
La estructura de la hoja:
Refleja el NIR y absorbe el azul, verde y rojo
*El rojo es reflejado en una parte
Sensor Landsat 8 OLI-TIRS
Bandas de Landsat 8 (Sensores OLI y TIRS)
Longitud de
Banda Nombre Resolución (m)
onda (μm)
Escala de color
Suelo Vegetación
Otros índices:
Índice de diferencia de vegetación (Difference Vegetation Index, DVI):
Este índice distingue entre suelo y vegetación, pero no toma en cuenta la diferencia entre reflexión y radiación causada
por efecto de la atmósfera o por sombras.
Ref: Tucker, C. "Red and Photographic Infrared Linear Combinations for Monitoring Vegetation. Remote Sensing of Environment 8 (1979): 127–150.
Este índice fue originalmente desarrollado para su uso con imágenes de MODIS y es una mejora al NDVI optimizando la señal
de la vegetación en áreas de área de hoja grandes (LAI). Es muy útil en regionas de alto LAI y es más útil en regiones donde el
NDVI podría saturarse. Usa la region del azul para corregir por suelo y para reducer los efentos de la atmósfera .
Reference: Huete, A., et al. "Overview of the Radiometric and Biophysical Performance of the MODIS Vegetation Indices." Remote Sensing of Environment 83
(2002):195–213.
DVI:
NDVI DVI
Índice Global de Monitoreo Ambiental (Global Environmental Monitoring Index, GEMI)
Éste índice no-lineal intenta corregir los efectos de la atmósfera. Es similar al NDVI pero es menos sensitivo a los efectos de
la atmósfera. Este índice se ve afectado por el suelo desnudo, por lo tanto, su uso no es recomendado en áreas de
vegetación esparcida.
Donde:
Ref.: Pinty, B., and M. Verstraete. GEMI: a Non-Linear Index to Monitor Global Vegetation From Satellites. Vegetation 101 (1992): 15-20.
GEMI:
Every index has its limitations. NDVI is sensitive to the effects of soil and atmosphere, that’s why it’s recommended to apply additional indexes for more
accurate analysis of vegetation.
SAVI
When to use: for analysis of young crops; for arid regions with sparse vegetation (less than 15% of total area) and exposed soil surfaces.
ARVI
When to use: for regions with high content of atmospheric aerosol (e.g. rain, fog, dust, smoke, air pollution).
EVI
EVI = 2.5 * ((NIR – Red) / ((NIR) + (C1 * Red) – (C2 * Blue) + L))
When to use: for analyzing areas of Earth with large amounts of chlorophyll (such as rainforests), and preferably with minimum topographic effects (not mountainous regions).
GCL
When to use: for monitoring the impact of seasonality, environmental stresses, applied pesticides on plant health.
SIPI
When to use: for monitoring plant health in regions with high variability in canopy structure or leaf area index, for early detection of plant disease or other causes of stress.
NBR
When to use: the typical use of NBR index for agriculture and forestry is detection of active fires, analysis of burn severity, and monitoring of vegetation survival after the burn.
NDVI en zonas de incendios forestales
Cananea
AOI
NDVI en zonas de incendios forestales
R-G-B SWIR2-G-CB
NDVI en zonas de incendios forestales
SWIR2-G-CB NDVI
NDVI clasificado