ESCUELA POLITECNICA NACIONAL — FPN cd
FACULTAD DE INGENIERIA MECANICA - FIM
~ MECD413-GR3 ~ Mecénica de materiales aplicada (2022-A)
Deber 112
Fecha de entrega: I-agosto-2022
1 Para todos los ejercicios a seguir, determine el grado de indeterminacién. Luego, resuelva el ejercicio utilizando el
método de momento de area y ecuaciones de compatibilidad. Finalmente, grafique las curvas de fuerza cortante y
‘momento flector.
2. Determine los momentos de reaccién en los apoyos A
yB. El es constante.
A3. A simple beam AB is subjected to couples Mo and 2Mo acting as
shown in the figure. Determine the angles of rotation 9, and 8p at the
tends of the beam and the deflection v at point D where the load Mo is
applied.
| E
De
1 {Ho \fe 4
olay ia]: & 4,
; m
Ger
wh Ox; lo).4. A simple beam AB supports two concentrated loads P at the
positions shown in the figure. A support C at the midpoint of the
beam is positioned at distance d below the beam before the loads
are applied. Assuming that d = 10 mm, L = 6 m, E = 200 GPa,
and [= 198 - 10° mm‘, calculate the magnitude of the loads P so.
that the beam just touches the support at C.
YW3. Determine las reacciones en los apoyos y a