Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Proyecto 3
Proyecto 3
Sistema de
ahorro de
energía
Elizabeth Yulissa Martínez
Bermúdez
Proyecto semana
19
Aprendizaje
Digital
Laura Fierro Rodríguez
BUM M08
Preparatoria 2 de
octubre de 1968
Sistema Mecanizado de ahorro
de energía para una vivienda
con placa de Arduino
Introducción
En este proyecto lo que realice fue un sistema mecanizado para una vivienda,
su función es ahorrar gastos y energía, durante la noche las luces se pueden
encender automáticamente por la baja luminosidad que es el LED AMARILLO,
también puede graduarse la intensidad de la luz dentro de la casa y si se
necesita para algún lugar de la casa donde solo se encienda la luz si hay
alguien ahí ese es el led con el botton, el mecanismo de los motores se uso
PWM para graduar la velocidad de cada motor.
Materiales:
Arduino Uno R3
Leds
1KΩ
Photoresistor
250kΩ Potentiometer
H-bridge motor driver
DC Motor
9V batería
Siendo este su resultado al juntar todos los meteriales para nuestro proyecto
Código:
Al comenzar y dar inicio a nuestro circuito, se mostrará dos led que están apagados, con
nuestro Potenciometro lo giraremos hasta su máxima potencia para que nuestros Leds se
enciendan lentamente.
Funcionamiento
Costo
Conclusión
Power-saving machining
system for a home with an
Arduino board
Introduction
In this project what it did was a mechanized system for a house, its function
is to save expenses and energy, during the night the lights can be turned on
automatically due to the low luminosity that is the YELLOW LED, the intensity
of the light inside the house can also be adjusted and if it is needed for
somewhere in the house where the light is only turned on if there is someone.
Materials::
Arduino Uno R3
Leds
1KΩ
Photoresistor
250kΩ Potentiometer
H-bridge motor driver
DC Motor
9V batería
This being his result by gathering all the materials for our project.
Code:
When starting and starting our circuit, two LEDs will be shown that are
turned off, with our Potentiometer we will turn it to its maximum power so
that our LEDs turn on slowly.
Operation
With this, during the nights the lights can turn on automatically due
to the luminosity that this is the yellow Led as well as the intensity
of the Light in the house can also be adjusted.
This only turns on if there is only someone there who can manage
the button.
The mechanisms of the engines were used PMW to adjust the speed
of each engine. Its function inside the house is to open the garage
door since it sometimes becomes very tedious and it is so simple that
expenses would be saved, in my project I used Digital and Analog
entries to make the circuit of my project, each part of the circuit has
its purpose, this system is designed especially for homes that want to
be remolated and mechanized, when using LEDs there is.
Costo
Completion:
Our project can help many homes that want to be remodeled, as
well as prevent energy expenditure from being less. Taking into
account that this system will be more comfortable just as we
will leave behind the circuits with some type of switch.