Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Hoja de Características
Folha de Caracteristicas
Feature List
Feuille de Caractéristiques
Datenblatt
HE-715/HE-724/HE-725
ESPAÑOL
50
1 Frente de Mandos
250 90
2 Junta de Horno
210 130
1 170
3 Resistencia de Grill
4 Soporte Cromado
9 5 Parrilla
10 6 Bandeja
2 11
12 7 Bisagra
3
8 Puerta
13 9 Salida de Aire
14
4 de Refrigeración
10 Fijación al Mueble
5 15 11 Pantalla de Grill
12 Salida de Humos
6
13 Lámpara
14 Panel Trasero
7 15 Turbina
8
Frontal de Mandos
Modelo HE-715 1 2 3
Modelo HE-724/HE-725 1 2 3
1 Selector de funciones.
2 Reloj electrónico programador.
3 Selector de temperaturas.
3
3172439-003 EPIFA 30/07/13 09:32 Página 4
4
3172439-003 EPIFA 30/07/13 09:32 Página 5
Funciones del Reloj Electrónico volver a la hora actual basta con pulsar de
Avisador: Genera una señal acústica al cabo nuevo la tecla de forma prolongada.
del tiempo, para ello no es necesario que el Programación de la Duración del Cocinado
ESPAÑOL
horno esté cocinando.
1 Pulse las teclas ó hasta que el sím-
Duración del Cocinado: Permite cocinar duran- bolo se ilumine. A continuación pulse
te un tiempo seleccionado, a continuación el la tecla .
horno se apagará de forma automática.
2 Seleccione la duración, pulsando las teclas
Hora de Finalización del Cocinado: Permite ó .
cocinar hasta una hora establecida, a conti- 3 Posteriormente sonarán 2 beep seguidos,
nuación el horno se apagará de forma auto- se mostrará la hora actual y el símbolo
mática. permanecerá iluminado, indicando que su
Duración y Fin del Cocinado: Permite progra- horno se apagará de forma automática.
mar la duración y la hora de finalización del 4 Seleccione una función y una temperatura
cocinado. Con esta función el horno se pondrá de cocinado.
en marcha de forma automática a la hora
5 Transcurrida la duración del cocinado, el
necesaria para cocinar durante el tiempo
horno se desconectará, sonará una señal
seleccionado (Duración) y finalizando de forma
acústica y el símbolo parpadeará.
automática a la hora que le hayamos indicado
(Fin del Cocinado). 6 Pulse cualquier tecla para detener la señal
acústica, encendiéndose el horno de nuevo.
Programación del Avisador 7 Ponga los mandos en posición para apa-
1 Pulse la tecla hasta que el símbolo gar el horno.
se ilumine. A continuación pulse la tecla . En cualquier momento usted puede visualizar
2 Seleccione el tiempo tras el cual desea que el tiempo restante de cocinado, pulsando las
el reloj avise, pulsando las teclas ó . teclas ó hasta que el símbolo
3 Posteriormente sonarán 2 beep seguidos, parpadee y pulsando luego la tecla . En
se mostrará la hora actual y el símbolo ese momento usted puede modificar el tiempo
permanecerá iluminado, indicando que el seleccionado pulsando las teclas ó .A
avisador ya está programado. continuación escuchará 2 beep seguidos
como confirmación del cambio.
4 Transcurrido el tiempo programado, sonará
una señal acústica y el símbolo empe- Si desea ver de forma permanente el tiempo
zará a parpadear. restante hasta la finalización, pulse las teclas
ó hasta que el símbolo parpadee
5 Pulse cualquier tecla para detener la señal
y luego pulse la tecla de forma prolonga-
acústica, en ese momento el símbolo
da. El símbolo estará parpadeando. Para
se apagará.
volver a la hora actual basta con pulsar de
En cualquier momento usted puede visualizar nuevo la tecla de forma prolongada.
el tiempo restante, pulsando las teclas ó
hasta que el símbolo parpadee y pul- Programación de la Hora de Finalización del
sando luego la tecla . En ese momento Cocinado
usted puede modificar el tiempo seleccionado 1 Pulse las teclas ó hasta que el sím-
pulsando las teclas ó . A continuación bolo se ilumine. A continuación pulse
escuchará 2 beep seguidos como confirma- la tecla .
ción del cambio. 2 Seleccione la hora de finalización del coci-
Si desea ver de forma permanente el tiempo nado, pulsando las teclas ó .
restante hasta la finalización, pulse las teclas 3 Posteriormente sonarán 2 beep seguidos,
ó hasta que el símbolo parpadee se mostrará la hora actual y el símbolo
y luego pulse la tecla de forma prolonga- permanecerá iluminado, indicando que su
da. El símbolo estará parpadeando. Para horno se apagará de forma automática.
5
3172439-003 EPIFA 30/07/13 09:32 Página 6
6
3172439-003 EPIFA 30/07/13 09:32 Página 7
HE-715/HE-724/HE-725
50
1 Painel de Comandos
250 90 2 Junta do Forno
3 Resistência do Grill
210 130
1 170
4 Suporte Cromado
9 5 Grelha
10 6 Bandeja
2 11 7 Dobradiça
3 12
8 Porta
13 9 Saída de ar da
14 Refrigeração
4
10 Fixação ao Móvel
PORTUGUÉS
5 15 11 Ecran do Grill
12 Saída de Fumos
6 13 Lâmpada
14 Painel do Fundo
7 15 Turbina
8
Painel de Comandos
Modelo HE-715 1 2 3
Modelo HE-724/HE-725 1 2 3
1 Selector de funções.
2 Relógio electrónico.
3 Selector de temperatura.
7
3172439-003 EPIFA 30/07/13 09:32 Página 8
Funções do Forno
Uso do Forno
8
3172439-003 EPIFA 30/07/13 09:32 Página 9
PORTUGUÉS
Duração e Fim do Cozinhado: Permite progra- 5 Decorrida a duração do cozinhado, o forno
mar a duração e a hora de finalização do cozin- desligar-se-á, soará um sinal acústico e o
hado. Com esta função, o forno colocar-se-á símbolo piscará.
em funcionamento de forma automática à 6 Prima qualquer tecla para parar o sinal acús-
hora necessária para cozinhar durante o tico, ligando-se o forno de novo.
tempo seleccionado (Duração), finalizando de
7 Coloque os comandos na posição para
forma automática à hora anteriormente indica-
desligar o forno.
da. (Fim do Cozinhado).
A qualquer momento, pode visualizar o tempo
Programação do Avisador restante de cozinhado, premindo as teclas
ou até o símbolo piscar, e premindo
1 Prima a tecla até o símbolo ilumi-
de seguida a tecla . Neste momento, pode
nar-se. A seguir prima a tecla .
modificar o tempo seleccionado premindo as
2 Seleccione o tempo após o qual deseja que o teclas ou . A seguir ouvirá 2 beeps
relógio avise, premindo as teclas ou . seguidos, como confirmação da alteração.
3 Posteriormente, soarão 2 beeps seguidos, Se desejar ver de forma permanente o tempo
será mostrada a hora actual e o símbolo restante até à finalização prima as teclas
permanecerá iluminado, indicando que ou até o simbolo piscar e prima a tecla
o avisador já está programado. de forma prolongada. O símbolo pis-
4 Decorrido o tempo programado, soará um cará. Para voltar à hora actual, basta premir de
sinal acústico e o símbolo começará a novo a tecla de forma prolongada.
piscar.
5 Prima qualquer tecla para parar o sinal acús- Programação da Hora de Finalização do
tico, o símbolo desligar-se-á. Cozinhado
Em qualquer momento, pode visualizar o 1 Prima as teclas ou até o símbolo
tempo restante, premindo as teclas ou iluminar-se. De seguida prima a tecla .
até o símbolo piscar, e premindo de 2 Seleccione a hora de finalização do cozinha-
seguida a tecla . Neste momento, pode do, premindo as teclas ou .
alterar o tempo seleccionado premindo as 3 Posteriormente soarão 2 beeps seguidos,
teclas ou . A seguir ouvirá 2 beeps será mostrada a hora actual e o símbolo
seguidos como confirmação da alteração. permanecerá iluminado, indicando que
Se desejar ver de forma permanente o tempo o forno desligar-se-à de forma automática.
restante até à finalização prima as teclas 4 Seleccione uma função e uma temperatura
ou até o simbolo piscar e prima a tecla de cozinhado.
de forma prolongada. O símbolo pis- 5 Alcançada a hora seleccionada, o forno des-
cará. Para voltar à hora actual, basta premir de ligar-se-á, soará um sinal acústico e o sím-
novo a tecla de forma prolongada. bolo piscará.
9
3172439-003 EPIFA 30/07/13 09:32 Página 10
6 Prima qualquer tecla para parar o sinal acús- 9 Quando alcançar a hora de início do cozin-
tico, ligando-se o forno de novo. hado, o forno entrará em funcionamento e
7 Coloque os comandos na posição para realizar-se-á o cozinhado durante o tempo
desligar o forno. seleccionado.
10 Alcançada a hora final que tinha sido pro-
A qualquer momento pode visualizar a hora de gramada, o forno desligar-se-á, soará um
finalização do cozinhado, premindo as teclas sinal acústico e os símbolos e
ou até o símbolo piscar, e pre- piscarão.
mindo de seguida a tecla . Neste momen- 11 Prima qualquer tecla para parar o sinal
to, pode modificar a hora de finalização selec- acústico, ligando-se o seu forno de novo.
cionada premindo as teclas ou . A
12 Coloque os comandos na posição para
seguir ouvirá 2 beeps seguidos, como confir-
desligar o forno.
mação da alteração.
Se desejar modificar a hora de finalização,
Pode usar esta função mesmo que já esteja a
prima as teclas ou até se iluminar o
utilizar o forno. Para tal, siga as instruções
símbolo , e prima a tecla . A partir
indicadas, excepto a número 4.
deste momento, pode modificar a hora selec-
cionada premindo as teclas ou . A
Programação da Duração e Fim do Cozinhado
seguir ouvirá 2 beeps seguidos, como confir-
1 Prima as teclas ou até o símbolo mação da modificação.
iluminar-se. De seguida prima a tecla
. Atenção
2 Seleccione a duração, premindo as teclas No caso de um corte de fornecimento eléctri-
ou . co, será eliminada toda a programação do reló-
3 Posteriormente soarão 2 beeps seguidos, gio electrónico e aparecerá a indicação 00:00
será mostrada a hora actual e o símbolo a piscar no relógio. Deverá acertá-lo e progra-
permanecerá iluminado. má-lo de novo.
4 Prima as teclas ou até o símbolo
se iluminar. A seguir prima a tecla
.
5 Seleccione a hora de finalização do cozin-
hado, premindo as teclas ou .
6 Posteriormente soarão 2 beeps seguidos,
será mostrada a hora actual e o símbolo
permanecerá iluminado.
7 Seleccione uma função e uma temperatura
de cozinhado.
8 O forno permanecerá desligado, ficando ilu-
minados os símbolos e . O seu
forno está programado.
10
3172439-003 EPIFA 30/07/13 09:32 Página 11
HE-715/HE-724/HE-725
1 Control Panel
250
50
90
2 Oven Seal
1
210
170
130
3 Grill Element
4 Chrome Support
9 5 Grid
10 6 Tray
2 11
3 12 7 Hinge
13 8 Door
14 9 Air Outlet
4
10 Fixing to Unit
5 15 11 Grill Screen
12 Smoke Outlet
6
13 Light
14 Back Wall Panel
7
8 15 Fan
ENGLISH
Control Panel
Model HE-715 1 2 3
Modelo HE-724/HE-725 1 2 3
1 Function selector.
2 Electronic clock.
3 Temperature selector.
11
3172439-003 EPIFA 30/07/13 09:32 Página 12
Oven Functions
Grill Turbo
For preparing dishes with superficial roasting. The fan distributes the heat produced by an
It allows the outer layer to be browned without element located at the rear of the oven. Due to
affecting the inside of the food. Ideal for flat the uniform heat distribution, it allows roasting
food, such as steaks, ribs, fish, toast. and baking to take place at two heights at the
same time.
Caution
While using the Grill the door must be kept Defrosting
closed. This cooking mode is suitable for gently
defrosting of food. In special food to be
Lower element consumed unwarmed, e.g.: cream, custard,
Heats only from beneath. Suitable for heating pastry, tarts, cakes, fruit,...
dishes and raising pastry and similar.
Note
12
3172439-003 EPIFA 30/07/13 09:32 Página 13
ENGLISH
2 Set the period of time after which you wish confirm the change.
the alarm to sound by pressing or . If you wish the remaining time to be displayed
3 The clock beeps twice, the current time is until the end of the set period of time, press
displayed and symbol lights up perma- or until symbol flashes and then
nently to indicate that the alarm has been press OK and keep it pressed in. Symbol
set. flashes. Keep pressed in again to return
to the real time.
4 When the set period of time comes to an
end, the alarm sounds and symbol
starts to flash. Setting the End Cooking Time
5 Press any button to stop the alarm; symbol 1 Press or until symbol lights up.
goes out. Press .
You can consult the remaining time at any 2 Select the time you wish the cooking
moment by pressing or until symbol process to finish at by pressing or .
flashes and then pressing . You can
also modify the set time at this point by press- 3 The clock beeps twice, the current time is
ing or . The clock beeps twice to con- displayed and symbol lights up perma-
firm the change. nently to indicate that the oven will turn
itself off automatically.
If you wish the remaining time to be displayed
until the end of the set period of time, press 4 Select a cooking function and temperature.
or until symbol flashes and then 5 When the set time is reached, the oven
press and keep it pressed in. Symbol turns itself off, the alarm sounds and symbol
flashes. Keep pressed in again to flashes.
return to the real time. 6 Press any button to stop the alarm and turn
the oven back on again.
13
3172439-003 EPIFA 30/07/13 09:32 Página 14
7 Set the controls to to turn the oven off. 9 When the time to start cooking is reached,
the oven starts up and cooks for the set
You can consult the end cooking time at any period of time.
moment by pressing or until symbol
10 When the set end cooking time is reached,
flashes and then pressing . You can
the oven turns itself off, the alarm sounds
also modify the end cooking time at this point
and symbols and flash.
by pressing or . The clock beeps twice
to confirm the change. 11 Press any button to stop the alarm and
turn the oven back on again.
This function can be used even when you are
already using the oven. To do this, follow the 12 Set the controls to to turn the oven off.
instructions indicated above except point You can modify the end cooking time by press-
number 4. ing or until symbol lights up and
then pressing . You can now modify the
Setting the Cooking Time and the End end cooking time by pressing or . The
Cooking Time clock beeps twice to confirm the change.
1 Press or until symbol lights
up. Press . Important
2 Select the period of time you wish to cook In the event of a power cut, all the electronic
for by pressing or . clock settings are deleted and the indication
3 The clock beeps twice, the current time is 00:00 flashes on the display. It is necessary to
displayed and symbol lights up per- set the time and programme the clock again.
manently.
4 Press or until symbol lights
up. Press .
5 Select the time you wish the cooking
process to finish at by pressing or .
6 The clock beeps twice, the current time is
displayed and symbol lights up per-
manently.
7 Select a cooking function and temperature.
8 The oven remains off with symbols
and lit up. Your oven is set.
14
3172439-003 EPIFA 30/07/13 09:32 Página 15
HE-715/HE-724/HE-725
50
1 Panneau de Commande
250 90 2 Joint de four
3 Résistance du Grill
210 130
1 170
4 Support Chromé
9 5 Grille
10 6 Plateau
2 11 7 Charnière
3 12
8 Porte
13 9 Sortie de l’air
14 de Réfrigération
4
10 Fixation au Meuble
5 15 11 Ecran du Grill
12 Sortie des Fumées
6 13 Lampe
14 Panneau du Fond
7 15 Turbine
8
Modèle HE-715 1 2 3
FRANÇAIS
Modelo HE-724/HE-725 1 2 3
1 Sélecteur de fonctions.
2 Horloge électronique.
3 Sélecteur de températures.
15
3172439-003 EPIFA 30/07/13 09:32 Página 16
Fonctions du Four
Maniement du Four
16
3172439-003 EPIFA 30/07/13 09:32 Página 17
FRANÇAIS
2 Sélectionnez le temps au bout duquel vous pour éteindre le four.
souhaitez que l’horloge vous avertisse en Vous pouvez afficher le temps de cuisson res-
appuyant sur les touches ou . tant à tout moment en appuyant sur les
3 Vous entendrez alors 2 bips consécutifs, touches ou jusqu’à ce que le symbole
l’heure actuelle sera affichée et le symbole clignote, puis en appuyant sur la touche
s’allumera, indiquant que l’avertisseur . Vous pouvez alors modifier le temps
est programmé. sélectionné en appuyant sur les touches
ou . Vous entendrez 2 bips consécutifs
4 Une fois le temps programmé écoulé, un
comme confirmation de la modification.
signal acoustique sonnera et le symbole
Si vous souhaitez afficher de façon permanen-
commencera à clignoter.
te le temps restant jusqu’à la fin, appuyez sur
5 Appuyez sur n’importe quelle touche pour les touches ou jusqu’à ce que le sym-
arrêter le signal acoustique, à ce moment le bole clignote and appuyez sur la touche
symbole s’éteindra. de façon prolongée. Le symbole cli-
Vous pouvez afficher le temps restant à tout gnotera. Pour revenir à l’heure actuelle, il suf-
moment en appuyant sur les touches ou fit d’appuyer à nouveau sur la touche de
jusqu’à ce que le symbole clignote, façon prolongée.
17
3172439-003 EPIFA 30/07/13 09:32 Página 18
18
3172439-003 EPIFA 30/07/13 09:32 Página 19
HE-715/HE-724/HE-725
50
1 Frontteil
250 90 2 Herddichtung
3 Grillwiderstand
210 130
1 170
4 Verchromte Halterung
9 5 Rost
10 6 Auffangschale
2 11 7 Scharnier
3 12
8 Tür
13 9 Kühlluftaustritt
14 10 Befestigung am
4
Küchenmöbel
5 15 11 Grillschale
12 Abzug
6 13 Beleuchtung
14 Rückwand
7 15 Lüfter
8
Bedienfeld
Modell HE-715 1 2 3
Modelo HE-724/HE-725 1 2 3
DEUTSCH
1 Funktionswahl.
2 Elektronische Schaltuhr.
3 Temperaturregler.
19
3172439-003 EPIFA 30/07/13 09:32 Página 20
20
3172439-003 EPIFA 30/07/13 09:32 Página 21
Funktionen der elektronischen Schaltuhr Symbol blinkt. Wenn Sie die Taste
Signalgeber: Sendet ein akustisches Signal nochmals etwas länger betätigen, erfolgt die
nach Ablauf der eingestellten Zeit aus, der Rückkehr zur Anzeige der Uhrzeit.
Herd muss hierzu nicht eingeschaltet sein.
Dauer des Garvorgangs: Gestattet das Garen Programmierung der Garzeiten
während der eingestellten Zeit, anschließend 1 Betätigen Sie die Taste oder bis das
wird der Herd automatisch abgeschaltet. Symbol aufleuchtet. Drücken Sie
Endzeit des Garvorgangs: Gestattet das anschließend die Taste .
Garen bis zu der eingestellten Zeit, 2 Stellen Sie mit den Tasten oder die
anschließend wird der Herd automatisch gewünschte Dauer ein.
abgeschaltet. 3 Anschließend ertönen zwei kurze Signale, es
Dauer und Ende des Garvorgangs: Mit Hilfe wird die aktuelle Uhrzeit angezeigt und das
dieser Funktion können Sie die Dauer des Symbol leuchtet und zeigt an, dass der
Garvorgangs und die Uhrzeit einstellen, zu Herd nach Ablauf der eingestellten Zeit
welcher dieser abgeschlossen sein soll. Mit automatisch abgeschaltet wird.
dieser Funktion wird der Herd zum 4 Wählen Sie eine Garfunktion aus und stellen
erforderlichen Zeitpunkt automatisch Sie die gewünschte Temperatur ein.
eingeschaltet, bleibt für die gewählte Dauer in 5 Nach Ablauf der eingestellten Garzeit
Betrieb und schaltet sich automatisch zu der schaltet sich der Herd ab, es ertönt ein
gewählten Endzeit aus (Ende des Garvorgangs). akustisches Signal und die Kontrolleuchte
beginnt zu blinken.
Programmierung des akustischen Signals 6 Betätigen Sie eine beliebige Taste zum
1 Betätigen Sie die Taste bis das Symbol Abstellen des Signaltons, hierdurch wird der
aufleuchtet. Drücken Sie anschließend Herd erneut eingeschaltet.
die Taste . 7 Zum Abschalten des Herds bringen Sie alle
2 Stellen Sie mit den Tasten oder die Bedienelemente in Stellung .
Zeit ein, nach der die Schaltuhr das Signal Sie können die restliche Garzeit anzeigen, indem
abgeben soll. Sie die Taste oder so oft betätigen, bis
3 Anschließend ertönen zwei kurze Signale, es das Symbol blinkt, anschließend
wird die aktuelle Uhrzeit angezeigt und das bestätigen Sie mit der Taste . Jetzt können
Symbol leuchtet und zeigt an, dass der Sie die gewählte Restzeit mit den Tasten
Signalgeber programmiert ist. oder verändern. Nach Abschluss der
4 Nach Ablauf der eingestellten Zeit ertönt ein Einstellung werden die Änderungen mit zwei
akustisches Signal und das Symbol kurzen Signaltönen bestätigt.
blinkt. Wenn Sie eine dauernde Anzeige der Restzeit
5 Das akustische Signal wird durch Betätigen wünschen, indem Sie die Taste oder so
einer beliebigen Taste abgeschaltet und das oft betätigen, bis das Symbol blinkt und
Symbol verlischt. betätigen Sie die Taste etwas länger. Das
Sie können die Restzeit anzeigen, indem Sie Symbol blinkt. Wenn Sie die Taste
die Taste oder so oft betätigen, bis das nochmals etwas länger betätigen, erfolgt die
Symbol blinkt, anschließend bestätigen Rückkehr zur Anzeige der Uhrzeit.
Sie mit der Taste . Jetzt können Sie die
gewählte Restzeit mit den Tasten oder Programmierung der Uhrzeit für das Ende des
DEUTSCH
22
3172439-003 EPIFA 30/07/13 09:32 Página 23
3172439-003 EPIFA 30/07/13 09:32 Página 24
Tiempo de Tempo de Time to cook Temps de Kochzeit bei Our contribution to enviromental protection: we use recycled paper.
cocción con cozedura da standard load. cuisson en Standardbela-
carga normal. carga-padrão. charge normale. dung.
Ruido (dB (A) Nível de ruído Noise (dB (A) Bruit (dB (A) re Geräusch (dB
re 1 pW). dB(A) re 1 pW. re 1 pW). 1 pW). (A) re 1 pW).