Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Manual NanoKONTROL2 Espanol
Manual NanoKONTROL2 Espanol
ar la unidad con el software DAW 2. Configure la aplicación para que puedan controlarla los mensajes
Introducción de Cambio de Control transmitidos desde el nanoKONTROL2. Para
Esta sección describe diversos ajustes para varios programas del
Gracias por comprar el controlador extraplano USB Korg más información acerca de la configuración de la aplicación,
Puertos del Controlador software DAW. Para más información, consulte la Guía de Parámetros.
consulte el manual de usuario de la misma.
nanoKONTROL2. Por favor, lea este manual atentamente y guárdelo Para más información acerca de los ajustes detallados y el
Como se muestra en la siguiente tabla, el nombre de los puertos
para futuras consultas. funcionamiento del distinto software DAW, consulte el manual del
dependerá del sistema operativo que está utilizando, y si no ha
Para utilizar correctamente este producto, deberá definir alguno instalado el controlador Korg USB-MIDI. usuario correspondiente. Solución de Problemas
de los ajustes en la aplicación que utilice. Defina los ajustes de la
forma descrita en la sección “Ajustes para utilizar la unidad con Sistema operativo MIDI IN MIDI OUT Cubase La unidad no se enciende
el software DAW” de este manual y en el manual del usuario de Mac OS X nanoKONTROL2 nanoKONTROL2 CTRL 1. Mientras mantiene pulsados los botones SET MARKER y REW, • Si está usando un Hub USB pasivo (sin alimentación independiente),
su aplicación. SLIDER/KNOB conecte el cable USB desde su ordenador al nanoKONTROL2.
es posible que el nanoKONTROL2 no se encienda. Si ocurre esto
El software Korg Kontrol Editor permite editar los mensajes MIDI Windows XP Disp. USB audio Disp. USB audio 2. Abra la ventana “Device setting” en Cubase y añada “Mackie conecte el nanoKONTROL2 a un Hub USB con alimentación
transmitidos desde cada controlador del nanoKONTROL2. Puede Windows Vista/7/8 nanoKONTROL2 nanoKONTROL2 Control”. independiente o directamente a su ordenador.
descargar la Guía de Parámetros y el software Korg Kontrol Windows XP/Vista/7/8+ nanoKONTROL2 1 nanoKONTROL2 1 CTRL 3. Seleccione nanoKONTROL2 como puertos MIDI In/Out utilizados
Editor desde el sitio web de Korg. por “Mackie Control”. El Software no responde
KORG USB-MIDI Driver SLIDER/KNOB
http://www.korg.co.jp/English/Distributors/ o http://www.korg.com • Asegúrese que nanoKONTROL2 ha sido detectado por el ordenador.
Puerto MIDI IN Digital Performer En Windows XP, vaya a Panel de Control, Dispositivos de Sonido y
1. Mientras mantiene pulsados los botones SET MARKER y FF, Audio y compruebe la Pestaña “Hardware”.
Procedimientos Iniciales Aquí se reciben los mensajes MIDI de los controladores del
nanoKONTROL2. Si desea usar el nanoKONTROL2 para controlar
conecte el cable USB desde su ordenador al nanoKONTROL2. En Windows Vista/7/8, vaya a Panel de Control, abra Hardware y
una aplicación de su ordenador, Seleccione este puerto en los Ajustes Ajustes para “Configuración de Audio MIDI” Sonidos, ver Hardware y Dispositivos y compruebe Controladores
Conexiones y alimentación de Sonido, vídeo y juegos.
MIDI In de su aplicación. Este puerto también es usado por el Software
• Desde “Configuración de Audio MIDI”, En Mac OS X, abra Aplicaciones, Utilidades, Ajustes de Audio y
Korg Kontrol Editor para controlar al nanoKONTROL2.
abra “Dispositivo MIDI” o “Estudio MIDI” MIDI e inicie “Audio MIDI Setup.”
Puerto MIDI OUT y seleccione “Añadir dispositivo”. En Mac OS X 10.5 o anterior, compruebe la pestaña “MIDI Devices”.
Este puerto lo utiliza el software DAW o el Korg Kontrol Editor para • Dele un nombre al dispositivo añadido. En Mac OS X 10.6 o posterior, abra y compruebe “MIDI Studio”
USB cable controlar el nanoKONTROL2. (p.ej., nanoKONTROL2 DP) seleccionando “Show MIDI Window” en el menú de ventana
nanoKONTROL2
• Conecte el dispositivo añadido con el “Window”.
Ordenador USB conector Si está usando Microsoft Windows XP/Vista/7/8, el controlador
nanoKONTROL2, tal como se muestra a • Asegúrese que nanoKONTROL2 está Seleccionado como puerto
USB-MIDI que se instala no le permitirá usar el nanoKONTROL2
1. Conecte el nanoKONTROL2 a su ordenador con un cable USB. El la izquierda. MIDI de la aplicación que está usando.
con varias aplicaciones a la vez. Si desea usar el nanoKONTROL2
nanoKONTROL2 se enciende y también se enciende el LED. con varias aplicaciones a la vez, es necesario que instale el • Es posible que la aplicación que use no soporte una función
2. Abra la ventana “Control Surface” de Digital Performer y seleccione
Nunca utilice un cable USB distinto del que se ha incluido. controlador Korg USB-MIDI. Descargue el controlador Korg USB- específica. Por favor, consulte la documentación de su aplicación
“Mackie Control” para “Driver” y “Unit”.
El nanoKONTROL2 se inicia en el modo operativo seleccionado MIDI de la Página Web de Korg, e instálelo siguiendo las Software.
3. Seleccione los puertos nanoKONTROL2 para “MIDI”.
cuando se utilizó la unidad por última vez. En este momento, instrucciones. • Para utilizar algunas de las funciones de este producto, deberá
parpadeará el botón de transporte correspondiente al modo http://www.korg.co.jp/English/Distributors/ o http://www.korg.com GarageBand/Logic ajustar algunos de los ajustes de la aplicación host que utilice. Defina
operativo actual. (--> “Modo operativo”) Aún en el caso de que no necesite usar el nanoKONTROL2 con Descargue el plug-in nanoKONTROL2 Control Surface para los ajustes de la forma descrita en la sección “Ajustes para utilizar
La primera vez que conecte el nanoKONTROL2 a su ordenador varias aplicaciones a la vez, le recomendamos que instale el GarageBand/Logic desde el sitio web de Korg y siga las instrucciones la unidad con el software DAW” de este manual y en el manual del
Windows XP/Vista/7/8, se instalará Automáticamente el controlador Korg USB-MIDI para un funcionamiento más estable. en el documento incluido para especificar los ajustes. usuario para su aplicación.
controlador estándar USB-MIDI para su sistema operativo. http://www.korg.co.jp/English/Distributors/ o http://www.korg.com
- Mac, Mac logo y Mac OS de Mac son marcas comerciales de Apple Inc. registradas en los EE.UU. y en otros países.
- Windows XP/Vista/7 son marcas comerciales de Microsoft Corporation registradas en los EE.UU. y en otros países.
- Todos los nombres de productos y compañías son marcas comerciales o marcas registradas de sus respectivos propietarios.
- Las especificaciones y el aspecto están sujetas a cambios sin previo aviso por mejora.
Introducción
Introducción
Esta guía de parámetros de nanoKONTROL2 explica los parámetros que se pueden editar en el nanoKONTROL2.
Lea esta guía cuando desee ajustar o cambiar la configuración.
Preparaciones
Utilizará el software KORG KONTROL Editor para editar los parámetros de nanoKONTROL2.
Descargue la última versión del KORG KONTROL Editor desde el sitio Web de KORG (http://www.korg.co.jp/English/Distributors/ o http://www.korg.com/) e instalarlo.
Para obtener más información sobre cómo instalar y utilizar el software KORG KONTROL Editor, consulte el manual de usuario de KORG KONTROL Editor.
3
Los Parámetros de nanoKONTROL2
CC Cada uno de los controladores de nanoKONTROL2 transmitirá el mensaje de cambio de control que haya asignado.
Cubase El nanoKONTROL2 funcionará con la configuración adecuada para controlar Cubase.
Digital Performer El nanoKONTROL2 funcionará con la configuración adecuada para controlar Digital Performer.
Live El nanoKONTROL2 funcionará con la configuración adecuada para controlar Live.
ProTools El nanoKONTROL2 funcionará con la configuración adecuada para controlar ProTools.
SONAR El nanoKONTROL2 funcionará con la configuración adecuada para controlar ProTools.
Si desea utilizar el nanoKONTROL2 con GarageBand/ Logic, Descargue el plug-in nanoKONTROL2 Control Surface para GarageBand/ Logic del sitio Web de
KORG y ajuste la configuración como se indica en la documentación que se adjunta (http://www.korg.co.jp/English/Distributors/ o http://www.korg.com/).
4
Ajustes en Modo CC
Ajustes en Modo CC
Aquí explicamos cómo ajustar la configuración si ha elegido “CC” como el modo de operación.
Grupo de Control
Cada grupo que contiene un botón, Deslizante y tres botones (Solo, Mute, Rec) es colectivamente llamado un “grupo de control”.
El nanoKONTROL2 tiene ocho grupos de control.
5
Ajustes en Modo CC
Botones
Se enviará un mensaje de cambio de control cuando se utiliza un botón. Puede habilitar o deshabilitar cada botón, especificar su número de
cambio de control y especificar los valores que se transmitirán cuando se mueve el botón completamente a la izquierda o a la derecha.
CC Number [0...127]
Especifica el número del mensaje de cambio de control que se transmitirá.
Deslizantes
Se enviará un mensaje de cambio de control cuando se utiliza un Deslizante. Puede habilitar o deshabilitar cada Deslizante, especificar su
número de cambio de control y especificar los valores que se transmitirán cuando se mueve el Deslizante completamente arriba o abajo.
CC Number [0...127]
Especifica el número del mensaje de cambio de control que se transmitirá.
6
Ajustes en Modo CC
On Value [0...127]
Especifica el valor del mensaje de cambio de control que se transmite cuando el botón está activado.
7
Ajustes en Modo CC
Si Assign Type es “Note,” se enviará el mensaje de con el valor On Value como la velocidad. Si On Value es “0”, la velocidad será
transmitida como “1”.
La configuración del canal MIDI de botón de transporte es común a los once botones de transporte.
8
Ajustes en Modo CC
On Value [0...127]
Especifica el valor del mensaje de cambio de control que se transmite cuando el botón está activado.
Si Assign Type es “Note,” se enviará el mensaje de con el valor On Value como la velocidad. Si On Value es “0”, la velocidad será
transmitida como “1”.
Modo LED
Esto le permite especificar cómo se iluminarán los indicadores LED de los botones de transporte y el botón Solo, botón de silencio y botón de grabación de los grupos de
control. Esta opción especifica cómo se controlará el estado encendido/apagado de los LEDs.
9
Funcionamiento en Modo de Control DAW
No podemos garantizar la funcionalidad para todas las versiones del software DAW.
Cubase
1. Después de conectar el nanoKONTROL2, elija el elemento de menú de Cubase “Devices”➔”Device Settings.”
2. En la pantalla, haga clic en “Set Up MIDI Ports.”
3. Para “nanoKONTROL2 SLIDER/KNOB” y “nanoKONTROL2 CTRL,” quite la marca de verificación “Include in All MIDI Inputs”.
PREV TRACK
Cambia las pistas que son controladas por los grupos de control al grupo anterior o siguiente de ocho pistas.
NEXT TRACK
SET MARKER Asigna un marcador.
PREV MARKER
Mueve al marcador anterior o siguiente.
NEXT MARKER
Digital Performer
PREV TRACK
Cambia las pistas que son controladas por los grupos de control al grupo anterior o siguiente de ocho pistas.
NEXT TRACK
SET MARKER No ocurrirá nada cuando se presiona este botón.
PREV MARKER
Mueve al marcador anterior o siguiente.
NEXT MARKER
10
Funcionamiento en Modo de Control DAW
Cuando se utiliza Digital Performer, el botón de transporte CYCLE funcionará como Memory Cycle on/off. El botón CYCLE no se iluminará aunque Memory
Cycle esté en on.
Live
PREV TRACK
Cambia las pistas que son controladas por los grupos de control al grupo anterior o siguiente de ocho pistas.
NEXT TRACK
SET MARKER Asigna un marcador.
PREV MARKER
Mueve al marcador anterior o siguiente.
NEXT MARKER
ProTools
PREV TRACK
Cambia las pistas que son controladas por los grupos de control al grupo anterior o siguiente de ocho pistas.
NEXT TRACK
SET MARKER Asigna un marcador.
PREV MARKER
Mueve al marcador anterior o siguiente.
NEXT MARKER
SONAR
PREV TRACK
Cambia las pistas que son controladas por los grupos de control al grupo anterior o siguiente de ocho pistas.
NEXT TRACK
SET MARKER No ocurrirá nada cuando se presiona este botón.
PREV MARKER
Mueve al marcador anterior o siguiente.
NEXT MARKER
11
Funcionamiento en Modo de Control DAW
Dependiendo de su software DAW, es posible que algunas de estas operaciones no se admitan, o podrían comportarse de manera diferente.
12
Restaurar los Ajustes de fábrica
Después de encender la unidad, tardará unos segundos para que se restaure la configuración de fábrica. Nunca se debe apagar la unidad mientras se realiza esta
operación.
13
Solución de Problemas
Solución de Problemas
• La aplicación no responde a los mensajes MIDI enviados desde el nanoKONTROL2
- Asegúrese que el canal MIDI de los mensajes que se transmiten desde nanoKONTROL2 coincide con el canal MIDI de la aplicación.
- Cuando se utiliza nanoKONTROL2 con el software DAW, debe establecer el DAW para utilizar el nanoKONTROL2. Seleccione la configuración adecuada como se
describe en la sección del manual de usuario de nanoKONTROL2 “Modos operativos” y en la documentación para el software DAW.
14
[Slim-Line USB Controller] Date : 2011.4.12
Version : 1.00
Model: nanoKONTROL2 MIDI Implementation Chart
Transmitted Recognized Remarks
Function...
0 – 127 Knobs *2
Sliders
Transport buttons
Function buttons
Control Solo buttons
Change Mute buttons
Rec buttons
Program
Change Variable Range
System Exclusive *4
Song Position
System
Song Select
Common
Tune Request
System Clock
Real Time Commands
*1
Aux *1
Messages
Notes
Consult your local Korg distributor for more information on MIDI implementation.
nanoKONTROL2 System Firmware Update
This updater is compatible with Windows XP SP3, Windows Vista SP2, and Windows 7 SP1.
The latest “KORG USB-MIDI Driver” needs to be installed before the update.
Download the driver from the KORG website and install it as directed by the included
documentation.(http://www.korg.com)
If the driver installed on your computer is older than latest version, install the latest version of
the driver before starting the update.
Unzip all the files in the zip file before proceeding to [Step 2]. The updater will not be able to
find all the necessary files if they were not unzipped.
2. Turn on the Power of the nanoKONTROL2 while holding the [MARKER <] and [MARKER >] and
[CYCLE] buttons. This will put it in “Update Mode”.
3. Execute the kmupdate.exe. The following window will appear: (This is the image of the
updater window when the nanoKONTROL2 version is 1.01, and the latest version is 1.03)
1
4. Push the [Update] button in the window to start the process.
If the following message is shown, the system firmware is already up to date, and no change
is needed. In this case simply quit the KORG System Updater.
The updater can’t recognize the nanoKONTROL2 if [Step 2] and [Step 3] are not done
5. During the updating process, the following window will appear. The whole process might take
several minutes to complete.
2
Do not turn off the nanoKONTROL2 during the update process.
6. The following message will be shown when the update has successfully completed.
This will conclude the entire update procedure.
8. You can confirm the current system version by the [Select Device] command on the [File]
menu of the KORG KONTROL Editor.
3
KONTROL Editor
Table of Contents
Introduction..........................................................................................................................2
What is the KORG KONTROL Editor?................................................................................................... 2
Operating requirements......................................................................................................................... 2
Installation............................................................................................................................3
Installation for Windows users.............................................................................................................. 3
Installation for Mac users....................................................................................................................... 3
Quick start............................................................................................................................4
Starting the KORG KONTROL Editor.................................................................................................... 4
Editing scene data.................................................................................................................................. 4
What are scene data and scene sets?............................................................................................................................. 5
Writing scene data into your Korg MIDI controller.............................................................................. 5
KORG KONTROL Editor screens and functions...............................................................6
Device select screen............................................................................................................................... 6
Show only connected devices.......................................................................................................................................... 6
Link to the software bundle download site....................................................................................................................... 6
Main screen............................................................................................................................................. 7
Items on the screen and their function............................................................................................................................. 7
Basic operation................................................................................................................................................................. 8
Other operations............................................................................................................................................................... 8
Global data setting screen..................................................................................................................... 9
Items on the screen and their functions........................................................................................................................... 9
Preference settings............................................................................................................................... 10
MIDI ports....................................................................................................................................................................... 10
Other.............................................................................................................................................................................. 10
File management................................................................................................................11
Menu....................................................................................................................................13
File.......................................................................................................................................................... 13
Edit......................................................................................................................................................... 13
Send....................................................................................................................................................... 14
Help........................................................................................................................................................ 14
Troubleshooting.................................................................................................................15
Software won’t start up........................................................................................................................ 15
Can’t transfer data................................................................................................................................ 15
Can’t save global data in a file............................................................................................................. 15
-- Mac, Mac logo and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
-- Windows 7 , Windows 8.1 and Windows 10 are trademarks of Microsoft Corporation in the US and other countries.
-- All product names and company names are the trademarks or registered trademarks of their respective owners.
-- Specifications and appearance are subject to change without notice for improvement.
Caution
Do not disconnect your Korg MIDI controller while the KORG KONTROL Editor is running.
Do not use your Korg MIDI controller or the KORG KONTROL Editor while any data is being transmitted.
Operating requirements
Windows
Operating system Microsoft Windows 7 SP1(32bit, 64bit) or later.
Mac
Operating system OS X 10.8 Mountain Lion or later.
Controls
Device
Controls
1. SCENE buttons will be displayed if the device has more than one scene. Click the scene that you want to edit.
2. In the screen, click the control that you want to edit.
3. The parameters of the selected control are shown in the parameter edit area in the lower right pane.
This is where you can edit the parameters.
Do not use your Korg MIDI controller or the KORG KONTROL Editor while any data is being transmitted.
If this is the device whose parameter settings you want to edit, click the OK button.
Controls
Device
CONTROL tab
BROWSE tab Parameter display switch
SCENE button
Click the SCENE button of the scene that you want to edit.
Controls
This area shows the parameters that you selected using the parameter display switch.
If you've selected a parameter that the control does not have, this will indicate “--”.
When you click this, the parameters of the control will appear in the parameter display area.
Basic operation
Here’s the basic procedure for editing in the main screen.
1. If your device has more than one scene, the SCENE buttons are displayed. Select the scene that you want to edit.
2. Click a control in the device image or in the control list of the CONTROL tab.
3. The parameters of the selected control are shown in the parameter edit area. Edit the parameters here.
For details on each parameter, refer to the owner's manual of your Korg MIDI controller.
Other operations
Cut, Copy, Paste, Clear
You can edit the settings for the SCENE buttons and the controls in the CONTROL tab, by performing “Cut,” “Copy,” “Paste,”
and “Clear” operations from the “Edit” menu.
Receive button
This lets you load global data from the Korg MIDI controller.
Write button
Click this button to write edited global data to the Korg MIDI controller.
Open button
Click this button to load a global data file.
Save button
Click this button to save edited global data as a global data file with a new name.
Close button
Click this button to close the global data setting screen and return to the main screen.
MIDI ports
Set MIDI ports manually
Turn this on if you want to specify the MIDI ports manually instead of using automatic device detection.
If this setting is on, use the MIDI IN and MIDI OUT fields to specify the ports where your Korg MIDI controller is connected.
MIDI IN
Specify the MIDI IN port where your Korg MIDI controller is connected.
MIDI OUT
Specify the MIDI OUT port where your Korg MIDI controller is connected.
Other
Recieve scene set automatically
If this setting is off, scene data will not be automatically loaded from your Korg MIDI controller when the main screen for
the device is shown.
New
Creates a new scene set for the device that is currentry selected.
For devices that do not feature multiple scenes, use this command to make new scene data.
Open
Loads a scene set file. If you select a file for a device other than the one selected in the main screen, the main screen for
the device of the selected file will appear.
For devices that do not feature multiple scenes, use this command to load scene data.
Save
Saves the edited scene set by overwriting the existing scene set file.
For devices that do not feature multiple scenes, use this command to save scene data to an existing file.
Save As
Saves the edited scene set as a new file with the name you specify.
For devices that do not feature multiple scenes, use this command to save scene data as a new file.
Load Scene Data
Loads a scene data file into the edited scene.
This command is unavailable for devices that do not feature multiple scenes.
Save Scene Data
Saves the edited scene as a scene data file.
This command is unavailable for devices that do not feature multiple scenes.
End
Close the KORG KONTROL Editor.
Edit
Undo
Returns to the state prior to the previous operation.
Redo
Returns to the state prior to executing the Undo command.
Cut
Cuts the selected scene data or control parameter.
Paste
Pastes the cut or copied content to the selected scene data or control parameter.
Clear
Clears the selected scene data or control parameter.
Preferences
Displays the Preferences dialog box.
Send
Load Scene Set
Loads the scene set from your Korg MIDI controller.
Help
About
Displays the software version of the KORG KONTROL Editor.
• If another USB device is connected, the KORG KONTROL Editor might be unable to start up, or might be unable to transfer
data. If you're unable to start up or unable to transfer data, disconnect the other USB device from your computer and try
again.
• If you are using a USB connection, make sure that the latest Korg USB-MIDI Driver is installed.
You can download the latest Korg USB-MIDI driver from the Korg website.
http://www.korg.com/
• If you’re specifying the MIDI ports manually, make sure that the MIDI port settings are correct.
• If you're using a wireless connection, and the computer is far away from the Korg MIDI controller, it might be unable to
transfer data. Place the Korg MIDI controller closer to your computer.
• If the Korg MIDI controller is using batteries, it might be unable to transfer data if you use a wireless connection when the
batteries are low. Replace the batteries and try again.
• If you are using a wireless connection, do not connect the Korg MIDI controller to a computer using a USB cable. If the Korg
MIDI controller is connected to a computer through both a USB and a wireless connection, it will not function properly.