Documentos de Académico
Documentos de Profesional
Documentos de Cultura
PG 16
PG 16
MARCA-B
MARK-B
SERVICIO EXTERIOR
P1 OUTDOOR SERVICE
M8
BASE S1 X1 S2 X2
BASE PLATE Simple Relación Simple Primary Ratio
Primaria y dos and two secondaries
170 secundarios
= = P1 P2
H1 H2
S1 X1 S2 X2 S3 X3
Dimensiones aproximadas en mm • Approximate dimensions in mm
DESCRIPCION DESCRIPTION
Transformador de intensidad toroidal, tipo pasobarra, diseñado Toroidal current transformer, window type, valid for indoor or out
para servicio interior o exterior, encapsulado en resina. Para door service. Cast resin. Designed for measurement and/or pro
medida y/o protección. tection.
Construibles bajo normas UNE, CEI, VDE, IEEE. Manufactured as per standard UNE, IEC, VDE, IEEE.
Otras normas o características especiales bajo consulta. Other standards or special technical specification on request.
TRANSFO. INTENSIDAD IFH-0 CURRENT TRANSFORMER
CARACTERISTICAS ELECTRICAS ELECTRICAL CHARACTERISTICS
UNE•IEC IEEE
•Tensión nominal de aislamiento (kV) 0,72 0,6 •Highest voltage (kV)
•Tensión máxima de servicio (kV) 0,72 0,66 •Highest voltage for equipment (kV)
•Frecuencia de utilización (Hz) 50/60 •Frequency (Hz)
•Tensión de ensayo a frecuencia industrial •Power-frequency withstand voltage
(durante 1 min) (during 1 min)
- Entre primario y secundario, este unido a masa (kV) 3 4 - On the primary and secondary (kV)
- Entre secundario y masa (kV) 3 2,5 - On the secondary winding (kV)
•Ensayo impulso tipo rayo (kV cresta) -- 10 •BIL and full wave (kV crest)
•Intensidad primaria máxima (A) 1200 •Highest primary current (A)
•Intensidad secundaria (bajo pedido 1 ó 2 A) 5A •Secondary current (1 or 2 A under purchase)
•Sobreintensidad admisible en permanencia (IN) 1,2 •Allowed continuous overcur rent (I N)
CARACTERISTICAS MECANICAS MECHANICAL CHARACTERISTICS
•Par de apriete de la tornillería •Torque
- Terminales secundarios M 6 0,3 m x kg - Secondary terminals M 6
•Tornillería de acero •Screws made of steel
•Peso aproximado 8 kg •Weight
•Bornes secundarios de latón •Secondary terminals made of brass
•Cubierta bornes secundarios transparente •Transparent secondary terminal box
(servicio interior) o aluminio (servicio exterior) (indoor service) or aluminium (outdoor service)
•Otras características, bajo consulta. •Other specifications, on request.
PRESTACIONES SERVICES
UN SECUNDARIO DOS SECUNDARIOS MEDIDA + PROTECCION
INTENSIDAD NOMINAL ONE SECONDARY TWO SECONDARY MEASURE + PROTECTION
PRIMARIA Medida•Measure Protección•Protection Medida•Measure Protección•Protection
RATED PRIMARY IEC IEC IEC IEC
CURRENT VA Cl In.Fs VA Cl Ind. VA Cl In.Fs VA Cl Ind.
100 7,5 5P 5
200 20 1 10 5P 10 5 1 10 5P 5
300 15 0,5 15 5P 10 20 1 15 5P 5
400 40 0,5 20 5P 10 15 0,5 10 5P 10
500 50 0,5 25 5P 10 15 0,5 15 5P 10
600 50 0,5 20 5P 20 20 0,5 20 5P 10
750 65 0,5 20 5P 20 30 0,5 25 5P 10
800 40 0,5 30 5P 10
1000 30 0,2 25 5P 20 50 0,5 35 5P 10
1200 30 0,2 30 5P 20 50 0,5 45 5P 10
• Estas potencias son orientativas •This rated outputs are orientative values.
•Posibilidad Doble Relación Primaria por toma secundario •Posible Double Primary Ratio by secondary tapping
(consultar potencia). (consult burden).
ISO 9001